reassign 983380 hplip 3.21.2+dfsg1-1 severity 983380 normal thanks Hello alain,
thank you for spending your time helping to make Debian better with this bug report. In the past, the error message "error: SANE: Error during device I/O (code=9)" always meant an error in the hplip package. In addition, the version hplip 3.21.2+dfsg1-1 is also heavily buggy. I therefore assign the error to the hplip package. CU Jörg Am Dienstag, dem 23.02.2021 um 09:53 +0100 schrieb alain: > Package: sane > Version: 1.0.14-16 > Severity: grave > Tags: upstream > Justification: renders package unusable > X-Debbugs-Cc: compte.perso.de-al...@bbox.fr > > last week-end tried to scan a very important document . > > no more xsane , simple-scan , hp-scan or vuescan works . > > alain@sid:~$ hp-scan > > HP Linux Imaging and Printing System (ver. 3.21.2) > Scan Utility ver. 2.2 > > Copyright (c) 2001-18 HP Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > > ----------------- > > SELECT DEVICE | > ----------------- > > Num Scan device URI > -------- ------------------------------------------------- > 0 escl:http://127.0.0.1:60000 > 1* hpaio:/usb/ENVY_5530_series?serial=CN595530XD06BX > > Enter number 0...1 for device (q=quit, <enter>=default: 1*) ? > warning: No destinations specified. Adding 'file' destination by > default. > Using device hpaio:/usb/ENVY_5530_series?serial=CN595530XD06BX > Opening connection to device... > error: SANE: Error during device I/O (code=9) > > > alain@sid:~$ hp-scan > > HP Linux Imaging and Printing System (ver. 3.21.2) > Scan Utility ver. 2.2 > > Copyright (c) 2001-18 HP Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > > ----------------- > > SELECT DEVICE | > ----------------- > > Num Scan device URI > -------- ------------------------------------------------- > 0 escl:http://127.0.0.1:60000 > 1* hpaio:/usb/ENVY_5530_series?serial=CN595530XD06BX > > Enter number 0...1 for device (q=quit, <enter>=default: 1*) ?0 > warning: No destinations specified. Adding 'file' destination by > default. > Using device escl:http://127.0.0.1:60000 > Opening connection to device... > error: SANE: Out of memory (code=10) > > alain@sid:~$ systemctl list-units "ipp-usb*" | grep service > ipp-usb.service loaded active running Daemon for IPP over USB > printer support > > > alain@sid:~$ scanimage -L > device `escl:http://127.0.0.1:60000' is a HP ENVY 5530 series > [FE04D6] (USB) > flatbed scanner > device `hpaio:/usb/ENVY_5530_series?serial=CN595530XD06BX' is a > Hewlett-Packard > ENVY_5530_series all-in-one > > your command : simple-scan escl:http://127.0.0.1:60000 was nearly > ok . > > simple-scan started to connect and , quickly , closed itself : > "cannot connect" > > alain@sid:~$ lsusb -v | grep -A 3 bInterfaceClass.*7 > Couldn't open device, some information will be missing > Couldn't open device, some information will be missing > Couldn't open device, some information will be missing > bInterfaceClass 7 Printer > bInterfaceSubClass 1 Printer > bInterfaceProtocol 4 > iInterface 0 > -- > bInterfaceClass 7 Printer > bInterfaceSubClass 1 Printer > bInterfaceProtocol 2 Bidirectional > iInterface 0 > -- > bInterfaceClass 7 Printer > bInterfaceSubClass 1 Printer > bInterfaceProtocol 4 > iInterface 0 > can't get debug descriptor: Resource temporarily unavailable > Couldn't open device, some information will be missing > -- > bInterfaceClass 7 Printer > bInterfaceSubClass 1 Printer > bInterfaceProtocol 4 > iInterface 0 > Couldn't open device, some information will be missing > Couldn't open device, some information will be missing > Couldn't open device, some information will be missing > Couldn't open device, some information will be missing > Couldn't open device, some information will be missing > Couldn't open device, some information will be missing > > That is a possible upstream bug in SANE for this device. > > alain@sid:~$ sudo apt install --reinstall sane-airscan > [sudo] Mot de passe de alain : > Lecture des listes de paquets... Fait > Construction de l'arbre des dépendances... Fait > Lecture des informations d'état... Fait > 0 mis à jour, 0 nouvellement installés, 1 réinstallés, 0 à enlever et > 9 non mis > à jour. > Il est nécessaire de prendre 117 ko dans les archives. > Après cette opération, 0 o d'espace disque supplémentaires seront > utilisés. > Réception de :1 http://deb.debian.org/debian testing/main amd64 sane- > airscan > amd64 0.99.24-1 [117 kB] > 117 ko réceptionnés en 0s (1 268 ko/s) > (Lecture de la base de données... 283524 fichiers et répertoires déjà > installés.) > Préparation du dépaquetage de .../sane-airscan_0.99.24-1_amd64.deb > ... > Dépaquetage de sane-airscan (0.99.24-1) sur (0.99.24-1) ... > Paramétrage de sane-airscan (0.99.24-1) ... > Traitement des actions différées (« triggers ») pour man-db (2.9.4-2) > ... > > alain@sid:~$ scanimage -L > device `escl:http://127.0.0.1:60000' is a HP ENVY 5530 series > [FE04D6] (USB) > flatbed scanner > device `airscan:e0:HP ENVY 5530 series [FE04D6] (USB)' is a eSCL HP > ENVY 5530 > series [FE04D6] (USB) ip=127.0.0.1 > device `hpaio:/usb/ENVY_5530_series?serial=CN595530XD06BX' is a > Hewlett-Packard > ENVY_5530_series all-in-one > > still understood nothing . > > is that what you wanted ? > > do i have to open a "sane" bug ? > > thanks to Brian Potkin . > > > > -- System Information: > Debian Release: bullseye/sid > APT prefers unstable > APT policy: (500, 'unstable'), (100, 'testing'), (100, 'stable'), > (1, > 'experimental') > Architecture: amd64 (x86_64) > Foreign Architectures: i386 > > Kernel: Linux 5.10.0-3-amd64 (SMP w/16 CPU threads) > Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE > Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), > LANGUAGE not > set > Shell: /bin/sh linked to /usr/bin/dash > Init: systemd (via /run/systemd/system) > LSM: AppArmor: enabled > > Versions of packages sane depends on: > ii libc6 2.31-9 > ii libgimp2.0 2.10.22-2 > ii libglib2.0-0 2.66.7-1 > ii libgtk2.0-0 2.24.33-1 > ii libsane1 [libsane] 1.0.31-4 > > sane recommends no packages. > > Versions of packages sane suggests: > ii gimp 2.10.22-2 -- New: GPG Fingerprint: 63E0 075F C8D4 3ABB 35AB 30EE 09F8 9F3C 8CA1 D25D GPG key (long) : 09F89F3C8CA1D25D GPG Key : 8CA1D25D CAcert Key S/N : 0E:D4:56 Old pgp Key: BE581B6E (revoked since 2014-12-31). Jörg Frings-Fürst D-54470 Lieser git: https://jff.email/cgit/ Threema: SYR8SJXB Wire: @joergfringsfuerst Skype: joergpenguin Ring: jff Telegram: @joergfringsfuerst My wish list: - Please send me a picture from the nature at your home.
signature.asc
Description: This is a digitally signed message part
