Source: python-fluids Version: 0.1.78-1 Severity: serious Justification: FTBFS on arm64 Tags: bullseye sid ftbfs Usertags: ftbfs-20201205 ftbfs-bullseye
Hi, During a rebuild of all packages in sid, your package failed to build on arm64 (I don't know if it also fails on amd64). Relevant part (hopefully): > make[1]: Entering directory '/<<PKGBUILDDIR>>' > dh_auto_build > I: pybuild base:232: /usr/bin/python3.8 setup.py build > running build > running build_py > creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/filters.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/drag.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/units.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/separator.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/packed_tower.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/two_phase_voidage.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/safety_valve.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/core.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/jet_pump.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/geometry.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/vectorized.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/__init__.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/pump.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/piping.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/mixing.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/two_phase.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/design_climate.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/fittings.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/control_valve.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/compressible.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/friction.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/packed_bed.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/flow_meter.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/particle_size_distribution.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/open_flow.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/saltation.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > copying fluids/atmosphere.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids > creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data > copying fluids/data/Miller 2E 1990 conical contractions K part 2.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data > copying fluids/data/Miller 2E 1990 conical contractions K part 1.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data > copying fluids/data/ISO 3310-1 sieves.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data > copying fluids/data/Miller 2E 1990 abrupt contraction K.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data > copying fluids/data/Miller 2E 1990 conical diffuser Kd.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data > copying fluids/data/Miller 2E 1990 entrances rounded beveled K.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data > copying fluids/data/ASTM E11 sieves.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data > copying fluids/data/Miller 2E 1990 smooth bends Kb.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data > copying fluids/data/residential power.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data > copying fluids/data/Miller 2E 1990 smooth bends outlet tangent length > correction.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data > copying fluids/data/Miller 2E 1990 smooth bends Re correction.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data > copying fluids/data/Miller 2E 1990 Kb mitre bend.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data > copying fluids/data/3 phase power.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data > copying fluids/data/isd-history-cleaned.tsv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data > creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/nrlmsise00 > copying fluids/nrlmsise00/README -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/nrlmsise00 > copying fluids/nrlmsise00/__init__.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/nrlmsise00 > copying fluids/nrlmsise00/LICENSE -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/nrlmsise00 > copying fluids/nrlmsise00/nrlmsise_00.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/nrlmsise00 > copying fluids/nrlmsise00/nrlmsise_00_header.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/nrlmsise00 > copying fluids/nrlmsise00/nrlmsise_00_data.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/nrlmsise00 > creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional > copying fluids/optional/hwm123114.bin -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional > copying fluids/optional/gd2qd.dat -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional > copying fluids/optional/hwm14.pyf -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional > copying fluids/optional/__init__.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional > copying fluids/optional/irradiance.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional > copying fluids/optional/hwm93.for -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional > copying fluids/optional/hwm93.pyf -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional > copying fluids/optional/spa.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional > copying fluids/optional/dwm07b104i.dat -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional > copying fluids/optional/pychebfun.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional > copying fluids/optional/hwm14.f90 -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional > creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/numerics > copying fluids/numerics/arrays.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/numerics > copying fluids/numerics/__init__.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/numerics > creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/constants > copying fluids/constants/constants.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/constants > copying fluids/constants/__init__.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/constants > I: pybuild base:232: /usr/bin/python3 setup.py build > running build > running build_py > creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/filters.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/drag.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/units.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/separator.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/packed_tower.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/two_phase_voidage.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/safety_valve.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/core.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/jet_pump.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/geometry.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/vectorized.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/__init__.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/pump.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/piping.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/mixing.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/two_phase.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/design_climate.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/fittings.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/control_valve.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/compressible.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/friction.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/packed_bed.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/flow_meter.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/particle_size_distribution.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/open_flow.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/saltation.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > copying fluids/atmosphere.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids > creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data > copying fluids/data/Miller 2E 1990 conical contractions K part 2.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data > copying fluids/data/Miller 2E 1990 conical contractions K part 1.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data > copying fluids/data/ISO 3310-1 sieves.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data > copying fluids/data/Miller 2E 1990 abrupt contraction K.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data > copying fluids/data/Miller 2E 1990 conical diffuser Kd.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data > copying fluids/data/Miller 2E 1990 entrances rounded beveled K.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data > copying fluids/data/ASTM E11 sieves.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data > copying fluids/data/Miller 2E 1990 smooth bends Kb.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data > copying fluids/data/residential power.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data > copying fluids/data/Miller 2E 1990 smooth bends outlet tangent length > correction.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data > copying fluids/data/Miller 2E 1990 smooth bends Re correction.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data > copying fluids/data/Miller 2E 1990 Kb mitre bend.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data > copying fluids/data/3 phase power.csv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data > copying fluids/data/isd-history-cleaned.tsv -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data > creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/nrlmsise00 > copying fluids/nrlmsise00/README -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/nrlmsise00 > copying fluids/nrlmsise00/__init__.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/nrlmsise00 > copying fluids/nrlmsise00/LICENSE -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/nrlmsise00 > copying fluids/nrlmsise00/nrlmsise_00.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/nrlmsise00 > copying fluids/nrlmsise00/nrlmsise_00_header.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/nrlmsise00 > copying fluids/nrlmsise00/nrlmsise_00_data.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/nrlmsise00 > creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional > copying fluids/optional/hwm123114.bin -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional > copying fluids/optional/gd2qd.dat -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional > copying fluids/optional/hwm14.pyf -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional > copying fluids/optional/__init__.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional > copying fluids/optional/irradiance.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional > copying fluids/optional/hwm93.for -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional > copying fluids/optional/hwm93.pyf -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional > copying fluids/optional/spa.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional > copying fluids/optional/dwm07b104i.dat -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional > copying fluids/optional/pychebfun.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional > copying fluids/optional/hwm14.f90 -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional > creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/numerics > copying fluids/numerics/arrays.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/numerics > copying fluids/numerics/__init__.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/numerics > creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/constants > copying fluids/constants/constants.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/constants > copying fluids/constants/__init__.py -> > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/constants > PYTHONPATH=. python3 -m sphinx -N -bhtml docs/ build/html # HTML generator > Running Sphinx v3.3.1 > Matplotlib created a temporary config/cache directory at > /tmp/matplotlib-l81sms3m because the default path > (/sbuild-nonexistent/.config/matplotlib) is not a writable directory; it is > highly recommended to set the MPLCONFIGDIR environment variable to a writable > directory, in particular to speed up the import of Matplotlib and to better > support multiprocessing. > making output directory... done > [autosummary] generating autosummary for: Examples/Crane TP 410 Solved > Problems/7.1 Smooth Pipe (Plastic).ipynb, Examples/Crane TP 410 Solved > Problems/7.10 Piping Systems - Steam.ipynb, Examples/Crane TP 410 Solved > Problems/7.11 Flat heating Coils - Water.ipynb, Examples/Crane TP 410 Solved > Problems/7.13 Flow given in English Units - Oil.ipynb, Examples/Crane TP 410 > Solved Problems/7.14 Bernoulli's Theorem-Water.ipynb, Examples/Crane TP 410 > Solved Problems/7.2 L, L over D and K from Kv for Conventional Type > Valves.ipynb, Examples/Crane TP 410 Solved Problems/7.29 Orifice Flow Rate > Calculation.ipynb, Examples/Crane TP 410 Solved Problems/7.3 L, L over D, K, > and Kv for Conventional Type Valves.ipynb, Examples/Crane TP 410 Solved > Problems/7.4 Venturi Type Valves.ipynb, Examples/Crane TP 410 Solved > Problems/7.5 Lift Check Valves.ipynb, ..., fluids.safety_valve.rst, > fluids.saltation.rst, fluids.separator.rst, fluids.two_phase.rst, > fluids.two_phase_voidage.rst, fluids.units.rst, fluids.vectorized.rst, > index.rst, modules.rst, tutorial.rst > building [mo]: targets for 0 po files that are out of date > building [html]: targets for 43 source files that are out of date > updating environment: [new config] 43 added, 0 changed, 0 removed > reading sources... [ 2%] Examples/Crane TP 410 Solved Problems/7.1 Smooth > Pipe (Plastic) > reading sources... [ 4%] Examples/Crane TP 410 Solved Problems/7.10 Piping > Systems - Steam > reading sources... [ 6%] Examples/Crane TP 410 Solved Problems/7.11 Flat > heating Coils - Water > reading sources... [ 9%] Examples/Crane TP 410 Solved Problems/7.13 Flow > given in English Units - Oil > reading sources... [ 11%] Examples/Crane TP 410 Solved Problems/7.14 > Bernoulli's Theorem-Water > reading sources... [ 13%] Examples/Crane TP 410 Solved Problems/7.2 L, L over > D and K from Kv for Conventional Type Valves > reading sources... [ 16%] Examples/Crane TP 410 Solved Problems/7.29 Orifice > Flow Rate Calculation > reading sources... [ 18%] Examples/Crane TP 410 Solved Problems/7.3 L, L over > D, K, and Kv for Conventional Type Valves > reading sources... [ 20%] Examples/Crane TP 410 Solved Problems/7.4 Venturi > Type Valves > reading sources... [ 23%] Examples/Crane TP 410 Solved Problems/7.5 Lift > Check Valves > reading sources... [ 25%] Examples/Crane TP 410 Solved Problems/7.6 Reduced > Port Ball Valve > reading sources... [ 27%] Examples/Crane TP 410 Solved Problems/7.7 Laminar > flow in Valves, Fittings, and Pipe - System from Example 7.6 > reading sources... [ 30%] Examples/Crane TP 410 Solved Problems/7.8 Laminar > flow in Valves, Fittings, and Pipe - SAE oil through a pipe and globe valve > reading sources... [ 32%] examples > reading sources... [ 34%] fluids > reading sources... [ 37%] fluids.atmosphere > reading sources... [ 39%] fluids.compressible > reading sources... [ 41%] fluids.control_valve > reading sources... [ 44%] fluids.core > reading sources... [ 46%] fluids.drag > reading sources... [ 48%] fluids.filters > reading sources... [ 51%] fluids.fittings > reading sources... [ 53%] fluids.flow_meter > reading sources... [ 55%] fluids.friction > reading sources... [ 58%] fluids.geometry > reading sources... [ 60%] fluids.jet_pump > reading sources... [ 62%] fluids.mixing > reading sources... [ 65%] fluids.open_flow > reading sources... [ 67%] fluids.packed_bed > reading sources... [ 69%] fluids.packed_tower > reading sources... [ 72%] fluids.particle_size_distribution > reading sources... [ 74%] fluids.piping > reading sources... [ 76%] fluids.pump > reading sources... [ 79%] fluids.safety_valve > reading sources... [ 81%] fluids.saltation > reading sources... [ 83%] fluids.separator > reading sources... [ 86%] fluids.two_phase > reading sources... [ 88%] fluids.two_phase_voidage > reading sources... [ 90%] fluids.units > reading sources... [ 93%] fluids.vectorized > reading sources... [ 95%] index > reading sources... [ 97%] modules > reading sources... [100%] tutorial > > /<<PKGBUILDDIR>>/fluids/compressible.py:docstring of > fluids.compressible.isentropic_T_rise_compression:45: WARNING: Inline > interpreted text or phrase reference start-string without end-string. > /<<PKGBUILDDIR>>/fluids/core.py:docstring of fluids.core.Stanton:43: WARNING: > Duplicate explicit target name: "re94116c74050-1". > /<<PKGBUILDDIR>>/fluids/core.py:docstring of fluids.core.Stanton:43: WARNING: > duplicate citation Re94116c74050-1, other instance in > /<<PKGBUILDDIR>>/docs/fluids.core.rst > /<<PKGBUILDDIR>>/fluids/friction.py:docstring of > fluids.friction.one_phase_dP_gravitational:2: WARNING: Inline interpreted > text or phrase reference start-string without end-string. > /<<PKGBUILDDIR>>/fluids/friction.py:docstring of > fluids.friction.one_phase_dP_dz_acceleration:2: WARNING: Unknown target name: > "2". > /<<PKGBUILDDIR>>/fluids/geometry.py:docstring of > fluids.geometry.PlateExchanger.plate_enlargement_factor_analytical:27: > WARNING: Block quote ends without a blank line; unexpected unindent. > /<<PKGBUILDDIR>>/fluids/jet_pump.py:docstring of > fluids.jet_pump.liquid_jet_pump:127: WARNING: Unexpected indentation. > /<<PKGBUILDDIR>>/fluids/packed_bed.py:docstring of > fluids.packed_bed.Brauer:62: WARNING: Duplicate explicit target name: > "re6bc2120fa12-2". > /<<PKGBUILDDIR>>/fluids/packed_bed.py:docstring of > fluids.packed_bed.Harrison_Brunner_Hecker:64: WARNING: Unexpected indentation. > /<<PKGBUILDDIR>>/fluids/packed_bed.py:docstring of > fluids.packed_bed.Brauer:62: WARNING: duplicate citation Re6bc2120fa12-2, > other instance in /<<PKGBUILDDIR>>/docs/fluids.packed_bed.rst > /<<PKGBUILDDIR>>/fluids/packed_bed.py:docstring of > fluids.packed_bed.Brauer:2: WARNING: Unknown target name: "3". > /<<PKGBUILDDIR>>/fluids/packed_bed.py:docstring of > fluids.packed_bed.Brauer:51: WARNING: Unknown target name: "3". > /<<PKGBUILDDIR>>/fluids/particle_size_distribution.py:docstring of > fluids.particle_size_distribution.ParticleSizeDistribution.vssa:7: WARNING: > Explicit markup ends without a blank line; unexpected unindent. > /<<PKGBUILDDIR>>/fluids/particle_size_distribution.py:docstring of > fluids.particle_size_distribution.ParticleSizeDistribution.vssa:8: WARNING: > Unexpected section title. > > Returns > ------- > /<<PKGBUILDDIR>>/fluids/two_phase_voidage.py:docstring of > fluids.two_phase_voidage.Lin_Kwok:2: WARNING: Unknown target name: "3". > /<<PKGBUILDDIR>>/docs/tutorial.rst:640: WARNING: Inline interpreted text or > phrase reference start-string without end-string. > looking for now-outdated files... none found > pickling environment... done > checking consistency... done > preparing documents... done > writing output... [ 2%] Examples/Crane TP 410 Solved Problems/7.1 Smooth > Pipe (Plastic) > writing output... [ 4%] Examples/Crane TP 410 Solved Problems/7.10 Piping > Systems - Steam > writing output... [ 6%] Examples/Crane TP 410 Solved Problems/7.11 Flat > heating Coils - Water > writing output... [ 9%] Examples/Crane TP 410 Solved Problems/7.13 Flow > given in English Units - Oil > writing output... [ 11%] Examples/Crane TP 410 Solved Problems/7.14 > Bernoulli's Theorem-Water > writing output... [ 13%] Examples/Crane TP 410 Solved Problems/7.2 L, L over > D and K from Kv for Conventional Type Valves > writing output... [ 16%] Examples/Crane TP 410 Solved Problems/7.29 Orifice > Flow Rate Calculation > writing output... [ 18%] Examples/Crane TP 410 Solved Problems/7.3 L, L over > D, K, and Kv for Conventional Type Valves > writing output... [ 20%] Examples/Crane TP 410 Solved Problems/7.4 Venturi > Type Valves > writing output... [ 23%] Examples/Crane TP 410 Solved Problems/7.5 Lift Check > Valves > writing output... [ 25%] Examples/Crane TP 410 Solved Problems/7.6 Reduced > Port Ball Valve > writing output... [ 27%] Examples/Crane TP 410 Solved Problems/7.7 Laminar > flow in Valves, Fittings, and Pipe - System from Example 7.6 > writing output... [ 30%] Examples/Crane TP 410 Solved Problems/7.8 Laminar > flow in Valves, Fittings, and Pipe - SAE oil through a pipe and globe valve > writing output... [ 32%] examples > writing output... [ 34%] fluids > writing output... [ 37%] fluids.atmosphere > writing output... [ 39%] fluids.compressible > writing output... [ 41%] fluids.control_valve > writing output... [ 44%] fluids.core > writing output... [ 46%] fluids.drag > writing output... [ 48%] fluids.filters > writing output... [ 51%] fluids.fittings > writing output... [ 53%] fluids.flow_meter > writing output... [ 55%] fluids.friction > writing output... [ 58%] fluids.geometry > writing output... [ 60%] fluids.jet_pump > writing output... [ 62%] fluids.mixing > writing output... [ 65%] fluids.open_flow > writing output... [ 67%] fluids.packed_bed > writing output... [ 69%] fluids.packed_tower > writing output... [ 72%] fluids.particle_size_distribution > writing output... [ 74%] fluids.piping > writing output... [ 76%] fluids.pump > writing output... [ 79%] fluids.safety_valve > writing output... [ 81%] fluids.saltation > writing output... [ 83%] fluids.separator > writing output... [ 86%] fluids.two_phase > writing output... [ 88%] fluids.two_phase_voidage > writing output... [ 90%] fluids.units > writing output... [ 93%] fluids.vectorized > writing output... [ 95%] index > writing output... [ 97%] modules > writing output... [100%] tutorial > > /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.1 Smooth Pipe > (Plastic).ipynb:: WARNING: Pygments lexer name 'ipython2' is not known > /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.10 Piping > Systems - Steam.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known > /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.10 Piping > Systems - Steam.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known > /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.10 Piping > Systems - Steam.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known > /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.11 Flat heating > Coils - Water.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known > /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.11 Flat heating > Coils - Water.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known > /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.13 Flow given > in English Units - Oil.ipynb:: WARNING: Pygments lexer name 'ipython2' is not > known > /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.13 Flow given > in English Units - Oil.ipynb:: WARNING: Pygments lexer name 'ipython2' is not > known > /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.14 Bernoulli's > Theorem-Water.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known > /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.14 Bernoulli's > Theorem-Water.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known > /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.2 L, L over D > and K from Kv for Conventional Type Valves.ipynb:: WARNING: Pygments lexer > name 'ipython2' is not known > /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.29 Orifice Flow > Rate Calculation.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known > /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.29 Orifice Flow > Rate Calculation.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known > /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.29 Orifice Flow > Rate Calculation.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known > /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.3 L, L over D, > K, and Kv for Conventional Type Valves.ipynb:: WARNING: Pygments lexer name > 'ipython2' is not known > /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.4 Venturi Type > Valves.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known > /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.5 Lift Check > Valves.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known > /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.6 Reduced Port > Ball Valve.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known > /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.6 Reduced Port > Ball Valve.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known > /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.7 Laminar flow > in Valves, Fittings, and Pipe - System from Example 7.6.ipynb:: WARNING: > Pygments lexer name 'ipython2' is not known > /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.8 Laminar flow > in Valves, Fittings, and Pipe - SAE oil through a pipe and globe > valve.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known > /<<PKGBUILDDIR>>/docs/tutorial.rst:357: WARNING: undefined label: <tank> (if > the link has no caption the label must precede a section header) > generating indices... genindex py-modindex done > highlighting module code... [ 4%] fluids.atmosphere > highlighting module code... [ 8%] fluids.compressible > highlighting module code... [ 13%] fluids.control_valve > highlighting module code... [ 17%] fluids.core > highlighting module code... [ 21%] fluids.drag > highlighting module code... [ 26%] fluids.filters > highlighting module code... [ 30%] fluids.fittings > highlighting module code... [ 34%] fluids.flow_meter > highlighting module code... [ 39%] fluids.friction > highlighting module code... [ 43%] fluids.geometry > highlighting module code... [ 47%] fluids.jet_pump > highlighting module code... [ 52%] fluids.mixing > highlighting module code... [ 56%] fluids.open_flow > highlighting module code... [ 60%] fluids.packed_bed > highlighting module code... [ 65%] fluids.packed_tower > highlighting module code... [ 69%] fluids.particle_size_distribution > highlighting module code... [ 73%] fluids.piping > highlighting module code... [ 78%] fluids.pump > highlighting module code... [ 82%] fluids.safety_valve > highlighting module code... [ 86%] fluids.saltation > highlighting module code... [ 91%] fluids.separator > highlighting module code... [ 95%] fluids.two_phase > highlighting module code... [100%] fluids.two_phase_voidage > > writing additional pages... search done > copying images... [ 4%] fittings/bend_miter.png > copying images... [ 8%] ../build/html/plot_directive/plots/bend_miter.png > copying images... [ 12%] fittings/bend_rounded.png > copying images... [ 16%] > ../build/html/plot_directive/plots/bend_rounded_Crane.png > copying images... [ 20%] fittings/contraction_beveled.png > copying images... [ 25%] fittings/contraction_conical.png > copying images... [ 29%] > ../build/html/plot_directive/plots/contraction_conical.png > copying images... [ 33%] fittings/contraction_round.png > copying images... [ 37%] > ../build/html/plot_directive/plots/contraction_round.png > copying images... [ 41%] fittings/contraction_sharp.png > copying images... [ 45%] fittings/diffuser_conical.png > copying images... [ 50%] > ../build/html/plot_directive/plots/diffuser_conical.png > copying images... [ 54%] fittings/curved_wall_diffuser.png > copying images... [ 58%] fittings/entrance_mounted_at_an_angle.png > copying images... [ 62%] fittings/flush_mounted_beveled_entrance.png > copying images... [ 66%] > ../build/html/plot_directive/plots/entrance_beveled.png > copying images... [ 70%] fittings/flush_mounted_beveled_orifice_entrance.png > copying images... [ 75%] fittings/sharp_edged_entrace_extended_mount.png > copying images... [ 79%] > ../build/html/plot_directive/plots/entrance_distance.png > copying images... [ 83%] fittings/flush_mounted_rounded_entrance.png > copying images... [ 87%] > ../build/html/plot_directive/plots/entrance_rounded.png > copying images... [ 91%] fittings/flush_mounted_sharp_edged_entrance.png > copying images... [ 95%] fittings/flush_mounted_exit.png > copying images... [100%] ../build/html/plot_directive/plots/ft_Crane.png > > copying static files... done > copying extra files... done > dumping search index in English (code: en)... done > dumping object inventory... done > build succeeded, 38 warnings. > > The HTML pages are in build/html. > make[1]: Leaving directory '/<<PKGBUILDDIR>>' > dh_auto_test -O--buildsystem=pybuild -O--test-pytest > I: pybuild base:232: cd /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build; > python3.8 -m pytest -k-online -k-slow > ============================= test session starts > ============================== > platform linux -- Python 3.8.6, pytest-4.6.11, py-1.9.0, pluggy-0.13.0 > rootdir: /<<PKGBUILDDIR>>, inifile: pytest.ini > plugins: cov-2.8.1 > collected 460 items / 33 deselected / 427 selected > > tests/test_atmosphere.py ..ss.s. [ > 1%] > tests/test_compressible.py ................. [ > 5%] > tests/test_control_valve.py .......FF [ > 7%] > tests/test_core.py ............... [ > 11%] > tests/test_design_climate.py ..... [ > 12%] > tests/test_drag.py ..... [ > 13%] > tests/test_filters.py .. [ > 14%] > tests/test_fittings.py .................................... [ > 22%] > tests/test_fittings_fits.py .......... [ > 24%] > tests/test_flow_meter.py .................................. [ > 32%] > tests/test_friction.py ................................ [ > 40%] > tests/test_geometry.py .............. [ > 43%] > tests/test_jet_pump.py . [ > 43%] > tests/test_mixing.py . [ > 44%] > tests/test_numerics.py ................ [ > 47%] > tests/test_open_flow.py . [ > 48%] > tests/test_packed_bed.py .. [ > 48%] > tests/test_packed_tower.py ..... [ > 49%] > tests/test_particle_size_distribution.py ........................ [ > 55%] > tests/test_piping.py .. [ > 55%] > tests/test_pump.py ........... [ > 58%] > tests/test_safety_valve.py . [ > 58%] > tests/test_saltation.py ....... [ > 60%] > tests/test_separator.py ..... [ > 61%] > tests/test_two_phase.py ............................. [ > 68%] > tests/test_two_phase_voidage.py ...................................... [ > 77%] > tests/test_units.py ........ [ > 78%] > tests/test_vectorized.py . [ > 79%] > tests/spa/test_spa.py ...........................................sssssss [ > 90%] > sssssssssssssssssssssssssssssssssssssss > [100%] > > =================================== FAILURES > =================================== > ___________________________ test_opening_quick_data > ____________________________ > > def test_opening_quick_data(): > from fluids.control_valve import opening_quick_tck, opening_quick, > frac_CV_quick > tck_recalc = splrep(opening_quick, frac_CV_quick, k=3, s=0) > > [assert_allclose(i, j) for i, j in zip(opening_quick_tck, tck_recalc)] > > tests/test_control_valve.py:331: > _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > _ > > .0 = <zip object at 0xffffb568fdc0> > > > [assert_allclose(i, j) for i, j in zip(opening_quick_tck, tck_recalc)] > E AssertionError: > E Not equal to tolerance rtol=1e-07, atol=0 > E > E Mismatched elements: 1 / 33 (3.03%) > E Max absolute difference: 4.4408921e-16 > E Max relative difference: 2.93815384 > E x: array([-3.247926e-19, 3.765096e-02, 5.461616e-02, 1.265786e-01, > E 1.711511e-01, 2.075234e-01, 2.708406e-01, 3.420896e-01, > E 3.873084e-01, 4.656002e-01, 5.196996e-01, 5.907033e-01,... > E y: array([1.675783e-19, 3.765096e-02, 5.461616e-02, 1.265786e-01, > E 1.711511e-01, 2.075234e-01, 2.708406e-01, 3.420896e-01, > E 3.873084e-01, 4.656002e-01, 5.196996e-01, 5.907033e-01,... > > tests/test_control_valve.py:331: AssertionError > ___________________________ test_opening_equal_data > ____________________________ > > def test_opening_equal_data(): > from fluids.control_valve import opening_equal, frac_CV_equal, > opening_equal_tck > tck_recalc = splrep(opening_equal, frac_CV_equal, k=3, s=0) > > [assert_allclose(i, j) for i, j in zip(opening_equal_tck, tck_recalc)] > > tests/test_control_valve.py:336: > _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > _ > > .0 = <zip object at 0xffffb5924f40> > > > [assert_allclose(i, j) for i, j in zip(opening_equal_tck, tck_recalc)] > E AssertionError: > E Not equal to tolerance rtol=1e-07, atol=0 > E > E Mismatched elements: 1 / 29 (3.45%) > E Max absolute difference: 6.66133815e-16 > E Max relative difference: 0.65800271 > E x: array([1.352259e-19, 4.087874e-03, 1.437415e-02, 1.645548e-02, > E 2.494685e-02, 3.592972e-02, 4.071012e-02, 5.451847e-02, > E 6.976905e-02, 7.587146e-02, 9.854858e-02, 1.238160e-01,... > E y: array([8.155952e-20, 4.087874e-03, 1.437415e-02, 1.645548e-02, > E 2.494685e-02, 3.592972e-02, 4.071012e-02, 5.451847e-02, > E 6.976905e-02, 7.587146e-02, 9.854858e-02, 1.238160e-01,... > > tests/test_control_valve.py:336: AssertionError > =============================== warnings summary > =============================== > fluids/optional/pychebfun.py:424 > > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional/pychebfun.py:424: > DeprecationWarning: invalid escape sequence \i > """ > > .pybuild/cpython3_3.8_fluids/build/tests/test_open_flow.py::test_open_flow > > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/tests/test_open_flow.py:69: > VisibleDeprecationWarning: Creating an ndarray from ragged nested sequences > (which is a list-or-tuple of lists-or-tuples-or ndarrays with different > lengths or shapes) is deprecated. If you meant to do this, you must specify > 'dtype=object' when creating the ndarray > n_tot = np.sum(np.concatenate(np.array([list(val.values()) for thing in > n_dicts for val in thing.values()]))) > > .pybuild/cpython3_3.8_fluids/build/tests/test_units.py::test_sample_cases > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/units.py:202: > DeprecationWarning: Using or importing the ABCs from 'collections' instead of > from 'collections.abc' is deprecated since Python 3.3, and in 3.9 it will > stop working > elif isinstance(result, collections.Iterable): > > -- Docs: https://docs.pytest.org/en/latest/warnings.html > = 2 failed, 376 passed, 49 skipped, 33 deselected, 3 warnings in 3.30 seconds > == > E: pybuild pybuild:353: test: plugin distutils failed with: exit code=1: cd > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build; python3.8 -m pytest > -k-online -k-slow > I: pybuild base:232: cd /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build; > python3.9 -m pytest -k-online -k-slow > ============================= test session starts > ============================== > platform linux -- Python 3.9.1rc1, pytest-4.6.11, py-1.9.0, pluggy-0.13.0 > rootdir: /<<PKGBUILDDIR>>, inifile: pytest.ini > plugins: cov-2.8.1 > collected 460 items / 33 deselected / 427 selected > > tests/test_atmosphere.py ..ss.s. [ > 1%] > tests/test_compressible.py ................. [ > 5%] > tests/test_control_valve.py .......FF [ > 7%] > tests/test_core.py ............... [ > 11%] > tests/test_design_climate.py ..... [ > 12%] > tests/test_drag.py ..... [ > 13%] > tests/test_filters.py .. [ > 14%] > tests/test_fittings.py .................................... [ > 22%] > tests/test_fittings_fits.py .......... [ > 24%] > tests/test_flow_meter.py .................................. [ > 32%] > tests/test_friction.py ................................ [ > 40%] > tests/test_geometry.py .............. [ > 43%] > tests/test_jet_pump.py . [ > 43%] > tests/test_mixing.py . [ > 44%] > tests/test_numerics.py ................ [ > 47%] > tests/test_open_flow.py . [ > 48%] > tests/test_packed_bed.py .. [ > 48%] > tests/test_packed_tower.py ..... [ > 49%] > tests/test_particle_size_distribution.py ........................ [ > 55%] > tests/test_piping.py .. [ > 55%] > tests/test_pump.py ........... [ > 58%] > tests/test_safety_valve.py . [ > 58%] > tests/test_saltation.py ....... [ > 60%] > tests/test_separator.py ..... [ > 61%] > tests/test_two_phase.py ............................. [ > 68%] > tests/test_two_phase_voidage.py ...................................... [ > 77%] > tests/test_units.py ........ [ > 78%] > tests/test_vectorized.py . [ > 79%] > tests/spa/test_spa.py ...........................................sssssss [ > 90%] > sssssssssssssssssssssssssssssssssssssss > [100%] > > =================================== FAILURES > =================================== > ___________________________ test_opening_quick_data > ____________________________ > > def test_opening_quick_data(): > from fluids.control_valve import opening_quick_tck, opening_quick, > frac_CV_quick > tck_recalc = splrep(opening_quick, frac_CV_quick, k=3, s=0) > > [assert_allclose(i, j) for i, j in zip(opening_quick_tck, tck_recalc)] > > tests/test_control_valve.py:331: > _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > _ > > .0 = <zip object at 0xffff863b3fc0> > > > [assert_allclose(i, j) for i, j in zip(opening_quick_tck, tck_recalc)] > E AssertionError: > E Not equal to tolerance rtol=1e-07, atol=0 > E > E Mismatched elements: 1 / 33 (3.03%) > E Max absolute difference: 4.4408921e-16 > E Max relative difference: 2.93815384 > E x: array([-3.247926e-19, 3.765096e-02, 5.461616e-02, 1.265786e-01, > E 1.711511e-01, 2.075234e-01, 2.708406e-01, 3.420896e-01, > E 3.873084e-01, 4.656002e-01, 5.196996e-01, 5.907033e-01,... > E y: array([1.675783e-19, 3.765096e-02, 5.461616e-02, 1.265786e-01, > E 1.711511e-01, 2.075234e-01, 2.708406e-01, 3.420896e-01, > E 3.873084e-01, 4.656002e-01, 5.196996e-01, 5.907033e-01,... > > tests/test_control_valve.py:331: AssertionError > ___________________________ test_opening_equal_data > ____________________________ > > def test_opening_equal_data(): > from fluids.control_valve import opening_equal, frac_CV_equal, > opening_equal_tck > tck_recalc = splrep(opening_equal, frac_CV_equal, k=3, s=0) > > [assert_allclose(i, j) for i, j in zip(opening_equal_tck, tck_recalc)] > > tests/test_control_valve.py:336: > _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > _ > > .0 = <zip object at 0xffff8645b840> > > > [assert_allclose(i, j) for i, j in zip(opening_equal_tck, tck_recalc)] > E AssertionError: > E Not equal to tolerance rtol=1e-07, atol=0 > E > E Mismatched elements: 1 / 29 (3.45%) > E Max absolute difference: 6.66133815e-16 > E Max relative difference: 0.65800271 > E x: array([1.352259e-19, 4.087874e-03, 1.437415e-02, 1.645548e-02, > E 2.494685e-02, 3.592972e-02, 4.071012e-02, 5.451847e-02, > E 6.976905e-02, 7.587146e-02, 9.854858e-02, 1.238160e-01,... > E y: array([8.155952e-20, 4.087874e-03, 1.437415e-02, 1.645548e-02, > E 2.494685e-02, 3.592972e-02, 4.071012e-02, 5.451847e-02, > E 6.976905e-02, 7.587146e-02, 9.854858e-02, 1.238160e-01,... > > tests/test_control_valve.py:336: AssertionError > =============================== warnings summary > =============================== > fluids/optional/pychebfun.py:424 > > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional/pychebfun.py:424: > DeprecationWarning: invalid escape sequence \i > """ > > .pybuild/cpython3_3.9_fluids/build/tests/test_open_flow.py::test_open_flow > > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/tests/test_open_flow.py:69: > VisibleDeprecationWarning: Creating an ndarray from ragged nested sequences > (which is a list-or-tuple of lists-or-tuples-or ndarrays with different > lengths or shapes) is deprecated. If you meant to do this, you must specify > 'dtype=object' when creating the ndarray > n_tot = np.sum(np.concatenate(np.array([list(val.values()) for thing in > n_dicts for val in thing.values()]))) > > .pybuild/cpython3_3.9_fluids/build/tests/test_units.py::test_sample_cases > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/units.py:202: > DeprecationWarning: Using or importing the ABCs from 'collections' instead of > from 'collections.abc' is deprecated since Python 3.3, and in 3.10 it will > stop working > elif isinstance(result, collections.Iterable): > > -- Docs: https://docs.pytest.org/en/latest/warnings.html > = 2 failed, 376 passed, 49 skipped, 33 deselected, 3 warnings in 3.25 seconds > == > E: pybuild pybuild:353: test: plugin distutils failed with: exit code=1: cd > /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build; python3.9 -m pytest > -k-online -k-slow > dh_auto_test: error: pybuild --test --test-pytest -i python{version} -p "3.8 > 3.9" returned exit code 13 The full build log is available from: http://qa-logs.debian.net/2020/12/05/python-fluids_0.1.78-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! If you reassign this bug to another package, please marking it as 'affects'-ing this package. See https://www.debian.org/Bugs/server-control#affects If you fail to reproduce this, please provide a build log and diff it with me so that we can identify if something relevant changed in the meantime. About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures.
