Package: linux-2.6
Version: 3.0.0-3
Severity: critical
Justification: breaks the whole system
Dear Maintainer,
We are experiencing randon system locks, with the following message:
Nov 2 00:04:26 euler kernel: [218436.711486] ------------[ cut here
]------------
Nov 2 00:04:26 euler kernel: [218436.711545] kernel BUG at
/build/buildd-linux-2.6_3.0.0-3-amd64-9ClimQ/linux-2.6-3.0.0/debian/build/source_amd64_none/fs/locks.c:2072!
Nov 2 00:04:26 euler kernel: [218436.711644] invalid opcode: 0000 [#1] SMP
Nov 2 00:04:26 euler kernel: [218436.711699] CPU 0
Nov 2 00:04:26 euler kernel: [218436.711706] Modules linked in: nfs fscache
parport_pc ppdev lp parport nfsd lockd nfs_acl auth_rpcgss sunrpc quota_v2
quota_tree dm_round_robin dm_multipath scsi_dh loop snd_pcm snd_timer snd
soundcore snd_page_alloc i2c_i801 i2c_core dm_mod ghes pcspkr joydev evdev hed
button video processor ext4 mbcache jbd2 crc16 sr_mod sg cdrom sd_mod
crc_t10dif usbhid hid megaraid_sas qla2xxx ahci libahci scsi_transport_fc
libata scsi_tgt ehci_hcd usbcore scsi_mod thermal fan e1000e thermal_sys [last
unloaded: scsi_wait_scan]
Nov 2 00:04:26 euler kernel: [218436.712349]
Nov 2 00:04:26 euler kernel: [218436.712388] Pid: 1767, comm: nfsd Not tainted
3.0.0-1-amd64 #1 Intel Corporation S1200BTL/S1200BTL
Nov 2 00:04:26 euler kernel: [218436.712491] RIP: 0010:[<ffffffff81130af7>]
[<ffffffff81130af7>] locks_remove_flock+0xda/0xfb
Nov 2 00:04:26 euler kernel: [218436.712583] RSP: 0018:ffff88042b0c7c30
EFLAGS: 00010246
Nov 2 00:04:26 euler kernel: [218436.712632] RAX: 0000000000000001 RBX:
ffff88042c15a9c0 RCX: 0000000000000000
Nov 2 00:04:26 euler kernel: [218436.712716] RDX: 000000000000c498 RSI:
0000000000000008 RDI: ffffffff817dab70
Nov 2 00:04:26 euler kernel: [218436.712798] RBP: ffff880422825e20 R08:
ffffffffa020b1c0 R09: 0000000000000000
Nov 2 00:04:26 euler kernel: [218436.712881] R10: 00000000000007ec R11:
00000000000007d8 R12: ffff880422825ce0
Nov 2 00:04:26 euler kernel: [218436.712963] R13: ffff880422825ce0 R14:
ffff88036f5d9080 R15: ffff88042c15a9d0
Nov 2 00:04:26 euler kernel: [218436.713046] FS: 0000000000000000(0000)
GS:ffff88043e600000(0000) knlGS:0000000000000000
Nov 2 00:04:26 euler kernel: [218436.713132] CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
Nov 2 00:04:26 euler kernel: [218436.713183] CR2: 00007f8271b09ef0 CR3:
0000000001603000 CR4: 00000000000406f0
Nov 2 00:04:26 euler kernel: [218436.713265] DR0: 0000000000000000 DR1:
0000000000000000 DR2: 0000000000000000
Nov 2 00:04:26 euler kernel: [218436.713347] DR3: 0000000000000000 DR6:
00000000ffff0ff0 DR7: 0000000000000400
Nov 2 00:04:26 euler kernel: [218436.713430] Process nfsd (pid: 1767,
threadinfo ffff88042b0c6000, task ffff88042bfff020)
Nov 2 00:04:26 euler kernel: [218436.713516] Stack:
Nov 2 00:04:26 euler kernel: [218436.713554] ffff88043e098b80
00000000000000d0 00000000000000d0 0000000000000286
Nov 2 11:50:39 euler kernel: imklog 5.8.5, log source = /proc/kmsg started.
Nov 2 11:50:39 euler kernel: [ 0.000000] Initializing cgroup subsys cpuset
Nov 2 11:50:39 euler kernel: [ 0.000000] Initializing cgroup subsys cpu
Nov 2 11:50:39 euler kernel: [ 0.000000] Linux version 3.0.0-1-amd64
(Debian 3.0.0-3) (b...@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-8) )
#1 SMP Sat Aug 27 16:21:11 UTC 2011
Nov 2 11:50:39 euler kernel: [ 0.000000] Command line:
BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64
root=UUID=6c8b6f22-ea33-4965-8e58-6f7268b5e908 ro quiet
The system is a file server, sharing a 4,5TB ext4 partition via NFS. Is was
installer a couple weeks ago (and was very stable), but it "panic-ed" twice
since it became
a file server last week.
Coincidence or not, both hangs ocurred on days of low usage (a holiday and a
weekend).
Hardware description:
CPU: Intel(R) Xeon(R) CPU E31280
Motherboard: Intel S1200BTL (Intel C204 chipset)
Memory: 16Gb
Thanks in advice!
-- Package-specific info:
** Version:
Linux version 3.0.0-1-amd64 (Debian 3.0.0-3) (b...@decadent.org.uk) (gcc
version 4.5.3 (Debian 4.5.3-8) ) #1 SMP Sat Aug 27 16:21:11 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64
root=UUID=6c8b6f22-ea33-4965-8e58-6f7268b5e908 ro quiet
** Not tainted
** Kernel log:
[ 3.264916] usb 1-1.1: New USB device found, idVendor=046b, idProduct=ff10
[ 3.264919] usb 1-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 3.264922] usb 1-1.1: Product: Virtual Keyboard and Mouse
[ 3.264925] usb 1-1.1: Manufacturer: American Megatrends Inc.
[ 3.264927] usb 1-1.1: SerialNumber: serial
[ 3.340602] input: American Megatrends Inc. Virtual Keyboard and Mouse as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input0
[ 3.340638] generic-usb 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10
Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on
usb-0000:00:1a.0-1.1/input0
[ 3.341335] input: American Megatrends Inc. Virtual Keyboard and Mouse as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input1
[ 3.341374] generic-usb 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10
Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on
usb-0000:00:1a.0-1.1/input1
[ 3.341381] usbcore: registered new interface driver usbhid
[ 3.341382] usbhid: USB HID core driver
[ 3.371833] usb 2-1.1: new low speed USB device number 3 using ehci_hcd
[ 3.529576] usb 2-1.1: New USB device found, idVendor=0e8f, idProduct=0020
[ 3.529579] usb 2-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.529582] usb 2-1.1: Product: PS2toUSB Adapter
[ 3.529584] usb 2-1.1: Manufacturer: GASIA
[ 3.532318] input: GASIA PS2toUSB Adapter as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input2
[ 3.532350] generic-usb 0003:0E8F:0020.0003: input,hidraw2: USB HID v1.10
Keyboard [GASIA PS2toUSB Adapter] on usb-0000:00:1d.0-1.1/input0
[ 3.568955] input: GASIA PS2toUSB Adapter as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input3
[ 3.569002] generic-usb 0003:0E8F:0020.0004: input,hidraw3: USB HID v1.10
Mouse [GASIA PS2toUSB Adapter] on usb-0000:00:1d.0-1.1/input1
[ 4.770745] scsi 0:2:0:0: Direct-Access INTEL RMS2AF040 2.70
PQ: 0 ANSI: 5
[ 5.949656] scsi: waiting for bus probes to complete ...
[ 5.952985] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN03
PQ: 0 ANSI: 5
[ 5.953455] scsi 1:0:0:0: Direct-Access HP P2000G3 FC/iSCSI T230
PQ: 0 ANSI: 5
[ 5.954034] sd 0:2:0:0: [sda] 1951170560 512-byte logical blocks: (998
GB/930 GiB)
[ 5.954195] sd 0:2:0:0: [sda] Write Protect is off
[ 5.954198] sd 0:2:0:0: [sda] Mode Sense: 1f 00 10 08
[ 5.954234] sd 0:2:0:0: [sda] Write cache: disabled, read cache: disabled,
supports DPO and FUA
[ 5.954948] sda: sda1 sda2 sda3 sda4
[ 5.955077] sd 1:0:0:0: [sdb] 9765624960 512-byte logical blocks: (4.99
TB/4.54 TiB)
[ 5.955358] sd 0:2:0:0: [sda] Attached SCSI disk
[ 5.955438] sd 1:0:0:0: [sdb] Write Protect is off
[ 5.955440] sd 1:0:0:0: [sdb] Mode Sense: ef 00 00 08
[ 5.955563] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 5.956053] sd 0:2:0:0: Attached scsi generic sg0 type 0
[ 5.956091] scsi 2:0:0:0: Attached scsi generic sg1 type 5
[ 5.956120] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 5.958230] scsi 1:0:1:0: Direct-Access HP P2000G3 FC/iSCSI T230
PQ: 0 ANSI: 5
[ 5.958383] sd 1:0:1:0: Attached scsi generic sg3 type 0
[ 5.966438] sd 1:0:1:0: [sdc] 9765624960 512-byte logical blocks: (4.99
TB/4.54 TiB)
[ 5.968576] sd 1:0:1:0: [sdc] Write Protect is off
[ 5.968579] sd 1:0:1:0: [sdc] Mode Sense: ef 00 00 08
[ 5.968703] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.040625] sdc: sdc1
[ 6.040683] sdb: sdb1
[ 6.041392] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 6.041419] sd 1:0:1:0: [sdc] Attached SCSI disk
[ 6.050438] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 6.050443] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.050543] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 6.987309] Btrfs loaded
[ 7.181901] PM: Starting manual resume from disk
[ 7.181903] PM: Hibernation image partition 8:2 present
[ 7.181904] PM: Looking for hibernation image.
[ 7.182077] PM: Image not found (code -22)
[ 7.182079] PM: Hibernation image not present or could not be loaded.
[ 7.193582] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 7.193584] EXT4-fs (sda1): write access will be enabled during recovery
[ 7.330090] EXT4-fs (sda1): recovery complete
[ 7.330478] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 8.730298] udevd[340]: starting version 172
[ 9.077862] ACPI: acpi_idle registered with cpuidle
[ 9.078278] Monitor-Mwait will be used to enter C-1 state
[ 9.078292] Monitor-Mwait will be used to enter C-3 state
[ 9.151046] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 9.151052] ACPI: Sleep Button [SLPB]
[ 9.151098] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 9.151101] ACPI: Power Button [PWRF]
[ 9.293369] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 9.434513] i801_smbus 0000:00:1f.3: PCI INT D -> GSI 22 (level, low) -> IRQ
22
[ 9.514284] device-mapper: uevent: version 1.0.3
[ 9.514325] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised:
dm-de...@redhat.com
[ 9.685392] Error: Driver 'pcspkr' is already registered, aborting...
[ 10.494703] Adding 3906556k swap on /dev/sda2. Priority:-1 extents:1
across:3906556k
[ 10.496883] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 10.732275] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 10.813642] loop: module loaded
[ 10.880415] device-mapper: multipath: version 1.3.0 loaded
[ 11.005612] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 49.165038] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
(null)
[ 49.199974] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts:
(null)
[ 49.415452] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts:
usrquota
[ 50.745608] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 50.801464] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 50.803813] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 54.462547] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
Rx/Tx
[ 54.464800] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 64.730173] eth0: no IPv6 routers present
[ 1202.311588] RPC: Registered named UNIX socket transport module.
[ 1202.311590] RPC: Registered udp transport module.
[ 1202.311591] RPC: Registered tcp transport module.
[ 1202.311592] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1202.368239] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 1202.849931] multipathd (1626): /proc/1626/oom_adj is deprecated, please use
/proc/1626/oom_score_adj instead.
[ 1202.870646] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 1202.921980] NFSD: starting 90-second grace period
[ 1203.276354] lp: driver loaded but no devices found
[ 1203.386344] ppdev: user-space parallel port driver
[ 1362.851082] nfsd: nfsv4 idmapping failing: has idmapd not been started?
[ 1368.374272] nfsd: nfsv4 idmapping failing: has idmapd not been started?
** Model information
sys_vendor: Intel Corporation
product_name: S1200BTL
product_version: ....................
chassis_vendor: ..............................
chassis_version: ..................
bios_vendor: Intel Corp.
bios_version: S1200BT.86B.01.00.0028.060220111153
board_vendor: Intel Corporation
board_name: S1200BTL
board_version: E98681-306
** Loaded modules:
Module Size Used by
parport_pc 22395 0
ppdev 12763 0
lp 17270 0
parport 31929 3 parport_pc,ppdev,lp
nfsd 260662 11
lockd 71503 1 nfsd
nfs_acl 12511 1 nfsd
auth_rpcgss 37204 1 nfsd
sunrpc 172969 42 nfsd,lockd,nfs_acl,auth_rpcgss
quota_v2 12959 1
quota_tree 12943 1 quota_v2
dm_round_robin 12679 2
dm_multipath 21968 2 dm_round_robin
scsi_dh 13244 1 dm_multipath
loop 22711 0
snd_pcm 68104 0
snd_timer 22581 1 snd_pcm
snd 52823 2 snd_pcm,snd_timer
soundcore 13152 1 snd
dm_mod 63164 7 dm_multipath
i2c_i801 16870 0
ghes 12988 0
snd_page_alloc 13043 1 snd_pcm
i2c_core 23909 1 i2c_i801
pcspkr 12579 0
joydev 17262 0
evdev 17558 4
hed 12611 1 ghes
button 12930 0
video 17707 0
processor 27942 8
ext4 313917 4
mbcache 13066 1 ext4
jbd2 62574 1 ext4
crc16 12343 1 ext4
btrfs 504516 0
zlib_deflate 25570 1 btrfs
crc32c 12656 1
libcrc32c 12426 1 btrfs
sr_mod 21811 0
sg 25985 0
cdrom 35093 1 sr_mod
sd_mod 36259 7
crc_t10dif 12348 1 sd_mod
usbhid 40516 0
hid 73172 1 usbhid
qla2xxx 279205 4
scsi_transport_fc 39325 1 qla2xxx
scsi_tgt 17776 1 scsi_transport_fc
ahci 25089 0
libahci 22767 1 ahci
libata 149043 2 ahci,libahci
ehci_hcd 40090 0
usbcore 128338 3 usbhid,ehci_hcd
megaraid_sas 64511 4
e1000e 124997 0
scsi_mod 162442 9
scsi_dh,sr_mod,sg,sd_mod,qla2xxx,scsi_transport_fc,scsi_tgt,libata,megaraid_sas
fan 12674 0
thermal 17426 0
thermal_sys 17949 4 video,processor,fan,thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 Processor Family
DRAM Controller [8086:0108] (rev 09)
Subsystem: Intel Corporation Device [8086:2010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:06.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core
Processor Family PCI Express Root Port [8086:010d] (rev 09) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: c0900000-c0dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network
Connection [8086:1502] (rev 05)
Subsystem: Intel Corporation Device [8086:3578]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at c1100000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at c1170000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 5040 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 0: Memory at c1160000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: c0e00000-c0ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 5 [8086:1c18] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c1000000-c10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: c0000000-c08fffff
Prefetchable memory behind bridge: 00000000c2000000-00000000c2ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c1150000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation C204 Chipset Family LPC Controller
[8086:1c54] (rev 05)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset
Family 6 port SATA AHCI Controller [8086:1c02] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 51
Region 0: I/O ports at 5090 [size=8]
Region 1: I/O ports at 5080 [size=4]
Region 2: I/O ports at 5070 [size=8]
Region 3: I/O ports at 5060 [size=4]
Region 4: I/O ports at 5020 [size=32]
Region 5: Memory at c1140000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family
SMBus Controller [8086:1c22] (rev 05)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 22
Region 0: Memory at c1130000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 5000 [size=32]
Kernel driver in use: i801_smbus
01:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID SAS 9240
[1000:0073] (rev 03)
Subsystem: Intel Corporation RMS2AF040 RAID Controller [8086:350d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 4000 [size=256]
Region 1: Memory at c0d80000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at c0d40000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at c0d00000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: megaraid_sas
02:00.0 Fibre Channel [0c04]: QLogic Corp. ISP2532-based 8Gb Fibre Channel to
PCI Express HBA [1077:2532] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:3262]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at c0f40000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at c0e00000 (64-bit, non-prefetchable) [size=1M]
Expansion ROM at c0f00000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: qla2xxx
03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network
Connection [8086:10d3]
Subsystem: Intel Corporation Device [8086:3578]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c1000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 2000 [size=32]
Region 3: Memory at c1020000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: e1000e
04:00.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200e
[Pilot] ServerEngines (SEP1) [102b:0522] (rev 04) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:0102]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c2000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at c0810000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at c0000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at c0800000 [disabled] [size=64K]
Capabilities: <access denied>
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 046b:ff10 American Megatrends, Inc.
Bus 002 Device 003: ID 0e8f:0020 GreenAsia Inc. USB to PS/2 Adapter
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.0.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.0.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.40
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.3
ii module-init-tools 3.16-1
Versions of packages linux-image-3.0.0-1-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.0.0-1-amd64 suggests:
pn grub-pc 1.99-12
pn linux-doc-3.0.0 <none>
Versions of packages linux-image-3.0.0-1-amd64 is related to:
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-qlogic 0.33
pn firmware-ralink <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.0.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.0.0-1-amd64/prerm/removing-running-kernel-3.0.0-1-amd64: true
linux-image-3.0.0-1-amd64/postinst/missing-firmware-3.0.0-1-amd64:
linux-image-3.0.0-1-amd64/postinst/depmod-error-initrd-3.0.0-1-amd64: false
--
To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
