Package: src:linux
Version: 3.10.1-1
Severity: grave
Tags: upstream
Justification: renders package unusable

Hi,

Kernel upgrade had a module insertion error at install (not sure of the exact 
message, but the idea is here)
I rebooted and nvidia module didn't load, I tried reinstalling 
nvidia-kernel-dkms, but the compilation failed, and module can't be build.
I'll try to add the error message at the end, but I only have console, and no 
third button.
thanks


-- Package-specific info:
** Version:
Linux version 3.10-1-amd64 (debian-ker...@lists.debian.org) (gcc version 4.7.3 
(Debian 4.7.3-6) ) #1 SMP Debian 3.10.1-1 (2013-07-16)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.10-1-amd64 
root=UUID=1282b55f-af24-4f23-8c22-16580ff2ebd7 ro quiet

** Not tainted

** Kernel log:
[    2.588269] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
[    2.589116] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.597810] b43-phy0: Broadcom 4321 WLAN found (core revision 12)
[    2.604867] hda_codec: ALC889A: SKU not ready 0x400000f0
[    2.608172] input: HDA Digital PCBeep as 
/devices/pci0000:00/0000:00:1b.0/input/input6
[    2.620688] input: HDA Intel Headphone as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    2.621001] input: HDA Intel Line as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    2.640233] b43-phy0: Found PHY: Analog 5, Type 4 (N), Revision 2
[    2.664688] Broadcom 43xx driver loaded [ Features: PMNLS ]
[    2.667196] b43 ssb0:0: firmware: agent loaded b43/ucode11.fw into memory
[    2.679002] b43 ssb0:0: firmware: agent loaded b43/n0initvals11.fw into 
memory
[    2.680450] b43 ssb0:0: firmware: agent loaded b43/n0bsinitvals11.fw into 
memory
[    2.694912] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    2.724154] applesmc: key=261 fan=2 temp=14 index=14 acc=1 lux=2 kbd=1
[    2.747135] input: applesmc as /devices/platform/applesmc.768/input/input9
[    2.880813] media: Linux media interface: v0.10
[    2.885745] Linux video capture interface: v2.00
[    2.893284] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8502)
[    2.896401] input: Built-in iSight as 
/devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input10
[    2.896561] usbcore: registered new interface driver uvcvideo
[    2.896564] USB Video Class driver (1.1.1)
[    3.004091] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    3.184079] usb 3-1: New USB device found, idVendor=0a5c, idProduct=4500
[    3.184090] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.184098] usb 3-1: Product: BRCM2046 Hub
[    3.184105] usb 3-1: Manufacturer: Apple Inc.
[    3.186170] hub 3-1:1.0: USB hub found
[    3.188046] hub 3-1:1.0: 3 ports detected
[    3.360493] EXT3-fs (sda3): using internal journal
[    3.432158] usb 7-1: new low-speed USB device number 2 using uhci_hcd
[    3.570959] device-mapper: uevent: version 1.0.3
[    3.571106] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: 
dm-de...@redhat.com
[    3.609251] usb 7-1: New USB device found, idVendor=05ac, idProduct=8242
[    3.609263] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.609270] usb 7-1: Product: IR Receiver
[    3.609277] usb 7-1: Manufacturer: Apple Computer, Inc.
[    3.804460] fuse init (API version 7.22)
[    3.818305] loop: module loaded
[    3.841945] nbd: registered device at major 43
[    3.860055] usb 7-2: new full-speed USB device number 3 using uhci_hcd
[    3.881642] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: 
discard,commit=60
[    4.050224] usb 7-2: New USB device found, idVendor=05ac, idProduct=0231
[    4.050229] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.050231] usb 7-2: Product: Apple Internal Keyboard / Trackpad
[    4.050234] usb 7-2: Manufacturer: Apple, Inc.
[    4.072180] input: bcm5974 as 
/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/input/input11
[    4.072285] usbcore: registered new interface driver bcm5974
[    4.072798] hidraw: raw HID events driver (C) Jiri Kosina
[    4.094252] usbcore: registered new interface driver usbhid
[    4.094255] usbhid: USB HID core driver
[    4.104891] input: Apple, Inc. Apple Internal Keyboard / Trackpad as 
/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input12
[    4.105035] apple 0003:05AC:0231.0002: input,hidraw0: USB HID v1.11 Keyboard 
[Apple, Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0
[    4.518028] usb 3-1.1: new full-speed USB device number 3 using uhci_hcd
[    4.566296] apple 0003:05AC:0231.0003: hidraw1: USB HID v1.11 Device [Apple, 
Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input1
[    4.652037] usb 3-1.1: New USB device found, idVendor=05ac, idProduct=820f
[    4.652041] usb 3-1.1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3
[    4.652043] usb 3-1.1: Product: Bluetooth USB Host Controller
[    4.652046] usb 3-1.1: Manufacturer: Apple Inc.
[    4.652048] usb 3-1.1: SerialNumber: 00231239E890
[    4.667221] Bluetooth: Core ver 2.16
[    4.667251] NET: Registered protocol family 31
[    4.667253] Bluetooth: HCI device and connection manager initialized
[    4.667269] Bluetooth: HCI socket layer initialized
[    4.667274] Bluetooth: L2CAP socket layer initialized
[    4.667281] Bluetooth: SCO socket layer initialized
[    4.669627] usbcore: registered new interface driver btusb
[    4.748280] Adding 3499996k swap on /home/swap.  Priority:-1 extents:9 
across:5908444k SSD
[    5.656317] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[    5.754180] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.066181] wlan0: authenticate with 00:0f:66:d3:46:eb
[   13.088593] wlan0: send auth to 00:0f:66:d3:46:eb (try 1/3)
[   13.091164] wlan0: authenticated
[   13.091200] b43 ssb0:0 wlan0: disabling HT as WMM/QoS is not supported by 
the AP
[   13.091208] b43 ssb0:0 wlan0: disabling VHT as WMM/QoS is not supported by 
the AP
[   13.092194] wlan0: associate with 00:0f:66:d3:46:eb (try 1/3)
[   13.094966] wlan0: RX AssocResp from 00:0f:66:d3:46:eb (capab=0x411 status=0 
aid=1)
[   13.104555] wlan0: associated
[   13.104579] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   15.078533] RPC: Registered named UNIX socket transport module.
[   15.078539] RPC: Registered udp transport module.
[   15.078542] RPC: Registered tcp transport module.
[   15.078545] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   15.085651] FS-Cache: Loaded
[   15.086680] Key type dns_resolver registered
[   15.098882] FS-Cache: Netfs 'nfs' registered for caching
[   15.117681] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[   15.694946] hdaps: supported laptop not found!
[   15.694951] hdaps: driver init failed (ret=-19)!
[   16.282358] Bluetooth: RFCOMM TTY layer initialized
[   16.282373] Bluetooth: RFCOMM socket layer initialized
[   16.282375] Bluetooth: RFCOMM ver 1.11
[   16.303023] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.303028] Bluetooth: BNEP filters: protocol multicast
[   16.303040] Bluetooth: BNEP socket layer initialized
[   16.364372] lp: driver loaded but no devices found
[   16.376174] ppdev: user-space parallel port driver
[   16.544516] applesmc: light sensor data length set to 6
[   16.681567] input: ACPI Virtual Keyboard Device as 
/devices/virtual/input/input13
[   23.031986] sky2 0000:0c:00.0 eth0: enabling interface
[   23.033319] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

** Model information
sys_vendor: Apple Inc.
product_name: MacBookPro4,1
product_version: 1.0
chassis_vendor: Apple Inc.
chassis_version: Mac-F42C89C8
bios_vendor: Apple Inc.
bios_version:    MBP41.88Z.00C1.B03.0802271651
board_vendor: Apple Inc.
board_name: Mac-F42C89C8
board_version: PVT

** Loaded modules:
parport_pc
ppdev
lp
parport
bnep
rfcomm
snd_hrtimer
cpufreq_powersave
cpufreq_stats
cpufreq_userspace
cpufreq_conservative
binfmt_misc
uinput
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
btusb
bluetooth
hid_apple
usbhid
bcm5974
hid
ext4
crc16
jbd2
nbd
loop
fuse
dm_crypt
dm_mod
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
media
joydev
arc4
snd_hda_codec_realtek
b43
iTCO_wdt
iTCO_vendor_support
bcma
evdev
snd_hda_intel
mac80211
snd_hda_codec
snd_hwdep
snd_pcm_oss
coretemp
snd_mixer_oss
snd_pcm
snd_page_alloc
cfg80211
kvm_intel
snd_seq_midi
applesmc
snd_seq_midi_event
input_polldev
rfkill
rng_core
kvm
snd_rawmidi
pcspkr
i2c_i801
lpc_ich
i2c_core
mfd_core
snd_seq
snd_seq_device
snd_timer
video
snd
soundcore
acpi_cpufreq
mperf
battery
ac
apple_bl
processor
button
thermal_sys
ext3
mbcache
jbd
sg
sd_mod
crc_t10dif
sr_mod
cdrom
ata_generic
microcode
firewire_ohci
ata_piix
sky2
firewire_core
crc_itu_t
ssb
uhci_hcd
mmc_core
pcmcia
pcmcia_core
ehci_pci
ehci_hcd
libata
scsi_mod
usbcore
usb_common

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory 
Controller Hub [8086:2a00] (rev 03)
        Subsystem: Apple Inc. Device [106b:00a3]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI 
Express Root Port [8086:2a01] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 256 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00007000-00007fff
        Memory behind bridge: d0000000-d30fffff
        Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #4 [8086:2834] (rev 04) (prog-if 00 [UHCI])
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 4: I/O ports at 80c0 [size=32]
        Kernel driver in use: uhci_hcd

00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #5 [8086:2835] (rev 04) (prog-if 00 [UHCI])
        Subsystem: Apple Inc. Device [106b:00a3]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 16
        Region 4: I/O ports at 80a0 [size=32]
        Kernel driver in use: uhci_hcd

00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI 
Controller #2 [8086:283a] (rev 04) (prog-if 20 [EHCI])
        Subsystem: Apple Inc. Device [106b:00a3]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 21
        Region 0: Memory at db504c00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio 
Controller [8086:284b] (rev 04)
        Subsystem: Apple Inc. Device [106b:00a3]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 256 bytes
        Interrupt: pin A routed to IRQ 46
        Region 0: Memory at db500000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 1 [8086:283f] (rev 04) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 256 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: db400000-db4fffff
        Prefetchable memory behind bridge: 00000000db600000-00000000db7fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 3 [8086:2843] (rev 04) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 256 bytes
        Bus: primary=00, secondary=03, subordinate=0a, sec-latency=0
        I/O behind bridge: 00006000-00006fff
        Memory behind bridge: d7400000-db3fffff
        Prefetchable memory behind bridge: 00000000d3100000-00000000d70fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 5 [8086:2847] (rev 04) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 256 bytes
        Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: d7300000-d73fffff
        Prefetchable memory behind bridge: 00000000db800000-00000000db9fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 6 [8086:2849] (rev 04) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 256 bytes
        Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
        I/O behind bridge: 00005000-00005fff
        Memory behind bridge: d7200000-d72fffff
        Prefetchable memory behind bridge: 00000000dba00000-00000000dbcfffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #1 [8086:2830] (rev 04) (prog-if 00 [UHCI])
        Subsystem: Apple Inc. Device [106b:00a3]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at 8080 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #2 [8086:2831] (rev 04) (prog-if 00 [UHCI])
        Subsystem: Apple Inc. Device [106b:00a3]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 18
        Region 4: I/O ports at 8060 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #3 [8086:2832] (rev 04) (prog-if 00 [UHCI])
        Subsystem: Apple Inc. Device [106b:00a3]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 21
        Region 4: I/O ports at 8040 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI 
Controller #1 [8086:2836] (rev 04) (prog-if 20 [EHCI])
        Subsystem: Apple Inc. Device [106b:00a3]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin D routed to IRQ 20
        Region 0: Memory at db504800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge 
[8086:2448] (rev f4) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=32
        Memory behind bridge: d7100000-d71fffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface 
Controller [8086:2815] (rev 04)
        Subsystem: Apple Inc. Device [106b:00a3]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: lpc_ich

00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE 
Controller [8086:2850] (rev 04) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: Apple Inc. Device [106b:00a3]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 21
        Region 0: I/O ports at 8108 [size=8]
        Region 1: I/O ports at 811c [size=4]
        Region 2: I/O ports at 8100 [size=8]
        Region 3: I/O ports at 8118 [size=4]
        Region 4: I/O ports at 80e0 [size=16]
        Kernel driver in use: ata_piix

00:1f.2 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) 
SATA Controller [IDE mode] [8086:2828] (rev 04) (prog-if 8f [Master SecP SecO 
PriP PriO])
        Subsystem: Apple Inc. Device [106b:00a3]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 18
        Region 0: I/O ports at 80f8 [size=8]
        Region 1: I/O ports at 8114 [size=4]
        Region 2: I/O ports at 80f0 [size=8]
        Region 3: I/O ports at 8110 [size=4]
        Region 4: I/O ports at 8020 [size=16]
        Region 5: I/O ports at 4000 [size=16]
        Capabilities: <access denied>
        Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller 
[8086:283e] (rev 04)
        Subsystem: Apple Inc. Device [106b:00a3]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 20
        Region 0: Memory at db505000 (32-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at efa0 [size=32]

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G84M [GeForce 
8600M GT] [10de:0407] (rev a1) (prog-if 00 [VGA controller])
        Subsystem: Apple Inc. Device [106b:00a3]
        Physical Slot: 1
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 256 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
        Region 3: Memory at d0000000 (64-bit, non-prefetchable) [size=32M]
        Region 5: I/O ports at 7000 [size=128]
        Expansion ROM at d3000000 [disabled] [size=128K]
        Capabilities: <access denied>

0b:00.0 Network controller [0280]: Broadcom Corporation BCM4321 802.11a/b/g/n 
[14e4:4328] (rev 05)
        Subsystem: Apple Inc. AirPort Extreme [106b:008c]
        Physical Slot: 4
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 256 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at d7300000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: b43-pci-bridge

0c:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8058 PCI-E 
Gigabit Ethernet Controller [11ab:436a] (rev 13)
        Subsystem: Marvell Technology Group Ltd. Imac 8,1 Wired Ethernet 
Adapter [11ab:00ba]
        Physical Slot: 5
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 256 bytes
        Interrupt: pin A routed to IRQ 45
        Region 0: Memory at d7200000 (64-bit, non-prefetchable) [size=16K]
        Region 2: I/O ports at 5000 [size=256]
        Expansion ROM at dba00000 [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: sky2

0d:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB82AA2 IEEE-1394b Link 
Layer Controller [104c:8025] (rev 02) (prog-if 10 [OHCI])
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 248 (500ns min, 1000ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at d7104000 (32-bit, non-prefetchable) [size=2K]
        Region 1: Memory at d7100000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: firewire_ohci


** USB devices:
Bus 002 Device 002: ID 05ac:8502 Apple, Inc. Built-in iSight
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 003: ID 05ac:0231 Apple, Inc. Internal Keyboard/Trackpad 
(MacBook Pro 4,1) (ISO)
Bus 007 Device 002: ID 05ac:8242 Apple, Inc. Built-in IR Receiver
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 05ac:820f Apple, Inc. Bluetooth HCI
Bus 003 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of 
BCM2046 Bluetooth)
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: jessie/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.10-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) (ignored: LC_ALL 
set to fr_FR.UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.10-1-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.50
ii  initramfs-tools [linux-initramfs-tool]  0.113
ii  kmod                                    9-3
ii  linux-base                              3.5
ii  module-init-tools                       9-3

Versions of packages linux-image-3.10-1-amd64 recommends:
ii  firmware-linux-free  3.2

Versions of packages linux-image-3.10-1-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  extlinux                3:4.05+dfsg-6+deb7u3
ii  grub-pc                 2.00-15
pn  linux-doc-3.10          <none>

Versions of packages linux-image-3.10-1-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
ii  firmware-ipw2x00        0.39
pn  firmware-ivtv           <none>
ii  firmware-iwlwifi        0.39
ii  firmware-libertas       0.39
ii  firmware-linux          0.39
ii  firmware-linux-nonfree  0.39
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
ii  firmware-ralink         0.39
ii  firmware-realtek        0.39
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.10-1-amd64/postinst/depmod-error-initrd-3.10-1-amd64: false
  linux-image-3.10-1-amd64/prerm/removing-running-kernel-3.10-1-amd64: true
  linux-image-3.10-1-amd64/postinst/ignoring-ramdisk:
  linux-image-3.10-1-amd64/postinst/missing-firmware-3.10-1-amd64:


-- 
To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Reply via email to