--- Begin Message ---
Package: lvm2
Version: 2.02.66-5
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts piuparts.d.o
Hi,
during a test with piuparts I noticed your package failed to install due to
insserv rejecting the script header. Some notes are
available from at http://wiki.debian.org/LSBInitScripts
From the attached log (scroll to the bottom...):
Selecting previously deselected package lvm2.
Unpacking lvm2 (from .../lvm2_2.02.66-5_amd64.deb) ...
Setting up libudev0 (164-3) ...
Setting up libreadline5 (5.2-7) ...
Setting up dmsetup (2:1.02.48-5) ...
Setting up libdevmapper1.02.1 (2:1.02.48-5) ...
Setting up lvm2 (2.02.66-5) ...
invoke-rc.d: policy-rc.d denied execution of start.
insserv: Service udev has to be enabled to start service lvm2
insserv: exiting now!
update-rc.d: error: insserv rejected the script header
dpkg: error processing lvm2 (--configure):
subprocess installed post-installation script returned error exit status 1
configured to not write apport reports
Errors were encountered while processing:
lvm2
E: Sub-process /usr/bin/dpkg returned an error code (1)
cheers,
Holger
Start: 2012-01-04 17:02:51 UTC
Package: lvm2
Version: 2.02.88-2
Installed-Size: 1179
Maintainer: Debian LVM Team <pkg-lvm-maintain...@lists.alioth.debian.org>
Architecture: amd64
Depends: libc6 (>= 2.3.3), libdevmapper1.02.1 (>= 2:1.02.67), libreadline5 (>= 5.2), libudev0 (>= 0.140), lsb-base, dmsetup (>> 2:1.02.47), initscripts (>= 2.88dsf-13.3)
Breaks: initramfs-tools (<< 0.99)
Description: Linux Logical Volume Manager
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Homepage: http://sources.redhat.com/lvm2/
Tag: admin::filesystem, interface::commandline, role::program, scope::utility, uitoolkit::ncurses
Section: admin
Priority: optional
Filename: pool/main/l/lvm2/lvm2_2.02.88-2_amd64.deb
Size: 522488
MD5sum: 52f0c53f4271079e968839985fb07822
SHA1: 57facd8a3ef45a0c26bd4b60c853c49ff5fecee3
SHA256: dea4b9f5a9e0c7d3a3bb40b477c8fc355e821c91658068f5f5b64a5672e0ff61
Executing: sudo /org/piuparts.debian.org/sbin/piuparts --warn-on-others --warn-on-leftovers-after-purge --skip-logrotatefiles-test --no-eatmydata --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ab squeeze.tar.gz -d squeeze -d wheezy --mirror http://piatti.debian.org/debian/ lvm2
Guessed: debian
0m0.0s INFO: ------------------------------------------------------------------------------
0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile.
0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ
0m0.0s INFO: ------------------------------------------------------------------------------
0m0.0s INFO: piuparts version 0.43~201201021122~0.42-4-g042b5ab starting up.
0m0.0s INFO: Command line arguments: /org/piuparts.debian.org/sbin/piuparts --warn-on-others --warn-on-leftovers-after-purge --skip-logrotatefiles-test --no-eatmydata --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ab squeeze.tar.gz -d squeeze -d wheezy --mirror http://piatti.debian.org/debian/ lvm2
0m0.0s INFO: Running on: Linux piatti 2.6.32-5-amd64 #1 SMP Thu Nov 3 03:41:26 UTC 2011 x86_64
0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpmnEyDe
0m0.0s DEBUG: Unpacking squeeze.tar.gz into /org/piuparts.debian.org/tmp/tmpmnEyDe
0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpmnEyDe', '-zxf', 'squeeze.tar.gz']
0m2.6s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpmnEyDe', '-zxf', 'squeeze.tar.gz']
0m2.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpmnEyDe', 'mount', '-t', 'proc', 'proc', '/proc']
0m2.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpmnEyDe', 'mount', '-t', 'proc', 'proc', '/proc']
0m2.6s DEBUG: Created policy-rc.d and chmodded it.
0m2.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpmnEyDe', 'apt-get', 'update']
0m2.7s DUMP:
Hit http://piatti.debian.org squeeze Release.gpg
Ign http://piatti.debian.org/debian/ squeeze/contrib Translation-en
Ign http://piatti.debian.org/debian/ squeeze/main Translation-en
Ign http://piatti.debian.org/debian/ squeeze/non-free Translation-en
Hit http://piatti.debian.org squeeze Release
Hit http://piatti.debian.org squeeze/main amd64 Packages
Hit http://piatti.debian.org squeeze/contrib amd64 Packages
Hit http://piatti.debian.org squeeze/non-free amd64 Packages
Reading package lists...
0m2.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpmnEyDe', 'apt-get', 'update']
0m2.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpmnEyDe', 'apt-get', '-yf', 'upgrade']
0m3.0s DUMP:
Reading package lists...
Building dependency tree...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
0m3.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpmnEyDe', 'apt-get', '-yf', 'upgrade']
0m3.0s DEBUG: Copying scriptsdir /etc/piuparts/scripts/ to /org/piuparts.debian.org/tmp/tmpmnEyDe/tmp/scripts/
0m3.0s INFO: Running scripts post_setup
0m3.0s DEBUG: Upgrading /org/piuparts.debian.org/tmp/tmpmnEyDe to wheezy
0m3.0s INFO: Running scripts pre_distupgrade
0m3.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpmnEyDe', 'apt-get', 'update']
0m12.1s DUMP:
Get:1 http://piatti.debian.org wheezy Release.gpg [836 B]
Ign http://piatti.debian.org/debian/ wheezy/contrib Translation-en
Ign http://piatti.debian.org/debian/ wheezy/main Translation-en
Ign http://piatti.debian.org/debian/ wheezy/non-free Translation-en
Get:2 http://piatti.debian.org wheezy Release [176 kB]
Get:3 http://piatti.debian.org wheezy/main amd64 Packages [10.0 MB]
Get:4 http://piatti.debian.org wheezy/contrib amd64 Packages [75.9 kB]
Get:5 http://piatti.debian.org wheezy/non-free amd64 Packages [132 kB]
Fetched 10.4 MB in 1s (7477 kB/s)
Reading package lists...
0m12.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpmnEyDe', 'apt-get', 'update']
0m12.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpmnEyDe', 'apt-get', '-yf', 'dist-upgrade']
0m37.7s DUMP:
Reading package lists...
Building dependency tree...
The following NEW packages will be installed:
gcc-4.6-base libdb5.1 liblzma5 libmount1 libpam-modules-bin libtinfo5
multiarch-support
The following packages will be upgraded:
apt base-files base-passwd bash bsdutils coreutils dash debconf debconf-i18n
debianutils diffutils dpkg e2fslibs e2fsprogs gcc-4.4-base gnupg gpgv grep
gzip hostname initscripts insserv libacl1 libattr1 libblkid1 libbz2-1.0
libc-bin libc6 libcomerr2 libdb4.8 libgcc1 liblocale-gettext-perl
libncurses5 libpam-modules libpam-runtime libpam0g libreadline6 libselinux1
libsepol1 libslang2 libss2 libstdc++6 libtext-charwidth-perl
libtext-iconv-perl libusb-0.1-4 libuuid1 login lsb-base mawk mount
ncurses-base ncurses-bin passwd perl-base readline-common sed sensible-utils
sysv-rc sysvinit sysvinit-utils tar tzdata util-linux xz-utils
64 upgraded, 7 newly installed, 0 to remove and 0 not upgraded.
Need to get 34.8 MB of archives.
After this operation, 3767 kB disk space will be freed.
Get:1 http://piatti.debian.org/debian/ wheezy/main sensible-utils all 0.0.6 [6428 B]
Get:2 http://piatti.debian.org/debian/ wheezy/main debianutils amd64 4.1 [76.6 kB]
Get:3 http://piatti.debian.org/debian/ wheezy/main libc-bin amd64 2.13-23 [1259 kB]
Get:4 http://piatti.debian.org/debian/ wheezy/main libc6 amd64 2.13-23 [4322 kB]
Get:5 http://piatti.debian.org/debian/ wheezy/main gcc-4.6-base amd64 4.6.2-9 [137 kB]
Get:6 http://piatti.debian.org/debian/ wheezy/main multiarch-support amd64 2.13-23 [144 kB]
Get:7 http://piatti.debian.org/debian/ wheezy/main libgcc1 amd64 1:4.6.2-9 [42.9 kB]
Get:8 http://piatti.debian.org/debian/ wheezy/main insserv amd64 1.14.0-2.1 [69.6 kB]
Get:9 http://piatti.debian.org/debian/ wheezy/main debconf all 1.5.41 [167 kB]
Get:10 http://piatti.debian.org/debian/ wheezy/main libselinux1 amd64 2.1.0-4 [87.5 kB]
Get:11 http://piatti.debian.org/debian/ wheezy/main sysvinit-utils amd64 2.88dsf-13.13 [126 kB]
Get:12 http://piatti.debian.org/debian/ wheezy/main sysv-rc all 2.88dsf-13.13 [78.8 kB]
Get:13 http://piatti.debian.org/debian/ wheezy/main libpam0g amd64 1.1.3-6 [123 kB]
Get:14 http://piatti.debian.org/debian/ wheezy/main libdb5.1 amd64 5.1.25-11 [715 kB]
Get:15 http://piatti.debian.org/debian/ wheezy/main libpam-modules-bin amd64 1.1.3-6 [112 kB]
Get:16 http://piatti.debian.org/debian/ wheezy/main libpam-modules amd64 1.1.3-6 [347 kB]
Get:17 http://piatti.debian.org/debian/ wheezy/main passwd amd64 1:4.1.4.2+svn3283-3 [1110 kB]
Get:18 http://piatti.debian.org/debian/ wheezy/main libuuid1 amd64 2.19.1-5 [60.1 kB]
Get:19 http://piatti.debian.org/debian/ wheezy/main libblkid1 amd64 2.19.1-5 [120 kB]
Get:20 http://piatti.debian.org/debian/ wheezy/main libsepol1 amd64 2.1.0-1.2 [137 kB]
Get:21 http://piatti.debian.org/debian/ wheezy/main libmount1 amd64 2.19.1-5 [111 kB]
Get:22 http://piatti.debian.org/debian/ wheezy/main mount amd64 2.19.1-5 [206 kB]
Get:23 http://piatti.debian.org/debian/ wheezy/main dpkg amd64 1.16.1.2 [2219 kB]
Get:24 http://piatti.debian.org/debian/ wheezy/main sed amd64 4.2.1-9 [252 kB]
Get:25 http://piatti.debian.org/debian/ wheezy/main libtinfo5 amd64 5.9-4 [273 kB]
Get:26 http://piatti.debian.org/debian/ wheezy/main ncurses-bin amd64 5.9-4 [334 kB]
Get:27 http://piatti.debian.org/debian/ wheezy/main lsb-base all 3.2-28 [21.2 kB]
Get:28 http://piatti.debian.org/debian/ wheezy/main libattr1 amd64 1:2.4.46-5 [19.0 kB]
Get:29 http://piatti.debian.org/debian/ wheezy/main libacl1 amd64 2.2.51-5 [29.4 kB]
Get:30 http://piatti.debian.org/debian/ wheezy/main coreutils amd64 8.13-3 [5524 kB]
Get:31 http://piatti.debian.org/debian/ wheezy/main initscripts amd64 2.88dsf-13.13 [77.2 kB]
Get:32 http://piatti.debian.org/debian/ wheezy/main base-files amd64 6.5 [69.2 kB]
Get:33 http://piatti.debian.org/debian/ wheezy/main bash amd64 4.2-1 [1495 kB]
Get:34 http://piatti.debian.org/debian/ wheezy/main dash amd64 0.5.7-2 [112 kB]
Get:35 http://piatti.debian.org/debian/ wheezy/main diffutils amd64 1:3.2-1 [364 kB]
Get:36 http://piatti.debian.org/debian/ wheezy/main libcomerr2 amd64 1.42-1 [53.7 kB]
Get:37 http://piatti.debian.org/debian/ wheezy/main e2fslibs amd64 1.42-1 [185 kB]
Get:38 http://piatti.debian.org/debian/ wheezy/main e2fsprogs amd64 1.42-1 [962 kB]
Get:39 http://piatti.debian.org/debian/ wheezy/main grep amd64 2.10-1 [415 kB]
Get:40 http://piatti.debian.org/debian/ wheezy/main gzip amd64 1.4-2 [103 kB]
Get:41 http://piatti.debian.org/debian/ wheezy/main hostname amd64 3.06 [15.7 kB]
Get:42 http://piatti.debian.org/debian/ wheezy/main login amd64 1:4.1.4.2+svn3283-3 [791 kB]
Get:43 http://piatti.debian.org/debian/ wheezy/main libtext-charwidth-perl amd64 0.04-7+b1 [11.2 kB]
Get:44 http://piatti.debian.org/debian/ wheezy/main libtext-iconv-perl amd64 1.7-5 [17.6 kB]
Get:45 http://piatti.debian.org/debian/ wheezy/main perl-base amd64 5.14.2-6 [1506 kB]
Get:46 http://piatti.debian.org/debian/ wheezy/main liblocale-gettext-perl amd64 1.05-7+b1 [20.4 kB]
Get:47 http://piatti.debian.org/debian/ wheezy/main sysvinit amd64 2.88dsf-13.13 [123 kB]
Get:48 http://piatti.debian.org/debian/ wheezy/main tar amd64 1.26-3 [980 kB]
Get:49 http://piatti.debian.org/debian/ wheezy/main tzdata all 2011n-1 [434 kB]
Get:50 http://piatti.debian.org/debian/ wheezy/main util-linux amd64 2.19.1-5 [604 kB]
Get:51 http://piatti.debian.org/debian/ wheezy/main base-passwd amd64 3.5.24 [45.7 kB]
Get:52 http://piatti.debian.org/debian/ wheezy/main bsdutils amd64 1:2.19.1-5 [81.6 kB]
Get:53 http://piatti.debian.org/debian/ wheezy/main ncurses-base all 5.9-4 [197 kB]
Get:54 http://piatti.debian.org/debian/ wheezy/main libstdc++6 amd64 4.6.2-9 [330 kB]
Get:55 http://piatti.debian.org/debian/ wheezy/main libbz2-1.0 amd64 1.0.6-1 [45.4 kB]
Get:56 http://piatti.debian.org/debian/ wheezy/main readline-common all 6.2-8 [55.3 kB]
Get:57 http://piatti.debian.org/debian/ wheezy/main libreadline6 amd64 6.2-8 [166 kB]
Get:58 http://piatti.debian.org/debian/ wheezy/main libusb-0.1-4 amd64 2:0.1.12-19 [22.3 kB]
Get:59 http://piatti.debian.org/debian/ wheezy/main gpgv amd64 1.4.11-3 [222 kB]
Get:60 http://piatti.debian.org/debian/ wheezy/main gnupg amd64 1.4.11-3 [2118 kB]
Get:61 http://piatti.debian.org/debian/ wheezy/main apt amd64 0.8.15.9 [2194 kB]
Get:62 http://piatti.debian.org/debian/ wheezy/main libslang2 amd64 2.2.4-5 [575 kB]
Get:63 http://piatti.debian.org/debian/ wheezy/main liblzma5 amd64 5.1.1alpha+20110809-3 [197 kB]
Get:64 http://piatti.debian.org/debian/ wheezy/main libncurses5 amd64 5.9-4 [297 kB]
Get:65 http://piatti.debian.org/debian/ wheezy/main libss2 amd64 1.42-1 [58.7 kB]
Get:66 http://piatti.debian.org/debian/ wheezy/main mawk amd64 1.3.3-16 [90.4 kB]
Get:67 http://piatti.debian.org/debian/ wheezy/main libdb4.8 amd64 4.8.30-11 [694 kB]
Get:68 http://piatti.debian.org/debian/ wheezy/main libpam-runtime all 1.1.3-6 [225 kB]
Get:69 http://piatti.debian.org/debian/ wheezy/main xz-utils amd64 5.1.1alpha+20110809-3 [229 kB]
Get:70 http://piatti.debian.org/debian/ wheezy/main debconf-i18n all 1.5.41 [229 kB]
Get:71 http://piatti.debian.org/debian/ wheezy/main gcc-4.4-base amd64 4.4.6-14 [126 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 34.8 MB in 0s (45.2 MB/s)
(Reading database ... 6143 files and directories currently installed.)
Preparing to replace sensible-utils 0.0.4 (using .../sensible-utils_0.0.6_all.deb) ...
Unpacking replacement sensible-utils ...
Setting up sensible-utils (0.0.6) ...
(Reading database ... 6146 files and directories currently installed.)
Preparing to replace debianutils 3.4 (using .../debianutils_4.1_amd64.deb) ...
Unpacking replacement debianutils ...
Setting up debianutils (4.1) ...
(Reading database ... 6172 files and directories currently installed.)
Preparing to replace libc-bin 2.11.2-10 (using .../libc-bin_2.13-23_amd64.deb) ...
Unpacking replacement libc-bin ...
Setting up libc-bin (2.13-23) ...
(Reading database ... 6188 files and directories currently installed.)
Preparing to replace libc6 2.11.2-10 (using .../libc6_2.13-23_amd64.deb) ...
Checking for services that may need to be restarted...
Checking init scripts...
Unpacking replacement libc6 ...
Setting up libc6 (2.13-23) ...
Checking for services that may need to be restarted...
Checking init scripts...
Nothing to restart.
Selecting previously deselected package gcc-4.6-base.
(Reading database ... 6193 files and directories currently installed.)
Unpacking gcc-4.6-base (from .../gcc-4.6-base_4.6.2-9_amd64.deb) ...
Setting up gcc-4.6-base (4.6.2-9) ...
Selecting previously deselected package multiarch-support.
(Reading database ... 6202 files and directories currently installed.)
Unpacking multiarch-support (from .../multiarch-support_2.13-23_amd64.deb) ...
Setting up multiarch-support (2.13-23) ...
(Reading database ... 6206 files and directories currently installed.)
Preparing to replace libgcc1 1:4.4.5-8 (using .../libgcc1_1%3a4.6.2-9_amd64.deb) ...
Unpacking replacement libgcc1 ...
Setting up libgcc1 (1:4.6.2-9) ...
(Reading database ... 6206 files and directories currently installed.)
Preparing to replace insserv 1.14.0-2 (using .../insserv_1.14.0-2.1_amd64.deb) ...
Unpacking replacement insserv ...
Setting up insserv (1.14.0-2.1) ...
Installing new version of config file /etc/insserv.conf ...
(Reading database ... 6206 files and directories currently installed.)
Preparing to replace debconf 1.5.36.1 (using .../debconf_1.5.41_all.deb) ...
Unpacking replacement debconf ...
Setting up debconf (1.5.41) ...
(Reading database ... 6208 files and directories currently installed.)
Preparing to replace libselinux1 2.0.96-1 (using .../libselinux1_2.1.0-4_amd64.deb) ...
Unpacking replacement libselinux1 ...
Setting up libselinux1 (2.1.0-4) ...
(Reading database ... 6208 files and directories currently installed.)
Preparing to replace sysvinit-utils 2.88dsf-13.1 (using .../sysvinit-utils_2.88dsf-13.13_amd64.deb) ...
Unpacking replacement sysvinit-utils ...
Setting up sysvinit-utils (2.88dsf-13.13) ...
(Reading database ... 6208 files and directories currently installed.)
Preparing to replace sysv-rc 2.88dsf-13.1 (using .../sysv-rc_2.88dsf-13.13_all.deb) ...
Unpacking replacement sysv-rc ...
Setting up sysv-rc (2.88dsf-13.13) ...
(Reading database ... 6208 files and directories currently installed.)
Preparing to replace libpam0g 1.1.1-6.1 (using .../libpam0g_1.1.3-6_amd64.deb) ...
Unpacking replacement libpam0g ...
Setting up libpam0g (1.1.3-6) ...
Checking for services that may need to be restarted...Checking init scripts...
Nothing to restart.
Selecting previously deselected package libdb5.1.
(Reading database ... 6208 files and directories currently installed.)
Unpacking libdb5.1 (from .../libdb5.1_5.1.25-11_amd64.deb) ...
Setting up libdb5.1 (5.1.25-11) ...
Selecting previously deselected package libpam-modules-bin.
(Reading database ... 6214 files and directories currently installed.)
Unpacking libpam-modules-bin (from .../libpam-modules-bin_1.1.3-6_amd64.deb) ...
Replacing files in old package libpam-modules ...
Setting up libpam-modules-bin (1.1.3-6) ...
(Reading database ... 6220 files and directories currently installed.)
Preparing to replace libpam-modules 1.1.1-6.1 (using .../libpam-modules_1.1.3-6_amd64.deb) ...
Unpacking replacement libpam-modules ...
Setting up libpam-modules (1.1.3-6) ...
Installing new version of config file /etc/security/group.conf ...
(Reading database ... 6219 files and directories currently installed.)
Preparing to replace passwd 1:4.1.4.2+svn3283-2+squeeze1 (using .../passwd_1%3a4.1.4.2+svn3283-3_amd64.deb) ...
Unpacking replacement passwd ...
Setting up passwd (1:4.1.4.2+svn3283-3) ...
(Reading database ... 6219 files and directories currently installed.)
Preparing to replace libuuid1 2.17.2-9 (using .../libuuid1_2.19.1-5_amd64.deb) ...
Unpacking replacement libuuid1 ...
Setting up libuuid1 (2.19.1-5) ...
(Reading database ... 6219 files and directories currently installed.)
Preparing to replace libblkid1 2.17.2-9 (using .../libblkid1_2.19.1-5_amd64.deb) ...
Unpacking replacement libblkid1 ...
Setting up libblkid1 (2.19.1-5) ...
(Reading database ... 6219 files and directories currently installed.)
Preparing to replace libsepol1 2.0.41-1 (using .../libsepol1_2.1.0-1.2_amd64.deb) ...
Unpacking replacement libsepol1 ...
Setting up libsepol1 (2.1.0-1.2) ...
Selecting previously deselected package libmount1.
(Reading database ... 6219 files and directories currently installed.)
Unpacking libmount1 (from .../libmount1_2.19.1-5_amd64.deb) ...
Setting up libmount1 (2.19.1-5) ...
(Reading database ... 6225 files and directories currently installed.)
Preparing to replace mount 2.17.2-9 (using .../mount_2.19.1-5_amd64.deb) ...
Unpacking replacement mount ...
Setting up mount (2.19.1-5) ...
(Reading database ... 6227 files and directories currently installed.)
Preparing to replace dpkg 1.15.8.11 (using .../dpkg_1.16.1.2_amd64.deb) ...
Unpacking replacement dpkg ...
Setting up dpkg (1.16.1.2) ...
(Reading database ... 6223 files and directories currently installed.)
Preparing to replace sed 4.2.1-7 (using .../archives/sed_4.2.1-9_amd64.deb) ...
Unpacking replacement sed ...
Setting up sed (4.2.1-9) ...
Selecting previously unselected package libtinfo5.
(Reading database ... 6223 files and directories currently installed.)
Unpacking libtinfo5 (from .../libtinfo5_5.9-4_amd64.deb) ...
Setting up libtinfo5 (5.9-4) ...
(Reading database ... 6231 files and directories currently installed.)
Preparing to replace ncurses-bin 5.7+20100313-5 (using .../ncurses-bin_5.9-4_amd64.deb) ...
Unpacking replacement ncurses-bin ...
Setting up ncurses-bin (5.9-4) ...
(Reading database ... 6232 files and directories currently installed.)
Preparing to replace lsb-base 3.2-23.2squeeze1 (using .../lsb-base_3.2-28_all.deb) ...
Unpacking replacement lsb-base ...
Setting up lsb-base (3.2-28) ...
(Reading database ... 6232 files and directories currently installed.)
Preparing to replace libattr1 1:2.4.44-2 (using .../libattr1_1%3a2.4.46-5_amd64.deb) ...
Unpacking replacement libattr1 ...
Setting up libattr1 (1:2.4.46-5) ...
(Reading database ... 6233 files and directories currently installed.)
Preparing to replace libacl1 2.2.49-4 (using .../libacl1_2.2.51-5_amd64.deb) ...
Unpacking replacement libacl1 ...
Setting up libacl1 (2.2.51-5) ...
(Reading database ... 6233 files and directories currently installed.)
Preparing to replace coreutils 8.5-1 (using .../coreutils_8.13-3_amd64.deb) ...
Unpacking replacement coreutils ...
Setting up coreutils (8.13-3) ...
(Reading database ... 6154 files and directories currently installed.)
Preparing to replace initscripts 2.88dsf-13.1 (using .../initscripts_2.88dsf-13.13_amd64.deb) ...
Unpacking replacement initscripts ...
Setting up initscripts (2.88dsf-13.13) ...
Installing new version of config file /etc/init.d/bootlogs ...
Installing new version of config file /etc/init.d/bootmisc.sh ...
Installing new version of config file /etc/init.d/checkfs.sh ...
Installing new version of config file /etc/init.d/checkroot.sh ...
Installing new version of config file /etc/init.d/mountdevsubfs.sh ...
Installing new version of config file /etc/init.d/mountkernfs.sh ...
Installing new version of config file /etc/init.d/mtab.sh ...
Installing new version of config file /etc/init.d/sendsigs ...
Installing new version of config file /etc/init.d/umountfs ...
Installing new version of config file /etc/init.d/umountnfs.sh ...
Installing new version of config file /etc/init.d/umountroot ...
Installing new version of config file /etc/default/tmpfs ...
Installing new version of config file /etc/network/if-up.d/mountnfs ...
guest environment detected: Linking /run to /var/run
guest environment detected: Linking /run/lock to /var/lock
guest environment detected: Linking /run/shm to /dev/shm
(Reading database ... 6155 files and directories currently installed.)
Preparing to replace base-files 6.0squeeze3 (using .../base-files_6.5_amd64.deb) ...
Unpacking replacement base-files ...
Setting up base-files (6.5) ...
Installing new version of config file /etc/debian_version ...
Installing new version of config file /etc/issue ...
Installing new version of config file /etc/issue.net ...
(Reading database ... 6155 files and directories currently installed.)
Preparing to replace bash 4.1-3 (using .../archives/bash_4.2-1_amd64.deb) ...
Unpacking replacement bash ...
Setting up bash (4.2-1) ...
Installing new version of config file /etc/bash.bashrc ...
Installing new version of config file /etc/skel/.bashrc ...
update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode.
(Reading database ... 6158 files and directories currently installed.)
Preparing to replace dash 0.5.5.1-7.4 (using .../dash_0.5.7-2_amd64.deb) ...
Unpacking replacement dash ...
Setting up dash (0.5.7-2) ...
(Reading database ... 6158 files and directories currently installed.)
Preparing to replace diffutils 1:3.0-1 (using .../diffutils_1%3a3.2-1_amd64.deb) ...
Unpacking replacement diffutils ...
Setting up diffutils (1:3.2-1) ...
(Reading database ... 6159 files and directories currently installed.)
Preparing to replace libcomerr2 1.41.12-4stable1 (using .../libcomerr2_1.42-1_amd64.deb) ...
Unpacking replacement libcomerr2 ...
Setting up libcomerr2 (1.42-1) ...
(Reading database ... 6159 files and directories currently installed.)
Preparing to replace e2fslibs 1.41.12-4stable1 (using .../e2fslibs_1.42-1_amd64.deb) ...
Unpacking replacement e2fslibs ...
Setting up e2fslibs (1.42-1) ...
(Reading database ... 6159 files and directories currently installed.)
Preparing to replace e2fsprogs 1.41.12-4stable1 (using .../e2fsprogs_1.42-1_amd64.deb) ...
Unpacking replacement e2fsprogs ...
Setting up e2fsprogs (1.42-1) ...
Installing new version of config file /etc/mke2fs.conf ...
(Reading database ... 6155 files and directories currently installed.)
Preparing to replace grep 2.6.3-3 (using .../archives/grep_2.10-1_amd64.deb) ...
Unpacking replacement grep ...
Setting up grep (2.10-1) ...
(Reading database ... 6155 files and directories currently installed.)
Preparing to replace gzip 1.3.12-9 (using .../archives/gzip_1.4-2_amd64.deb) ...
Unpacking replacement gzip ...
Setting up gzip (1.4-2) ...
(Reading database ... 6154 files and directories currently installed.)
Preparing to replace hostname 3.04 (using .../hostname_3.06_amd64.deb) ...
Unpacking replacement hostname ...
Setting up hostname (3.06) ...
(Reading database ... 6154 files and directories currently installed.)
Preparing to replace login 1:4.1.4.2+svn3283-2+squeeze1 (using .../login_1%3a4.1.4.2+svn3283-3_amd64.deb) ...
Unpacking replacement login ...
Setting up login (1:4.1.4.2+svn3283-3) ...
Installing new version of config file /etc/pam.d/login ...
(Reading database ... 6154 files and directories currently installed.)
Preparing to replace libtext-charwidth-perl 0.04-6 (using .../libtext-charwidth-perl_0.04-7+b1_amd64.deb) ...
Unpacking replacement libtext-charwidth-perl ...
Preparing to replace libtext-iconv-perl 1.7-2 (using .../libtext-iconv-perl_1.7-5_amd64.deb) ...
Unpacking replacement libtext-iconv-perl ...
Preparing to replace perl-base 5.10.1-17squeeze2 (using .../perl-base_5.14.2-6_amd64.deb) ...
Unpacking replacement perl-base ...
Setting up perl-base (5.14.2-6) ...
(Reading database ... 6583 files and directories currently installed.)
Preparing to replace liblocale-gettext-perl 1.05-6 (using .../liblocale-gettext-perl_1.05-7+b1_amd64.deb) ...
Unpacking replacement liblocale-gettext-perl ...
Preparing to replace sysvinit 2.88dsf-13.1 (using .../sysvinit_2.88dsf-13.13_amd64.deb) ...
Unpacking replacement sysvinit ...
Setting up sysvinit (2.88dsf-13.13) ...
init: timeout opening/writing control channel /dev/initctl
(Reading database ... 6583 files and directories currently installed.)
Preparing to replace tar 1.23-3 (using .../archives/tar_1.26-3_amd64.deb) ...
Unpacking replacement tar ...
Setting up tar (1.26-3) ...
(Reading database ... 6584 files and directories currently installed.)
Preparing to replace tzdata 2011k-0squeeze1 (using .../tzdata_2011n-1_all.deb) ...
Unpacking replacement tzdata ...
Setting up tzdata (2011n-1) ...
Current default time zone: 'Etc/UTC'
Local time is now: Wed Jan 4 17:03:26 UTC 2012.
Universal Time is now: Wed Jan 4 17:03:26 UTC 2012.
Run 'dpkg-reconfigure tzdata' if you wish to change it.
(Reading database ... 6584 files and directories currently installed.)
Preparing to replace util-linux 2.17.2-9 (using .../util-linux_2.19.1-5_amd64.deb) ...
Unpacking replacement util-linux ...
Setting up util-linux (2.19.1-5) ...
Installing new version of config file /etc/init.d/hwclockfirst.sh ...
Installing new version of config file /etc/init.d/hwclock.sh ...
(Reading database ... 6580 files and directories currently installed.)
Preparing to replace base-passwd 3.5.22 (using .../base-passwd_3.5.24_amd64.deb) ...
Unpacking replacement base-passwd ...
Setting up base-passwd (3.5.24) ...
(Reading database ... 6582 files and directories currently installed.)
Preparing to replace bsdutils 1:2.17.2-9 (using .../bsdutils_1%3a2.19.1-5_amd64.deb) ...
Unpacking replacement bsdutils ...
Setting up bsdutils (1:2.19.1-5) ...
(Reading database ... 6582 files and directories currently installed.)
Preparing to replace ncurses-base 5.7+20100313-5 (using .../ncurses-base_5.9-4_all.deb) ...
Unpacking replacement ncurses-base ...
Setting up ncurses-base (5.9-4) ...
Installing new version of config file /etc/terminfo/README ...
(Reading database ... 6582 files and directories currently installed.)
Preparing to replace libstdc++6 4.4.5-8 (using .../libstdc++6_4.6.2-9_amd64.deb) ...
Unpacking replacement libstdc++6 ...
Setting up libstdc++6 (4.6.2-9) ...
(Reading database ... 6582 files and directories currently installed.)
Preparing to replace libbz2-1.0 1.0.5-6 (using .../libbz2-1.0_1.0.6-1_amd64.deb) ...
Unpacking replacement libbz2-1.0 ...
Setting up libbz2-1.0 (1.0.6-1) ...
(Reading database ... 6582 files and directories currently installed.)
Preparing to replace readline-common 6.1-3 (using .../readline-common_6.2-8_all.deb) ...
Unpacking replacement readline-common ...
Setting up readline-common (6.2-8) ...
(Reading database ... 6582 files and directories currently installed.)
Preparing to replace libreadline6 6.1-3 (using .../libreadline6_6.2-8_amd64.deb) ...
Unpacking replacement libreadline6 ...
Setting up libreadline6 (6.2-8) ...
(Reading database ... 6582 files and directories currently installed.)
Preparing to replace libusb-0.1-4 2:0.1.12-16 (using .../libusb-0.1-4_2%3a0.1.12-19_amd64.deb) ...
Unpacking replacement libusb-0.1-4 ...
Setting up libusb-0.1-4 (2:0.1.12-19) ...
(Reading database ... 6582 files and directories currently installed.)
Preparing to replace gpgv 1.4.10-4 (using .../gpgv_1.4.11-3_amd64.deb) ...
Unpacking replacement gpgv ...
Setting up gpgv (1.4.11-3) ...
(Reading database ... 6582 files and directories currently installed.)
Preparing to replace gnupg 1.4.10-4 (using .../gnupg_1.4.11-3_amd64.deb) ...
Unpacking replacement gnupg ...
Setting up gnupg (1.4.11-3) ...
(Reading database ... 6581 files and directories currently installed.)
Preparing to replace apt 0.8.10.3+squeeze1 (using .../apt_0.8.15.9_amd64.deb) ...
Unpacking replacement apt ...
Setting up apt (0.8.15.9) ...
Installing new version of config file /etc/apt/apt.conf.d/01autoremove ...
Installing new version of config file /etc/cron.daily/apt ...
gpg: key F42584E6: "Lenny Stable Release Key <debian-rele...@lists.debian.org>" not changed
gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) <ftpmas...@debian.org>" not changed
gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed
gpg: key B98321F9: "Squeeze Stable Release Key <debian-rele...@lists.debian.org>" not changed
gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) <ftpmas...@debian.org>" not changed
gpg: Total number processed: 5
gpg: unchanged: 5
(Reading database ... 6574 files and directories currently installed.)
Preparing to replace libslang2 2.2.2-4 (using .../libslang2_2.2.4-5_amd64.deb) ...
Unpacking replacement libslang2 ...
Setting up libslang2 (2.2.4-5) ...
Selecting previously unselected package liblzma5.
(Reading database ... 6574 files and directories currently installed.)
Unpacking liblzma5 (from .../liblzma5_5.1.1alpha+20110809-3_amd64.deb) ...
Setting up liblzma5 (5.1.1alpha+20110809-3) ...
(Reading database ... 6583 files and directories currently installed.)
Preparing to replace libncurses5 5.7+20100313-5 (using .../libncurses5_5.9-4_amd64.deb) ...
Unpacking replacement libncurses5 ...
Setting up libncurses5 (5.9-4) ...
(Reading database ... 6580 files and directories currently installed.)
Preparing to replace libss2 1.41.12-4stable1 (using .../libss2_1.42-1_amd64.deb) ...
Unpacking replacement libss2 ...
Setting up libss2 (1.42-1) ...
(Reading database ... 6580 files and directories currently installed.)
Preparing to replace mawk 1.3.3-15 (using .../mawk_1.3.3-16_amd64.deb) ...
Unpacking replacement mawk ...
Preparing to replace libdb4.8 4.8.30-2 (using .../libdb4.8_4.8.30-11_amd64.deb) ...
Unpacking replacement libdb4.8 ...
Preparing to replace libpam-runtime 1.1.1-6.1 (using .../libpam-runtime_1.1.3-6_all.deb) ...
Unpacking replacement libpam-runtime ...
Setting up libpam-runtime (1.1.3-6) ...
(Reading database ... 6581 files and directories currently installed.)
Preparing to replace xz-utils 5.0.0-2 (using .../xz-utils_5.1.1alpha+20110809-3_amd64.deb) ...
Unpacking replacement xz-utils ...
Setting up xz-utils (5.1.1alpha+20110809-3) ...
(Reading database ... 6583 files and directories currently installed.)
Preparing to replace debconf-i18n 1.5.36.1 (using .../debconf-i18n_1.5.41_all.deb) ...
Unpacking replacement debconf-i18n ...
Preparing to replace gcc-4.4-base 4.4.5-8 (using .../gcc-4.4-base_4.4.6-14_amd64.deb) ...
Unpacking replacement gcc-4.4-base ...
Setting up libtext-charwidth-perl (0.04-7+b1) ...
Setting up libtext-iconv-perl (1.7-5) ...
Setting up liblocale-gettext-perl (1.05-7+b1) ...
Setting up mawk (1.3.3-16) ...
Setting up libdb4.8 (4.8.30-11) ...
Setting up debconf-i18n (1.5.41) ...
Setting up gcc-4.4-base (4.4.6-14) ...
0m37.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpmnEyDe', 'apt-get', '-yf', 'dist-upgrade']
0m37.7s INFO: Running scripts post_distupgrade
0m37.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpmnEyDe']
0m38.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpmnEyDe']
0m38.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpmnEyDe']
0m38.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpmnEyDe']
0m38.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpmnEyDe', 'apt-get', 'clean']
0m38.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpmnEyDe', 'apt-get', 'clean']
0m38.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpmnEyDe', 'dpkg', '--get-selections', '*']
0m38.9s DUMP:
apt install
base-files install
base-passwd install
bash install
bsdutils install
coreutils install
dash install
debconf install
debconf-i18n install
debian-archive-keyring install
debianutils install
diffutils install
dpkg install
e2fslibs install
e2fsprogs install
findutils install
gcc-4.4-base install
gcc-4.6-base install
gnupg install
gpgv install
grep install
gzip install
hostname install
initscripts install
insserv install
libacl1 install
libattr1 install
libblkid1 install
libbz2-1.0 install
libc-bin install
libc6 install
libcomerr2 install
libdb4.8 install
libdb5.1 install
libgcc1 install
liblocale-gettext-perl install
liblzma2 install
liblzma5 install
libmount1 install
libncurses5 install
libpam-modules install
libpam-modules-bin install
libpam-runtime install
libpam0g install
libreadline6 install
libselinux1 install
libsepol1 install
libslang2 install
libss2 install
libstdc++6 install
libtext-charwidth-perl install
libtext-iconv-perl install
libtext-wrapi18n-perl install
libtinfo5 install
libusb-0.1-4 install
libuuid1 install
login install
lsb-base install
mawk install
mount install
multiarch-support install
ncurses-base install
ncurses-bin install
passwd install
perl-base install
readline-common install
sed install
sensible-utils install
sysv-rc install
sysvinit install
sysvinit-utils install
tar install
tzdata install
util-linux install
xz-utils install
zlib1g install
0m38.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpmnEyDe', 'dpkg', '--get-selections', '*']
0m38.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpmnEyDe', 'dpkg-divert', '--list']
0m38.9s DUMP:
diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash
diversion of /bin/sh to /bin/sh.distrib by dash
0m38.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpmnEyDe', 'dpkg-divert', '--list']
0m38.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpmnEyDe', 'umount', '/proc']
0m38.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpmnEyDe', 'umount', '/proc']
0m39.3s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpmnEyDe
0m39.3s INFO: Notice: package selections and meta data from target disto saved, now starting over from source distro. See the description of --save-end-meta and --end-meta to learn why this is neccessary and how to possibly avoid it.
0m39.3s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpOYc9px
0m39.3s DEBUG: Unpacking squeeze.tar.gz into /org/piuparts.debian.org/tmp/tmpOYc9px
0m39.3s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpOYc9px', '-zxf', 'squeeze.tar.gz']
0m41.7s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpOYc9px', '-zxf', 'squeeze.tar.gz']
0m41.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOYc9px', 'mount', '-t', 'proc', 'proc', '/proc']
0m41.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpOYc9px', 'mount', '-t', 'proc', 'proc', '/proc']
0m41.8s DEBUG: Created policy-rc.d and chmodded it.
0m41.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOYc9px', 'apt-get', 'update']
0m41.8s DUMP:
Hit http://piatti.debian.org squeeze Release.gpg
Ign http://piatti.debian.org/debian/ squeeze/contrib Translation-en
Ign http://piatti.debian.org/debian/ squeeze/main Translation-en
Ign http://piatti.debian.org/debian/ squeeze/non-free Translation-en
Hit http://piatti.debian.org squeeze Release
Hit http://piatti.debian.org squeeze/main amd64 Packages
Hit http://piatti.debian.org squeeze/contrib amd64 Packages
Hit http://piatti.debian.org squeeze/non-free amd64 Packages
Reading package lists...
0m41.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpOYc9px', 'apt-get', 'update']
0m41.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOYc9px', 'apt-get', '-yf', 'upgrade']
0m42.1s DUMP:
Reading package lists...
Building dependency tree...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
0m42.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpOYc9px', 'apt-get', '-yf', 'upgrade']
0m42.1s DEBUG: Copying scriptsdir /etc/piuparts/scripts/ to /org/piuparts.debian.org/tmp/tmpOYc9px/tmp/scripts/
0m42.1s INFO: Running scripts post_setup
0m42.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpOYc9px']
0m42.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/org/piuparts.debian.org/tmp/tmpOYc9px']
0m42.4s INFO: Running scripts pre_test
0m42.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOYc9px', 'tmp/scripts/pre_test_root_password']
0m46.4s DUMP:
Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully
0m46.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpOYc9px', 'tmp/scripts/pre_test_root_password']
0m46.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOYc9px', 'apt-cache', 'show', 'lvm2']
0m46.4s DUMP:
Package: lvm2
Priority: optional
Section: admin
Installed-Size: 1052
Maintainer: Debian LVM Team <pkg-lvm-maintain...@lists.alioth.debian.org>
Architecture: amd64
Version: 2.02.66-5
Replaces: lvm-common
Depends: libc6 (>= 2.7), libdevmapper1.02.1 (>= 2:1.02.44), libreadline5 (>= 5.2), libudev0 (>= 0.140), lsb-base, dmsetup (>> 2:1.02.47)
Conflicts: lvm-common
Breaks: grub-common (<< 1.98+20100527-1)
Filename: pool/main/l/lvm2/lvm2_2.02.66-5_amd64.deb
Size: 447984
MD5sum: 2ff9cb5a8d7616b470f1877c11df1cb8
SHA1: c470552181ebdc40aac9974480deec3e54451bbf
SHA256: 76de83730c8e49e1e2d3f9a12331953dffa133391e94af605fa90c7be77ac5d2
Description: The Linux Logical Volume Manager
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Homepage: http://sources.redhat.com/lvm2/
Tag: admin::filesystem, interface::commandline, role::program, scope::utility, uitoolkit::ncurses
0m46.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpOYc9px', 'apt-cache', 'show', 'lvm2']
0m46.4s INFO: apt-cache knows about the following packages: lvm2
0m46.4s INFO: Running scripts pre_install
0m46.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOYc9px', 'tmp/scripts/pre_install_exceptions']
0m46.4s DUMP:
Debug: running script tmp/scripts/pre_install_exceptions
0m46.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpOYc9px', 'tmp/scripts/pre_install_exceptions']
0m46.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOYc9px', 'apt-get', '-y', 'install', 'lvm2']
0m47.8s DUMP:
Reading package lists...
Building dependency tree...
The following extra packages will be installed:
dmsetup libdevmapper1.02.1 libreadline5 libudev0
The following NEW packages will be installed:
dmsetup libdevmapper1.02.1 libreadline5 libudev0 lvm2
0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
Need to get 852 kB of archives.
After this operation, 2007 kB of additional disk space will be used.
Get:1 http://piatti.debian.org/debian/ squeeze/main libudev0 amd64 164-3 [115 kB]
Get:2 http://piatti.debian.org/debian/ squeeze/main libdevmapper1.02.1 amd64 2:1.02.48-5 [85.4 kB]
Get:3 http://piatti.debian.org/debian/ squeeze/main dmsetup amd64 2:1.02.48-5 [56.7 kB]
Get:4 http://piatti.debian.org/debian/ squeeze/main libreadline5 amd64 5.2-7 [146 kB]
Get:5 http://piatti.debian.org/debian/ squeeze/main lvm2 amd64 2.02.66-5 [448 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 852 kB in 0s (1662 kB/s)
Selecting previously deselected package libudev0.
(Reading database ... 6143 files and directories currently installed.)
Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ...
Selecting previously deselected package libdevmapper1.02.1.
Unpacking libdevmapper1.02.1 (from .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ...
Selecting previously deselected package dmsetup.
Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ...
Selecting previously deselected package libreadline5.
Unpacking libreadline5 (from .../libreadline5_5.2-7_amd64.deb) ...
Selecting previously deselected package lvm2.
Unpacking lvm2 (from .../lvm2_2.02.66-5_amd64.deb) ...
Setting up libudev0 (164-3) ...
Setting up libreadline5 (5.2-7) ...
Setting up dmsetup (2:1.02.48-5) ...
Setting up libdevmapper1.02.1 (2:1.02.48-5) ...
Setting up lvm2 (2.02.66-5) ...
invoke-rc.d: policy-rc.d denied execution of start.
insserv: Service udev has to be enabled to start service lvm2
insserv: exiting now!
update-rc.d: error: insserv rejected the script header
dpkg: error processing lvm2 (--configure):
subprocess installed post-installation script returned error exit status 1
configured to not write apport reports
Errors were encountered while processing:
lvm2
E: Sub-process /usr/bin/dpkg returned an error code (1)
0m47.8s ERROR: Command failed (status=100): ['chroot', '/org/piuparts.debian.org/tmp/tmpOYc9px', 'apt-get', '-y', 'install', 'lvm2']
Reading package lists...
Building dependency tree...
The following extra packages will be installed:
dmsetup libdevmapper1.02.1 libreadline5 libudev0
The following NEW packages will be installed:
dmsetup libdevmapper1.02.1 libreadline5 libudev0 lvm2
0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
Need to get 852 kB of archives.
After this operation, 2007 kB of additional disk space will be used.
Get:1 http://piatti.debian.org/debian/ squeeze/main libudev0 amd64 164-3 [115 kB]
Get:2 http://piatti.debian.org/debian/ squeeze/main libdevmapper1.02.1 amd64 2:1.02.48-5 [85.4 kB]
Get:3 http://piatti.debian.org/debian/ squeeze/main dmsetup amd64 2:1.02.48-5 [56.7 kB]
Get:4 http://piatti.debian.org/debian/ squeeze/main libreadline5 amd64 5.2-7 [146 kB]
Get:5 http://piatti.debian.org/debian/ squeeze/main lvm2 amd64 2.02.66-5 [448 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 852 kB in 0s (1662 kB/s)
Selecting previously deselected package libudev0.
(Reading database ... 6143 files and directories currently installed.)
Unpacking libudev0 (from .../libudev0_164-3_amd64.deb) ...
Selecting previously deselected package libdevmapper1.02.1.
Unpacking libdevmapper1.02.1 (from .../libdevmapper1.02.1_2%3a1.02.48-5_amd64.deb) ...
Selecting previously deselected package dmsetup.
Unpacking dmsetup (from .../dmsetup_2%3a1.02.48-5_amd64.deb) ...
Selecting previously deselected package libreadline5.
Unpacking libreadline5 (from .../libreadline5_5.2-7_amd64.deb) ...
Selecting previously deselected package lvm2.
Unpacking lvm2 (from .../lvm2_2.02.66-5_amd64.deb) ...
Setting up libudev0 (164-3) ...
Setting up libreadline5 (5.2-7) ...
Setting up dmsetup (2:1.02.48-5) ...
Setting up libdevmapper1.02.1 (2:1.02.48-5) ...
Setting up lvm2 (2.02.66-5) ...
invoke-rc.d: policy-rc.d denied execution of start.
insserv: Service udev has to be enabled to start service lvm2
insserv: exiting now!
update-rc.d: error: insserv rejected the script header
dpkg: error processing lvm2 (--configure):
subprocess installed post-installation script returned error exit status 1
configured to not write apport reports
Errors were encountered while processing:
lvm2
E: Sub-process /usr/bin/dpkg returned an error code (1)
0m47.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOYc9px', 'umount', '/proc']
0m47.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpOYc9px', 'umount', '/proc']
0m48.2s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpOYc9px
End: 2012-01-04 17:03:40 UTC
--- End Message ---
