Your message dated Wed, 2 Dec 2015 16:22:22 -0800
with message-id <565f8b3e.2030...@reanimality.com>
and subject line Re: Bug#806570: gimp: broken with gegl 0.3.4 update
has caused the Debian Bug report #806570,
regarding gimp does not start at all
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)


-- 
806570: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=806570
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: gimp
Version: 2.8.14-1.2
Severity: serious

Dear Gimp maintainers,

since very recent, gimp refuses to start:
        $ gimp
on the command line in X shows not reaction whatsoever. Nothing. Also
top does not show any activity.

Any idea?

Norbert



-- System Information:
Debian Release: stretch/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (200, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.4.0-rc3 (SMP w/4 CPU cores; PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages gimp depends on:
ii  gimp-data            2.8.14-1.2
ii  libaa1               1.4p5-44
ii  libatk1.0-0          2.18.0-1
ii  libbabl-0.1-0        0.1.14-1
ii  libbz2-1.0           1.0.6-8
ii  libc6                2.21-1
ii  libcairo2            1.14.4-1
ii  libdbus-1-3          1.10.6-1
ii  libdbus-glib-1-2     0.102-1
ii  libexif12            0.6.21-2
ii  libexpat1            2.1.0-7
ii  libfontconfig1       2.11.0-6.3
ii  libfreetype6         2.6.1-0.1
ii  libgdk-pixbuf2.0-0   2.32.2-1
ii  libgegl-0.3-0        0.3.4-1
ii  libgimp2.0           2.8.14-1.2
ii  libglib2.0-0         2.46.2-1
ii  libgs9               9.16~dfsg-2
ii  libgtk2.0-0          2.24.28-1
ii  libgudev-1.0-0       230-2
ii  libice6              2:1.0.9-1+b1
ii  libjasper1           1.900.1-debian1-2.4
ii  libjpeg62-turbo      1:1.4.1-2
ii  libjson-glib-1.0-0   1.0.4-2
ii  liblcms2-2           2.6-3+b3
ii  libmng1              1.0.10+dfsg-3.1+b3
ii  libpango-1.0-0       1.38.1-1
ii  libpangocairo-1.0-0  1.38.1-1
ii  libpangoft2-1.0-0    1.38.1-1
ii  libpng12-0           1.2.54-1
ii  libpoppler-glib8     0.26.5-4
ii  librsvg2-2           2.40.11-2
ii  libsm6               2:1.2.2-1+b1
ii  libtiff5             4.0.5-1
ii  libwmf0.2-7          0.2.8.4-10.4
ii  libx11-6             2:1.6.3-1
ii  libxcursor1          1:1.1.14-1+b1
ii  libxext6             2:1.3.3-1
ii  libxfixes3           1:5.0.1-2+b2
ii  libxmu6              2:1.1.2-2
ii  libxpm4              1:3.5.11-1+b1
ii  libxt6               1:1.1.5-1
ii  python-gtk2          2.24.0-4
ii  python2.7            2.7.10-5+b1
pn  python:any           <none>
ii  zlib1g               1:1.2.8.dfsg-2+b1

Versions of packages gimp recommends:
ii  ghostscript  9.16~dfsg-2

Versions of packages gimp suggests:
ii  gimp-data-extras          1:2.0.1-3
ii  gimp-help-de [gimp-help]  2.8.2-0.1
ii  gimp-help-en [gimp-help]  2.8.2-0.1
ii  gvfs-backends             1.26.2-1
ii  libasound2                1.0.29-1

-- no debconf information

--- End Message ---
--- Begin Message ---
Ran Memtest86+ and results were error free.

I attached dmesg > boot.messages to let you see if anything looks spurious.

- Marc


On 12/01/2015 06:22 PM, Ari Pollak wrote:
Seems like it could be RAM, disk, or libc problems? I'd suggest checking dmesg and/or doing some hardware tests, but it seems pretty unlikely this is a GEGL problem.

--

Marc J. Driftmeyer

main: m...@reanimality.com <mailto:%27...@reanimality.com%27>
book: m...@holoworlds.net <mailto:%27...@reanimality.com%27>
main:www.reanimastudios.com <http://www.reanimastudios.com>
book:www.holoworlds.net <http://www.holoworlds.net>

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.0-1-amd64 (debian-ker...@lists.debian.org) 
(gcc version 4.9.3 (Debian 4.9.3-5) ) #1 SMP Debian 4.2.6-1 (2015-11-10)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-1-amd64 
root=UUID=75f65642-f80b-424c-a521-2c00f88f1cbd ro quiet splash iommu=soft
[    0.000000] tseg: 00bf800000
[    0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point 
registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 
bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be479fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be47a000-0x00000000bea37fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bea38000-0x00000000bee34fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bee35000-0x00000000bf154fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf155000-0x00000000bf155fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf156000-0x00000000bf35bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf35c000-0x00000000bf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000083effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by 
O.E.M./990FXA-UD3, BIOS FC 02/05/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x83f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-CCFFF write-protect
[    0.000000]   CD000-EBFFF uncachable
[    0.000000]   EC000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000BF800000 mask FFFFFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000083f000000 aka 33776M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd870-0x000fd87f] mapped at 
[ffff8800000fd870]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01d2d000, 0x01d2dfff] PGTABLE
[    0.000000] BRK [0x01d2e000, 0x01d2efff] PGTABLE
[    0.000000] BRK [0x01d2f000, 0x01d2ffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x83ee00000-0x83effffff]
[    0.000000]  [mem 0x83ee00000-0x83effffff] page 2M
[    0.000000] BRK [0x01d30000, 0x01d30fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x820000000-0x83edfffff]
[    0.000000]  [mem 0x820000000-0x83edfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x800000000-0x81fffffff]
[    0.000000]  [mem 0x800000000-0x81fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbe479fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xbe3fffff] page 2M
[    0.000000]  [mem 0xbe400000-0xbe479fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbf155000-0xbf155fff]
[    0.000000]  [mem 0xbf155000-0xbf155fff] page 4k
[    0.000000] BRK [0x01d31000, 0x01d31fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbf35c000-0xbf7fffff]
[    0.000000]  [mem 0xbf35c000-0xbf3fffff] page 4k
[    0.000000]  [mem 0xbf400000-0xbf7fffff] page 2M
[    0.000000] BRK [0x01d32000, 0x01d32fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100001000-0x7ffffffff]
[    0.000000]  [mem 0x100001000-0x1001fffff] page 4k
[    0.000000]  [mem 0x100200000-0x13fffffff] page 2M
[    0.000000]  [mem 0x140000000-0x7ffffffff] page 1G
[    0.000000] RAMDISK: [mem 0x35b72000-0x36db0fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000BEE1F070 000064 (v01 ALASKA A M I    
01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000BEE25818 0000F4 (v04 ALASKA A M I    
01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has 
zero address or length: 0x0000000000000000/0x1 (20150619/tbfadt-654)
[    0.000000] ACPI: DSDT 0x00000000BEE1F170 0066A3 (v02 ALASKA A M I    
00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000BEE2FF80 000040
[    0.000000] ACPI: APIC 0x00000000BEE25910 00009E (v03 ALASKA A M I    
01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000BEE259B0 000044 (v01 ALASKA A M I    
01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000BEE259F8 00003C (v01 ALASKA A M I    
01072009 MSFT 00010013)
[    0.000000] ACPI: SSDT 0x00000000BEE25A38 000D3C (v01 AMD    POWERNOW 
00000001 AMD  00000001)
[    0.000000] ACPI: MATS 0x00000000BEE26778 000034 (v02 ALASKA A M I    
00000002 w?x2 00000000)
[    0.000000] ACPI: IVRS 0x00000000BEE267B0 0000D0 (v01 AMD    RD890S   
00202031 AMD  00000000)
[    0.000000] ACPI: BGRT 0x00000000BEE26880 000038 (v00 ALASKA A M I    
01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000083effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x83eff8000-0x83effbfff]
[    0.000000]  [ffffea0000000000-ffffea0020ffffff] PMD -> 
[ffff88081e600000-ffff88083e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000083effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000be479fff]
[    0.000000]   node   0: [mem 0x00000000bf155000-0x00000000bf155fff]
[    0.000000]   node   0: [mem 0x00000000bf35c000-0x00000000bf7fffff]
[    0.000000]   node   0: [mem 0x0000000100001000-0x000000083effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000083effffff]
[    0.000000] On node 0 totalpages: 8378555
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12133 pages used for memmap
[    0.000000]   DMA32 zone: 776479 pages, LIFO batch:31
[    0.000000]   Normal zone: 118720 pages used for memmap
[    0.000000]   Normal zone: 7598079 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe47a000-0xbea37fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbea38000-0xbee34fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbee35000-0xbf154fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf156000-0xbf35bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[    0.000000] e820: [mem 0xbf800000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 
0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 
nr_node_ids:1
[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff88083ec00000 s92696 r8192 
d30184 u262144
[    0.000000] pcpu-alloc: s92696 r8192 d30184 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total 
pages: 8247617
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-1-amd64 
root=UUID=75f65642-f80b-424c-a521-2c00f88f1cbd ro quiet splash iommu=soft
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Memory: 32890280K/33514220K available (5474K kernel code, 1094K 
rwdata, 2748K rodata, 1292K init, 832K bss, 623940K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:1032 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 4018.463 MHz processor
[    0.000020] Calibrating delay loop (skipped), value calculated using timer 
frequency.. 8036.92 BogoMIPS (lpj=16073852)
[    0.000022] pid_max: default: 32768 minimum: 301
[    0.000029] ACPI: Core revision 20150619
[    0.002711] ACPI: All ACPI Tables successfully acquired
[    0.002735] Security Framework initialized
[    0.002737] AppArmor: AppArmor disabled by boot time parameter
[    0.002738] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.004674] Dentry cache hash table entries: 4194304 (order: 13, 33554432 
bytes)
[    0.011856] Inode-cache hash table entries: 2097152 (order: 12, 16777216 
bytes)
[    0.015281] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.015314] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 
bytes)
[    0.015673] Initializing cgroup subsys blkio
[    0.015675] Initializing cgroup subsys memory
[    0.015682] Initializing cgroup subsys devices
[    0.015684] Initializing cgroup subsys freezer
[    0.015686] Initializing cgroup subsys net_cls
[    0.015689] Initializing cgroup subsys perf_event
[    0.015691] Initializing cgroup subsys net_prio
[    0.015713] CPU: Physical Processor ID: 0
[    0.015714] CPU: Processor Core ID: 0
[    0.015715] mce: CPU supports 7 MCE banks
[    0.015721] LVT offset 1 assigned for vector 0xf9
[    0.015725] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.015726] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.015928] Freeing SMP alternatives memory: 20K (ffffffff81c56000 - 
ffffffff81c5b000)
[    0.017185] ftrace: allocating 23146 entries in 91 pages
[    0.023243] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.168233] smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (fam: 15, 
model: 02, stepping: 00)
[    0.168251] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.168255] ... version:                0
[    0.168255] ... bit width:              48
[    0.168256] ... generic registers:      6
[    0.168257] ... value mask:             0000ffffffffffff
[    0.168258] ... max period:             00007fffffffffff
[    0.168258] ... fixed-purpose events:   0
[    0.168259] ... event mask:             000000000000003f
[    0.168652] NMI watchdog: enabled on all CPUs, permanently consumes one 
hw-PMU counter.
[    0.168716] x86: Booting SMP configuration:
[    0.168717] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.191299] x86: Booted up 1 node, 8 CPUs
[    0.191302] smpboot: Total of 8 processors activated (64295.40 BogoMIPS)
[    0.200481] devtmpfs: initialized
[    0.205959] PM: Registering ACPI NVS region [mem 0xbea38000-0xbee34fff] 
(4182016 bytes)
[    0.206017] PM: Registering ACPI NVS region [mem 0xbf156000-0xbf35bfff] 
(2121728 bytes)
[    0.206122] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, 
max_idle_ns: 7645041785100000 ns
[    0.206212] pinctrl core: initialized pinctrl subsystem
[    0.206320] NET: Registered protocol family 16
[    0.216278] cpuidle: using governor ladder
[    0.227496] cpuidle: using governor menu
[    0.227587] ACPI: bus type PCI registered
[    0.227589] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.227663] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 
0xe0000000-0xefffffff] (base 0xe0000000)
[    0.227665] PCI: not using MMCONFIG
[    0.227666] PCI: Using configuration type 1 for base access
[    0.227667] PCI: Using configuration type 1 for extended access
[    0.228359] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.228360] mtrr: probably your BIOS does not setup all CPUs.
[    0.228361] mtrr: corrected configuration.
[    0.238267] ACPI: Added _OSI(Module Device)
[    0.238269] ACPI: Added _OSI(Processor Device)
[    0.238270] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.238271] ACPI: Added _OSI(Processor Aggregator Device)
[    0.239543] ACPI: Executed 3 blocks of module-level executable AML code
[    0.241471] ACPI: Interpreter enabled
[    0.241476] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State 
[\_S1_] (20150619/hwxface-580)
[    0.241479] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State 
[\_S2_] (20150619/hwxface-580)
[    0.241489] ACPI: (supports S0 S3 S4 S5)
[    0.241490] ACPI: Using IOAPIC for interrupt routing
[    0.241585] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 
0xe0000000-0xefffffff] (base 0xe0000000)
[    0.241613] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI 
motherboard resources
[    0.241628] PCI: Using host bridge windows from ACPI; if necessary, use 
"pci=nocrs" and report a bug
[    0.246041] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.246045] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM 
Segments MSI]
[    0.246049] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.246278] PCI host bridge to bus 0000:00
[    0.246280] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.246282] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.246283] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.246285] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.246286] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.246287] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff 
window]
[    0.246289] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff 
window]
[    0.246290] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff 
window]
[    0.246297] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[    0.246386] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[    0.246469] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[    0.246495] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.246529] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.246567] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[    0.246592] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    0.246625] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.246658] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
[    0.246684] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.246718] pci 0000:00:0a.0: System wakeup disabled by ACPI
[    0.246759] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.246777] pci 0000:00:11.0: reg 0x10: [io  0xf090-0xf097]
[    0.246784] pci 0000:00:11.0: reg 0x14: [io  0xf080-0xf083]
[    0.246791] pci 0000:00:11.0: reg 0x18: [io  0xf070-0xf077]
[    0.246797] pci 0000:00:11.0: reg 0x1c: [io  0xf060-0xf063]
[    0.246804] pci 0000:00:11.0: reg 0x20: [io  0xf050-0xf05f]
[    0.246811] pci 0000:00:11.0: reg 0x24: [mem 0xf750b000-0xf750b3ff]
[    0.246886] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.246897] pci 0000:00:12.0: reg 0x10: [mem 0xf750a000-0xf750afff]
[    0.246965] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.247001] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.247020] pci 0000:00:12.2: reg 0x10: [mem 0xf7509000-0xf75090ff]
[    0.247067] pci 0000:00:12.2: supports D1 D2
[    0.247068] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.247100] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.247138] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.247149] pci 0000:00:13.0: reg 0x10: [mem 0xf7508000-0xf7508fff]
[    0.247217] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.247255] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.247273] pci 0000:00:13.2: reg 0x10: [mem 0xf7507000-0xf75070ff]
[    0.247320] pci 0000:00:13.2: supports D1 D2
[    0.247321] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.247354] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.247390] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.247490] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.247503] pci 0000:00:14.1: reg 0x10: [io  0xf040-0xf047]
[    0.247510] pci 0000:00:14.1: reg 0x14: [io  0xf030-0xf033]
[    0.247516] pci 0000:00:14.1: reg 0x18: [io  0xf020-0xf027]
[    0.247523] pci 0000:00:14.1: reg 0x1c: [io  0xf010-0xf013]
[    0.247530] pci 0000:00:14.1: reg 0x20: [io  0xf000-0xf00f]
[    0.247544] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.247545] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.247546] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.247548] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.247608] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.247627] pci 0000:00:14.2: reg 0x10: [mem 0xf7500000-0xf7503fff 64bit]
[    0.247667] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.247699] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.247733] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.247837] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.247891] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.247923] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.247935] pci 0000:00:14.5: reg 0x10: [mem 0xf7506000-0xf7506fff]
[    0.248002] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.248040] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[    0.248084] pci 0000:00:15.0: supports D1 D2
[    0.248118] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.248154] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[    0.248198] pci 0000:00:15.1: supports D1 D2
[    0.248232] pci 0000:00:15.1: System wakeup disabled by ACPI
[    0.248270] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.248284] pci 0000:00:16.0: reg 0x10: [mem 0xf7505000-0xf7505fff]
[    0.248351] pci 0000:00:16.0: System wakeup disabled by ACPI
[    0.248387] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.248405] pci 0000:00:16.2: reg 0x10: [mem 0xf7504000-0xf75040ff]
[    0.248452] pci 0000:00:16.2: supports D1 D2
[    0.248453] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.248486] pci 0000:00:16.2: System wakeup disabled by ACPI
[    0.248521] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    0.248581] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    0.248639] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    0.248697] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    0.248756] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    0.248813] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    0.248910] pci 0000:01:00.0: [10de:0400] type 00 class 0x030000
[    0.248927] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.248935] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit 
pref]
[    0.248944] pci 0000:01:00.0: reg 0x1c: [mem 0xf4000000-0xf5ffffff 64bit]
[    0.248950] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.248956] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf701ffff pref]
[    0.259517] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.259521] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.259523] pci 0000:00:02.0:   bridge window [mem 0xf4000000-0xf70fffff]
[    0.259526] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 
64bit pref]
[    0.259565] pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
[    0.259590] pci 0000:02:00.0: reg 0x10: [mem 0xf7400000-0xf7407fff 64bit]
[    0.259643] pci 0000:02:00.0: supports D1 D2
[    0.259645] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.267523] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.267527] pci 0000:00:09.0:   bridge window [mem 0xf7400000-0xf74fffff]
[    0.267565] pci 0000:03:00.0: [1b4b:9172] type 00 class 0x010601
[    0.267582] pci 0000:03:00.0: reg 0x10: [io  0xd040-0xd047]
[    0.267587] pci 0000:03:00.0: reg 0x14: [io  0xd030-0xd033]
[    0.267593] pci 0000:03:00.0: reg 0x18: [io  0xd020-0xd027]
[    0.267599] pci 0000:03:00.0: reg 0x1c: [io  0xd010-0xd013]
[    0.267605] pci 0000:03:00.0: reg 0x20: [io  0xd000-0xd00f]
[    0.267610] pci 0000:03:00.0: reg 0x24: [mem 0xf7310000-0xf73101ff]
[    0.267616] pci 0000:03:00.0: reg 0x30: [mem 0xf7300000-0xf730ffff pref]
[    0.267634] pci 0000:03:00.0: PME# supported from D3hot
[    0.275526] pci 0000:00:0a.0: PCI bridge to [bus 03]
[    0.275530] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.275532] pci 0000:00:0a.0:   bridge window [mem 0xf7300000-0xf73fffff]
[    0.275584] pci 0000:04:0e.0: [1106:3044] type 00 class 0x0c0010
[    0.275608] pci 0000:04:0e.0: reg 0x10: [mem 0xf7200000-0xf72007ff]
[    0.275618] pci 0000:04:0e.0: reg 0x14: [io  0xc000-0xc07f]
[    0.275682] pci 0000:04:0e.0: supports D2
[    0.275683] pci 0000:04:0e.0: PME# supported from D2 D3hot D3cold
[    0.275740] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[    0.275743] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.275746] pci 0000:00:14.4:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.275750] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] 
(subtractive decode)
[    0.275751] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] 
(subtractive decode)
[    0.275752] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] 
(subtractive decode)
[    0.275754] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] 
(subtractive decode)
[    0.275755] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff 
window] (subtractive decode)
[    0.275756] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff 
window] (subtractive decode)
[    0.275758] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff 
window] (subtractive decode)
[    0.275813] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[    0.275848] pci 0000:05:00.0: reg 0x10: [io  0xb000-0xb0ff]
[    0.275872] pci 0000:05:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit 
pref]
[    0.275887] pci 0000:05:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit 
pref]
[    0.275937] pci 0000:05:00.0: supports D1 D2
[    0.275938] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.275965] pci 0000:05:00.0: System wakeup disabled by ACPI
[    0.283537] pci 0000:00:15.0: PCI bridge to [bus 05]
[    0.283541] pci 0000:00:15.0:   bridge window [io  0xb000-0xbfff]
[    0.283547] pci 0000:00:15.0:   bridge window [mem 0xd0000000-0xd00fffff 
64bit pref]
[    0.283599] pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330
[    0.283633] pci 0000:06:00.0: reg 0x10: [mem 0xf7100000-0xf7107fff 64bit]
[    0.283706] pci 0000:06:00.0: supports D1 D2
[    0.283707] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.291542] pci 0000:00:15.1: PCI bridge to [bus 06]
[    0.291548] pci 0000:00:15.1:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.291579] pci_bus 0000:00: on NUMA node 0
[    0.291915] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[    0.291962] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[    0.292009] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[    0.292056] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[    0.292093] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
[    0.292123] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
[    0.292152] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
[    0.292181] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
[    0.292346] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.292347] vgaarb: device added: 
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.292349] vgaarb: loaded
[    0.292350] vgaarb: bridge control possible 0000:01:00.0
[    0.292459] PCI: Using ACPI for IRQ routing
[    0.298405] PCI: pci_cache_line_size set to 64 bytes
[    0.298457] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.298459] e820: reserve RAM buffer [mem 0xbe47a000-0xbfffffff]
[    0.298460] e820: reserve RAM buffer [mem 0xbf156000-0xbfffffff]
[    0.298461] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[    0.298462] e820: reserve RAM buffer [mem 0x83f000000-0x83fffffff]
[    0.298621] clocksource: Switched to clocksource refined-jiffies
[    0.303980] pnp: PnP ACPI init
[    0.304062] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.304065] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.304264] system 00:01: [io  0x040b] has been reserved
[    0.304266] system 00:01: [io  0x04d6] has been reserved
[    0.304268] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.304269] system 00:01: [io  0x0c14] has been reserved
[    0.304271] system 00:01: [io  0x0c50-0x0c51] has been reserved
[    0.304272] system 00:01: [io  0x0c52] has been reserved
[    0.304273] system 00:01: [io  0x0c6c] has been reserved
[    0.304275] system 00:01: [io  0x0c6f] has been reserved
[    0.304276] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.304278] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.304279] system 00:01: [io  0x0cd4-0x0cd5] has been reserved
[    0.304280] system 00:01: [io  0x0cd6-0x0cd7] has been reserved
[    0.304282] system 00:01: [io  0x0cd8-0x0cdf] has been reserved
[    0.304283] system 00:01: [io  0x0800-0x089f] could not be reserved
[    0.304285] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    0.304286] system 00:01: [io  0x0900-0x090f] has been reserved
[    0.304287] system 00:01: [io  0x0910-0x091f] has been reserved
[    0.304289] system 00:01: [io  0xfe00-0xfefe] has been reserved
[    0.304291] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.304293] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.304295] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.304297] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.304298] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.304300] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[    0.304302] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[    0.304304] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.304417] system 00:02: [io  0x0220-0x0227] has been reserved
[    0.304419] system 00:02: [io  0x0228-0x0237] has been reserved
[    0.304421] system 00:02: [io  0x0a20-0x0a2f] has been reserved
[    0.304423] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.304550] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.304596] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.304598] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.304632] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.304733] system 00:06: [mem 0xfeb20000-0xfeb23fff] has been reserved
[    0.304735] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.304819] system 00:07: [mem 0xfec20000-0xfec200ff] could not be reserved
[    0.304821] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.304894] pnp: PnP ACPI: found 8 devices
[    0.310992] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, 
max_idle_ns: 2085701024 ns
[    0.311027] clocksource: Switched to clocksource acpi_pm
[    0.311055] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.311058] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.311060] pci 0000:00:02.0:   bridge window [mem 0xf4000000-0xf70fffff]
[    0.311062] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 
64bit pref]
[    0.311065] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.311067] pci 0000:00:09.0:   bridge window [mem 0xf7400000-0xf74fffff]
[    0.311070] pci 0000:00:0a.0: PCI bridge to [bus 03]
[    0.311072] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.311074] pci 0000:00:0a.0:   bridge window [mem 0xf7300000-0xf73fffff]
[    0.311077] pci 0000:00:14.4: PCI bridge to [bus 04]
[    0.311079] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.311083] pci 0000:00:14.4:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.311088] pci 0000:00:15.0: PCI bridge to [bus 05]
[    0.311090] pci 0000:00:15.0:   bridge window [io  0xb000-0xbfff]
[    0.311094] pci 0000:00:15.0:   bridge window [mem 0xd0000000-0xd00fffff 
64bit pref]
[    0.311098] pci 0000:00:15.1: PCI bridge to [bus 06]
[    0.311101] pci 0000:00:15.1:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.311106] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.311108] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.311109] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.311110] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.311112] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.311113] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.311114] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[    0.311116] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.311117] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf70fffff]
[    0.311118] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit 
pref]
[    0.311120] pci_bus 0000:02: resource 1 [mem 0xf7400000-0xf74fffff]
[    0.311121] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.311122] pci_bus 0000:03: resource 1 [mem 0xf7300000-0xf73fffff]
[    0.311124] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
[    0.311125] pci_bus 0000:04: resource 1 [mem 0xf7200000-0xf72fffff]
[    0.311126] pci_bus 0000:04: resource 4 [io  0x0000-0x03af window]
[    0.311128] pci_bus 0000:04: resource 5 [io  0x03e0-0x0cf7 window]
[    0.311129] pci_bus 0000:04: resource 6 [io  0x03b0-0x03df window]
[    0.311130] pci_bus 0000:04: resource 7 [io  0x0d00-0xffff window]
[    0.311131] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.311133] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.311134] pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff window]
[    0.311135] pci_bus 0000:05: resource 0 [io  0xb000-0xbfff]
[    0.311137] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit 
pref]
[    0.311138] pci_bus 0000:06: resource 1 [mem 0xf7100000-0xf71fffff]
[    0.311221] NET: Registered protocol family 2
[    0.311481] TCP established hash table entries: 262144 (order: 9, 2097152 
bytes)
[    0.311944] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.312123] TCP: Hash tables configured (established 262144 bind 65536)
[    0.312182] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[    0.312315] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[    0.312494] NET: Registered protocol family 1
[    0.651429] pci 0000:01:00.0: Video device with shadowed ROM
[    0.651595] PCI: CLS 64 bytes, default 64
[    0.651634] Unpacking initramfs...
[    0.901169] Freeing initrd memory: 18684K (ffff880035b72000 - 
ffff880036db1000)
[    0.901195] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.901196] software IO TLB [mem 0xba47a000-0xbe47a000] (64MB) mapped at 
[ffff8800ba47a000-ffff8800be479fff]
[    0.901241] perf: AMD NB counters detected
[    0.901331] microcode: CPU0: patch_level=0x06000803
[    0.901340] microcode: CPU1: patch_level=0x06000803
[    0.901344] microcode: CPU2: patch_level=0x06000803
[    0.901351] microcode: CPU3: patch_level=0x06000803
[    0.901360] microcode: CPU4: patch_level=0x06000803
[    0.901367] microcode: CPU5: patch_level=0x06000803
[    0.901375] microcode: CPU6: patch_level=0x06000803
[    0.901382] microcode: CPU7: patch_level=0x06000803
[    0.901431] microcode: Microcode Update Driver: v2.00 
<tig...@aivazian.fsnet.co.uk>, Peter Oruba
[    0.901435] LVT offset 0 assigned for vector 0x400
[    0.901457] perf: AMD IBS detected (0x000000ff)
[    0.901808] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.901856] audit: initializing netlink subsys (disabled)
[    0.901871] audit: type=2000 audit(1449088876.791:1): initialized
[    0.902146] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.902163] zpool: loaded
[    0.902165] zbud: loaded
[    0.902280] VFS: Disk quotas dquot_6.6.0
[    0.902302] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.902642] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 
250)
[    0.902700] io scheduler noop registered
[    0.902704] io scheduler deadline registered
[    0.902723] io scheduler cfq registered (default)
[    0.903028] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.903034] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.903073] GHES: HEST is not enabled!
[    0.903123] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.903500] hpet_acpi_add: no address or irqs in _CRS
[    0.903507] Linux agpgart interface v0.103
[    0.903702] AMD IOMMUv2 driver by Joerg Roedel <jroe...@suse.de>
[    0.903703] AMD IOMMUv2 functionality not available on this system
[    0.904317] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.904656] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.904661] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.904794] mousedev: PS/2 mouse device common for all mice
[    0.904838] rtc_cmos 00:03: RTC can wake from S4
[    0.904928] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.904943] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram
[    0.904958] ledtrig-cpu: registered to indicate activity on CPUs
[    0.905577] NET: Registered protocol family 10
[    0.905740] mip6: Mobile IPv6
[    0.905743] NET: Registered protocol family 17
[    0.905747] mpls_gso: MPLS GSO support
[    0.906315] registered taskstats version 1
[    0.906328] zswap: loading zswap
[    0.906330] zswap: using zbud pool
[    0.906331] zswap: using lzo compressor
[    0.906713] rtc_cmos 00:03: setting system clock to 2015-12-02 20:41:17 UTC 
(1449088877)
[    0.906771] PM: Hibernation image not present or could not be loaded.
[    0.907114] Freeing unused kernel memory: 1292K (ffffffff81b13000 - 
ffffffff81c56000)
[    0.907115] Write protecting the kernel read-only data: 10240k
[    0.907398] Freeing unused kernel memory: 660K (ffff88000155b000 - 
ffff880001600000)
[    0.907775] Freeing unused kernel memory: 1348K (ffff8800018af000 - 
ffff880001a00000)
[    0.952599] random: systemd-udevd urandom read with 4 bits of entropy 
available
[    0.983571] ACPI: bus type USB registered
[    0.983606] usbcore: registered new interface driver usbfs
[    0.983616] SCSI subsystem initialized
[    0.983618] usbcore: registered new interface driver hub
[    0.983661] usbcore: registered new device driver usb
[    0.984119] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.984462] ehci-pci: EHCI PCI platform driver
[    0.984625] QUIRK: Enable AMD PLL fix
[    0.984647] ehci-pci 0000:00:12.2: EHCI Host Controller
[    0.984654] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus 
number 1
[    0.984658] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI 
dummy qh workaround
[    0.984665] ehci-pci 0000:00:12.2: debug port 1
[    0.984699] ehci-pci 0000:00:12.2: irq 17, io mem 0xf7509000
[    0.984717] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.985985] libata version 3.00 loaded.
[    0.986344] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.986352] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM 
control
[    0.986915] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 
0xffffc90003146000, 94:de:80:24:49:74, XID 0c900800 IRQ 28
[    0.986918] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx 
checksumming: ko]
[    0.995523] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    0.995605] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.995607] usb usb1: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    0.995608] usb usb1: Product: EHCI Host Controller
[    0.995610] usb usb1: Manufacturer: Linux 4.2.0-1-amd64 ehci_hcd
[    0.995611] usb usb1: SerialNumber: 0000:00:12.2
[    0.995741] hub 1-0:1.0: USB hub found
[    0.995753] hub 1-0:1.0: 5 ports detected
[    0.995951] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.995960] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus 
number 2
[    0.996030] xhci_hcd 0000:02:00.0: hcc params 0x040050af hci version 0x100 
quirks 0x00080490
[    0.996167] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.996170] usb usb2: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    0.996173] usb usb2: Product: xHCI Host Controller
[    0.996175] usb usb2: Manufacturer: Linux 4.2.0-1-amd64 xhci-hcd
[    0.996177] usb usb2: SerialNumber: 0000:02:00.0
[    0.996299] hub 2-0:1.0: USB hub found
[    0.996315] hub 2-0:1.0: 2 ports detected
[    0.996460] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.996464] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus 
number 3
[    0.996468] ehci-pci 0000:00:13.2: EHCI Host Controller
[    0.996502] usb usb3: We don't know the algorithms for LPM for this host, 
disabling LPM.
[    0.996559] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    0.996561] usb usb3: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    0.996562] usb usb3: Product: xHCI Host Controller
[    0.996564] usb usb3: Manufacturer: Linux 4.2.0-1-amd64 xhci-hcd
[    0.996565] usb usb3: SerialNumber: 0000:02:00.0
[    0.996683] hub 3-0:1.0: USB hub found
[    0.996697] hub 3-0:1.0: 2 ports detected
[    0.996822] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus 
number 4
[    0.996826] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI 
dummy qh workaround
[    0.996836] ehci-pci 0000:00:13.2: debug port 1
[    0.996862] ehci-pci 0000:00:13.2: irq 17, io mem 0xf7507000
[    1.007523] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.007602] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    1.007604] usb usb4: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.007606] usb usb4: Product: EHCI Host Controller
[    1.007607] usb usb4: Manufacturer: Linux 4.2.0-1-amd64 ehci_hcd
[    1.007609] usb usb4: SerialNumber: 0000:00:13.2
[    1.007729] hub 4-0:1.0: USB hub found
[    1.007740] hub 4-0:1.0: 5 ports detected
[    1.007908] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    1.007914] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus 
number 5
[    1.007997] xhci_hcd 0000:06:00.0: hcc params 0x040050af hci version 0x100 
quirks 0x00080490
[    1.008131] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    1.008134] usb usb5: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.008136] usb usb5: Product: xHCI Host Controller
[    1.008137] usb usb5: Manufacturer: Linux 4.2.0-1-amd64 xhci-hcd
[    1.008138] usb usb5: SerialNumber: 0000:06:00.0
[    1.008257] hub 5-0:1.0: USB hub found
[    1.008270] hub 5-0:1.0: 2 ports detected
[    1.008386] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    1.008389] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus 
number 6
[    1.008395] ehci-pci 0000:00:16.2: EHCI Host Controller
[    1.008424] usb usb6: We don't know the algorithms for LPM for this host, 
disabling LPM.
[    1.008481] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    1.008483] usb usb6: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.008485] usb usb6: Product: xHCI Host Controller
[    1.008486] usb usb6: Manufacturer: Linux 4.2.0-1-amd64 xhci-hcd
[    1.008487] usb usb6: SerialNumber: 0000:06:00.0
[    1.008589] hub 6-0:1.0: USB hub found
[    1.008602] hub 6-0:1.0: 2 ports detected
[    1.008719] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus 
number 7
[    1.008723] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI 
dummy qh workaround
[    1.008731] ehci-pci 0000:00:16.2: debug port 1
[    1.008780] ehci-pci 0000:00:16.2: irq 17, io mem 0xf7504000
[    1.019559] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.019650] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    1.019652] usb usb7: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.019654] usb usb7: Product: EHCI Host Controller
[    1.019655] usb usb7: Manufacturer: Linux 4.2.0-1-amd64 ehci_hcd
[    1.019656] usb usb7: SerialNumber: 0000:00:16.2
[    1.019769] hub 7-0:1.0: USB hub found
[    1.019781] hub 7-0:1.0: 4 ports detected
[    1.020231] ohci-pci: OHCI PCI platform driver
[    1.020893] scsi host0: pata_atiixp
[    1.021004] scsi host1: pata_atiixp
[    1.021052] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    1.021053] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    1.021076] ahci 0000:00:11.0: version 3.0
[    1.021224] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf 
impl SATA mode
[    1.021227] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio 
slum part 
[    1.021737] scsi host2: ahci
[    1.021835] scsi host3: ahci
[    1.021933] scsi host4: ahci
[    1.022032] scsi host5: ahci
[    1.022075] ata3: SATA max UDMA/133 abar m1024@0xf750b000 port 0xf750b100 
irq 19
[    1.022078] ata4: SATA max UDMA/133 abar m1024@0xf750b000 port 0xf750b180 
irq 19
[    1.022079] ata5: SATA max UDMA/133 abar m1024@0xf750b000 port 0xf750b200 
irq 19
[    1.022081] ata6: SATA max UDMA/133 abar m1024@0xf750b000 port 0xf750b280 
irq 19
[    1.022165] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.022172] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus 
number 8
[    1.022191] ohci-pci 0000:00:12.0: irq 18, io mem 0xf750a000
[    1.022233] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 
impl SATA mode
[    1.022235] ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio 
slum part sxs 
[    1.022505] scsi host6: ahci
[    1.022596] scsi host7: ahci
[    1.022638] ata7: SATA max UDMA/133 abar m512@0xf7310000 port 0xf7310100 irq 
32
[    1.022640] ata8: SATA max UDMA/133 abar m512@0xf7310000 port 0xf7310180 irq 
32
[    1.047606] firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 
IR + 8 IT contexts, quirks 0x11
[    1.079605] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.079607] usb usb8: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.079609] usb usb8: Product: OHCI PCI host controller
[    1.079610] usb usb8: Manufacturer: Linux 4.2.0-1-amd64 ohci_hcd
[    1.079611] usb usb8: SerialNumber: 0000:00:12.0
[    1.079722] hub 8-0:1.0: USB hub found
[    1.079729] hub 8-0:1.0: 5 ports detected
[    1.079893] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.079897] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus 
number 9
[    1.079910] ohci-pci 0000:00:13.0: irq 18, io mem 0xf7508000
[    1.139646] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[    1.139647] usb usb9: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.139649] usb usb9: Product: OHCI PCI host controller
[    1.139650] usb usb9: Manufacturer: Linux 4.2.0-1-amd64 ohci_hcd
[    1.139651] usb usb9: SerialNumber: 0000:00:13.0
[    1.139756] hub 9-0:1.0: USB hub found
[    1.139763] hub 9-0:1.0: 5 ports detected
[    1.139921] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.139926] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus 
number 10
[    1.139940] ohci-pci 0000:00:14.5: irq 18, io mem 0xf7506000
[    1.199679] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[    1.199681] usb usb10: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.199682] usb usb10: Product: OHCI PCI host controller
[    1.199683] usb usb10: Manufacturer: Linux 4.2.0-1-amd64 ohci_hcd
[    1.199685] usb usb10: SerialNumber: 0000:00:14.5
[    1.199791] hub 10-0:1.0: USB hub found
[    1.199797] hub 10-0:1.0: 2 ports detected
[    1.199920] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    1.199925] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus 
number 11
[    1.199937] ohci-pci 0000:00:16.0: irq 18, io mem 0xf7505000
[    1.259750] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
[    1.259753] usb usb11: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.259754] usb usb11: Product: OHCI PCI host controller
[    1.259755] usb usb11: Manufacturer: Linux 4.2.0-1-amd64 ohci_hcd
[    1.259757] usb usb11: SerialNumber: 0000:00:16.0
[    1.259875] hub 11-0:1.0: USB hub found
[    1.259881] hub 11-0:1.0: 4 ports detected
[    1.311731] usb 1-5: new high-speed USB device number 2 using ehci-pci
[    1.311742] usb 2-1: new full-speed USB device number 2 using xhci_hcd
[    1.339780] ata7: SATA link down (SStatus 0 SControl 300)
[    1.339814] ata8: SATA link down (SStatus 0 SControl 300)
[    1.445718] usb 1-5: New USB device found, idVendor=05ac, idProduct=12a8
[    1.445721] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.445722] usb 1-5: Product: iPhone
[    1.445723] usb 1-5: Manufacturer: Apple Inc.
[    1.445724] usb 1-5: SerialNumber: 2367d175308271d336838fcb3837c9c97d081863
[    1.474977] usb 2-1: New USB device found, idVendor=05ac, idProduct=1002
[    1.474980] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.474981] usb 2-1: Product: Hub in Apple Extended USB Keyboard
[    1.474982] usb 2-1: Manufacturer: Mitsumi Electric
[    1.475063] usb 2-1: ep 0x81 - rounding interval to 1024 microframes, ep 
desc says 2040 microframes
[    1.476980] hub 2-1:1.0: USB hub found
[    1.480952] hub 2-1:1.0: 3 ports detected
[    1.511895] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.511916] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.511935] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.511953] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.512557] ata6.00: ATAPI: TSSTcorp CDDVDW TS-H653N, 0609, max UDMA/33
[    1.512650] ata5.00: ATA-8: WDC WD4000AAJS-65YFA0, 12.01C02, max UDMA/133
[    1.512652] ata5.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.512701] ata4.00: ATA-8: ST2000DM001-1CH164, CC26, max UDMA/133
[    1.512704] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), 
AA
[    1.513457] ata5.00: configured for UDMA/133
[    1.513473] ata6.00: configured for UDMA/33
[    1.513515] ata4.00: configured for UDMA/133
[    1.513702] ata3.00: ATA-8: PLEXTOR PX-128M5Pro, 1.05, max UDMA/133
[    1.513705] ata3.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.513967] ata3.00: configured for UDMA/133
[    1.514075] scsi 2:0:0:0: Direct-Access     ATA      PLEXTOR PX-128M5 1.05 
PQ: 0 ANSI: 5
[    1.514344] scsi 3:0:0:0: Direct-Access     ATA      ST2000DM001-1CH1 CC26 
PQ: 0 ANSI: 5
[    1.514574] scsi 4:0:0:0: Direct-Access     ATA      WDC WD4000AAJS-6 1C02 
PQ: 0 ANSI: 5
[    1.515323] scsi 5:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-H653N  0609 
PQ: 0 ANSI: 5
[    1.521638] sd 2:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 
GiB)
[    1.521713] sd 2:0:0:0: [sda] Write Protect is off
[    1.521716] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.521720] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 
TB/1.81 TiB)
[    1.521729] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    1.521739] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    1.521776] sd 4:0:0:0: [sdc] 781422768 512-byte logical blocks: (400 GB/372 
GiB)
[    1.521780] sd 3:0:0:0: [sdb] Write Protect is off
[    1.521783] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.521815] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    1.521844] sd 4:0:0:0: [sdc] Write Protect is off
[    1.521847] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.521869] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    1.522233]  sda: sda1 sda2 < sda5 >
[    1.522556] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.533933] sr 5:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw 
xa/form2 cdda tray
[    1.533936] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.534038] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.547974] firewire_core 0000:04:0e.0: created device fw0: GUID 
0049e550ce180b00, S400
[    1.562643]  sdb: sdb1 < sdb5 > sdb2
[    1.562975] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.573602]  sdc: sdc1
[    1.573864] sd 4:0:0:0: [sdc] Attached SCSI disk
[    1.595926] usb 11-3: new full-speed USB device number 2 using ohci-pci
[    1.603936] usb 2-2: new high-speed USB device number 3 using xhci_hcd
[    1.732988] usb 2-2: New USB device found, idVendor=03f0, idProduct=2f24
[    1.732991] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.733276] hub 2-2:1.0: USB hub found
[    1.733609] hub 2-2:1.0: 6 ports detected
[    1.769144] usb 11-3: New USB device found, idVendor=1b1c, idProduct=0c04
[    1.769146] usb 11-3: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[    1.769147] usb 11-3: Product: Integrated USB Bridge
[    1.769149] usb 11-3: Manufacturer: Corsair Memory, Inc.
[    1.772441] hidraw: raw HID events driver (C) Jiri Kosina
[    1.775240] usbcore: registered new interface driver usbhid
[    1.775241] usbhid: USB HID core driver
[    1.777250] hid-generic 0003:1B1C:0C04.0001: hiddev0,hidraw0: USB HID v1.11 
Device [Corsair Memory, Inc. Integrated USB Bridge] on usb-0000:00:16.0-3/input0
[    1.808069] usb 2-1.1: new full-speed USB device number 4 using xhci_hcd
[    1.856891] platform microcode: firmware: direct-loading firmware 
amd-ucode/microcode_amd_fam15h.bin
[    1.861875] microcode: CPU0: new patch_level=0x06000832
[    1.866856] microcode: CPU2: new patch_level=0x06000832
[    1.871945] microcode: CPU4: new patch_level=0x06000832
[    1.876929] microcode: CPU6: new patch_level=0x06000832
[    1.900115] tsc: Refined TSC clocksource calibration: 4018.341 MHz
[    1.900119] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 
0x39ec0aabc83, max_idle_ns: 440795330368 ns
[    1.938257] usb 2-1.1: New USB device found, idVendor=05ac, idProduct=0204
[    1.938260] usb 2-1.1: New USB device strings: Mfr=1, Product=3, 
SerialNumber=0
[    1.938262] usb 2-1.1: Product: Apple Extended USB Keyboard
[    1.938263] usb 2-1.1: Manufacturer: Mitsumi Electric
[    1.938366] usb 2-1.1: ep 0x81 - rounding interval to 64 microframes, ep 
desc says 80 microframes
[    1.938371] usb 2-1.1: ep 0x82 - rounding interval to 1024 microframes, ep 
desc says 2040 microframes
[    1.953514] input: Mitsumi Electric Apple Extended USB Keyboard as 
/devices/pci0000:00/0000:00:09.0/0000:02:00.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:05AC:0204.0002/input/input2
[    1.960144] raid6: sse2x1   gen()  7154 MB/s
[    2.008309] hid-generic 0003:05AC:0204.0002: input,hidraw1: USB HID v1.10 
Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on 
usb-0000:02:00.0-1.1/input0
[    2.028184] raid6: sse2x1   xor()  4846 MB/s
[    2.031366] input: Mitsumi Electric Apple Extended USB Keyboard as 
/devices/pci0000:00/0000:00:09.0/0000:02:00.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:05AC:0204.0003/input/input3
[    2.084277] hid-generic 0003:05AC:0204.0003: input,hidraw2: USB HID v1.10 
Device [Mitsumi Electric Apple Extended USB Keyboard] on 
usb-0000:02:00.0-1.1/input1
[    2.096239] raid6: sse2x2   gen() 11179 MB/s
[    2.164275] raid6: sse2x2   xor()  7677 MB/s
[    2.164294] usb 2-1.2: new full-speed USB device number 5 using xhci_hcd
[    2.232321] raid6: sse2x4   gen() 12968 MB/s
[    2.298498] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c52f
[    2.298500] usb 2-1.2: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[    2.298502] usb 2-1.2: Product: USB Receiver
[    2.298503] usb 2-1.2: Manufacturer: Logitech
[    2.300362] raid6: sse2x4   xor()  6688 MB/s
[    2.300363] raid6: using algorithm sse2x4 gen() 12968 MB/s
[    2.300365] raid6: .... xor() 6688 MB/s, rmw enabled
[    2.300368] raid6: using ssse3x2 recovery algorithm
[    2.300584] xor: automatically using best checksumming function:
[    2.319742] input: Logitech USB Receiver as 
/devices/pci0000:00/0000:00:09.0/0000:02:00.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C52F.0004/input/input4
[    2.319808] hid-generic 0003:046D:C52F.0004: input,hidraw3: USB HID v1.11 
Mouse [Logitech USB Receiver] on usb-0000:02:00.0-1.2/input0
[    2.340387]    avx       :  4777.000 MB/sec
[    2.344051] Btrfs loaded
[    2.344626] input: Logitech USB Receiver as 
/devices/pci0000:00/0000:00:09.0/0000:02:00.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C52F.0005/input/input5
[    2.400564] hid-generic 0003:046D:C52F.0005: input,hiddev0,hidraw4: USB HID 
v1.11 Device [Logitech USB Receiver] on usb-0000:02:00.0-1.2/input1
[    2.407508] PM: Starting manual resume from disk
[    2.407511] PM: Hibernation image partition 8:5 present
[    2.407512] PM: Looking for hibernation image.
[    2.407580] PM: Image not found (code -22)
[    2.407581] PM: Hibernation image not present or could not be loaded.
[    2.432658] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 
(null)
[    2.506580] systemd[1]: Failed to insert module 'kdbus': Function not 
implemented
[    2.511100] systemd[1]: systemd 228 running in system mode. (+PAM +AUDIT 
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS 
+ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    2.511289] systemd[1]: Detected architecture x86-64.
[    2.511602] systemd[1]: Set hostname to <horus>.
[    2.604312] systemd[1]: Reached target Remote File Systems (Pre).
[    2.604377] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.604400] systemd[1]: Listening on udev Kernel Socket.
[    2.604499] systemd[1]: Set up automount Arbitrary Executable File Formats 
File System Automount Point.
[    2.604530] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    2.604595] systemd[1]: Started Forward Password Requests to Wall Directory 
Watch.
[    2.604631] systemd[1]: Listening on udev Control Socket.
[    2.604658] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.604745] systemd[1]: Created slice System Slice.
[    2.604817] systemd[1]: Created slice system-getty.slice.
[    2.604879] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.604934] systemd[1]: Listening on Journal Audit Socket.
[    2.604969] systemd[1]: Listening on Journal Socket.
[    2.605322] systemd[1]: Mounting Huge Pages File System...
[    2.606766] systemd[1]: Starting Create list of required static device nodes 
for the current kernel...
[    2.607218] systemd[1]: Starting Journal Service...
[    2.607608] random: nonblocking pool is initialized
[    2.608736] systemd[1]: Starting Load Kernel Modules...
[    2.609145] systemd[1]: Mounting POSIX Message Queue File System...
[    2.609168] systemd[1]: Reached target Encrypted Volumes.
[    2.609639] systemd[1]: Mounting Debug File System...
[    2.610199] systemd[1]: Starting Nameserver information manager...
[    2.610234] systemd[1]: Reached target User and Group Name Lookups.
[    2.610332] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    2.610357] systemd[1]: Reached target Network (Pre).
[    2.610445] systemd[1]: Created slice User and Session Slice.
[    2.610462] systemd[1]: Reached target Slices.
[    2.610505] systemd[1]: Listening on LVM2 metadata daemon socket.
[    2.610946] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. 
using dmeventd or progress polling...
[    2.610978] systemd[1]: Reached target Remote File Systems.
[    2.611505] systemd[1]: Starting LSB: Prepare console...
[    2.611928] systemd[1]: Starting LSB: Daemon for ZFS support via FUSE...
[    2.612038] systemd[1]: Created slice system-postgresql.slice.
[    2.612089] systemd[1]: Listening on LVM2 poll daemon socket.
[    2.613497] systemd[1]: Started Create list of required static device nodes 
for the current kernel.
[    2.614917] systemd[1]: Starting Create Static Device Nodes in /dev...
[    2.627388] lp: driver loaded but no devices found
[    2.628652] ppdev: user-space parallel port driver
[    2.633812] loop: module loaded
[    2.638910] it87: Found IT8728F chip at 0x228, revision 1
[    2.638931] it87: Beeping is supported
[    2.642001] systemd[1]: Mounted Debug File System.
[    2.642065] systemd[1]: Mounted Huge Pages File System.
[    2.642107] systemd[1]: Mounted POSIX Message Queue File System.
[    2.643333] pore:registration was successful.
[    2.643336] Power Profiler:version is 4.9-2
[    2.643338] Power Profiler:device name: amdtPwrProf, major device number: 
247.
[    2.647197] systemd[1]: Started Nameserver information manager.
[    2.651937] [drm] Initialized drm 1.1.0 20060810
[    2.652461] systemd[1]: Started LVM2 metadata daemon.
[    2.654658] systemd[1]: Started Create Static Device Nodes in /dev.
[    2.655325] systemd[1]: Starting udev Kernel Device Manager...
[    2.661885] systemd[1]: Started Journal Service.
[    2.710325] nvidia: module license 'NVIDIA' taints kernel.
[    2.710328] Disabling lock debugging due to kernel taint
[    2.722718] vgaarb: device changed decodes: 
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    2.723096] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on 
minor 0
[    2.723104] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.96  Sun Nov  
8 22:33:28 PST 2015
[    2.725900] fuse init (API version 7.23)
[    2.814038] EXT4-fs (sda1): re-mounted. Opts: 
discard,commit=600,errors=remount-ro
[    2.821149] systemd-journald[280]: Received request to flush runtime journal 
from PID 1
[    2.871308] input: Power Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[    2.871314] ACPI: Power Button [PWRB]
[    2.871516] input: Power Button as 
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    2.871518] ACPI: Power Button [PWRF]
[    2.871710] ACPI: acpi_idle registered with cpuidle
[    2.874167] acpi-cpufreq: overriding BIOS provided _PSD data
[    2.875158] wmi: Mapper loaded
[    2.893983] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.903848] clocksource: Switched to clocksource tsc
[    2.921211] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, 
revision 0
[    2.922534] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    2.922689] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.922738] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    2.922795] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.922840] sr 5:0:0:0: Attached scsi generic sg3 type 5
[    2.923388] EDAC MC: Ver: 3.0.0
[    2.927198] MCE: In-kernel MCE decoding enabled.
[    2.932823] AMD64 EDAC driver v3.4.0
[    2.946209] AVX version of gcm_enc/dec engaged.
[    2.946211] AES CTR mode by8 optimization enabled
[    2.997928] sha256_ssse3: Using AVX optimized SHA-256 implementation
[    3.032851] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 
0xb20
[    3.185391] EDAC amd64: DRAM ECC disabled.
[    3.185429] EDAC amd64: ECC disabled in the BIOS or no ECC capability, 
module will not load.
                Either enable ECC checking or force module loading by setting 
'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    3.354148] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    3.354264] sp5100_tco: PCI Revision ID: 0x42
[    3.354312] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[    3.354325] sp5100_tco: Last reboot was not triggered by watchdog.
[    3.354437] sp5100_tco: initialized (0xffffc90003570b00). heartbeat=60 sec 
(nowayout=0)
[    3.406494] Adding 19529724k swap on /dev/sda5.  Priority:-1 extents:1 
across:19529724k SSDscFS
[    3.413199] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC889: 
line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    3.413208] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 
(0x0/0x0/0x0/0x0/0x0)
[    3.413213] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 
(0x1b/0x0/0x0/0x0/0x0)
[    3.413217] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.413221] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
[    3.413224] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.413229] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    3.413234] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    3.413238] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    3.417415] kvm: Nested Virtualization enabled
[    3.417420] kvm: Nested Paging enabled
[    3.430646] input: HDA ATI SB Front Mic as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    3.430868] input: HDA ATI SB Rear Mic as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input11
[    3.431040] input: HDA ATI SB Line as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input12
[    3.431213] input: HDA ATI SB Line Out Front as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input13
[    3.431393] input: HDA ATI SB Line Out Surround as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input14
[    3.431579] input: HDA ATI SB Line Out CLFE as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input15
[    3.431786] input: HDA ATI SB Line Out Side as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input16
[    3.431954] input: HDA ATI SB Front Headphone as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input17
[    3.674831] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: 
(null)
[    3.845366] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: 
data=ordered
[    4.050599] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.053680] r8169 0000:05:00.0: firmware: direct-loading firmware 
rtl_nic/rtl8168e-3.fw
[    4.090504] vboxdrv: Found 8 processor cores
[    4.109710] vboxdrv: TSC mode is Invariant, tentative frequency 4018335101 Hz
[    4.109713] vboxdrv: Successfully loaded version 5.0.10 (interface 
0x00240000)
[    4.160001] r8169 0000:05:00.0 eth0: link down
[    4.160038] r8169 0000:05:00.0 eth0: link down
[    4.160062] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.160481] ipheth 1-5:4.2: Apple iPhone USB Ethernet device attached
[    4.160527] usbcore: registered new interface driver ipheth
[    4.164484] ipheth 1-5:4.2 enx8e2937049a60: renamed from eth1
[    4.198901] IPv6: ADDRCONF(NETDEV_UP): enx8e2937049a60: link is not ready
[    4.199455] IPv6: ADDRCONF(NETDEV_UP): enx8e2937049a60: link is not ready
[    4.321780] VBoxNetFlt: Successfully started.
[    4.326148] VBoxNetAdp: Successfully started.
[    4.330210] VBoxPciLinuxInit
[    4.334004] vboxpci: IOMMU not found (not registered)
[    5.788421] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.798984] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    5.821915] Ebtables v2.0 registered
[    6.454597] r8169 0000:05:00.0 eth0: link up
[    6.454613] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

--- End Message ---

Reply via email to