Package: linux-2.6 Version: 2.6.32-48squeeze1 Severity: critical Justification: breaks unrelated software
When try to insert usbcore module get message FATAL: Error inserting usbcore (/lib/modules/2.6.32-5-kirkwood/kernel/drivers/usb/core/usbcore.ko): Unknown symbol in module, or unknown parameter (see dmesg) syslog shows: kernel: [ 365.043708] usbcore: Unknown symbol current_is_keventd kernel: [ 365.049776] usbcore: Unknown symbol add_device_randomness So no modules depending on usb can load. usbcore and dependent modules load when using linux-image-2.6.32-5-kirkwood_2.6.32-46_armel.deb, but not with later versions: linux-image-2.6.32-5-kirkwood_2.6.32-48_armel.deb or linux-image-2.6.32-5-kirkwood_2.6.32-48squeeze1_armel.deb Note that using latest linux-base does not affect the problem - an old version is installed as I have to downgrade to linux-image-2.6.32-5-kirkwood_2.6.32-46_armel to use the system. I initially saw the problem with all the latest packages intalled. -- Package-specific info: ** Version: Linux version 2.6.32-5-kirkwood (Debian 2.6.32-45) (da...@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Sun May 6 16:57:51 UTC 2012 ** Command line: console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000 ramdisk=32768 ** Not tainted ** Kernel log: [ 25.663305] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 25.703333] ata2.00: ATA-8: ST1000NM0011, SN03, max UDMA/133 [ 25.709023] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 25.773404] ata2.00: configured for UDMA/133 [ 25.778020] scsi 1:0:0:0: Direct-Access ATA ST1000NM0011 SN03 PQ: 0 ANSI: 5 [ 25.834569] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 25.842858] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 25.851801] sd 0:0:0:0: [sda] Write Protect is off [ 25.856658] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.856905] sd 1:0:0:0: [sdb] Write Protect is off [ 25.861727] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 25.861906] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.871097] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.881514] sda: [ 25.884036] sdb: sdb1 sdb2 sdb3 < sda1 sda2 sda3 < sdb5 sda5 sdb6 > [ 25.915560] sda6 > [ 25.921200] sd 1:0:0:0: [sdb] Attached SCSI disk [ 25.931331] sd 0:0:0:0: [sda] Attached SCSI disk [ 26.323601] md: raid1 personality registered for level 1 [ 26.351570] mdadm: sending ioctl 1261 to a partition! [ 26.356692] mdadm: sending ioctl 1261 to a partition! [ 26.362367] mdadm: sending ioctl 1261 to a partition! [ 26.367509] mdadm: sending ioctl 1261 to a partition! [ 26.372954] mdadm: sending ioctl 1261 to a partition! [ 26.378112] mdadm: sending ioctl 1261 to a partition! [ 26.383703] mdadm: sending ioctl 1261 to a partition! [ 26.388789] mdadm: sending ioctl 1261 to a partition! [ 26.394854] mdadm: sending ioctl 1261 to a partition! [ 26.399933] mdadm: sending ioctl 1261 to a partition! [ 26.428623] md: md0 stopped. [ 26.451073] md: bind<sdb1> [ 26.463788] md: bind<sda1> [ 26.473348] raid1: raid set md0 active with 2 out of 2 mirrors [ 26.479354] md0: detected capacity change from 0 to 248500224 [ 26.490560] md0: unknown partition table [ 26.722733] md: md1 stopped. [ 26.735482] md: bind<sdb2> [ 26.746362] md: bind<sda2> [ 26.765069] raid1: raid set md1 active with 2 out of 2 mirrors [ 26.771072] md1: detected capacity change from 0 to 279957504 [ 26.782237] md1: unknown partition table [ 27.014813] md: md2 stopped. [ 27.036009] md: bind<sdb6> [ 27.039216] md: bind<sda6> [ 27.057734] raid1: raid set md2 active with 2 out of 2 mirrors [ 27.063854] md2: detected capacity change from 0 to 999172202496 [ 27.075301] md2: unknown partition table [ 27.332238] device-mapper: uevent: version 1.0.3 [ 27.339717] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-de...@redhat.com [ 27.509207] kjournald starting. Commit interval 5 seconds [ 27.514776] EXT3-fs: mounted filesystem with ordered data mode. [ 28.603054] udev[196]: starting version 164 [ 29.040458] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 29.297606] MV-643xx 10/100/1000 ethernet driver version 1.4 [ 29.304326] mv643xx_eth smi: probed [ 29.326156] usbcore: Unknown symbol current_is_keventd [ 29.332136] usbcore: Unknown symbol add_device_randomness [ 29.381591] net eth0: port 0 with MAC address 00:08:9b:c0:da:a1 [ 30.422949] Adding 488144k swap on /dev/sda5. Priority:-1 extents:1 across:488144k [ 30.438974] Adding 488144k swap on /dev/sdb5. Priority:-2 extents:1 across:488144k [ 30.643725] EXT3 FS on md1, internal journal [ 30.942044] loop: module loaded [ 33.825666] kjournald starting. Commit interval 5 seconds [ 33.873752] EXT3 FS on dm-3, internal journal [ 33.878151] EXT3-fs: mounted filesystem with ordered data mode. [ 33.900191] kjournald starting. Commit interval 5 seconds [ 33.906331] EXT3 FS on dm-2, internal journal [ 33.910728] EXT3-fs: mounted filesystem with ordered data mode. [ 33.942959] kjournald starting. Commit interval 5 seconds [ 33.949118] EXT3 FS on dm-0, internal journal [ 33.953539] EXT3-fs: mounted filesystem with ordered data mode. [ 33.982274] kjournald starting. Commit interval 5 seconds [ 34.023714] EXT3 FS on dm-1, internal journal [ 34.028108] EXT3-fs: mounted filesystem with ordered data mode. [ 35.882253] NET: Registered protocol family 10 [ 36.175888] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 36.565047] RPC: Registered udp transport module. [ 36.569781] RPC: Registered tcp transport module. [ 36.574649] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 36.764652] Slow work thread pool: Starting up [ 36.780822] Slow work thread pool: Ready [ 36.786242] FS-Cache: Loaded [ 36.986029] FS-Cache: Netfs 'nfs' registered for caching [ 37.165030] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 37.626579] fuse init (API version 7.13) [ 38.220696] ip_tables: (C) 2000-2006 Netfilter Core Team [ 38.445300] nf_conntrack version 0.5.0 (3994 buckets, 15976 max) [ 38.455583] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 38.463095] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 38.471130] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 38.865673] svc: failed to register lockdv1 RPC service (errno 97). [ 38.907399] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 38.947449] NFSD: starting 90-second grace period [ 39.351008] eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 39.358101] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 39.581825] FW-INP IN=eth0 OUT= MAC=00:08:9b:c0:da:a1:00:04:ed:dc:26:4c:08:00 SRC=208.67.220.220 DST=192.168.3.96 LEN=51 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=53 DPT=53242 LEN=31 [ 39.599084] FW-INP IN=eth0 OUT= MAC=00:08:9b:c0:da:a1:00:04:ed:dc:26:4c:08:00 SRC=208.67.222.222 DST=192.168.3.96 LEN=51 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=53 DPT=55869 LEN=31 [ 50.343293] eth0: no IPv6 routers present [ 365.043708] usbcore: Unknown symbol current_is_keventd [ 365.049776] usbcore: Unknown symbol add_device_randomness ** Model information Processor : Feroceon 88FR131 rev 1 (v5l) Hardware : QNAP TS-119/TS-219 Revision : 0000 ** Loaded modules: Module Size Used by ipt_MASQUERADE 1464 0 xt_multiport 2341 0 xt_tcpudp 2129 0 nf_conntrack_irc 2757 0 nf_conntrack_ftp 4998 0 xt_state 1125 0 xt_limit 1442 0 ipt_LOG 4585 0 iptable_nat 4305 0 nf_nat 13025 2 ipt_MASQUERADE,iptable_nat nf_conntrack_ipv4 10003 3 iptable_nat,nf_nat nf_conntrack 49371 7 ipt_MASQUERADE,nf_conntrack_irc,nf_conntrack_ftp,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4 nf_defrag_ipv4 945 1 nf_conntrack_ipv4 iptable_filter 2012 0 ip_tables 9004 2 iptable_nat,iptable_filter x_tables 10753 8 ipt_MASQUERADE,xt_multiport,xt_tcpudp,xt_state,xt_limit,ipt_LOG,iptable_nat,ip_tables fuse 51452 1 nfsd 247752 13 exportfs 3008 1 nfsd nfs 270812 0 lockd 63197 2 nfsd,nfs fscache 34161 1 nfs nfs_acl 2277 2 nfsd,nfs auth_rpcgss 33350 2 nfsd,nfs sunrpc 171391 12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss ipv6 253672 26 ext2 55355 1 loop 11435 0 hmac 2475 0 sha1_generic 1717 0 mv_cesa 9270 0 evdev 6582 1 mv643xx_eth 22574 0 nls_base 5367 0 libphy 14844 1 mv643xx_eth aes_generic 32820 1 mv_cesa gpio_keys 3074 0 inet_lro 5060 1 mv643xx_eth ext3 111204 5 jbd 37738 1 ext3 mbcache 4860 2 ext2,ext3 dm_mod 56891 12 raid1 19757 3 md_mod 80506 4 raid1 sd_mod 31344 10 crc_t10dif 1106 1 sd_mod sata_mv 24398 8 libata 137914 1 sata_mv scsi_mod 124484 2 sd_mod,libata ** PCI devices: ** Sound cards: -- System Information: Debian Release: 6.0.7 APT prefers stable APT policy: (500, 'stable') Architecture: armel (armv5tel) Kernel: Linux 2.6.32-5-kirkwood Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-kirkwood depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs ii linux-base 2.6.32-46 Linux image base package ii module-init-tools 3.12-2 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-kirkwood recommends: pn firmware-linux-free <none> (no description available) ii uboot-mkimage 0.4 generate kernel image for U-Boot Versions of packages linux-image-2.6.32-5-kirkwood suggests: pn fdutils <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-kirkwood is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.32-5-kirkwood/postinst/depmod-error-initrd-2.6.32-5-kirkwood: false linux-image-2.6.32-5-kirkwood/postinst/ignoring-do-bootloader-2.6.32-5-kirkwood: linux-image-2.6.32-5-kirkwood/postinst/missing-firmware-2.6.32-5-kirkwood: linux-image-2.6.32-5-kirkwood/prerm/removing-running-kernel-2.6.32-5-kirkwood: true -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
