Package: installation-reports
Severity: grave
Tags: d-i
Justification: renders package unusable
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
-- Package-specific info:
Boot method: disk
Image version:
http://ftp.nl.debian.org/debian/dists/testing/main/installer-armel/current/images/kirkwood/network-console/buffalo/ls-xhl/
Date: <November, 24th, 2020>
Machine: Buffalo LS-XHL
Partitions:
Disk /dev/sdc: 465.78 GiB, 500107862016 bytes, 976773168 sectors
Disk model: 18AS
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: E65CCA75-BACC-4473-BD2A-96F829358737
Device Start End Sectors Size Type
/dev/sdc1 2048 1050623 1048576 512M Linux filesystem
/dev/sdc2 1050624 3147775 2097152 1G Linux swap
/dev/sdc3 3147776 24119295 20971520 10G Linux filesystem
/dev/sdc4 24119296 976773119 952653824 454.3G Linux filesystem
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [E]
Detect network card: [ ]
Configure network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
Hello, to make the installer working on this kind of hardware (LS-XHL from
Buffalo NAS compagny), I create some partitions like above on the disk,
in the GPT disk partition format. I put the three files explicitly created for
this hardware, picked here
http://ftp.nl.debian.org/debian/dists/buster/main/installer-armel/20190702/images/kirkwood/network-console/buffalo/ls-xhl/
.
The normal behavior with this installer is to boot on the disk, the hardware
detects well the kernel and his initrd,
the installer boot process stop and restart immediately the disk (Not a good
thing in my mind, it's stress the disk a little bit but it's only one time
during the boot process).
Then the installer start on ssh and I can install the Debian 10 in a good way.
At the end the Debian 10 system is installed and the reboot
is working like a charm, always 1 time disk start/stop at boot, but after that,
no problem a all, the system is working and stable.
For the installer published in testing or daily-image picked here
http://ftp.nl.debian.org/debian/dists/testing/main/installer-armel/current/images/kirkwood/network-console/buffalo/ls-xhl/
,
The boot process begin well, the hardware detect well the kernel and his
initrd, make a stop/start of the disk (like above).
After that the ssh connection is possible but the disk make many many
stop/start operations.
The installer seems to continue but during the base installation, it's hangs
due to disks problems due to inopportune disk start/stop.
This problem is not a disk-specific problem, I'd tried this on 2 other disks
which are differrents brands and models and it make the same bug.
Keep it up guys, you make a very gigantic work.
The information below this line is not from the LS-XHL Buffalo NAS.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to sub...@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
==============================================
Installer hardware-summary:
==============================================
-- System Information:
Debian Release: 10.6
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.19.0-12-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8),
LANGUAGE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Init: systemd (via /run/systemd/system)
