Javier Fernandez-Sanguino <j...@computer.org> writes:
Could you please confirm if the 'eth0' interface is available in the
system? One possible reason for startup failing is that the
interface is not the correct one (administrator should configure the
proper one via debconf).
Dear Javier,
the 'eth0' interface is available:
$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP group default qlen 1000
link/ether 74:d4:35:f8:9a:70 brd ff:ff:ff:ff:ff:ff
altname enp0s25
inet 192.168.1.27/24 brd 192.168.1.255 scope global dynamic eth0
valid_lft 27084sec preferred_lft 27084sec
inet6 fe80::76d4:35ff:fef8:9a70/64 scope link
valid_lft forever preferred_lft forever
Best regards
Toto
