--- Begin Message ---
Package: pulseaudio
Version: 11.1-5
Severity: critical
Justification: breaks unrelated software
# apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following packages were automatically installed and are no longer required:
apper apper-data cups-pk-helper debconf-kde-data debconf-kde-helper
gir1.2-atspi-2.0 gir1.2-notify-0.7 gir1.2-polkit-1.0 gir1.2-secret-1
gir1.2-wnck-3.0 kaccessible kdeaccessibility kdesudo kmag kmousetool libatk-
adaptor libbrlapi0.6 libdebconf-kde1 liblouis-data liblouis14
libu2f-udev libwnck-3-0 libwnck-3-common libxres1 orca polkit-kde-1
python3-brlapi python3-cups python3-cupshelpers python3-louis
python3-pyatspi python3-smbc python3-speechd python3-xdg system-config-
printer system-config-printer-common system-config-printer-udev
task-desktop x11-apps x11-session-utils xbitmaps xbrlapi xinit xorg xterm
Use 'apt autoremove' to remove them.
The following packages will be REMOVED:
kde-standard plasma-pa pulseaudio-module-gconf task-kde-desktop
The following packages will be upgraded:
libpulse-mainloop-glib0 libpulse0 libpulsedsp pulseaudio pulseaudio-utils
5 upgraded, 0 newly installed, 4 to remove and 0 not upgraded.
Need to get 1559 kB of archives.
After this operation, 1248 kB disk space will be freed.
Do you want to continue? [Y/n]
-- Package-specific info:
File '/etc/default/pulseaudio' does not exist
-- System Information:
Debian Release: buster/sid
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'unstable'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.16.0-2-amd64 (SMP w/1 CPU core)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8), LANGUAGE=
(charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages pulseaudio depends on:
ii adduser 3.117
ii libasound2 1.1.6-1
ii libasound2-plugins 1.1.6-1
ii libc6 2.27-3
ii libcap2 1:2.25-1.2
ii libdbus-1-3 1.12.8-3
ii libgcc1 1:8.1.0-8
ii libice6 2:1.0.9-2
ii libltdl7 2.4.6-2.1
ii liborc-0.4-0 1:0.4.28-2
ii libpulse0 11.1-5
ii libsm6 2:1.2.2-1+b3
ii libsndfile1 1.0.28-4
ii libsoxr0 0.1.2-3
ii libspeexdsp1 1.2~rc1.2-1+b2
ii libstdc++6 8.1.0-8
ii libsystemd0 238-5
ii libtdb1 1.3.15-4
ii libudev1 238-5
ii libwebrtc-audio-processing1 0.3-1
ii libx11-6 2:1.6.5-1
ii libx11-xcb1 2:1.6.5-1
ii libxcb1 1.13-1
ii libxtst6 2:1.2.3-1
ii lsb-base 9.20170808
ii pulseaudio-utils 11.1-5
Versions of packages pulseaudio recommends:
ii dbus-user-session 1.12.8-3
ii libpam-systemd 238-5
ii rtkit 0.11-6
Versions of packages pulseaudio suggests:
pn paman <none>
pn paprefs <none>
pn pavucontrol <none>
pn pavumeter <none>
ii udev 238-5
-- no debconf information
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; auto-connect-localhost = no
; auto-connect-display = no
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; enable-memfd = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-1
; avoid-resampling = false
; enable-remixing = yes
; remixing-use-all-sink-channels = yes
; enable-lfe-remixing = no
; lfe-crossover-freq = 0
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output
source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev
support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100
sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GConf settings. This can be configured with
the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict
with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
### Make some devices default
#set-default-sink output
#set-default-source input
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal
support)
load-module module-detect
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Automatically restore the volume of streams and devices
load-module module-stream-restore
load-module module-device-restore
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
sysdefault:CARD=I82801AAICH
Intel 82801AA-ICH, Intel 82801AA-ICH
Default Audio Device
front:CARD=I82801AAICH,DEV=0
Intel 82801AA-ICH, Intel 82801AA-ICH
Front speakers
surround21:CARD=I82801AAICH,DEV=0
Intel 82801AA-ICH, Intel 82801AA-ICH
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=I82801AAICH,DEV=0
Intel 82801AA-ICH, Intel 82801AA-ICH
4.0 Surround output to Front and Rear speakers
surround41:CARD=I82801AAICH,DEV=0
Intel 82801AA-ICH, Intel 82801AA-ICH
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=I82801AAICH,DEV=0
Intel 82801AA-ICH, Intel 82801AA-ICH
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=I82801AAICH,DEV=0
Intel 82801AA-ICH, Intel 82801AA-ICH
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
iec958:CARD=I82801AAICH,DEV=0
Intel 82801AA-ICH, Intel 82801AA-ICH
IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=I82801AAICH,DEV=0
Intel 82801AA-ICH, Intel 82801AA-ICH
Direct sample mixing device
dsnoop:CARD=I82801AAICH,DEV=0
Intel 82801AA-ICH, Intel 82801AA-ICH
Direct sample snooping device
hw:CARD=I82801AAICH,DEV=0
Intel 82801AA-ICH, Intel 82801AA-ICH
Direct hardware device without any conversions
plughw:CARD=I82801AAICH,DEV=0
Intel 82801AA-ICH, Intel 82801AA-ICH
Hardware device with all software conversions
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute
state of devices"
module.version = "11.1"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the
volume/mute/device state of streams"
module.version = "11.1"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "11.1"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with
additional static information"
module.version = "11.1"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
Module #5
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load
matching drivers"
module.version = "11.1"
Module #6
Name: module-alsa-card
Argument: device_id="0" name="pci-0000_00_05.0"
card_name="alsa_card.pci-0000_00_05.0" namereg_fail=false tsched=yes
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "11.1"
Module #7
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "11.1"
Module #8
Name: module-gconf
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "GConf Adapter"
module.version = "11.1"
Module #9
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink
and source"
module.version = "11.1"
Module #10
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to
move its streams to the default sink/source"
module.version = "11.1"
Module #11
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Mantiene sempre almeno un sink caricato
anche se è nullo"
module.version = "11.1"
Module #12
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based
on intended roles of devices"
module.version = "11.1"
Module #13
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long,
suspend it"
module.version = "11.1"
Module #14
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit
session of this user"
module.version = "11.1"
Module #15
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of
this user"
module.version = "11.1"
Module #16
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R
depending on the position on screen of the widget triggering them."
module.version = "11.1"
Module #17
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles
while others exist"
module.version = "11.1"
Module #18
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "11.1"
Module #19
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when
needed"
module.version = "11.1"
Module #20
Name: module-x11-publish
Argument: display=:0
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "11.1"
Module #21
Name: module-x11-cork-request
Argument: display=:0
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Synthesize X11 media key events when
cork/uncork is requested"
module.version = "11.1"
Module #22
Name: module-device-manager
Argument: do_routing=1
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Keep track of devices (and their
descriptions) both past and present and prioritise by role"
module.version = "11.1"
Module #23
Name: module-x11-xsmp
Argument: display=:0
session_manager=local/Sid:@/tmp/.ICE-unix/903,unix/Sid:/tmp/.ICE-unix/903
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "X11 session management"
module.version = "11.1"
Sink #0
State: SUSPENDED
Name: alsa_output.pci-0000_00_05.0.analog-stereo
Description: Audio interno Stereo analogico
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 31008 / 47% / -19.50 dB, front-right: 31008 /
47% / -19.50 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_05.0.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "Intel 82801AA-ICH"
alsa.id = "Intel ICH"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "Intel 82801AA-ICH"
alsa.long_card_name = "Intel 82801AA-ICH with AD1980 at irq 21"
alsa.driver_name = "snd_intel8x0"
device.bus_path = "pci-0000:00:05.0"
sysfs.path = "/devices/pci0000:00/0000:00:05.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "2415"
device.product.name = "82801AA AC'97 Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "19188"
device.buffering.fragment_size = "6396"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Stereo analogico"
device.description = "Audio interno Stereo analogico"
alsa.mixer_name = "Analog Devices AD1980"
alsa.components = "AC97a:41445370"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-output;output-amplifier-on: Uscita analogica /
Amplificatore (priority: 9910)
analog-output;output-amplifier-off: Uscita analogica / Nessun
amplificatore (priority: 9900)
Active Port: analog-output;output-amplifier-on
Formats:
pcm
Source #0
State: SUSPENDED
Name: alsa_output.pci-0000_00_05.0.analog-stereo.monitor
Description: Monitor of Audio interno Stereo analogico
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_05.0.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Audio interno Stereo analogico"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "Intel 82801AA-ICH"
alsa.long_card_name = "Intel 82801AA-ICH with AD1980 at irq 21"
alsa.driver_name = "snd_intel8x0"
device.bus_path = "pci-0000:00:05.0"
sysfs.path = "/devices/pci0000:00/0000:00:05.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "2415"
device.product.name = "82801AA AC'97 Audio Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #1
State: SUSPENDED
Name: alsa_input.pci-0000_00_05.0.analog-stereo
Description: Audio interno Stereo analogico
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 43800 / 67% / -10.50 dB, front-right: 43800 /
67% / -10.50 dB
balance 0.00
Base Volume: 27636 / 42% / -22.50 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "Intel 82801AA-ICH"
alsa.id = "Intel ICH"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "Intel 82801AA-ICH"
alsa.long_card_name = "Intel 82801AA-ICH with AD1980 at irq 21"
alsa.driver_name = "snd_intel8x0"
device.bus_path = "pci-0000:00:05.0"
sysfs.path = "/devices/pci0000:00/0000:00:05.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "2415"
device.product.name = "82801AA AC'97 Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "17632"
device.buffering.fragment_size = "4408"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Stereo analogico"
device.description = "Audio interno Stereo analogico"
alsa.mixer_name = "Analog Devices AD1980"
alsa.components = "AC97a:41445370"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-input-mic;input-microphone-1: Microfono / Microfono 1
(priority: 8720)
analog-input-mic;input-microphone-2: Microfono / Microfono 2
(priority: 8719)
analog-input-linein: Line-In (priority: 8100)
analog-input-aux: Ingresso analogico (priority: 8000)
analog-input-video: Video (priority: 7000)
Active Port: analog-input-mic;input-microphone-1
Formats:
pcm
Client #0
Driver: module-systemd-login.c
Owner Module: 15
Properties:
application.name = "Login Session 3"
systemd-login.session = "3"
Client #5
Driver: module-x11-xsmp.c
Owner Module: 23
Properties:
application.name = "XSMP Session on KDE as
105369640000152956053200000009030009"
xsmp.vendor = "KDE"
xsmp.client.id = "105369640000152956053200000009030009"
Client #6
Driver: protocol-native.c
Owner Module: 7
Properties:
application.name = "QPulse"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.process.id = "924"
application.process.user = "ilprof"
application.process.host = "Sid"
application.process.binary = "plasmashell"
application.language = "it_IT.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"82633ee1244e459abe4082af6e200285"
application.process.session_id = "3"
Client #18
Driver: protocol-native.c
Owner Module: 7
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.process.id = "5913"
application.process.user = "ilprof"
application.process.host = "Sid"
application.process.binary = "pactl"
application.language = "C"
window.x11.display = ":0"
application.process.machine_id =
"82633ee1244e459abe4082af6e200285"
application.process.session_id = "3"
Card #0
Name: alsa_card.pci-0000_00_05.0
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "0"
alsa.card_name = "Intel 82801AA-ICH"
alsa.long_card_name = "Intel 82801AA-ICH with AD1980 at irq 21"
alsa.driver_name = "snd_intel8x0"
device.bus_path = "pci-0000:00:05.0"
sysfs.path = "/devices/pci0000:00/0000:00:05.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "2415"
device.product.name = "82801AA AC'97 Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Audio interno"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-stereo: Ingresso «Stereo analogico» (sinks: 0,
sources: 1, priority: 60, available: yes)
output:analog-stereo: Uscita «Stereo analogico» (sinks: 1,
sources: 0, priority: 6000, available: yes)
output:analog-stereo+input:analog-stereo: Duplex stereo
analogico (sinks: 1, sources: 1, priority: 6060, available: yes)
output:analog-surround-21: Uscita «Surround analogico 2.1»
(sinks: 1, sources: 0, priority: 800, available: yes)
output:analog-surround-21+input:analog-stereo: Uscita «Surround
analogico 2.1» + Ingresso «Stereo analogico» (sinks: 1, sources: 1, priority:
860, available: yes)
output:analog-surround-40: Uscita «Surround analogico 4.0»
(sinks: 1, sources: 0, priority: 700, available: yes)
output:analog-surround-40+input:analog-stereo: Uscita «Surround
analogico 4.0» + Ingresso «Stereo analogico» (sinks: 1, sources: 1, priority:
760, available: yes)
output:analog-surround-41: Uscita «Surround analogico 4.1»
(sinks: 1, sources: 0, priority: 800, available: yes)
output:analog-surround-41+input:analog-stereo: Uscita «Surround
analogico 4.1» + Ingresso «Stereo analogico» (sinks: 1, sources: 1, priority:
860, available: yes)
output:analog-surround-50: Uscita «Surround analogico 5.0»
(sinks: 1, sources: 0, priority: 700, available: yes)
output:analog-surround-50+input:analog-stereo: Uscita «Surround
analogico 5.0» + Ingresso «Stereo analogico» (sinks: 1, sources: 1, priority:
760, available: yes)
output:analog-surround-51: Uscita «Surround analogico 5.1»
(sinks: 1, sources: 0, priority: 800, available: yes)
output:analog-surround-51+input:analog-stereo: Uscita «Surround
analogico 5.1» + Ingresso «Stereo analogico» (sinks: 1, sources: 1, priority:
860, available: yes)
off: Spento (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-mic;input-microphone-1: Microfono / Microfono 1
(priority: 8720, latency offset: 0 usec)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-21+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-stereo
analog-input-mic;input-microphone-2: Microfono / Microfono 2
(priority: 8719, latency offset: 0 usec)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-21+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-stereo
analog-input-linein: Line-In (priority: 8100, latency offset: 0
usec)
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-21+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-stereo
analog-input-aux: Ingresso analogico (priority: 8000, latency
offset: 0 usec)
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-21+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-stereo
analog-input-video: Video (priority: 7000, latency offset: 0
usec)
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-21+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-stereo
analog-output;output-amplifier-on: Uscita analogica /
Amplificatore (priority: 9910, latency offset: 0 usec)
Part of profile(s): output:analog-stereo,
output:analog-stereo+input:analog-stereo, output:analog-surround-21,
output:analog-surround-21+input:analog-stereo, output:analog-surround-40,
output:analog-surround-40+input:analog-stereo, output:analog-surround-41,
output:analog-surround-41+input:analog-stereo, output:analog-surround-50,
output:analog-surround-50+input:analog-stereo, output:analog-surround-51,
output:analog-surround-51+input:analog-stereo
analog-output;output-amplifier-off: Uscita analogica / Nessun
amplificatore (priority: 9900, latency offset: 0 usec)
Part of profile(s): output:analog-stereo,
output:analog-stereo+input:analog-stereo, output:analog-surround-21,
output:analog-surround-21+input:analog-stereo, output:analog-surround-40,
output:analog-surround-40+input:analog-stereo, output:analog-surround-41,
output:analog-surround-41+input:analog-stereo, output:analog-surround-50,
output:analog-surround-50+input:analog-stereo, output:analog-surround-51,
output:analog-surround-51+input:analog-stereo
Server String: unix:/run/user/1000/pulse/native
Library Protocol Version: 32
Server Protocol Version: 32
Is Local: yes
Client Index: 19
Tile Size: 65472
User Name: ilprof
Host Name: Sid
Server Name: pulseaudio
Server Version: 11.1
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.pci-0000_00_05.0.analog-stereo
Default Source: alsa_input.pci-0000_00_05.0.analog-stereo
Cookie: 8d74:a058
--- End Message ---
