Package: src:linux
Version: 3.2.23-1
Severity: critical
Justification: breaks the whole system
Dear Maintainer,
My computer with an intel i7 cpu most times works properly, but sometimes it
gets stuck in a black screen after loggin in from gdm. The relevant lines, from
kern.log (I think) are:
Sep 11 10:56:39 kielo kernel: [ 6.885218] fbcon: inteldrmfb (fb0) is primary
device
Sep 11 10:56:39 kielo kernel: [ 8.326401] Console: switching to colour frame
buffer device 240x67
Sep 11 10:56:39 kielo kernel: [ 8.335424] fb0: inteldrmfb frame buffer
device
Sep 11 10:56:39 kielo kernel: [ 8.335427] drm: registered panic notifier
Sep 11 10:56:39 kielo kernel: [ 8.335446] No ACPI video bus found
Something along these lines is scattered across the internet, and I manage to
consistently boot with either of the solutions:
* Give acpi=off as kernel parameter
* set i915 options modeset=0 in modprobe.d
Neither of these workaround is satisfactory, because then I don't have the full
resolution nor proper gnome 3.
I also tried with kernel 2.6.32-5-amd64, which didn't go into a black screen,
but didn't give proper video support either.
Daniel Landau
-- Package-specific info:
** Version:
Linux version 3.2.0-3-amd64 (Debian 3.2.23-1) (debian-ker...@lists.debian.org)
(gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 02:45:17 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64
root=UUID=217d0928-12cc-46ae-859b-431bacf49356 ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 4.732068] ACPI: Power Button [PWRF]
[ 4.732954] ACPI: Requesting acpi_cpufreq
[ 4.742355] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 4.743816] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 4.753845] [drm] Initialized drm 1.1.0 20060810
[ 4.754155] iTCO_vendor_support: vendor-support=0
[ 4.755435] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 4.755508] iTCO_wdt: Found a Cougar Point TCO device (Version=2,
TCOBASE=0x0460)
[ 4.755572] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.769954] cfg80211: Calling CRDA to update world regulatory domain
[ 4.770170] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.770173] i915 0000:00:02.0: setting latency timer to 64
[ 4.775632] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 4.781808] rtl8192ce 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ
18
[ 4.781816] rtl8192ce 0000:02:00.0: setting latency timer to 64
[ 4.811372] cfg80211: World regulatory domain updated:
[ 4.811374] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 4.811376] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 4.811377] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 4.811379] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 4.811380] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 4.811382] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 4.812104] mtrr: type mismatch for c0000000,10000000 old: write-back new:
write-combining
[ 4.812106] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 4.812506] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 4.812510] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.812511] [drm] Driver supports precise vblank timestamp query.
[ 4.812548] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.823333] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 4.823627] rtlwifi: wireless switch is on
[ 4.867246] input: A4Tech PS/2+USB Mouse as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input4
[ 4.867369] a4tech 0003:09DA:000A.0001: input,hidraw2: USB HID v1.10 Mouse
[A4Tech PS/2+USB Mouse] on usb-0000:00:1a.0-1.1/input0
[ 4.870987] Linux media interface: v0.10
[ 4.889318] Linux video capture interface: v2.00
[ 4.900300] usbcore: registered new interface driver snd-usb-audio
[ 4.900305] uvcvideo: Found UVC 1.00 device USB Video Device (058f:3832)
[ 4.903598] input: USB Video Device as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input5
[ 4.903793] usbcore: registered new interface driver uvcvideo
[ 4.903796] USB Video Class driver (1.1.1)
[ 6.885218] fbcon: inteldrmfb (fb0) is primary device
[ 8.326401] Console: switching to colour frame buffer device 240x67
[ 8.335424] fb0: inteldrmfb frame buffer device
[ 8.335427] drm: registered panic notifier
[ 8.335446] No ACPI video bus found
[ 8.335517] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.335598] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) ->
IRQ 22
[ 8.335667] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 8.335697] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 8.885336] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 8.885497] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 8.885722] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 9.282503] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 9.333822] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 9.351204] loop: module loaded
[ 9.726919] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts:
(null)
[ 9.997667] RPC: Registered named UNIX socket transport module.
[ 9.997671] RPC: Registered udp transport module.
[ 9.997672] RPC: Registered tcp transport module.
[ 9.997674] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.003039] FS-Cache: Loaded
[ 10.011261] FS-Cache: Netfs 'nfs' registered for caching
[ 10.016052] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 10.452331] vboxdrv: Found 8 processor cores.
[ 10.452549] vboxdrv: fAsync=0 offMin=0x1b9 offMax=0x1314
[ 10.452589] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 10.452590] vboxdrv: Successfully loaded version 4.1.18_Debian (interface
0x00190000).
[ 10.561541] vboxpci: IOMMU not found (not registered)
[ 10.695089] Bluetooth: Core ver 2.16
[ 10.695101] NET: Registered protocol family 31
[ 10.695102] Bluetooth: HCI device and connection manager initialized
[ 10.695104] Bluetooth: HCI socket layer initialized
[ 10.695105] Bluetooth: L2CAP socket layer initialized
[ 10.695108] Bluetooth: SCO socket layer initialized
[ 10.696888] Bluetooth: RFCOMM TTY layer initialized
[ 10.696891] Bluetooth: RFCOMM socket layer initialized
[ 10.696892] Bluetooth: RFCOMM ver 1.11
[ 10.770943] lp: driver loaded but no devices found
[ 10.774986] ppdev: user-space parallel port driver
[ 10.812895] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.812897] Bluetooth: BNEP filters: protocol multicast
[ 10.879204] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 11.218987] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.345220] r8169 0000:03:00.0: eth0: link down
[ 11.346471] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.399996] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 13.477376] wlan0: authenticate with 00:1d:19:ad:db:71 (try 1)
[ 13.479640] wlan0: authenticated
[ 13.499768] wlan0: associate with 00:1d:19:ad:db:71 (try 1)
[ 13.502806] wlan0: RX AssocResp from 00:1d:19:ad:db:71 (capab=0x431 status=0
aid=1)
[ 13.502820] wlan0: associated
[ 13.504093] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 13.504172] cfg80211: Calling CRDA for country: FI
[ 13.507191] cfg80211: Regulatory domain changed to country: FI
[ 13.507194] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 13.507196] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[ 13.507199] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[ 13.507200] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[ 13.507202] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A,
2700 mBm)
[ 24.337072] wlan0: no IPv6 routers present
[ 353.900110] packagekitd[3536] trap int3 ip:7fd0e9549341 sp:7fffcefa3580
error:0
** Model information
sys_vendor: ECS
product_name: G11-21ENS6BE
product_version: 1.0
chassis_vendor: ECS
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: 4.6.4
board_vendor: ECS
board_name: H61H-G11
board_version: 1.0
** Loaded modules:
bnep
parport_pc
ppdev
lp
parport
rfcomm
bluetooth
pci_stub
vboxpci(O)
vboxnetadp(O)
cpufreq_conservative
cpufreq_userspace
cpufreq_stats
cpufreq_powersave
vboxnetflt(O)
vboxdrv(O)
binfmt_misc
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
snd_hda_codec_hdmi
snd_hda_codec_realtek
uvcvideo
videodev
v4l2_compat_ioctl32
snd_usb_audio
snd_usbmidi_lib
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
joydev
media
hid_a4tech
arc4
coretemp
crc32c_intel
snd_hda_intel
snd_hda_codec
acpi_cpufreq
rtl8192ce
snd_hwdep
mperf
rtlwifi
ghash_clmulni_intel
snd_pcm
snd_page_alloc
rtl8192c_common
snd_seq
mac80211
snd_seq_device
aesni_intel
aes_x86_64
snd_timer
cfg80211
i915
aes_generic
rfkill
snd
cryptd
video
drm_kms_helper
soundcore
evdev
iTCO_wdt
iTCO_vendor_support
drm
i2c_algo_bit
pcspkr
i2c_i801
i2c_core
processor
button
thermal_sys
ext4
crc16
jbd2
mbcache
sg
sr_mod
sd_mod
cdrom
crc_t10dif
hid_logitech_dj
usbhid
hid
ata_generic
ata_piix
ehci_hcd
libata
usbcore
scsi_mod
usb_common
r8169
mii
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor
Family DRAM Controller [8086:0100] (rev 09)
Subsystem: Elitegroup Computer Systems Device [1019:0777]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller [8086:0102] (rev 09) (prog-if
00 [VGA controller])
Subsystem: Elitegroup Computer Systems Device [1019:0777]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fe000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Elitegroup Computer Systems Device [1019:0777]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fe507000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems Device [1019:0777]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe506000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset
Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: Elitegroup Computer Systems Device [1019:0777]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fe500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 3 [8086:1c14] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fe400000-fe4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems Device [1019:0777]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe505000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation H61 Express Chipset Family LPC
Controller [8086:1c5c] (rev 05)
Subsystem: Elitegroup Computer Systems Device [1019:0777]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 6 Series/C200 Series Chipset
Family 4 port SATA IDE Controller [8086:1c00] (rev 05) (prog-if 8a [Master SecP
PriP])
Subsystem: Elitegroup Computer Systems Device [1019:0777]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f0d0 [size=16]
Region 5: I/O ports at f0c0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family
SMBus Controller [8086:1c22] (rev 05)
Subsystem: Elitegroup Computer Systems Device [1019:0777]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe504000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 6 Series/C200 Series Chipset
Family 2 port SATA IDE Controller [8086:1c08] (rev 05) (prog-if 85 [Master SecO
PriO])
Subsystem: Elitegroup Computer Systems Device [1019:0777]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f070 [size=16]
Region 5: I/O ports at f060 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE
802.11b/g/n WiFi Adapter [10ec:8176] (rev 01)
Subsystem: AzureWave AW-NE139H Half-size Mini PCIe Card [1a3b:1139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at fe400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: rtl8192ce
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: Elitegroup Computer Systems Device [1019:811e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at d0004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 09da:000a A4 Tech Co., Ltd Optical Mouse Opto 510D
Bus 002 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 002 Device 004: ID 058f:3832 Alcor Micro Corp.
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-3-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-3-amd64 depends on:
ii debconf [debconf-2.0] 1.5.46
ii initramfs-tools [linux-initramfs-tool] 0.107
ii kmod 9-1
ii linux-base 3.5
ii module-init-tools 9-1
Versions of packages linux-image-3.2.0-3-amd64 recommends:
ii firmware-linux-free 3.1
Versions of packages linux-image-3.2.0-3-amd64 suggests:
pn debian-kernel-handbook <none>
ii extlinux 2:4.05+dfsg-6
ii grub-pc 1.99-22.1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-3-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-3-amd64/postinst/depmod-error-initrd-3.2.0-3-amd64: false
linux-image-3.2.0-3-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-3-amd64/postinst/missing-firmware-3.2.0-3-amd64:
linux-image-3.2.0-3-amd64/prerm/removing-running-kernel-3.2.0-3-amd64: true
--
To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
