Bug#768844: marked as done (FTBFS: "FAIL: If not enough points reached control should continue")

[Debian Bug Tracking System]

Your message dated Sun, 16 Nov 2014 21:19:06 +0000
with message-id <e1xq7du-000527...@franck.debian.org>
and subject line Bug#768844: fixed in ask 1.0.1-2
has caused the Debian Bug report #768844,
regarding FTBFS: "FAIL: If not enough points reached control should continue"
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)


-- 
768844: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=768844
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems

--- Begin Message ---

Package: src:ask
Version: 1.0.1-1
Severity: serious
Justification: fails to build from source (but built successfully in the past)

Hi!
I'm afraid that during a rebuild of jessie on armhf your package failed to
build:

   dh_auto_test
make[1]: Entering directory '/«PKGBUILDDIR»'
nosetests
.................F...........
======================================================================
FAIL: If not enough points reached control should continue
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/«PKGBUILDDIR»/tests/test-0003-control.py", line 48, in 
test_points_control_continue
    assert r.returncode == 0, "control should continue with 0 return code"
AssertionError: control should continue with 0 return code
-------------------- >> begin captured stdout << ---------------------
/«PKGBUILDDIR»/control/points

--------------------- >> end captured stdout << ----------------------


The failure persists over retries, on the other hand, an attempt on amd64
was successful.

Full log attached.

-- System Information:
Debian Release: jessie/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: armhf (armv7l)

Kernel: Linux 3.8.13.28 (SMP w/4 CPU cores; PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

sbuild (Debian sbuild) 0.65.0 (16 Oct 2014) on kholdan.angband.pl

╔══════════════════════════════════════════════════════════════════════════════╗
║ ask 1.0.1-1 (armhf)                                        09 Nov 2014 15:58 ║
╚══════════════════════════════════════════════════════════════════════════════╝

Package: ask
Version: 1.0.1-1
Source Version: 1.0.1-1
Distribution: jessie
Machine Architecture: armhf
Host Architecture: armhf
Build Architecture: armhf

I: NOTICE: Log filtering will replace 'build/ask-EVH_nq/ask-1.0.1' with 
'«PKGBUILDDIR»'
I: NOTICE: Log filtering will replace 'build/ask-EVH_nq' with '«BUILDDIR»'
I: NOTICE: Log filtering will replace 
'var/lib/schroot/mount/jessie-armhf-sbuild-8e26efd3-9e8c-4ece-b34a-40926f2d2e8b'
 with '«CHROOT»'

┌──────────────────────────────────────────────────────────────────────────────┐
│ Update chroot                                                                │
└──────────────────────────────────────────────────────────────────────────────┘

Hit http://apt.angband.pl:3142 jessie InRelease
Get:1 http://apt.angband.pl:3142 jessie/main Sources/DiffIndex [7876 B]
Get:2 http://apt.angband.pl:3142 jessie/main armhf Packages/DiffIndex [7876 B]
Get:3 http://apt.angband.pl:3142 jessie/main Translation-en/DiffIndex [7876 B]
Fetched 23.6 kB in 5s (3944 B/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

┌──────────────────────────────────────────────────────────────────────────────┐
│ Fetch source files                                                           │
└──────────────────────────────────────────────────────────────────────────────┘


Check APT
─────────

Checking available source versions...

Download source files with APT
──────────────────────────────

Reading package lists...
Building dependency tree...
Reading state information...
NOTICE: 'ask' packaging is maintained in the 'Git' version control system at:
git://git.debian.org/git/debian-science/packages/ask.git
Need to get 22.9 MB of source archives.
Get:1 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main ask 
1.0.1-1 (dsc) [1552 B]
Get:2 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main ask 
1.0.1-1 (tar) [22.9 MB]
Get:3 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main ask 
1.0.1-1 (diff) [4543 B]
Fetched 22.9 MB in 3s (5875 kB/s)
Download complete and in download only mode

Check architectures
───────────────────


Check dependencies
──────────────────

Merged Build-Depends: build-essential, fakeroot
Filtered Build-Depends: build-essential, fakeroot
dpkg-deb: building package `sbuild-build-depends-core-dummy' in 
`/«BUILDDIR»/resolver-S7ajxz/apt_archive/sbuild-build-depends-core-dummy.deb'.
OK
Ign file: ./ InRelease
Get:1 file: ./ Release.gpg [299 B]
Get:2 file: ./ Release [2119 B]
Ign file: ./ Translation-en
Reading package lists...
Reading package lists...

┌──────────────────────────────────────────────────────────────────────────────┐
│ Install core build dependencies (apt-based resolver)                         │
└──────────────────────────────────────────────────────────────────────────────┘

Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
  sbuild-build-depends-core-dummy
debconf: delaying package configuration, since apt-utils is not installed
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/828 B of archives.
After this operation, 0 B of additional disk space will be used.
Selecting previously unselected package sbuild-build-depends-core-dummy.
(Reading database ... 12100 files and directories currently installed.)
Preparing to unpack .../sbuild-build-depends-core-dummy.deb ...
Unpacking sbuild-build-depends-core-dummy (0.invalid.0) ...
Setting up sbuild-build-depends-core-dummy (0.invalid.0) ...
Merged Build-Depends: libc6-dev | libc-dev, gcc (>= 4:4.9.1), g++ (>= 4:4.9.1), 
make, dpkg-dev (>= 1.17.11), debhelper (>= 8.0.0), texlive-latex-base, 
texlive-latex-extra, latex-xcolor, python (>= 2.6), python-pygments, 
python-nose, python-argparse, python-numpy, python-scipy, r-base-core (>= 2.5), 
r-cran-gbm, r-cran-rpart, r-cran-lattice, r-cran-rjson, r-cran-lhs, r-cran-tgp, 
r-cran-inline, r-cran-foptions
Filtered Build-Depends: libc6-dev, gcc (>= 4:4.9.1), g++ (>= 4:4.9.1), make, 
dpkg-dev (>= 1.17.11), debhelper (>= 8.0.0), texlive-latex-base, 
texlive-latex-extra, latex-xcolor, python (>= 2.6), python-pygments, 
python-nose, python-argparse, python-numpy, python-scipy, r-base-core (>= 2.5), 
r-cran-gbm, r-cran-rpart, r-cran-lattice, r-cran-rjson, r-cran-lhs, r-cran-tgp, 
r-cran-inline, r-cran-foptions
dpkg-deb: building package `sbuild-build-depends-ask-dummy' in 
`/«BUILDDIR»/resolver-r5ZLfj/apt_archive/sbuild-build-depends-ask-dummy.deb'.
OK
Ign file: ./ InRelease
Get:1 file: ./ Release.gpg [299 B]
Get:2 file: ./ Release [2119 B]
Ign file: ./ Translation-en
Reading package lists...
Reading package lists...

┌──────────────────────────────────────────────────────────────────────────────┐
│ Install ask build dependencies (apt-based resolver)                          │
└──────────────────────────────────────────────────────────────────────────────┘

Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
  fontconfig fontconfig-config fonts-dejavu-core libavahi-client3
  libavahi-common-data libavahi-common3 libblas-common libblas3 libcairo2
  libcups2 libcupsfilters1 libcupsimage2 libdatrie1 libdbus-1-3 libexpat1
  libfontconfig1 libfreetype6 libgfortran3 libgnutls-deb0-28 libgraphite2-3
  libgs9 libgs9-common libgssapi-krb5-2 libharfbuzz-icu0 libharfbuzz0b
  libhogweed2 libice6 libicu52 libidn11 libijs-0.35 libjasper1 libjbig0
  libjbig2dec0 libjpeg62-turbo libk5crypto3 libkeyutils1 libkpathsea6
  libkrb5-3 libkrb5support0 liblapack3 liblcms2-2 libncursesw5 libnettle4
  libopenjpeg5 libp11-kit0 libpango-1.0-0 libpangocairo-1.0-0
  libpangoft2-1.0-0 libpaper-utils libpaper1 libpixman-1-0 libpng12-0
  libpoppler46 libpotrace0 libptexenc1 libpython-stdlib libpython2.7-minimal
  libpython2.7-stdlib libsm6 libsqlite3-0 libssl1.0.0 libsynctex1 libtasn1-6
  libtcl8.5 libthai-data libthai0 libtiff5 libtk8.5 libx11-6 libx11-data
  libxau6 libxaw7 libxcb-render0 libxcb-shm0 libxcb1 libxdmcp6 libxext6
  libxft2 libxi6 libxmu6 libxpm4 libxrender1 libxss1 libxt6 libzzip-0-13
  littler mime-support poppler-data preview-latex-style python
  python-decorator python-minimal python-nose python-numpy
  python-pkg-resources python-pygments python-scipy python2.7
  python2.7-minimal r-base-core r-cran-fbasics r-cran-foptions r-cran-gbm
  r-cran-inline r-cran-lattice r-cran-lhs r-cran-mass r-cran-rjson
  r-cran-rpart r-cran-stabledist r-cran-survival r-cran-tgp r-cran-timedate
  r-cran-timeseries tex-common texlive-base texlive-binaries
  texlive-latex-base texlive-latex-extra texlive-latex-recommended
  texlive-pictures ucf unzip x11-common xdg-utils zip
Suggested packages:
  cups-common gnutls-bin krb5-doc krb5-user libjasper-runtime liblcms2-utils
  tcl8.5 tk8.5 r-cran-getopt poppler-utils ghostscript fonts-japanese-mincho
  fonts-ipafont-mincho fonts-japanese-gothic fonts-ipafont-gothic
  fonts-arphic-ukai fonts-arphic-uming fonts-nanum python-doc python-tk
  python-coverage python-nose-doc gfortran python-dev python-numpy-dbg
  python-numpy-doc python-distribute python-distribute-doc ttf-bitstream-vera
  python2.7-doc binfmt-support ess r-doc-info r-doc-pdf r-mathlib r-base-html
  r-cran-runit r-cran-robustbase gv postscript-viewer perl-tk xpdf-reader
  pdf-viewer libfile-which-perl texlive-pstricks libtcltk-ruby dot2tex
  gvfs-bin
Recommended packages:
  dbus fonts-droid krb5-locales libgpm2 python-chardet python-imaging
  r-recommended r-base-dev r-doc-html lmodern ruby wish texlive-latex-base-doc
  texlive-fonts-recommended texlive-latex-extra-doc prosper
  texlive-latex-recommended-doc texlive-pictures-doc prerex
  libfile-mimeinfo-perl libnet-dbus-perl libx11-protocol-perl x11-utils
  x11-xserver-utils
The following NEW packages will be installed:
  fontconfig fontconfig-config fonts-dejavu-core libavahi-client3
  libavahi-common-data libavahi-common3 libblas-common libblas3 libcairo2
  libcups2 libcupsfilters1 libcupsimage2 libdatrie1 libdbus-1-3 libexpat1
  libfontconfig1 libfreetype6 libgfortran3 libgnutls-deb0-28 libgraphite2-3
  libgs9 libgs9-common libgssapi-krb5-2 libharfbuzz-icu0 libharfbuzz0b
  libhogweed2 libice6 libicu52 libidn11 libijs-0.35 libjasper1 libjbig0
  libjbig2dec0 libjpeg62-turbo libk5crypto3 libkeyutils1 libkpathsea6
  libkrb5-3 libkrb5support0 liblapack3 liblcms2-2 libncursesw5 libnettle4
  libopenjpeg5 libp11-kit0 libpango-1.0-0 libpangocairo-1.0-0
  libpangoft2-1.0-0 libpaper-utils libpaper1 libpixman-1-0 libpng12-0
  libpoppler46 libpotrace0 libptexenc1 libpython-stdlib libpython2.7-minimal
  libpython2.7-stdlib libsm6 libsqlite3-0 libssl1.0.0 libsynctex1 libtasn1-6
  libtcl8.5 libthai-data libthai0 libtiff5 libtk8.5 libx11-6 libx11-data
  libxau6 libxaw7 libxcb-render0 libxcb-shm0 libxcb1 libxdmcp6 libxext6
  libxft2 libxi6 libxmu6 libxpm4 libxrender1 libxss1 libxt6 libzzip-0-13
  littler mime-support poppler-data preview-latex-style python
  python-decorator python-minimal python-nose python-numpy
  python-pkg-resources python-pygments python-scipy python2.7
  python2.7-minimal r-base-core r-cran-fbasics r-cran-foptions r-cran-gbm
  r-cran-inline r-cran-lattice r-cran-lhs r-cran-mass r-cran-rjson
  r-cran-rpart r-cran-stabledist r-cran-survival r-cran-tgp r-cran-timedate
  r-cran-timeseries sbuild-build-depends-ask-dummy tex-common texlive-base
  texlive-binaries texlive-latex-base texlive-latex-extra
  texlive-latex-recommended texlive-pictures ucf unzip x11-common xdg-utils
  zip
0 upgraded, 127 newly installed, 0 to remove and 0 not upgraded.
Need to get 119 MB/119 MB of archives.
After this operation, 358 MB of additional disk space will be used.
Get:1 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libncursesw5 armhf 5.9+20140913-1 [103 kB]
Get:2 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libssl1.0.0 armhf 1.0.1j-1 [858 kB]
Get:3 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libnettle4 armhf 2.7.1-3 [182 kB]
Get:4 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libhogweed2 armhf 2.7.1-3 [116 kB]
Get:5 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libp11-kit0 armhf 0.20.7-1 [70.2 kB]
Get:6 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libtasn1-6 armhf 4.2-2 [42.9 kB]
Get:7 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libgnutls-deb0-28 armhf 3.3.8-3 [632 kB]
Get:8 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libkeyutils1 armhf 1.5.9-5 [10.8 kB]
Get:9 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libkrb5support0 armhf 1.12.1+dfsg-11 [54.1 kB]
Get:10 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libk5crypto3 armhf 1.12.1+dfsg-11 [110 kB]
Get:11 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libkrb5-3 armhf 1.12.1+dfsg-11 [260 kB]
Get:12 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libgssapi-krb5-2 armhf 1.12.1+dfsg-11 [129 kB]
Get:13 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libidn11 armhf 1.29-1 [133 kB]
Get:14 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libsqlite3-0 armhf 3.8.7-1 [383 kB]
Get:15 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libavahi-common-data armhf 0.6.31-4+b1 [98.8 kB]
Get:16 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libavahi-common3 armhf 0.6.31-4+b1 [48.1 kB]
Get:17 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libdbus-1-3 armhf 1.8.8-2 [146 kB]
Get:18 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libavahi-client3 armhf 0.6.31-4+b1 [51.1 kB]
Get:19 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libexpat1 armhf 2.1.0-6+b1 [61.7 kB]
Get:20 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libpng12-0 armhf 1.2.50-2+b1 [162 kB]
Get:21 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libfreetype6 armhf 2.5.2-2 [416 kB]
Get:22 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main ucf all 
3.0030 [69.7 kB]
Get:23 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
fonts-dejavu-core all 2.34-1 [1047 kB]
Get:24 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
fontconfig-config all 2.11.0-6.1 [275 kB]
Get:25 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libfontconfig1 armhf 2.11.0-6.1 [313 kB]
Get:26 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libpixman-1-0 armhf 0.32.6-3 [434 kB]
Get:27 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main libxau6 
armhf 1:1.0.8-1 [19.5 kB]
Get:28 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libxdmcp6 armhf 1:1.1.1-1 [25.0 kB]
Get:29 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main libxcb1 
armhf 1.10-3+b1 [41.1 kB]
Get:30 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libx11-data all 2:1.6.2-3 [126 kB]
Get:31 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libx11-6 armhf 2:1.6.2-3 [673 kB]
Get:32 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libxcb-render0 armhf 1.10-3+b1 [17.1 kB]
Get:33 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libxcb-shm0 armhf 1.10-3+b1 [11.4 kB]
Get:34 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libxext6 armhf 2:1.3.3-1 [48.4 kB]
Get:35 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libxrender1 armhf 1:0.9.8-1+b1 [28.8 kB]
Get:36 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libcairo2 armhf 1.14.0-2.1 [675 kB]
Get:37 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libcups2 armhf 1.7.5-7 [256 kB]
Get:38 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libcupsimage2 armhf 1.7.5-7 [114 kB]
Get:39 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libjpeg62-turbo armhf 1:1.3.1-10 [98.8 kB]
Get:40 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libjbig0 armhf 2.1-3.1 [28.3 kB]
Get:41 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libtiff5 armhf 4.0.3-10+b3 [197 kB]
Get:42 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libcupsfilters1 armhf 1.0.61-2 [98.6 kB]
Get:43 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libdatrie1 armhf 0.2.8-1 [29.2 kB]
Get:44 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libgfortran3 armhf 4.9.1-19 [157 kB]
Get:45 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libgraphite2-3 armhf 1.2.4-3 [47.8 kB]
Get:46 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libharfbuzz0b armhf 0.9.35-2 [468 kB]
Get:47 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libicu52 armhf 52.1-6 [6580 kB]
Get:48 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libharfbuzz-icu0 armhf 0.9.35-2 [359 kB]
Get:49 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
x11-common all 1:7.7+7 [287 kB]
Get:50 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main libice6 
armhf 2:1.0.9-1 [51.4 kB]
Get:51 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libijs-0.35 armhf 0.35-10 [18.3 kB]
Get:52 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libjasper1 armhf 1.900.1-debian1-2.1+b1 [112 kB]
Get:53 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
liblcms2-2 armhf 2.6-3+b3 [118 kB]
Get:54 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
fontconfig armhf 2.11.0-6.1 [402 kB]
Get:55 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libthai-data all 0.1.21-1 [159 kB]
Get:56 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libthai0 armhf 0.1.21-1 [43.2 kB]
Get:57 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libpango-1.0-0 armhf 1.36.8-2 [275 kB]
Get:58 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libpangoft2-1.0-0 armhf 1.36.8-2 [209 kB]
Get:59 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libpangocairo-1.0-0 armhf 1.36.8-2 [198 kB]
Get:60 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libpaper1 armhf 1.1.24+nmu3 [20.7 kB]
Get:61 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libopenjpeg5 armhf 1:1.5.2-3 [95.2 kB]
Get:62 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libpoppler46 armhf 0.26.5-2 [1109 kB]
Get:63 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main libsm6 
armhf 2:1.2.2-1 [31.3 kB]
Get:64 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libtcl8.5 armhf 8.5.17-1 [672 kB]
Get:65 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main libxft2 
armhf 2.3.2-1 [48.4 kB]
Get:66 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main libxss1 
armhf 1:1.2.2-1 [16.3 kB]
Get:67 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libtk8.5 armhf 8.5.17-1 [670 kB]
Get:68 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main libxt6 
armhf 1:1.1.4-1 [152 kB]
Get:69 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main libxmu6 
armhf 2:1.1.2-1 [51.2 kB]
Get:70 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main libxpm4 
armhf 1:3.5.11-1 [42.1 kB]
Get:71 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main libxaw7 
armhf 2:1.0.12-2 [161 kB]
Get:72 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main libxi6 
armhf 2:1.7.4-1+b1 [75.9 kB]
Get:73 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libzzip-0-13 armhf 0.13.62-3 [51.6 kB]
Get:74 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
poppler-data all 0.4.7-1 [1491 kB]
Get:75 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libpython2.7-minimal armhf 2.7.8-11 [376 kB]
Get:76 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
python2.7-minimal armhf 2.7.8-11 [1133 kB]
Get:77 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
mime-support all 3.57 [35.8 kB]
Get:78 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libpython2.7-stdlib armhf 2.7.8-11 [1801 kB]
Get:79 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
python2.7 armhf 2.7.8-11 [249 kB]
Get:80 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
python-minimal armhf 2.7.8-2 [40.0 kB]
Get:81 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libpython-stdlib armhf 2.7.8-2 [19.4 kB]
Get:82 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main python 
armhf 2.7.8-2 [151 kB]
Get:83 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libblas-common armhf 1.2.20110419-10 [8490 B]
Get:84 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libblas3 armhf 1.2.20110419-10 [127 kB]
Get:85 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libjbig2dec0 armhf 0.11+20120125-1 [43.9 kB]
Get:86 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libgs9-common all 9.06~dfsg-1.1 [1979 kB]
Get:87 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main libgs9 
armhf 9.06~dfsg-1.1 [1655 kB]
Get:88 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libkpathsea6 armhf 2014.20140926.35254-2 [145 kB]
Get:89 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
liblapack3 armhf 3.5.0-4 [1451 kB]
Get:90 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libpaper-utils armhf 1.1.24+nmu3 [16.9 kB]
Get:91 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libpotrace0 armhf 1.11-2 [22.5 kB]
Get:92 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libptexenc1 armhf 2014.20140926.35254-2 [51.9 kB]
Get:93 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
libsynctex1 armhf 2014.20140926.35254-2 [54.2 kB]
Get:94 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main zip 
armhf 3.0-8 [218 kB]
Get:95 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main unzip 
armhf 6.0-12 [153 kB]
Get:96 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
xdg-utils all 1.1.0~rc1+git20111210-7.1 [64.6 kB]
Get:97 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
r-base-core armhf 3.1.1-1+b2 [19.6 MB]
Get:98 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main littler 
armhf 0.2.1-1 [35.6 kB]
Get:99 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
tex-common all 5.03 [625 kB]
Get:100 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
preview-latex-style all 11.87-2 [318 kB]
Get:101 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
python-decorator all 3.4.0-2 [22.3 kB]
Get:102 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
python-pkg-resources all 5.5.1-1 [64.4 kB]
Get:103 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
python-nose all 1.3.4-1 [134 kB]
Get:104 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
python-numpy armhf 1:1.8.2-2 [1526 kB]
Get:105 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
python-pygments all 2.0~rc1.a2bc2bd+dfsg-1 [477 kB]
Get:106 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
r-cran-mass armhf 7.3-34-1 [1012 kB]
Get:107 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
r-cran-timedate armhf 3010.98-1 [801 kB]
Get:108 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
r-cran-timeseries armhf 3010.97-1 [693 kB]
Get:109 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
r-cran-stabledist all 0.6-6-1 [44.0 kB]
Get:110 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
r-cran-fbasics armhf 3010.86-1 [1248 kB]
Get:111 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
r-cran-foptions armhf 3010.83-1 [175 kB]
Get:112 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
r-cran-survival armhf 2.37-7-1 [4427 kB]
Get:113 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
r-cran-lattice armhf 0.20-29-1 [711 kB]
Get:114 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
r-cran-gbm armhf 2.1-1 [372 kB]
Get:115 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
r-cran-inline all 0.3.13-1 [79.7 kB]
Get:116 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
r-cran-lhs armhf 0.10-1 [168 kB]
Get:117 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
r-cran-rjson armhf 0.2.14-1 [110 kB]
Get:118 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
r-cran-rpart armhf 4.1-8-1 [853 kB]
Get:119 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
r-cran-tgp armhf 2.4-9-1 [2304 kB]
Get:120 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
texlive-binaries armhf 2014.20140926.35254-2 [6519 kB]
Get:121 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
texlive-base all 2014.20141024-1 [17.7 MB]
Get:122 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
texlive-latex-base all 2014.20141024-1 [858 kB]
Get:123 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
texlive-latex-recommended all 2014.20141024-1 [7630 kB]
Get:124 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
texlive-pictures all 2014.20141024-1 [3039 kB]
Get:125 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
texlive-latex-extra all 2014.20141024-1 [7604 kB]
Get:126 http://apt.angband.pl:3142/ftp.pl.debian.org/debian/ jessie/main 
python-scipy armhf 0.14.0-2 [7462 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 119 MB in 22s (5254 kB/s)
Selecting previously unselected package libncursesw5:armhf.
(Reading database ... 12100 files and directories currently installed.)
Preparing to unpack .../libncursesw5_5.9+20140913-1_armhf.deb ...
Unpacking libncursesw5:armhf (5.9+20140913-1) ...
Selecting previously unselected package libssl1.0.0:armhf.
Preparing to unpack .../libssl1.0.0_1.0.1j-1_armhf.deb ...
Unpacking libssl1.0.0:armhf (1.0.1j-1) ...
Selecting previously unselected package libnettle4:armhf.
Preparing to unpack .../libnettle4_2.7.1-3_armhf.deb ...
Unpacking libnettle4:armhf (2.7.1-3) ...
Selecting previously unselected package libhogweed2:armhf.
Preparing to unpack .../libhogweed2_2.7.1-3_armhf.deb ...
Unpacking libhogweed2:armhf (2.7.1-3) ...
Selecting previously unselected package libp11-kit0:armhf.
Preparing to unpack .../libp11-kit0_0.20.7-1_armhf.deb ...
Unpacking libp11-kit0:armhf (0.20.7-1) ...
Selecting previously unselected package libtasn1-6:armhf.
Preparing to unpack .../libtasn1-6_4.2-2_armhf.deb ...
Unpacking libtasn1-6:armhf (4.2-2) ...
Selecting previously unselected package libgnutls-deb0-28:armhf.
Preparing to unpack .../libgnutls-deb0-28_3.3.8-3_armhf.deb ...
Unpacking libgnutls-deb0-28:armhf (3.3.8-3) ...
Selecting previously unselected package libkeyutils1:armhf.
Preparing to unpack .../libkeyutils1_1.5.9-5_armhf.deb ...
Unpacking libkeyutils1:armhf (1.5.9-5) ...
Selecting previously unselected package libkrb5support0:armhf.
Preparing to unpack .../libkrb5support0_1.12.1+dfsg-11_armhf.deb ...
Unpacking libkrb5support0:armhf (1.12.1+dfsg-11) ...
Selecting previously unselected package libk5crypto3:armhf.
Preparing to unpack .../libk5crypto3_1.12.1+dfsg-11_armhf.deb ...
Unpacking libk5crypto3:armhf (1.12.1+dfsg-11) ...
Selecting previously unselected package libkrb5-3:armhf.
Preparing to unpack .../libkrb5-3_1.12.1+dfsg-11_armhf.deb ...
Unpacking libkrb5-3:armhf (1.12.1+dfsg-11) ...
Selecting previously unselected package libgssapi-krb5-2:armhf.
Preparing to unpack .../libgssapi-krb5-2_1.12.1+dfsg-11_armhf.deb ...
Unpacking libgssapi-krb5-2:armhf (1.12.1+dfsg-11) ...
Selecting previously unselected package libidn11:armhf.
Preparing to unpack .../libidn11_1.29-1_armhf.deb ...
Unpacking libidn11:armhf (1.29-1) ...
Selecting previously unselected package libsqlite3-0:armhf.
Preparing to unpack .../libsqlite3-0_3.8.7-1_armhf.deb ...
Unpacking libsqlite3-0:armhf (3.8.7-1) ...
Selecting previously unselected package libavahi-common-data:armhf.
Preparing to unpack .../libavahi-common-data_0.6.31-4+b1_armhf.deb ...
Unpacking libavahi-common-data:armhf (0.6.31-4+b1) ...
Selecting previously unselected package libavahi-common3:armhf.
Preparing to unpack .../libavahi-common3_0.6.31-4+b1_armhf.deb ...
Unpacking libavahi-common3:armhf (0.6.31-4+b1) ...
Selecting previously unselected package libdbus-1-3:armhf.
Preparing to unpack .../libdbus-1-3_1.8.8-2_armhf.deb ...
Unpacking libdbus-1-3:armhf (1.8.8-2) ...
Selecting previously unselected package libavahi-client3:armhf.
Preparing to unpack .../libavahi-client3_0.6.31-4+b1_armhf.deb ...
Unpacking libavahi-client3:armhf (0.6.31-4+b1) ...
Selecting previously unselected package libexpat1:armhf.
Preparing to unpack .../libexpat1_2.1.0-6+b1_armhf.deb ...
Unpacking libexpat1:armhf (2.1.0-6+b1) ...
Selecting previously unselected package libpng12-0:armhf.
Preparing to unpack .../libpng12-0_1.2.50-2+b1_armhf.deb ...
Unpacking libpng12-0:armhf (1.2.50-2+b1) ...
Selecting previously unselected package libfreetype6:armhf.
Preparing to unpack .../libfreetype6_2.5.2-2_armhf.deb ...
Unpacking libfreetype6:armhf (2.5.2-2) ...
Selecting previously unselected package ucf.
Preparing to unpack .../archives/ucf_3.0030_all.deb ...
Moving old data out of the way
Unpacking ucf (3.0030) ...
Selecting previously unselected package fonts-dejavu-core.
Preparing to unpack .../fonts-dejavu-core_2.34-1_all.deb ...
Unpacking fonts-dejavu-core (2.34-1) ...
Selecting previously unselected package fontconfig-config.
Preparing to unpack .../fontconfig-config_2.11.0-6.1_all.deb ...
Unpacking fontconfig-config (2.11.0-6.1) ...
Selecting previously unselected package libfontconfig1:armhf.
Preparing to unpack .../libfontconfig1_2.11.0-6.1_armhf.deb ...
Unpacking libfontconfig1:armhf (2.11.0-6.1) ...
Selecting previously unselected package libpixman-1-0:armhf.
Preparing to unpack .../libpixman-1-0_0.32.6-3_armhf.deb ...
Unpacking libpixman-1-0:armhf (0.32.6-3) ...
Selecting previously unselected package libxau6:armhf.
Preparing to unpack .../libxau6_1%3a1.0.8-1_armhf.deb ...
Unpacking libxau6:armhf (1:1.0.8-1) ...
Selecting previously unselected package libxdmcp6:armhf.
Preparing to unpack .../libxdmcp6_1%3a1.1.1-1_armhf.deb ...
Unpacking libxdmcp6:armhf (1:1.1.1-1) ...
Selecting previously unselected package libxcb1:armhf.
Preparing to unpack .../libxcb1_1.10-3+b1_armhf.deb ...
Unpacking libxcb1:armhf (1.10-3+b1) ...
Selecting previously unselected package libx11-data.
Preparing to unpack .../libx11-data_2%3a1.6.2-3_all.deb ...
Unpacking libx11-data (2:1.6.2-3) ...
Selecting previously unselected package libx11-6:armhf.
Preparing to unpack .../libx11-6_2%3a1.6.2-3_armhf.deb ...
Unpacking libx11-6:armhf (2:1.6.2-3) ...
Selecting previously unselected package libxcb-render0:armhf.
Preparing to unpack .../libxcb-render0_1.10-3+b1_armhf.deb ...
Unpacking libxcb-render0:armhf (1.10-3+b1) ...
Selecting previously unselected package libxcb-shm0:armhf.
Preparing to unpack .../libxcb-shm0_1.10-3+b1_armhf.deb ...
Unpacking libxcb-shm0:armhf (1.10-3+b1) ...
Selecting previously unselected package libxext6:armhf.
Preparing to unpack .../libxext6_2%3a1.3.3-1_armhf.deb ...
Unpacking libxext6:armhf (2:1.3.3-1) ...
Selecting previously unselected package libxrender1:armhf.
Preparing to unpack .../libxrender1_1%3a0.9.8-1+b1_armhf.deb ...
Unpacking libxrender1:armhf (1:0.9.8-1+b1) ...
Selecting previously unselected package libcairo2:armhf.
Preparing to unpack .../libcairo2_1.14.0-2.1_armhf.deb ...
Unpacking libcairo2:armhf (1.14.0-2.1) ...
Selecting previously unselected package libcups2:armhf.
Preparing to unpack .../libcups2_1.7.5-7_armhf.deb ...
Unpacking libcups2:armhf (1.7.5-7) ...
Selecting previously unselected package libcupsimage2:armhf.
Preparing to unpack .../libcupsimage2_1.7.5-7_armhf.deb ...
Unpacking libcupsimage2:armhf (1.7.5-7) ...
Selecting previously unselected package libjpeg62-turbo:armhf.
Preparing to unpack .../libjpeg62-turbo_1%3a1.3.1-10_armhf.deb ...
Unpacking libjpeg62-turbo:armhf (1:1.3.1-10) ...
Selecting previously unselected package libjbig0:armhf.
Preparing to unpack .../libjbig0_2.1-3.1_armhf.deb ...
Unpacking libjbig0:armhf (2.1-3.1) ...
Selecting previously unselected package libtiff5:armhf.
Preparing to unpack .../libtiff5_4.0.3-10+b3_armhf.deb ...
Unpacking libtiff5:armhf (4.0.3-10+b3) ...
Selecting previously unselected package libcupsfilters1:armhf.
Preparing to unpack .../libcupsfilters1_1.0.61-2_armhf.deb ...
Unpacking libcupsfilters1:armhf (1.0.61-2) ...
Selecting previously unselected package libdatrie1:armhf.
Preparing to unpack .../libdatrie1_0.2.8-1_armhf.deb ...
Unpacking libdatrie1:armhf (0.2.8-1) ...
Selecting previously unselected package libgfortran3:armhf.
Preparing to unpack .../libgfortran3_4.9.1-19_armhf.deb ...
Unpacking libgfortran3:armhf (4.9.1-19) ...
Selecting previously unselected package libgraphite2-3:armhf.
Preparing to unpack .../libgraphite2-3_1.2.4-3_armhf.deb ...
Unpacking libgraphite2-3:armhf (1.2.4-3) ...
Selecting previously unselected package libharfbuzz0b:armhf.
Preparing to unpack .../libharfbuzz0b_0.9.35-2_armhf.deb ...
Unpacking libharfbuzz0b:armhf (0.9.35-2) ...
Selecting previously unselected package libicu52:armhf.
Preparing to unpack .../libicu52_52.1-6_armhf.deb ...
Unpacking libicu52:armhf (52.1-6) ...
Selecting previously unselected package libharfbuzz-icu0:armhf.
Preparing to unpack .../libharfbuzz-icu0_0.9.35-2_armhf.deb ...
Unpacking libharfbuzz-icu0:armhf (0.9.35-2) ...
Selecting previously unselected package x11-common.
Preparing to unpack .../x11-common_1%3a7.7+7_all.deb ...
Unpacking x11-common (1:7.7+7) ...
Selecting previously unselected package libice6:armhf.
Preparing to unpack .../libice6_2%3a1.0.9-1_armhf.deb ...
Unpacking libice6:armhf (2:1.0.9-1) ...
Selecting previously unselected package libijs-0.35:armhf.
Preparing to unpack .../libijs-0.35_0.35-10_armhf.deb ...
Unpacking libijs-0.35:armhf (0.35-10) ...
Selecting previously unselected package libjasper1:armhf.
Preparing to unpack .../libjasper1_1.900.1-debian1-2.1+b1_armhf.deb ...
Unpacking libjasper1:armhf (1.900.1-debian1-2.1+b1) ...
Selecting previously unselected package liblcms2-2:armhf.
Preparing to unpack .../liblcms2-2_2.6-3+b3_armhf.deb ...
Unpacking liblcms2-2:armhf (2.6-3+b3) ...
Selecting previously unselected package fontconfig.
Preparing to unpack .../fontconfig_2.11.0-6.1_armhf.deb ...
Unpacking fontconfig (2.11.0-6.1) ...
Selecting previously unselected package libthai-data.
Preparing to unpack .../libthai-data_0.1.21-1_all.deb ...
Unpacking libthai-data (0.1.21-1) ...
Selecting previously unselected package libthai0:armhf.
Preparing to unpack .../libthai0_0.1.21-1_armhf.deb ...
Unpacking libthai0:armhf (0.1.21-1) ...
Selecting previously unselected package libpango-1.0-0:armhf.
Preparing to unpack .../libpango-1.0-0_1.36.8-2_armhf.deb ...
Unpacking libpango-1.0-0:armhf (1.36.8-2) ...
Selecting previously unselected package libpangoft2-1.0-0:armhf.
Preparing to unpack .../libpangoft2-1.0-0_1.36.8-2_armhf.deb ...
Unpacking libpangoft2-1.0-0:armhf (1.36.8-2) ...
Selecting previously unselected package libpangocairo-1.0-0:armhf.
Preparing to unpack .../libpangocairo-1.0-0_1.36.8-2_armhf.deb ...
Unpacking libpangocairo-1.0-0:armhf (1.36.8-2) ...
Selecting previously unselected package libpaper1:armhf.
Preparing to unpack .../libpaper1_1.1.24+nmu3_armhf.deb ...
Unpacking libpaper1:armhf (1.1.24+nmu3) ...
Selecting previously unselected package libopenjpeg5:armhf.
Preparing to unpack .../libopenjpeg5_1%3a1.5.2-3_armhf.deb ...
Unpacking libopenjpeg5:armhf (1:1.5.2-3) ...
Selecting previously unselected package libpoppler46:armhf.
Preparing to unpack .../libpoppler46_0.26.5-2_armhf.deb ...
Unpacking libpoppler46:armhf (0.26.5-2) ...
Selecting previously unselected package libsm6:armhf.
Preparing to unpack .../libsm6_2%3a1.2.2-1_armhf.deb ...
Unpacking libsm6:armhf (2:1.2.2-1) ...
Selecting previously unselected package libtcl8.5:armhf.
Preparing to unpack .../libtcl8.5_8.5.17-1_armhf.deb ...
Unpacking libtcl8.5:armhf (8.5.17-1) ...
Selecting previously unselected package libxft2:armhf.
Preparing to unpack .../libxft2_2.3.2-1_armhf.deb ...
Unpacking libxft2:armhf (2.3.2-1) ...
Selecting previously unselected package libxss1:armhf.
Preparing to unpack .../libxss1_1%3a1.2.2-1_armhf.deb ...
Unpacking libxss1:armhf (1:1.2.2-1) ...
Selecting previously unselected package libtk8.5:armhf.
Preparing to unpack .../libtk8.5_8.5.17-1_armhf.deb ...
Unpacking libtk8.5:armhf (8.5.17-1) ...
Selecting previously unselected package libxt6:armhf.
Preparing to unpack .../libxt6_1%3a1.1.4-1_armhf.deb ...
Unpacking libxt6:armhf (1:1.1.4-1) ...
Selecting previously unselected package libxmu6:armhf.
Preparing to unpack .../libxmu6_2%3a1.1.2-1_armhf.deb ...
Unpacking libxmu6:armhf (2:1.1.2-1) ...
Selecting previously unselected package libxpm4:armhf.
Preparing to unpack .../libxpm4_1%3a3.5.11-1_armhf.deb ...
Unpacking libxpm4:armhf (1:3.5.11-1) ...
Selecting previously unselected package libxaw7:armhf.
Preparing to unpack .../libxaw7_2%3a1.0.12-2_armhf.deb ...
Unpacking libxaw7:armhf (2:1.0.12-2) ...
Selecting previously unselected package libxi6:armhf.
Preparing to unpack .../libxi6_2%3a1.7.4-1+b1_armhf.deb ...
Unpacking libxi6:armhf (2:1.7.4-1+b1) ...
Selecting previously unselected package libzzip-0-13:armhf.
Preparing to unpack .../libzzip-0-13_0.13.62-3_armhf.deb ...
Unpacking libzzip-0-13:armhf (0.13.62-3) ...
Selecting previously unselected package poppler-data.
Preparing to unpack .../poppler-data_0.4.7-1_all.deb ...
Unpacking poppler-data (0.4.7-1) ...
Selecting previously unselected package libpython2.7-minimal:armhf.
Preparing to unpack .../libpython2.7-minimal_2.7.8-11_armhf.deb ...
Unpacking libpython2.7-minimal:armhf (2.7.8-11) ...
Selecting previously unselected package python2.7-minimal.
Preparing to unpack .../python2.7-minimal_2.7.8-11_armhf.deb ...
Unpacking python2.7-minimal (2.7.8-11) ...
Selecting previously unselected package mime-support.
Preparing to unpack .../mime-support_3.57_all.deb ...
Unpacking mime-support (3.57) ...
Selecting previously unselected package libpython2.7-stdlib:armhf.
Preparing to unpack .../libpython2.7-stdlib_2.7.8-11_armhf.deb ...
Unpacking libpython2.7-stdlib:armhf (2.7.8-11) ...
Selecting previously unselected package python2.7.
Preparing to unpack .../python2.7_2.7.8-11_armhf.deb ...
Unpacking python2.7 (2.7.8-11) ...
Selecting previously unselected package python-minimal.
Preparing to unpack .../python-minimal_2.7.8-2_armhf.deb ...
Unpacking python-minimal (2.7.8-2) ...
Selecting previously unselected package libpython-stdlib:armhf.
Preparing to unpack .../libpython-stdlib_2.7.8-2_armhf.deb ...
Unpacking libpython-stdlib:armhf (2.7.8-2) ...
Selecting previously unselected package python.
Preparing to unpack .../python_2.7.8-2_armhf.deb ...
Unpacking python (2.7.8-2) ...
Selecting previously unselected package libblas-common.
Preparing to unpack .../libblas-common_1.2.20110419-10_armhf.deb ...
Unpacking libblas-common (1.2.20110419-10) ...
Selecting previously unselected package libblas3.
Preparing to unpack .../libblas3_1.2.20110419-10_armhf.deb ...
Unpacking libblas3 (1.2.20110419-10) ...
Selecting previously unselected package libjbig2dec0.
Preparing to unpack .../libjbig2dec0_0.11+20120125-1_armhf.deb ...
Unpacking libjbig2dec0 (0.11+20120125-1) ...
Selecting previously unselected package libgs9-common.
Preparing to unpack .../libgs9-common_9.06~dfsg-1.1_all.deb ...
Unpacking libgs9-common (9.06~dfsg-1.1) ...
Selecting previously unselected package libgs9.
Preparing to unpack .../libgs9_9.06~dfsg-1.1_armhf.deb ...
Unpacking libgs9 (9.06~dfsg-1.1) ...
Selecting previously unselected package libkpathsea6.
Preparing to unpack .../libkpathsea6_2014.20140926.35254-2_armhf.deb ...
Unpacking libkpathsea6 (2014.20140926.35254-2) ...
Selecting previously unselected package liblapack3.
Preparing to unpack .../liblapack3_3.5.0-4_armhf.deb ...
Unpacking liblapack3 (3.5.0-4) ...
Selecting previously unselected package libpaper-utils.
Preparing to unpack .../libpaper-utils_1.1.24+nmu3_armhf.deb ...
Unpacking libpaper-utils (1.1.24+nmu3) ...
Selecting previously unselected package libpotrace0.
Preparing to unpack .../libpotrace0_1.11-2_armhf.deb ...
Unpacking libpotrace0 (1.11-2) ...
Selecting previously unselected package libptexenc1.
Preparing to unpack .../libptexenc1_2014.20140926.35254-2_armhf.deb ...
Unpacking libptexenc1 (2014.20140926.35254-2) ...
Selecting previously unselected package libsynctex1.
Preparing to unpack .../libsynctex1_2014.20140926.35254-2_armhf.deb ...
Unpacking libsynctex1 (2014.20140926.35254-2) ...
Selecting previously unselected package zip.
Preparing to unpack .../archives/zip_3.0-8_armhf.deb ...
Unpacking zip (3.0-8) ...
Selecting previously unselected package unzip.
Preparing to unpack .../unzip_6.0-12_armhf.deb ...
Unpacking unzip (6.0-12) ...
Selecting previously unselected package xdg-utils.
Preparing to unpack .../xdg-utils_1.1.0~rc1+git20111210-7.1_all.deb ...
Unpacking xdg-utils (1.1.0~rc1+git20111210-7.1) ...
Selecting previously unselected package r-base-core.
Preparing to unpack .../r-base-core_3.1.1-1+b2_armhf.deb ...
Unpacking r-base-core (3.1.1-1+b2) ...
Selecting previously unselected package littler.
Preparing to unpack .../littler_0.2.1-1_armhf.deb ...
Unpacking littler (0.2.1-1) ...
Selecting previously unselected package tex-common.
Preparing to unpack .../tex-common_5.03_all.deb ...
Unpacking tex-common (5.03) ...
Selecting previously unselected package preview-latex-style.
Preparing to unpack .../preview-latex-style_11.87-2_all.deb ...
Unpacking preview-latex-style (11.87-2) ...
Selecting previously unselected package python-decorator.
Preparing to unpack .../python-decorator_3.4.0-2_all.deb ...
Unpacking python-decorator (3.4.0-2) ...
Selecting previously unselected package python-pkg-resources.
Preparing to unpack .../python-pkg-resources_5.5.1-1_all.deb ...
Unpacking python-pkg-resources (5.5.1-1) ...
Selecting previously unselected package python-nose.
Preparing to unpack .../python-nose_1.3.4-1_all.deb ...
Unpacking python-nose (1.3.4-1) ...
Selecting previously unselected package python-numpy.
Preparing to unpack .../python-numpy_1%3a1.8.2-2_armhf.deb ...
Unpacking python-numpy (1:1.8.2-2) ...
Selecting previously unselected package python-pygments.
Preparing to unpack .../python-pygments_2.0~rc1.a2bc2bd+dfsg-1_all.deb ...
Unpacking python-pygments (2.0~rc1.a2bc2bd+dfsg-1) ...
Selecting previously unselected package r-cran-mass.
Preparing to unpack .../r-cran-mass_7.3-34-1_armhf.deb ...
Unpacking r-cran-mass (7.3-34-1) ...
Selecting previously unselected package r-cran-timedate.
Preparing to unpack .../r-cran-timedate_3010.98-1_armhf.deb ...
Unpacking r-cran-timedate (3010.98-1) ...
Selecting previously unselected package r-cran-timeseries.
Preparing to unpack .../r-cran-timeseries_3010.97-1_armhf.deb ...
Unpacking r-cran-timeseries (3010.97-1) ...
Selecting previously unselected package r-cran-stabledist.
Preparing to unpack .../r-cran-stabledist_0.6-6-1_all.deb ...
Unpacking r-cran-stabledist (0.6-6-1) ...
Selecting previously unselected package r-cran-fbasics.
Preparing to unpack .../r-cran-fbasics_3010.86-1_armhf.deb ...
Unpacking r-cran-fbasics (3010.86-1) ...
Selecting previously unselected package r-cran-foptions.
Preparing to unpack .../r-cran-foptions_3010.83-1_armhf.deb ...
Unpacking r-cran-foptions (3010.83-1) ...
Selecting previously unselected package r-cran-survival.
Preparing to unpack .../r-cran-survival_2.37-7-1_armhf.deb ...
Unpacking r-cran-survival (2.37-7-1) ...
Selecting previously unselected package r-cran-lattice.
Preparing to unpack .../r-cran-lattice_0.20-29-1_armhf.deb ...
Unpacking r-cran-lattice (0.20-29-1) ...
Selecting previously unselected package r-cran-gbm.
Preparing to unpack .../r-cran-gbm_2.1-1_armhf.deb ...
Unpacking r-cran-gbm (2.1-1) ...
Selecting previously unselected package r-cran-inline.
Preparing to unpack .../r-cran-inline_0.3.13-1_all.deb ...
Unpacking r-cran-inline (0.3.13-1) ...
Selecting previously unselected package r-cran-lhs.
Preparing to unpack .../r-cran-lhs_0.10-1_armhf.deb ...
Unpacking r-cran-lhs (0.10-1) ...
Selecting previously unselected package r-cran-rjson.
Preparing to unpack .../r-cran-rjson_0.2.14-1_armhf.deb ...
Unpacking r-cran-rjson (0.2.14-1) ...
Selecting previously unselected package r-cran-rpart.
Preparing to unpack .../r-cran-rpart_4.1-8-1_armhf.deb ...
Unpacking r-cran-rpart (4.1-8-1) ...
Selecting previously unselected package r-cran-tgp.
Preparing to unpack .../r-cran-tgp_2.4-9-1_armhf.deb ...
Unpacking r-cran-tgp (2.4-9-1) ...
Selecting previously unselected package texlive-binaries.
Preparing to unpack .../texlive-binaries_2014.20140926.35254-2_armhf.deb ...
Unpacking texlive-binaries (2014.20140926.35254-2) ...
Selecting previously unselected package texlive-base.
Preparing to unpack .../texlive-base_2014.20141024-1_all.deb ...
Unpacking texlive-base (2014.20141024-1) ...
Selecting previously unselected package texlive-latex-base.
Preparing to unpack .../texlive-latex-base_2014.20141024-1_all.deb ...
Unpacking texlive-latex-base (2014.20141024-1) ...
Selecting previously unselected package texlive-latex-recommended.
Preparing to unpack .../texlive-latex-recommended_2014.20141024-1_all.deb ...
Unpacking texlive-latex-recommended (2014.20141024-1) ...
Selecting previously unselected package texlive-pictures.
Preparing to unpack .../texlive-pictures_2014.20141024-1_all.deb ...
Unpacking texlive-pictures (2014.20141024-1) ...
Selecting previously unselected package texlive-latex-extra.
Preparing to unpack .../texlive-latex-extra_2014.20141024-1_all.deb ...
Unpacking texlive-latex-extra (2014.20141024-1) ...
Selecting previously unselected package python-scipy.
Preparing to unpack .../python-scipy_0.14.0-2_armhf.deb ...
Unpacking python-scipy (0.14.0-2) ...
Selecting previously unselected package sbuild-build-depends-ask-dummy.
Preparing to unpack .../sbuild-build-depends-ask-dummy.deb ...
Unpacking sbuild-build-depends-ask-dummy (0.invalid.0) ...
Processing triggers for man-db (2.7.0.2-3) ...
Not building database; man-db/auto-update is not 'true'.
Setting up libncursesw5:armhf (5.9+20140913-1) ...
Setting up libssl1.0.0:armhf (1.0.1j-1) ...
Setting up libnettle4:armhf (2.7.1-3) ...
Setting up libhogweed2:armhf (2.7.1-3) ...
Setting up libp11-kit0:armhf (0.20.7-1) ...
Setting up libtasn1-6:armhf (4.2-2) ...
Setting up libgnutls-deb0-28:armhf (3.3.8-3) ...
Setting up libkeyutils1:armhf (1.5.9-5) ...
Setting up libkrb5support0:armhf (1.12.1+dfsg-11) ...
Setting up libk5crypto3:armhf (1.12.1+dfsg-11) ...
Setting up libkrb5-3:armhf (1.12.1+dfsg-11) ...
Setting up libgssapi-krb5-2:armhf (1.12.1+dfsg-11) ...
Setting up libidn11:armhf (1.29-1) ...
Setting up libsqlite3-0:armhf (3.8.7-1) ...
Setting up libavahi-common-data:armhf (0.6.31-4+b1) ...
Setting up libavahi-common3:armhf (0.6.31-4+b1) ...
Setting up libdbus-1-3:armhf (1.8.8-2) ...
Setting up libavahi-client3:armhf (0.6.31-4+b1) ...
Setting up libexpat1:armhf (2.1.0-6+b1) ...
Setting up libpng12-0:armhf (1.2.50-2+b1) ...
Setting up libfreetype6:armhf (2.5.2-2) ...
Setting up ucf (3.0030) ...
Setting up fonts-dejavu-core (2.34-1) ...
Setting up fontconfig-config (2.11.0-6.1) ...
Setting up libfontconfig1:armhf (2.11.0-6.1) ...
Setting up libpixman-1-0:armhf (0.32.6-3) ...
Setting up libxau6:armhf (1:1.0.8-1) ...
Setting up libxdmcp6:armhf (1:1.1.1-1) ...
Setting up libxcb1:armhf (1.10-3+b1) ...
Setting up libx11-data (2:1.6.2-3) ...
Setting up libx11-6:armhf (2:1.6.2-3) ...
Setting up libxcb-render0:armhf (1.10-3+b1) ...
Setting up libxcb-shm0:armhf (1.10-3+b1) ...
Setting up libxext6:armhf (2:1.3.3-1) ...
Setting up libxrender1:armhf (1:0.9.8-1+b1) ...
Setting up libcairo2:armhf (1.14.0-2.1) ...
Setting up libcups2:armhf (1.7.5-7) ...
Setting up libjpeg62-turbo:armhf (1:1.3.1-10) ...
Setting up libjbig0:armhf (2.1-3.1) ...
Setting up libtiff5:armhf (4.0.3-10+b3) ...
Setting up libdatrie1:armhf (0.2.8-1) ...
Setting up libgfortran3:armhf (4.9.1-19) ...
Setting up libgraphite2-3:armhf (1.2.4-3) ...
Setting up libharfbuzz0b:armhf (0.9.35-2) ...
Setting up libicu52:armhf (52.1-6) ...
Setting up libharfbuzz-icu0:armhf (0.9.35-2) ...
Setting up x11-common (1:7.7+7) ...
update-rc.d: warning: start and stop actions are no longer supported; falling 
back to defaults
All runlevel operations denied by policy
invoke-rc.d: policy-rc.d denied execution of start.
Setting up libice6:armhf (2:1.0.9-1) ...
Setting up libijs-0.35:armhf (0.35-10) ...
Setting up libjasper1:armhf (1.900.1-debian1-2.1+b1) ...
Setting up liblcms2-2:armhf (2.6-3+b3) ...
Setting up fontconfig (2.11.0-6.1) ...
Regenerating fonts cache... done.
Setting up libthai-data (0.1.21-1) ...
Setting up libthai0:armhf (0.1.21-1) ...
Setting up libpango-1.0-0:armhf (1.36.8-2) ...
Setting up libpangoft2-1.0-0:armhf (1.36.8-2) ...
Setting up libpangocairo-1.0-0:armhf (1.36.8-2) ...
Setting up libpaper1:armhf (1.1.24+nmu3) ...

Creating config file /etc/papersize with new version
Setting up libopenjpeg5:armhf (1:1.5.2-3) ...
Setting up libpoppler46:armhf (0.26.5-2) ...
Setting up libsm6:armhf (2:1.2.2-1) ...
Setting up libtcl8.5:armhf (8.5.17-1) ...
Setting up libxft2:armhf (2.3.2-1) ...
Setting up libxss1:armhf (1:1.2.2-1) ...
Setting up libtk8.5:armhf (8.5.17-1) ...
Setting up libxt6:armhf (1:1.1.4-1) ...
Setting up libxmu6:armhf (2:1.1.2-1) ...
Setting up libxpm4:armhf (1:3.5.11-1) ...
Setting up libxaw7:armhf (2:1.0.12-2) ...
Setting up libxi6:armhf (2:1.7.4-1+b1) ...
Setting up libzzip-0-13:armhf (0.13.62-3) ...
Setting up poppler-data (0.4.7-1) ...
Setting up libpython2.7-minimal:armhf (2.7.8-11) ...
Setting up python2.7-minimal (2.7.8-11) ...
Setting up mime-support (3.57) ...
Setting up libpython2.7-stdlib:armhf (2.7.8-11) ...
Setting up python2.7 (2.7.8-11) ...
Setting up python-minimal (2.7.8-2) ...
Setting up libpython-stdlib:armhf (2.7.8-2) ...
Setting up python (2.7.8-2) ...
Setting up libblas-common (1.2.20110419-10) ...
Setting up libblas3 (1.2.20110419-10) ...
update-alternatives: using /usr/lib/libblas/libblas.so.3 to provide 
/usr/lib/libblas.so.3 (libblas.so.3) in auto mode
Setting up libjbig2dec0 (0.11+20120125-1) ...
Setting up libgs9-common (9.06~dfsg-1.1) ...
Setting up libkpathsea6 (2014.20140926.35254-2) ...
Setting up liblapack3 (3.5.0-4) ...
update-alternatives: using /usr/lib/lapack/liblapack.so.3 to provide 
/usr/lib/liblapack.so.3 (liblapack.so.3) in auto mode
Setting up libpaper-utils (1.1.24+nmu3) ...
Setting up libpotrace0 (1.11-2) ...
Setting up libptexenc1 (2014.20140926.35254-2) ...
Setting up libsynctex1 (2014.20140926.35254-2) ...
Setting up zip (3.0-8) ...
Setting up unzip (6.0-12) ...
Setting up xdg-utils (1.1.0~rc1+git20111210-7.1) ...
Setting up r-base-core (3.1.1-1+b2) ...

Creating config file /etc/R/Renviron with new version
Setting up littler (0.2.1-1) ...
Setting up tex-common (5.03) ...
Setting up preview-latex-style (11.87-2) ...
Setting up python-decorator (3.4.0-2) ...
Setting up python-pkg-resources (5.5.1-1) ...
Setting up python-nose (1.3.4-1) ...
Setting up python-numpy (1:1.8.2-2) ...
Setting up python-pygments (2.0~rc1.a2bc2bd+dfsg-1) ...
Setting up r-cran-mass (7.3-34-1) ...
Setting up r-cran-timedate (3010.98-1) ...
Setting up r-cran-timeseries (3010.97-1) ...
Setting up r-cran-stabledist (0.6-6-1) ...
Setting up r-cran-fbasics (3010.86-1) ...
Setting up r-cran-foptions (3010.83-1) ...
Setting up r-cran-survival (2.37-7-1) ...
Setting up r-cran-lattice (0.20-29-1) ...
Setting up r-cran-gbm (2.1-1) ...
Setting up r-cran-inline (0.3.13-1) ...
Setting up r-cran-lhs (0.10-1) ...
Setting up r-cran-rjson (0.2.14-1) ...
Setting up r-cran-rpart (4.1-8-1) ...
Setting up r-cran-tgp (2.4-9-1) ...
Setting up python-scipy (0.14.0-2) ...
Setting up libcupsimage2:armhf (1.7.5-7) ...
Setting up libcupsfilters1:armhf (1.0.61-2) ...
Setting up libgs9 (9.06~dfsg-1.1) ...
Setting up texlive-binaries (2014.20140926.35254-2) ...
update-alternatives: using /usr/bin/xdvi-xaw to provide /usr/bin/xdvi.bin 
(xdvi.bin) in auto mode
update-alternatives: using /usr/bin/bibtex.original to provide /usr/bin/bibtex 
(bibtex) in auto mode
Building format(s) --refresh.
        This may take some time... done.
Setting up texlive-base (2014.20141024-1) ...
/usr/bin/tl-paper: setting paper size for dvips to a4.
/usr/bin/tl-paper: setting paper size for dvipdfmx to a4.
/usr/bin/tl-paper: setting paper size for xdvi to a4.
/usr/bin/tl-paper: setting paper size for pdftex to a4.
Running mktexlsr. This may take some time... done.
Building format(s) --all.
        This may take some time... done.
Processing triggers for tex-common (5.03) ...
Running updmap-sys. This may take some time... done.
Running mktexlsr /var/lib/texmf ... done.
Setting up texlive-latex-base (2014.20141024-1) ...
Running mktexlsr. This may take some time... done.
Building format(s) --all --cnffile /etc/texmf/fmt.d/10texlive-latex-base.cnf.
        This may take some time... done.
Processing triggers for tex-common (5.03) ...
Running updmap-sys. This may take some time... done.
Running mktexlsr /var/lib/texmf ... done.
Setting up texlive-latex-recommended (2014.20141024-1) ...
Processing triggers for tex-common (5.03) ...
Running mktexlsr. This may take some time... done.
Setting up texlive-pictures (2014.20141024-1) ...
Processing triggers for tex-common (5.03) ...
Running mktexlsr. This may take some time... done.
Running updmap-sys. This may take some time... done.
Running mktexlsr /var/lib/texmf ... done.
Setting up texlive-latex-extra (2014.20141024-1) ...
Processing triggers for tex-common (5.03) ...
Running mktexlsr. This may take some time... done.
Running updmap-sys. This may take some time... done.
Running mktexlsr /var/lib/texmf ... done.
Setting up sbuild-build-depends-ask-dummy (0.invalid.0) ...
Processing triggers for libc-bin (2.19-12) ...

┌──────────────────────────────────────────────────────────────────────────────┐
│ Build environment                                                            │
└──────────────────────────────────────────────────────────────────────────────┘

Kernel: Linux 3.8.13.28 armhf (armv7l)
Toolchain package versions: binutils_2.24.90.20141023-1 dpkg-dev_1.17.21 
g++-4.9_4.9.1-19 gcc-4.9_4.9.1-19 libc6-dev_2.19-12 libstdc++-4.9-dev_4.9.1-19 
libstdc++6_4.9.1-19 linux-libc-dev_3.16.5-1
Package versions: apt_1.0.9.3 base-files_7.10 base-passwd_3.5.36 bash_4.3-11 
binutils_2.24.90.20141023-1 bsdmainutils_9.0.6 bsdutils_1:2.25.2-2 
build-essential_11.7 bzip2_1.0.6-7+b1 coreutils_8.23-3 cpp_4:4.9.1-5 
cpp-4.9_4.9.1-19 dash_0.5.7-4+b1 debconf_1.5.53 debconf-i18n_1.5.53 
debfoster_2.7-2 debhelper_9.20141022 debian-archive-keyring_2014.1 
debianutils_4.4+b1 diffutils_1:3.3-1+b1 dpkg_1.17.21 dpkg-dev_1.17.21 
e2fslibs_1.42.12-1 e2fsprogs_1.42.12-1 eatmydata_82-2 fakeroot_1.20.2-1 
file_1:5.20-1 findutils_4.4.2-9+b1 fontconfig_2.11.0-6.1 
fontconfig-config_2.11.0-6.1 fonts-dejavu-core_2.34-1 g++_4:4.9.1-5 
g++-4.9_4.9.1-19 gcc_4:4.9.1-5 gcc-4.9_4.9.1-19 gcc-4.9-base_4.9.1-19 
gettext_0.19.3-1 gettext-base_0.19.3-1 gnupg_1.4.18-4 gpgv_1.4.18-4 grep_2.20-4 
groff-base_1.22.2-8 gzip_1.6-4 hostname_3.15 init_1.21 init-system-helpers_1.21 
initscripts_2.88dsf-57 insserv_1.14.0-5 intltool-debian_0.35.0+20060710.1 
libacl1_2.2.52-2 libapt-pkg4.12_1.0.9.3 libasan1_4.9.1-19 libasprintf0c2_0.19.3
 -1 libatomic1_4.9.1-19 libattr1_1:2.4.47-2 libaudit-common_1:2.4-1 
libaudit1_1:2.4-1 libavahi-client3_0.6.31-4+b1 libavahi-common-data_0.6.31-4+b1 
libavahi-common3_0.6.31-4+b1 libblas-common_1.2.20110419-10 
libblas3_1.2.20110419-10 libblkid1_2.25.2-2 libbz2-1.0_1.0.6-7+b1 
libc-bin_2.19-12 libc-dev-bin_2.19-12 libc6_2.19-12 libc6-dev_2.19-12 
libcairo2_1.14.0-2.1 libcap2_1:2.24-6 libcloog-isl4_0.18.2-1 
libcomerr2_1.42.12-1 libcroco3_0.6.8-3 libcups2_1.7.5-7 
libcupsfilters1_1.0.61-2 libcupsimage2_1.7.5-7 libdatrie1_0.2.8-1 
libdb5.3_5.3.28-6 libdbus-1-3_1.8.8-2 libdebconfclient0_0.192 
libdpkg-perl_1.17.21 libeatmydata1_82-2 libexpat1_2.1.0-6+b1 
libfakeroot_1.20.2-1 libffi6_3.1-2 libfontconfig1_2.11.0-6.1 
libfreetype6_2.5.2-2 libgc1c2_1:7.2d-6.4 libgcc-4.9-dev_4.9.1-19 
libgcc1_1:4.9.1-19 libgcrypt20_1.6.2-4 libgdbm3_1.8.3-13+b1 
libgfortran3_4.9.1-19 libglib2.0-0_2.42.0-2 libgmp10_2:6.0.0+dfsg-6 
libgnutls-deb0-28_3.3.8-3 libgomp1_4.9.1-19 libgpg-error0_1.17-2 
libgraphite2-3_1.2.4-3 libgs9
 _9.06~dfsg-1.1 libgs9-common_9.06~dfsg-1.1 libgssapi-krb5-2_1.12.1+dfsg-11 
libharfbuzz-icu0_0.9.35-2 libharfbuzz0b_0.9.35-2 libhogweed2_2.7.1-3 
libice6_2:1.0.9-1 libicu52_52.1-6 libidn11_1.29-1 libijs-0.35_0.35-10 
libisl10_0.12.2-2 libjasper1_1.900.1-debian1-2.1+b1 libjbig0_2.1-3.1 
libjbig2dec0_0.11+20120125-1 libjpeg62-turbo_1:1.3.1-10 
libk5crypto3_1.12.1+dfsg-11 libkeyutils1_1.5.9-5 
libkpathsea6_2014.20140926.35254-2 libkrb5-3_1.12.1+dfsg-11 
libkrb5support0_1.12.1+dfsg-11 liblapack3_3.5.0-4 liblcms2-2_2.6-3+b3 
liblocale-gettext-perl_1.05-8+b1 liblzma5_5.1.1alpha+20120614-2 
libmagic1_1:5.20-1 libmount1_2.25.2-2 libmpc3_1.0.2-1 libmpfr4_3.1.2-1 
libncurses5_5.9+20140913-1 libncursesw5_5.9+20140913-1 libnettle4_2.7.1-3 
libopenjpeg5_1:1.5.2-3 libp11-kit0_0.20.7-1 libpam-modules_1.1.8-3.1 
libpam-modules-bin_1.1.8-3.1 libpam-runtime_1.1.8-3.1 libpam0g_1.1.8-3.1 
libpango-1.0-0_1.36.8-2 libpangocairo-1.0-0_1.36.8-2 libpangoft2-1.0-0_1.36.8-2 
libpaper-utils_1.1.24+nmu3 libpaper1_1.1.24+nmu3
  libpcre3_1:8.35-3.1 libpipeline1_1.4.0-1 libpixman-1-0_0.32.6-3 
libpng12-0_1.2.50-2+b1 libpoppler46_0.26.5-2 libpotrace0_1.11-2 
libptexenc1_2014.20140926.35254-2 libpython-stdlib_2.7.8-2 
libpython2.7-minimal_2.7.8-11 libpython2.7-stdlib_2.7.8-11 
libreadline6_6.3-8+b1 libselinux1_2.3-2 libsemanage-common_2.3-1 
libsemanage1_2.3-1 libsepol1_2.3-2 libslang2_2.3.0-2 libsm6_2:1.2.2-1 
libsmartcols1_2.25.2-2 libsqlite3-0_3.8.7-1 libss2_1.42.12-1 
libssl1.0.0_1.0.1j-1 libstdc++-4.9-dev_4.9.1-19 libstdc++6_4.9.1-19 
libsynctex1_2014.20140926.35254-2 libsystemd0_215-5+b1 libtasn1-6_4.2-2 
libtcl8.5_8.5.17-1 libtext-charwidth-perl_0.04-7+b4 libtext-iconv-perl_1.7-5+b2 
libtext-wrapi18n-perl_0.06-7 libthai-data_0.1.21-1 libthai0_0.1.21-1 
libtiff5_4.0.3-10+b3 libtimedate-perl_2.3000-2 libtinfo5_5.9+20140913-1 
libtk8.5_8.5.17-1 libubsan0_4.9.1-19 libunistring0_0.9.3-5.2 
libusb-0.1-4_2:0.1.12-25 libustr-1.0-1_1.0.4-3 libuuid1_2.25.2-2 
libx11-6_2:1.6.2-3 libx11-data_2:1.6.2-3 libxau6_1:1.0.8-1 libxaw7_
 2:1.0.12-2 libxcb-render0_1.10-3+b1 libxcb-shm0_1.10-3+b1 libxcb1_1.10-3+b1 
libxdmcp6_1:1.1.1-1 libxext6_2:1.3.3-1 libxft2_2.3.2-1 libxi6_2:1.7.4-1+b1 
libxml2_2.9.1+dfsg1-4 libxmu6_2:1.1.2-1 libxpm4_1:3.5.11-1 
libxrender1_1:0.9.8-1+b1 libxss1_1:1.2.2-1 libxt6_1:1.1.4-1 
libzzip-0-13_0.13.62-3 linux-libc-dev_3.16.5-1 littler_0.2.1-1 login_1:4.2-2+b1 
lsb-base_4.1+Debian13+nmu1 make_4.0-8 man-db_2.7.0.2-3 mawk_1.3.3-17 
mime-support_3.57 mount_2.25.2-2 multiarch-support_2.19-12 
ncurses-base_5.9+20140913-1 ncurses-bin_5.9+20140913-1 passwd_1:4.2-2+b1 
patch_2.7.1-6 perl_5.20.1-2 perl-base_5.20.1-2 perl-modules_5.20.1-2 
po-debconf_1.0.16+nmu3 poppler-data_0.4.7-1 preview-latex-style_11.87-2 
python_2.7.8-2 python-decorator_3.4.0-2 python-minimal_2.7.8-2 
python-nose_1.3.4-1 python-numpy_1:1.8.2-2 python-pkg-resources_5.5.1-1 
python-pygments_2.0~rc1.a2bc2bd+dfsg-1 python-scipy_0.14.0-2 python2.7_2.7.8-11 
python2.7-minimal_2.7.8-11 r-base-core_3.1.1-1+b2 r-cran-fbasics_3010.86-1 
r-cran-foptions
 _3010.83-1 r-cran-gbm_2.1-1 r-cran-inline_0.3.13-1 r-cran-lattice_0.20-29-1 
r-cran-lhs_0.10-1 r-cran-mass_7.3-34-1 r-cran-rjson_0.2.14-1 
r-cran-rpart_4.1-8-1 r-cran-stabledist_0.6-6-1 r-cran-survival_2.37-7-1 
r-cran-tgp_2.4-9-1 r-cran-timedate_3010.98-1 r-cran-timeseries_3010.97-1 
readline-common_6.3-8 sbuild-build-depends-ask-dummy_0.invalid.0 
sbuild-build-depends-core-dummy_0.invalid.0 sed_4.2.2-4 sensible-utils_0.0.9 
startpar_0.59-3 sysv-rc_2.88dsf-57 sysvinit-core_2.88dsf-57 
sysvinit-utils_2.88dsf-57 tar_1.27.1-2 tex-common_5.03 
texlive-base_2014.20141024-1 texlive-binaries_2014.20140926.35254-2 
texlive-latex-base_2014.20141024-1 texlive-latex-extra_2014.20141024-1 
texlive-latex-recommended_2014.20141024-1 texlive-pictures_2014.20141024-1 
tzdata_2014i-1 ucf_3.0030 unzip_6.0-12 util-linux_2.25.2-2 x11-common_1:7.7+7 
xdg-utils_1.1.0~rc1+git20111210-7.1 xz-utils_5.1.1alpha+20120614-2 zip_3.0-8 
zlib1g_1:1.2.8.dfsg-2

┌──────────────────────────────────────────────────────────────────────────────┐
│ Build                                                                        │
└──────────────────────────────────────────────────────────────────────────────┘


Unpack source
─────────────

gpgv: keyblock resource `/sbuild-nonexistent/.gnupg/trustedkeys.gpg': file open 
error
gpgv: Signature made Mon Sep  2 08:42:06 2013 UTC using DSA key ID DD899610
gpgv: Can't check signature: public key not found
dpkg-source: warning: failed to verify signature on ./ask_1.0.1-1.dsc
dpkg-source: info: extracting ask in ask-1.0.1
dpkg-source: info: unpacking ask_1.0.1.orig.tar.gz
dpkg-source: info: unpacking ask_1.0.1-1.debian.tar.gz
dpkg-source: info: applying fallback-to-rjson.diff

Check disc space
────────────────

Sufficient free space for build

User Environment
────────────────

DEB_BUILD_MULTIARCH=arm-linux-gnueabihf
DEB_BUILD_OPTIONS=parallel=3
HOME=/sbuild-nonexistent
LD_PRELOAD=/usr/lib/arm-linux-gnueabihf/libeatmydata.so
LOGNAME=kilobyte
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PWD=/«PKGBUILDDIR»
SCHROOT_ALIAS_NAME=jessie-armhf-sbuild
SCHROOT_CHROOT_NAME=jessie-armhf-sbuild
SCHROOT_COMMAND=env
SCHROOT_GID=1000
SCHROOT_GROUP=kilobyte
SCHROOT_SESSION_ID=jessie-armhf-sbuild-8e26efd3-9e8c-4ece-b34a-40926f2d2e8b
SCHROOT_UID=1000
SCHROOT_USER=kilobyte
SHELL=/bin/sh
TERM=KBtin
USER=kilobyte

dpkg-buildpackage
─────────────────

dpkg-buildpackage: source package ask
dpkg-buildpackage: source version 1.0.1-1
dpkg-buildpackage: source distribution unstable
dpkg-buildpackage: source changed by Pablo Oliveira <pa...@sifflez.org>
 dpkg-source --before-build ask-1.0.1
dpkg-buildpackage: host architecture armhf
 fakeroot debian/rules clean
dh clean
   dh_testdir
   dh_auto_clean
make[1]: Entering directory '/«PKGBUILDDIR»'
rm -rf sandbox/ 
make -C doc/ clean
make[2]: Entering directory '/«PKGBUILDDIR»/doc'
rm -rf ask-manual-1.0.1.pdf *.log *.out *.toc *.aux
make[2]: Leaving directory '/«PKGBUILDDIR»/doc'
make[1]: Leaving directory '/«PKGBUILDDIR»'
   dh_clean
 debian/rules build
dh build
   dh_testdir
   dh_auto_build
make[1]: Entering directory '/«PKGBUILDDIR»'
make -C doc/
make[2]: Entering directory '/«PKGBUILDDIR»/doc'
pdflatex -shell-escape ask-manual.tex 
This is pdfTeX, Version 3.14159265-2.6-1.40.15 (TeX Live 2015/dev/Debian) 
(preloaded format=pdflatex)
 \write18 enabled.
entering extended mode
(./ask-manual.tex
LaTeX2e <2014/05/01>
Babel <3.9l> and hyphenation patterns for 2 languages loaded.
(/usr/share/texlive/texmf-dist/tex/latex/base/report.cls
Document Class: report 2007/10/19 v1.4h Standard LaTeX document class
(/usr/share/texlive/texmf-dist/tex/latex/base/size10.clo))
(/usr/share/texlive/texmf-dist/tex/latex/microtype/microtype.sty
(/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty)
(/usr/share/texlive/texmf-dist/tex/latex/microtype/microtype-pdftex.def)
(/usr/share/texlive/texmf-dist/tex/latex/microtype/microtype.cfg))
(/usr/share/texlive/texmf-dist/tex/latex/xcolor/xcolor.sty
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/color.cfg)
(/usr/share/texlive/texmf-dist/tex/latex/pdftex-def/pdftex.def
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/infwarerr.sty)
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ltxcmds.sty)))
(/usr/share/texlive/texmf-dist/tex/latex/minted/minted.sty
(/usr/share/texlive/texmf-dist/tex/latex/fancyvrb/fancyvrb.sty
Style option: `fancyvrb' v2.7a, with DG/SPQR fixes, and firstline=lastline fix 
<2008/02/07> (tvz)) (/usr/share/texlive/texmf-dist/tex/latex/float/float.sty)
(/usr/share/texlive/texmf-dist/tex/latex/base/ifthen.sty)
(/usr/share/texlive/texmf-dist/tex/latex/tools/calc.sty)
(/usr/share/texlive/texmf-dist/tex/latex/ifplatform/ifplatform.sty
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/pdftexcmds.sty
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifluatex.sty)
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifpdf.sty))
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/catchfile.sty
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/etexcmds.sty))
(./ask-manual.w18)))/usr/bin/pygmentize

(/usr/share/texlive/texmf-dist/tex/latex/hyperref/hyperref.sty
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty))
(/usr/share/texlive/texmf-dist/tex/generic/ifxetex/ifxetex.sty)
(/usr/share/texlive/texmf-dist/tex/latex/oberdiek/auxhook.sty)
(/usr/share/texlive/texmf-dist/tex/latex/oberdiek/kvoptions.sty)
(/usr/share/texlive/texmf-dist/tex/latex/hyperref/pd1enc.def)
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/hyperref.cfg)
(/usr/share/texlive/texmf-dist/tex/latex/url/url.sty))

Package hyperref Message: Driver (autodetected): hpdftex.

(/usr/share/texlive/texmf-dist/tex/latex/hyperref/hpdftex.def
(/usr/share/texlive/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty))
(/usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty)
(/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty
(/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty
(/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty)
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/graphics.cfg)))

LaTeX Warning: Unused global option(s):
    [a4].

No file ask-manual.aux.
(/usr/share/texlive/texmf-dist/tex/latex/microtype/mt-cmr.cfg)
(/usr/share/texlive/texmf-dist/tex/context/base/supp-pdf.mkii
[Loading MPS to PDF converter (version 2006.09.02).]
) (./ask-manual.pyg)
(/usr/share/texlive/texmf-dist/tex/latex/hyperref/nameref.sty
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/gettitlestring.sty))
(/usr/share/texlive/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty
(/usr/share/texlive/texmf-dist/tex/latex/oberdiek/grfext.sty)
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg))
(../VERSION)

LaTeX Warning: No \author given.

[1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}]pdfTeX warning (ext4): de
stination with the same identifier (name{page.1}) has been already used, duplic
ate ignored
<to be read again> 
                   \relax 
l.23 \break
            [1] (../VERSION)
(/usr/share/texlive/texmf-dist/tex/latex/base/omscmr.fd)
(./Chapter1Introduction.tex [2]
Chapter 1.
[3]) (./Chapter2InstallationandFirstUse.tex [4]
Chapter 2.
(./ask-manual.out.pyg) (./ask-manual.out.pyg) (./ask-manual.out.pyg)
(./ask-manual.out.pyg [5]) (./ask-manual.out.pyg) (./ask-manual.out.pyg)
(./ask-manual.out.pyg) (./ask-manual.out.pyg [6]) (./ask-manual.out.pyg)
(./ask-manual.out.pyg [7]) (./ask-manual.out.pyg) (./ask-manual.out.pyg)
<figures/ASK-first-plot.png, id=68, 1003.75pt x 1204.5pt>
<use figures/ASK-first-plot.png> [8]) (./Chapter3ExperimentSetup.tex [9 <./figu
res/ASK-first-plot.png (PNG copy)>]
Chapter 3.
<figures/ASK-modules-pipeline.png, id=77, 1199.48125pt x 475.7775pt>
<use figures/ASK-modules-pipeline.png> [10 <./figures/ASK-modules-pipeline.png 
(PNG copy)>] (./ask-manual.out.pyg) (./ask-manual.out.pyg
Overfull \hbox (2.87347pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 11 
[11]) (./ask-manual.out.pyg
Overfull \hbox (3.73596pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 12 
[12])
Overfull \hbox (3.73596pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 13 
[13] (./ask-manual.out.pyg)
Overfull \hbox (3.62097pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 14 
[14] (./ask-manual.out.pyg
Overfull \hbox (3.73596pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 15 
[15]) (./ask-manual.out.pyg
Overfull \hbox (3.73596pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 16 
[16]) <figures/ASK-gauss2D-ideal.png, id=116, 481.8pt x 481.8pt>
<use figures/ASK-gauss2D-ideal.png>
Overfull \hbox (3.44847pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 17 
[17] (./ask-manual.out.pyg
Overfull \hbox (3.73596pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 18 
[18 <./figures/ASK-gauss2D-ideal.png>]) (./ask-manual.out.pyg)
(./ask-manual.out.pyg
Overfull \hbox (3.73596pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 19 
[19]) (./ask-manual.out.pyg) (./ask-manual.out.pyg)
Overfull \hbox (4.02345pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 20 
[20] (./ask-manual.out.pyg) (./ask-manual.out.pyg) (./ask-manual.out.pyg)
(./ask-manual.out.pyg) (./ask-manual.out.pyg
Overfull \hbox (3.16096pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 21 
[21]) (./ask-manual.out.pyg) (./ask-manual.out.pyg)
Overfull \hbox (4.02345pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 22 
[22] <figures/ASK-gauss-levelplot.png, id=160, 1003.75pt x 1204.5pt>
<use figures/ASK-gauss-levelplot.png> (./ask-manual.out.pyg
Overfull \hbox (4.02345pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 23 
[23 <./figures/ASK-gauss-levelplot.png (PNG copy)>]) (./ask-manual.out.pyg)
<figures/ASK-gauss-timeseries.png, id=166, 1003.75pt x 626.34pt>
<use figures/ASK-gauss-timeseries.png> (./ask-manual.out.pyg
Overfull \hbox (3.90846pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 24 
[24 <./figures/ASK-gauss-timeseries.png>]) (./ask-manual.out.pyg)
Overfull \hbox (33.52849pt too wide) in paragraph at lines 549--550
\OT1/cmr/m/n/10 (-20) ex-plo-ration space. The model gen-er-ated in the last it
-er-a-tion is \OT1/cmtt/m/n/10 output/model00009.data\OT1/cmr/m/n/10 (-20) . 
(./ask-manual.out.pyg) (./ask-manual.out.pyg) (./ask-manual.out.pyg))
(./Chapter4StandardModule.tex
Overfull \hbox (4.02345pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 25 
[25]
Chapter 4.

Underfull \hbox (badness 10000) in paragraph at lines 18--18
[]\OT1/cmr/m/n/10 (+20) string:

Underfull \hbox (badness 10000) in paragraph at lines 18--18
\OT1/cmr/m/n/10 (+20) ``ran-dom'',

Overfull \hbox (62.99474pt too wide) in paragraph at lines 14--21
[][] 

Underfull \hbox (badness 10000) in paragraph at lines 30--30
[]\OT1/cmr/m/n/10 (+20) string:

Underfull \hbox (badness 3333) in paragraph at lines 30--30
\OT1/cmr/m/n/10 (+20) ``sobol'' or

Overfull \hbox (62.99474pt too wide) in paragraph at lines 26--33
[][] 
[26]
Overfull \hbox (62.99474pt too wide) in paragraph at lines 38--44
[][] 

Overfull \hbox (62.99474pt too wide) in paragraph at lines 49--56
[][] 

Overfull \hbox (62.99474pt too wide) in paragraph at lines 66--71
[][] 

Overfull \hbox (3.73596pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 27 
[27]
Overfull \hbox (62.99474pt too wide) in paragraph at lines 80--88
[][] 

Overfull \hbox (13.51212pt too wide) in paragraph at lines 100--100
[]\OT1/cmr/m/n/10 (-20) ponderate[]by[]size| 

Overfull \hbox (62.99474pt too wide) in paragraph at lines 93--102
[][] 

Overfull \hbox (4.02345pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 28 
[28]
Overfull \hbox (62.99474pt too wide) in paragraph at lines 107--112
[][] 

Overfull \hbox (62.99474pt too wide) in paragraph at lines 118--123
[][] 

Overfull \hbox (62.99474pt too wide) in paragraph at lines 131--136
[][] 

Overfull \hbox (4.02345pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 29 
[29]
Overfull \hbox (62.99474pt too wide) in paragraph at lines 145--150
[][] 

Overfull \hbox (8.4299pt too wide) in paragraph at lines 159--159
[]\OT1/cmr/m/n/10 (-20) interactiondepth| 

Underfull \hbox (badness 10000) in paragraph at lines 161--161
[]\OT1/cmr/m/n/10 (+20) string:

Underfull \hbox (badness 10000) in paragraph at lines 161--161
\OT1/cmr/m/n/10 (+20) ``gaus-sian'',

Underfull \hbox (badness 10000) in paragraph at lines 161--161
\OT1/cmr/m/n/10 (+20) ``laplace'',

Underfull \hbox (badness 10000) in paragraph at lines 161--161
\OT1/cmr/m/n/10 (+20) list check

Overfull \hbox (62.99474pt too wide) in paragraph at lines 155--163
[][] 

Overfull \hbox (62.99474pt too wide) in paragraph at lines 178--183
[][] 

Overfull \hbox (4.02345pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 30 
[30] (./ask-manual.out.pyg)
Overfull \hbox (62.99474pt too wide) in paragraph at lines 199--206
[][] 

Overfull \hbox (42.15982pt too wide) in paragraph at lines 219--219
\OT1/cmr/m/n/10 (-20) porter/generic/1D.R''

Underfull \hbox (badness 10000) in paragraph at lines 219--219
\OT1/cmr/m/n/10 (+20) or ``re-

Overfull \hbox (42.15982pt too wide) in paragraph at lines 219--219
\OT1/cmr/m/n/10 (-20) porter/generic/2D.R''

Underfull \hbox (badness 10000) in paragraph at lines 219--219
\OT1/cmr/m/n/10 (+20) vided

Overfull \hbox (4.31096pt too wide) in paragraph at lines 221--221
[]\OT1/cmr/m/n/10 (-20) max[]error[]scale| 

Overfull \hbox (62.99474pt too wide) in paragraph at lines 215--223
[][] 
) (./Chapter5WritingModules.tex
Overfull \hbox (3.16096pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 31 
[31]
Overfull \hbox (4.02345pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 32 
[32]
Chapter 5.

LaTeX Font Warning: Font shape `OML/cmtt/m/n' undefined
(Font)              using `OML/cmm/m/it' instead
(Font)              for symbol `textless' on input line 18.


Overfull \hbox (5.65395pt too wide) in paragraph at lines 34--35
[]\OT1/cmr/m/it/10 (-20) Interface: \OT1/cmtt/m/n/10 source \OML/cmtt/m/n/10 <\
OT1/cmtt/m/n/10 configuration\OML/cmtt/m/n/10 > <\OT1/cmtt/m/n/10 requested[]fi
le\OML/cmtt/m/n/10 > <\OT1/cmtt/m/n/10 output[]file\OML/cmtt/m/n/10 > 
[33]
Overfull \hbox (25.18376pt too wide) in paragraph at lines 57--58
[]\OT1/cmr/m/it/10 (-20) Interface: \OT1/cmtt/m/n/10 model[]build \OML/cmtt/m/n
/10 <\OT1/cmtt/m/n/10 configuration\OML/cmtt/m/n/10 > <\OT1/cmtt/m/n/10 labelle
d[]file\OML/cmtt/m/n/10 > <\OT1/cmtt/m/n/10 output[]file\OML/cmtt/m/n/10 > 

Overfull \hbox (37.15367pt too wide) in paragraph at lines 70--71
[]\OT1/cmr/m/it/10 (-20) Interface: \OT1/cmtt/m/n/10 model[]predict \OML/cmtt/m
/n/10 <\OT1/cmtt/m/n/10 configuration.conf\OML/cmtt/m/n/10 > <\OT1/cmtt/m/n/10 
model\OML/cmtt/m/n/10 > <\OT1/cmtt/m/n/10 requested[]file\OML/cmtt/m/n/10 >

Overfull \hbox (3.2122pt too wide) in paragraph at lines 75--76
[]\OT1/cmtt/m/n/10 model[]file\OT1/cmr/m/n/10 (-20) : path of the model file, p
ro-duced by the as-so-ci-ated \OT1/cmtt/m/n/10 model[]build

Overfull \hbox (3.90846pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 34 
[34]
Overfull \hbox (1.874pt too wide) in paragraph at lines 124--125
[]\OT1/cmr/m/it/10 (-20) Interface: \OT1/cmtt/m/n/10 reporter \OML/cmtt/m/n/10 
<\OT1/cmtt/m/n/10 configuration\OML/cmtt/m/n/10 > <\OT1/cmtt/m/n/10 iteration\O
ML/cmtt/m/n/10 > <\OT1/cmtt/m/n/10 labelled[]file\OML/cmtt/m/n/10 >

Overfull \hbox (4.02345pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 35 
[35] (./ask-manual.out.pyg) (./ask-manual.out.pyg)
Overfull \hbox (4.02345pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 36 
[36] (./ask-manual.out.pyg) (./ask-manual.out.pyg) (./ask-manual.out.pyg)
(./ask-manual.out.pyg) (./ask-manual.out.pyg) (./ask-manual.out.pyg)
(./ask-manual.out.pyg)
Overfull \hbox (3.73596pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 37 
[37] <figures/ASK-Custom-Grid.png, id=276, 1003.75pt x 1204.5pt>
<use figures/ASK-Custom-Grid.png>) (./Chapter6Support.tex
Overfull \hbox (4.02345pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 38 
[38 <./figures/ASK-Custom-Grid.png (PNG copy)>]
Chapter 6.
[39] (./ask-manual.out.pyg)) (./fdl.tex
Overfull \hbox (3.90846pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 40 
[40] [41]
Overfull \hbox (3.90846pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 42 
[42]
Overfull \hbox (3.90846pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 43 
[43]
Overfull \hbox (3.79347pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 44 
[44]
Overfull \hbox (3.90846pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 45 
[45]
Overfull \hbox (3.90846pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 46 
[46]
Overfull \hbox (3.62097pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 47 
[47])
Overfull \hbox (3.90846pt too wide) has occurred while \output is active
[]\OT1/cmr/bx/n/10 48 
[48] (./ask-manual.aux)

Package rerunfilecheck Warning: File `ask-manual.out' has changed.
(rerunfilecheck)                Rerun to get outlines right
(rerunfilecheck)                or use package `bookmark'.


LaTeX Font Warning: Some font shapes were not available, defaults substituted.

 )
(see the transcript file for additional information)</usr/share/texlive/texmf-d
ist/fonts/type1/public/amsfonts/cm/cmbx10.pfb></usr/share/texlive/texmf-dist/fo
nts/type1/public/amsfonts/cm/cmbx12.pfb></usr/share/texlive/texmf-dist/fonts/ty
pe1/public/amsfonts/cm/cmitt10.pfb></usr/share/texlive/texmf-dist/fonts/type1/p
ublic/amsfonts/cm/cmmi10.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/
amsfonts/cm/cmmi5.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfont
s/cm/cmr10.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cm
r12.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr17.pfb
></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr5.pfb></usr/s
hare/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr7.pfb></usr/share/tex
live/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy10.pfb></usr/share/texlive/t
exmf-dist/fonts/type1/public/amsfonts/cm/cmsy7.pfb></usr/share/texlive/texmf-di
st/fonts/type1/public/amsfonts/cm/cmti10.pfb></usr/share/texlive/texmf-dist/fon
ts/type1/public/amsfonts/cm/cmtt10.pfb>
Output written on ask-manual.pdf (49 pages, 908099 bytes).
Transcript written on ask-manual.log.
mv ask-manual.pdf ask-manual-1.0.1.pdf
make[2]: Leaving directory '/«PKGBUILDDIR»/doc'
make[1]: Leaving directory '/«PKGBUILDDIR»'
   dh_auto_test
make[1]: Entering directory '/«PKGBUILDDIR»'
nosetests
.................F...........
======================================================================
FAIL: If not enough points reached control should continue
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/«PKGBUILDDIR»/tests/test-0003-control.py", line 48, in 
test_points_control_continue
    assert r.returncode == 0, "control should continue with 0 return code"
AssertionError: control should continue with 0 return code
-------------------- >> begin captured stdout << ---------------------
/«PKGBUILDDIR»/control/points

--------------------- >> end captured stdout << ----------------------

----------------------------------------------------------------------
Ran 29 tests in 279.367s

FAILED (failures=1)
make[1]: *** [test] Error 1
Makefile:21: recipe for target 'test' failed
make[1]: Leaving directory '/«PKGBUILDDIR»'
dh_auto_test: make -j1 test returned exit code 2
make: *** [build] Error 2
debian/rules:11: recipe for target 'build' failed
dpkg-buildpackage: error: debian/rules build gave error exit status 2
────────────────────────────────────────────────────────────────────────────────
Build finished at 20141109-1610

Finished
────────

E: Build failure (dpkg-buildpackage died)

┌──────────────────────────────────────────────────────────────────────────────┐
│ Cleanup                                                                      │
└──────────────────────────────────────────────────────────────────────────────┘

Purging /«BUILDDIR»
Not cleaning session: cloned chroot in use

┌──────────────────────────────────────────────────────────────────────────────┐
│ Summary                                                                      │
└──────────────────────────────────────────────────────────────────────────────┘

Build Architecture: armhf
Build-Space: 111112
Build-Time: 319
Distribution: jessie
Fail-Stage: build
Host Architecture: armhf
Install-Time: 365
Job: ask_1.0.1-1
Machine Architecture: armhf
Package: ask
Package-Time: 733
Source-Version: 1.0.1-1
Space: 111112
Status: attempted
Version: 1.0.1-1
────────────────────────────────────────────────────────────────────────────────
Finished at 20141109-1610
Build needed 00:12:13, 111112k disc space

--- End Message ---

--- Begin Message ---

Source: ask
Source-Version: 1.0.1-2

We believe that the bug you reported is fixed in the latest version of
ask, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 768...@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Pablo Oliveira <pa...@sifflez.org> (supplier of updated ask package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmas...@ftp-master.debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Format: 1.8
Date: Sun, 16 Nov 2014 18:36:10 +0200
Source: ask
Binary: ask
Architecture: source all
Version: 1.0.1-2
Distribution: unstable
Urgency: low
Maintainer: Debian Science Maintainers 
<debian-science-maintain...@lists.alioth.debian.org>
Changed-By: Pablo Oliveira <pa...@sifflez.org>
Description:
 ask        - Adaptive Sampling Kit for big experimental spaces
Closes: 768844
Changes:
 ask (1.0.1-2) unstable; urgency=low
 .
   * Fix failing test on 32 bit architectures. Thanks to Andreas Moog for
     reporting the bug. Closes: #768844.
   * Fix lintian error: python-depends-but-no-python-helper
 .
   [ Sylvestre Ledru ]
   * Standards-Version updated to 3.9.5
Checksums-Sha1:
 c68fe176ce7b80dd3a31e9caff77b68226e06b15 2180 ask_1.0.1-2.dsc
 59884510c2cbb0246afb4bfb852b45986f96e3f3 4704 ask_1.0.1-2.debian.tar.xz
 ad2bf8f9c0187a134689240f4272d6a36c49d813 2710536 ask_1.0.1-2_all.deb
Checksums-Sha256:
 c7dfd7ea164db9b91e24796792ac9942468d333a0e9d42a160c9482db5795924 2180 
ask_1.0.1-2.dsc
 06caca4598a5ea3ab560389d9423aeacd97b6b1247aae7f721ee2b634e9d5ca8 4704 
ask_1.0.1-2.debian.tar.xz
 669d96e3cef8e7d9b2abd7d849b93216fbac50360cb0ac1734e7ce416b6c1ab9 2710536 
ask_1.0.1-2_all.deb
Files:
 ff8bb28be50b0a2970a8c2bd56ff328e 2180 science extra ask_1.0.1-2.dsc
 85a8205762747b8642562b4b675f1605 4704 science extra ask_1.0.1-2.debian.tar.xz
 2b4f268a6194671b49e8b5598bc77101 2710536 science extra ask_1.0.1-2_all.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
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=i/VQ
-----END PGP SIGNATURE-----

--- End Message ---