Package: src:linux
Version: 5.6.7-1
Severity: grave
Justification: renders package unusable
Dear Maintainer,
Since upgrade of 2020-05-18 system started to hang all the time without any
reason,
forcing me to reboot computer each time loosing my work.
-- Package-specific info:
** Version:
Linux version 5.6.0-1-amd64 (debian-ker...@lists.debian.org) (gcc version 9.3.0
(Debian 9.3.0-11)) #1 SMP Debian 5.6.7-1 (2020-04-29)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-5.6.0-1-amd64
root=UUID=284f2b06-aeb5-4d51-bffe-ddb426f4c63f ro
** Not tainted
** Kernel log:
[ 10.387864] systemd[1]: Mounted Huge Pages File System.
[ 10.390388] systemd[1]: Mounted POSIX Message Queue File System.
[ 10.394777] systemd[1]: Mounted Kernel Debug File System.
[ 10.399670] systemd[1]: Mounted Kernel Trace File System.
[ 10.404568] systemd[1]: Finished Create list of static device nodes for the
current kernel.
[ 10.427001] RPC: Registered named UNIX socket transport module.
[ 10.429045] RPC: Registered udp transport module.
[ 10.431114] RPC: Registered tcp transport module.
[ 10.433100] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.437145] systemd[1]: Mounted RPC Pipe File System.
[ 10.440980] systemd[1]: Starting pNFS block layout mapping daemon...
[ 10.487925] systemd[1]: Finished Load Kernel Modules.
[ 10.490130] systemd[1]: Condition check resulted in FUSE Control File System
being skipped.
[ 10.490243] systemd[1]: Condition check resulted in Kernel Configuration
File System being skipped.
[ 10.493417] systemd[1]: Starting Apply Kernel Variables...
[ 10.516173] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 10.522665] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 10.525011] systemd[1]: Started pNFS block layout mapping daemon.
[ 10.646829] systemd[1]: Condition check resulted in Rebuild Hardware
Database being skipped.
[ 10.648586] systemd[1]: Condition check resulted in Platform Persistent
Storage Archival being skipped.
[ 10.651696] systemd[1]: Starting Load/Save Random Seed...
[ 10.655199] systemd[1]: Starting Create System Users...
[ 10.779957] systemd[1]: Finished udev Coldplug all Devices.
[ 10.816807] systemd[1]: Starting Helper to synchronize boot up for
ifupdown...
[ 10.828057] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 10.831924] systemd[1]: Mounted NFSD configuration filesystem.
[ 10.860106] systemd[1]: Finished Apply Kernel Variables.
[ 10.930500] systemd[1]: Finished Load/Save Random Seed.
[ 11.041107] systemd[1]: Finished Set the console keyboard layout.
[ 11.050969] systemd[1]: Finished Create System Users.
[ 11.056564] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 11.090135] systemd[1]: Started Journal Service.
[ 11.119693] systemd-journald[258]: Received client request to flush runtime
journal.
[ 11.379257] systemd-journald[258]: File
/var/log/journal/a7cfea2033ec4c4182a6354cbc46c69c/system.journal corrupted or
uncleanly shut down, renaming and replacing.
[ 13.136231] parport_pc 00:03: reported by Plug and Play ACPI
[ 13.137946] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 13.377785] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 13.516053] ppdev: user-space parallel port driver
[ 13.556030] iTCO_vendor_support: vendor-support=0
[ 13.645501] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 13.647259] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860)
[ 13.649190] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.563063] intel_powerclamp: No package C-state available
[ 14.605586] intel_powerclamp: No package C-state available
[ 14.641855] intel_powerclamp: No package C-state available
[ 14.680160] intel_powerclamp: No package C-state available
[ 15.115708] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S:
line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
[ 15.117461] snd_hda_codec_via hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 15.119133] snd_hda_codec_via hdaudioC0D0: hp_outs=1
(0x1d/0x0/0x0/0x0/0x0)
[ 15.120838] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
[ 15.122623] snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x0
[ 15.124284] snd_hda_codec_via hdaudioC0D0: inputs:
[ 15.125939] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
[ 15.127550] snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
[ 15.129180] snd_hda_codec_via hdaudioC0D0: Line=0x1b
[ 15.130763] snd_hda_codec_via hdaudioC0D0: CD=0x1f
[ 15.132384] Adding 2539516k swap on /dev/sda2. Priority:-2 extents:1
across:2539516k FS
[ 15.148279] input: HDA Intel Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 15.150830] input: HDA Intel Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 15.153555] input: HDA Intel Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 15.156024] input: HDA Intel Line Out Front as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 15.158272] input: HDA Intel Line Out Surround as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 15.160532] input: HDA Intel Line Out CLFE as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 15.162512] input: HDA Intel Line Out Side as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 15.164766] input: HDA Intel Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 16.375223] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts:
(null)
[ 16.988740] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
(null)
[ 18.177221] audit: type=1400 audit(1590626825.077:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-senddoc"
pid=437 comm="apparmor_parser"
[ 18.194423] audit: type=1400 audit(1590626825.093:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=438
comm="apparmor_parser"
[ 18.196236] audit: type=1400 audit(1590626825.093:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_filter" pid=438
comm="apparmor_parser"
[ 18.197901] audit: type=1400 audit(1590626825.093:5): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_groff" pid=438
comm="apparmor_parser"
[ 18.229841] audit: type=1400 audit(1590626825.129:6): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-oopslash"
pid=439 comm="apparmor_parser"
[ 18.247192] audit: type=1400 audit(1590626825.145:7): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport"
pid=443 comm="apparmor_parser"
[ 18.249572] audit: type=1400 audit(1590626825.149:8): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=442
comm="apparmor_parser"
[ 18.251264] audit: type=1400 audit(1590626825.149:9): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod"
pid=442 comm="apparmor_parser"
[ 18.303320] audit: type=1400 audit(1590626825.201:10): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=440
comm="apparmor_parser"
[ 18.355991] audit: type=1400 audit(1590626825.257:11): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lsb_release" pid=445
comm="apparmor_parser"
[ 20.653638] enp4s1: setting full-duplex.
[ 20.655477] enp4s0: setting half-duplex.
[ 21.463549] RTL8211B Gigabit Ethernet r8169-100:00: attached PHY driver
[RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[ 21.577087] r8169 0000:01:00.0 enp1s0: Link is Down
[ 23.164417] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ)
flags 0x0 phys_seg 1 prio class 0
[ 23.166043] floppy: error 10 while reading block 0
[ 23.208547] r8169 0000:01:00.0 enp1s0: Link is Up - 100Mbps/Full - flow
control off
[ 23.210187] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[ 35.532169] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ)
flags 0x0 phys_seg 1 prio class 0
[ 35.533771] floppy: error 10 while reading block 0
[ 47.883967] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ)
flags 0x0 phys_seg 1 prio class 0
[ 47.885648] floppy: error 10 while reading block 0
[ 49.122156] kauditd_printk_skb: 8 callbacks suppressed
[ 49.122158] audit: type=1400 audit(1590626856.025:20): apparmor="DENIED"
operation="open" profile="/usr/sbin/ntpd" name="/run/systemd/userdb/" pid=631
comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 50.181909] NFSD: Using UMH upcall client tracking operations.
[ 50.183401] NFSD: starting 90-second grace period (net f0000098)
[ 58.760939] fuse: init (API version 7.31)
[ 60.155575] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ)
flags 0x0 phys_seg 1 prio class 0
[ 60.155582] floppy: error 10 while reading block 0
[ 73.710023] rfkill: input handler disabled
[ 77.926771] rfkill: input handler enabled
[ 82.760293] rfkill: input handler disabled
[ 84.382713] traps: ibus-x11[1203] general protection fault ip:7f5f8b713e16
sp:7fff8af07550 error:0 in libc-2.30.so[7f5f8b6fb000+14a000]
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0901
board_vendor: ASUSTeK Computer INC.
board_name: P5QL-CM
board_version: Rev X.0x
** Loaded modules:
fuse
rfkill
nft_counter
ipt_REJECT
nf_reject_ipv4
xt_state
xt_conntrack
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
libcrc32c
nft_compat
nf_tables
nfnetlink
binfmt_misc
snd_hda_codec_via
snd_hda_codec_generic
ledtrig_audio
snd_hda_intel
snd_intel_dspcfg
snd_hda_codec
coretemp
joydev
kvm_intel
snd_hda_core
kvm
snd_hwdep
iTCO_wdt
snd_pcm
irqbypass
iTCO_vendor_support
ppdev
sg
watchdog
snd_timer
serio_raw
evdev
snd
asus_atk0110
parport_pc
parport
soundcore
acpi_cpufreq
nfsd
auth_rpcgss
nfs_acl
lockd
grace
sunrpc
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
hid_generic
usbhid
hid
sd_mod
t10_pi
crc_t10dif
crct10dif_generic
crct10dif_common
ata_generic
i915
video
i2c_algo_bit
pata_jmicron
ata_piix
drm_kms_helper
cec
libata
i2c_i801
3c59x
mii
r8169
drm
realtek
ehci_pci
uhci_hcd
scsi_mod
lpc_ich
libphy
mfd_core
ehci_hcd
usbcore
usb_common
floppy
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller
[8086:2e20] (rev 03)
Subsystem: ASUSTeK Computer Inc. 4 Series Chipset DRAM Controller
[1043:8336]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset
Integrated Graphics Controller [8086:2e22] (rev 03) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. 4 Series Chipset Integrated Graphics
Controller [1043:8336]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at bc00 [size=8]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset
Integrated Graphics Controller [8086:2e23] (rev 03)
Subsystem: ASUSTeK Computer Inc. 4 Series Chipset Integrated Graphics
Controller [1043:8336]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at b480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at b800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe3fbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio
Controller [8086:3a3e]
Subsystem: ASUSTeK Computer Inc. 82801JI (ICH10 Family) HD Audio
Controller [1043:8420]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at fe3f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff [size=4K]
Memory behind bridge: 9de00000-9dffffff [size=2M]
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
[size=1M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff [size=4K]
Memory behind bridge: fea00000-feafffff [size=1M]
Prefetchable memory behind bridge: 00000000a0000000-00000000a01fffff
[size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 26
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff [size=4K]
Memory behind bridge: fe900000-fe9fffff [size=1M]
Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff
[size=1M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at b000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe3fb800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000e000-0000efff [size=4K]
Memory behind bridge: feb00000-febfffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface
Controller [8086:3a18]
Subsystem: ASUSTeK Computer Inc. 82801JIB (ICH10) LPC Interface
Controller [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller #1 [8086:3a20] (prog-if 8f [PCI native mode controller,
supports both channels switched to ISA compatibility mode, supports bus
mastering])
Subsystem: ASUSTeK Computer Inc. 82801JI (ICH10 Family) 4 port SATA IDE
Controller [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 9c00 [size=8]
Region 1: I/O ports at 9880 [size=4]
Region 2: I/O ports at 9800 [size=8]
Region 3: I/O ports at 9480 [size=4]
Region 4: I/O ports at 9400 [size=16]
Region 5: I/O ports at 9080 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
[8086:3a30]
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe3fb400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller #2 [8086:3a26] (prog-if 85 [PCI native mode-only
controller, supports bus mastering])
Subsystem: ASUSTeK Computer Inc. 82801JI (ICH10 Family) 2 port SATA IDE
Controller [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at ac00 [size=8]
Region 1: I/O ports at a880 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at a480 [size=4]
Region 4: I/O ports at a400 [size=16]
Region 5: I/O ports at a080 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 02)
Subsystem: ASUSTeK Computer Inc. M3A78 Series Motherboard [1043:82c6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at fdeff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fdee0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fe9f0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
02:00.0 IDE interface [0101]: JMicron Technology Corp. JMB368 IDE controller
[197b:2368] (prog-if 85 [PCI native mode-only controller, supports bus
mastering])
Subsystem: ASUSTeK Computer Inc. JMB368 IDE controller [1043:827e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Expansion ROM at feaf0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
Kernel modules: pata_jmicron, ata_generic
04:00.0 Ethernet controller [0200]: 3Com Corporation 3c905B 100BaseTX [Cyclone]
[10b7:9055] (rev 64)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100 [10b7:9055]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at ec00 [size=128]
Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=128]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: 3c59x
Kernel modules: 3c59x
04:01.0 Ethernet controller [0200]: 3Com Corporation 3c905B 100BaseTX [Cyclone]
[10b7:9055] (rev 64)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100 [10b7:9055]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at e880 [size=128]
Region 1: Memory at febff800 (32-bit, non-prefetchable) [size=128]
Expansion ROM at feba0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: 3c59x
Kernel modules: 3c59x
** USB devices:
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 09da:8090 A4Tech Co., Ltd. X-718BK Oscar Optical Gaming
Mouse
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: bullseye/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 5.6.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8),
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.6.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.137
ii kmod 27+20200310-2
ii linux-base 4.6
Versions of packages linux-image-5.6.0-1-amd64 recommends:
ii apparmor 2.13.4-1+b1
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.6.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.04-7
pn linux-doc-5.6 <none>
Versions of packages linux-image-5.6.0-1-amd64 is related to:
ii firmware-amd-graphics 20190717-2
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20190717-2
ii firmware-misc-nonfree 20190717-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
