Le 07/03/2019 à 18:39, Simon McVittie a écrit :
On Thu, 07 Mar 2019 at 13:30:57 +0100, Julien Puydt wrote:
Just changing the ioquake3 binary package (which makes dpkg complain about
ioquake3-server, but it's normal):
1.36+u20181017.09166ba~dfsg-2 works
1.36+u20181222.e5da13f~dfsg-1 fails
What graphics stack are you using, in particular your kernel and Mesa
driver? Running `reportbug --template ioquake3` will summarize the most
relevant packages.
>
It looks as though the problem might be that your driver only provides
GLSL 1.20 (either on your hardware or in general), whereas the hitCube()
function introduced between 09166ba and e5da13f assumes GLSL 1.30
or later.
Here is what seems relevant in reportbug:
Kernel: Linux 4.17.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8),
LANGUAGE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages ioquake3 depends on:
ii ioquake3-server 1.36+u20181222.e5da13f~dfsg-1
ii libc6 2.28-8
ii libcurl3-gnutls 7.64.0-2
ii libgl1 1.1.0-1
ii libjpeg62-turbo 1:1.5.2-2+b1
ii libogg0 1.3.2-1+b1
ii libopenal1 1:1.19.1-1
ii libopus0 1.3-1
ii libopusfile0 0.9+20170913-1
ii libsdl2-2.0-0 2.0.9+dfsg1-1
ii libvorbis0a 1.3.6-2
ii libvorbisfile3 1.3.6-2
ii zlib1g 1:1.2.11.dfsg-1
Versions of packages ioquake3 recommends:
ii x11-utils 7.7+4
ii zenity 3.30.0-2
ioquake3 suggests no packages.
Versions of packages ioquake3 is related to:
ii libgl1-mesa-dri 18.3.4-2
The following should also tell more about the graphics hardware:
# lspci -s 00:02.0 -vvv
00:02.0 VGA compatible controller: Intel Corporation Core Processor
Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
Subsystem: Dell Latitude E6410
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 26
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 70b0 [size=8]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee01004 Data: 4023
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: i915
Kernel modules: i915
Hope that helps,
jpuydt on irc.debian.org
