Package: linux-2.6
Version: 2.6.32-35
Severity: grave
Justification: renders package unusable
This system is standard PC loaded with a bunch of SATA disks (15).
8 on a LSI raid card
the remaining on standard SATA port on the motherboard.
This is primarily a NAS for the LAN (Samba & netatalk).
We're getting random crash of the system (panics, GPF). Stack trace is always
different.
I tried to disable every unuseful motherboard integrated peripherals (Sound,
FireWire, USB3.0, ...).
It seems that some of them still appear in lspci, though.
I also blacklisted a bunch of module to prevent those subsystems from starting :
root@tank:~# cat /etc/modprobe.d/radeon.conf
blacklist radeon
root@tank:~# cat /etc/modprobe.d/snd.conf
blacklist snd
root@tank:~# cat /etc/modprobe.d/snd_hda_codec_atihdmi.conf
blacklist snd_hda_codec_atihdmi
root@tank:~# cat /etc/modprobe.d/snd_hda_intel.conf
blacklist snd_hda_intel
Here's the latest kernel trace I had a chance to retrieve (tail -f on
/var/log/messages through SSH) :
Message from syslogd@tank at Aug 9 11:55:49 ...
kernel:[ 2967.226046] general protection fault: 0000 [#1] SMP
Message from syslogd@tank at Aug 9 11:55:49 ...
kernel:[ 2967.226057] last sysfs file:
/sys/devices/pci0000:00/0000:00:15.0/0000:05:00.0/host9/scsi_host/host9/proc_name
Aug 9 11:55:49 tank kernel: [ 2967.226070] CPU 0
Aug 9 11:55:49 tank kernel: [ 2967.226075] Modules linked in: ip6table_filter
ip6_tables iptable_filter ip_tables ebtable_nat ebtables x_tables kvm_amd kvm
quota_v2 quota_tree bridge stp ext4 jbd2 crc16 loop snd_pcm snd_timer snd
soundcore snd_page_alloc pcspkr i2c_piix4 i2c_core k10temp evdev edac_core
edac_mce_amd shpchp pci_hotplug ext3 jbd mbcache dm_mod raid456
async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid1
md_mod sd_mod crc_t10dif ata_generic ohci_hcd pata_jmicron pata_atiixp
megaraid_sas ahci libata scsi_mod ehci_hcd r8169 mii usbcore nls_base [last
unloaded: scsi_wait_scan]
Aug 9 11:55:49 tank kernel: [ 2967.226164] Pid: 349, comm: md2_raid5 Not
tainted 2.6.32-5-amd64 #1 GA-890GPA-UD3H
Aug 9 11:55:49 tank kernel: [ 2967.226172] RIP: 0010:[<ffffffffa014600b>]
[<ffffffffa014600b>] handle_stripe+0x29/0x1785 [raid456]
Aug 9 11:55:49 tank kernel: [ 2967.226186] RSP: 0018:ffff880421855ce0 EFLAGS:
00010282
Aug 9 11:55:49 tank kernel: [ 2967.226191] RAX: 0000000000000000 RBX:
ffff880421f32120 RCX: ffff880421f32130
Aug 9 11:55:49 tank kernel: [ 2967.226196] RDX: ffff880421f3216c RSI:
0000000000000286 RDI: ffff880421855d00
Aug 9 11:55:49 tank kernel: [ 2967.226202] RBP: ffff880421f32160 R08:
ffff880422a91ce0 R09: ffff880422842000
Aug 9 11:55:49 tank kernel: [ 2967.226208] R10: 0000000000001000 R11:
ffff880421c308d0 R12: f7ff880422842000
Aug 9 11:55:49 tank kernel: [ 2967.226218] R13: 0000000000000004 R14:
ffff880421855e80 R15: ffff880422842188
Aug 9 11:55:49 tank kernel: [ 2967.226224] FS: 00007f2eb9d4f700(0000)
GS:ffff88000fa00000(0000) knlGS:0000000000000000
Aug 9 11:55:49 tank kernel: [ 2967.226232] CS: 0010 DS: 0018 ES: 0018 CR0:
000000008005003b
Aug 9 11:55:49 tank kernel: [ 2967.226237] CR2: 0000000000618d50 CR3:
000000034fd94000 CR4: 00000000000006f0
Aug 9 11:55:49 tank kernel: [ 2967.226242] DR0: 0000000000000000 DR1:
0000000000000000 DR2: 0000000000000000
Aug 9 11:55:49 tank kernel: [ 2967.226248] DR3: 0000000000000000 DR6:
00000000ffff0ff0 DR7: 0000000000000400
Aug 9 11:55:49 tank kernel: [ 2967.226253] Process md2_raid5 (pid: 349,
threadinfo ffff880421854000, task ffff880422cdcdb0)
Message from syslogd@tank at Aug 9 11:55:49 ...
kernel:[ 2967.226260] Stack:
Aug 9 11:55:49 tank kernel: [ 2967.226264] 0000000300015780 ffff880422842150
0000000000000086 ffff880422842000
Aug 9 11:55:49 tank kernel: [ 2967.226273] <0> 0000000000000000
0000000200000000 0000000000000000 0000000000000001
Aug 9 11:55:49 tank kernel: [ 2967.226283] <0> 0000000000000000
0000000000000000 0000000000000000 0000000000000000
Message from syslogd@tank at Aug 9 11:55:49 ...
kernel:[ 2967.226296] Call Trace:
Aug 9 11:55:49 tank kernel: [ 2967.226302] [<ffffffffa0147b0c>] ?
raid5d+0x3a5/0x3ee [raid456]
Aug 9 11:55:49 tank kernel: [ 2967.226310] [<ffffffff812fb53d>] ?
schedule_timeout+0x2e/0xdd
Aug 9 11:55:49 tank kernel: [ 2967.226319] [<ffffffffa00e1855>] ?
md_thread+0xf1/0x10f [md_mod]
Aug 9 11:55:49 tank kernel: [ 2967.226326] [<ffffffff81064f1a>] ?
autoremove_wake_function+0x0/0x2e
Aug 9 11:55:49 tank kernel: [ 2967.226334] [<ffffffffa00e1764>] ?
md_thread+0x0/0x10f [md_mod]
Aug 9 11:55:49 tank kernel: [ 2967.226339] [<ffffffff81064c4d>] ?
kthread+0x79/0x81
Aug 9 11:55:49 tank kernel: [ 2967.226345] [<ffffffff81011baa>] ?
child_rip+0xa/0x20
Aug 9 11:55:49 tank kernel: [ 2967.226350] [<ffffffff81064bd4>] ?
kthread+0x0/0x81
Aug 9 11:55:49 tank kernel: [ 2967.226356] [<ffffffff81011ba0>] ?
child_rip+0x0/0x20
Message from syslogd@tank at Aug 9 11:55:49 ...
kernel:[ 2967.226360] Code: 5f c3 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 8d
53 4c 48 8d 6b 40 48 81 ec 88 00 00 00 4c 8b 67 20 44 8b 6f 54 48 8d 7c 24 20
<41> 83 7c 24 1c 06 0f 85 5b 0c 00 00 48 c7 44 24 78 00 00 00 00
Aug 9 11:55:49 tank kernel: [ 2967.226426] RSP <ffff880421855ce0>
Aug 9 11:55:49 tank kernel: [ 2967.226698] ---[ end trace 636fbefe02575524 ]---
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-35) (da...@debian.org) (gcc version
4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Jun 14 09:42:28 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/tank--system-root ro noapic
acpi=off
** Not tainted
** Kernel log:
[ 2.070100] raid6: int64x8 2627 MB/s
[ 2.138110] raid6: sse2x1 1465 MB/s
[ 2.206094] raid6: sse2x2 2998 MB/s
[ 2.274077] raid6: sse2x4 6862 MB/s
[ 2.274102] raid6: using algorithm sse2x4 (6862 MB/s)
[ 2.276968] md: raid6 personality registered for level 6
[ 2.276996] md: raid5 personality registered for level 5
[ 2.277021] md: raid4 personality registered for level 4
[ 2.285516] md: md0 stopped.
[ 2.286500] md: bind<sdb1>
[ 2.286706] md: bind<sdc1>
[ 2.287892] raid1: raid set md0 active with 2 out of 2 mirrors
[ 2.287946] md0: detected capacity change from 0 to 999280640
[ 2.289259] md0: unknown partition table
[ 2.496507] md: md1 stopped.
[ 2.498243] md: bind<sdb6>
[ 2.499029] md: bind<sdc6>
[ 2.500195] raid1: raid set md1 active with 2 out of 2 mirrors
[ 2.500246] md1: detected capacity change from 0 to 229997666304
[ 2.501130] md1: unknown partition table
[ 2.734241] md: md2 stopped.
[ 2.735762] md: bind<sde1>
[ 2.738159] md: bind<sdg1>
[ 2.738377] md: bind<sdh1>
[ 2.738557] md: bind<sdd1>
[ 2.739853] raid5: md2 is not clean -- starting background reconstruction
[ 2.739890] raid5: device sdd1 operational as raid disk 0
[ 2.739917] raid5: device sdh1 operational as raid disk 3
[ 2.739943] raid5: device sdg1 operational as raid disk 2
[ 2.739968] raid5: device sde1 operational as raid disk 1
[ 2.740272] raid5: allocated 4282kB for md2
[ 2.740346] 0: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 2.740372] 3: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 2.740397] 2: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 2.740424] 1: w=4 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 2.740449] raid5: raid level 5 set md2 active with 4 out of 4 devices,
algorithm 2
[ 2.740477] RAID5 conf printout:
[ 2.740501] --- rd:4 wd:4
[ 2.740525] disk 0, o:1, dev:sdd1
[ 2.740550] disk 1, o:1, dev:sde1
[ 2.740574] disk 2, o:1, dev:sdg1
[ 2.740598] disk 3, o:1, dev:sdh1
[ 2.740649] md2: detected capacity change from 0 to 6001191813120
[ 2.741501] md2: unknown partition table
[ 2.948083] device-mapper: uevent: version 1.0.3
[ 2.948375] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-de...@redhat.com
[ 3.078080] PM: Starting manual resume from disk
[ 3.078111] PM: Resume from partition 8:21
[ 3.078112] PM: Checking hibernation image.
[ 3.078294] PM: Error -22 checking image file
[ 3.078296] PM: Resume from disk failed.
[ 3.088044] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 3.088075] EXT3-fs: write access will be enabled during recovery.
[ 3.250241] kjournald starting. Commit interval 5 seconds
[ 3.250257] EXT3-fs: recovery complete.
[ 3.250702] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.518529] udev[418]: starting version 164
[ 4.978166] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 5.029289] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.031097] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0
ss_did 0
[ 5.031132] shpchp 0000:00:01.0: Cannot reserve MMIO region
[ 5.031219] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.082394] EDAC MC: Ver: 2.1.0 Jun 14 2011
[ 5.088725] EDAC amd64_edac: Ver: 3.2.0 Jun 14 2011
[ 5.088841] EDAC amd64: This node reports that Memory ECC is currently
disabled, set F3x44[22] (0000:00:18.3).
[ 5.088885] EDAC amd64: ECC disabled in the BIOS or no ECC capability,
module will not load.
[ 5.088886] Either enable ECC checking or force module loading by setting
'ecc_enable_override'.
[ 5.088887] (Note that use of the override may cause unknown side effects.)
[ 5.088978] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 5.190964] Error: Driver 'pcspkr' is already registered, aborting...
[ 5.192160] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00,
revision 0
[ 5.658857] Adding 7811064k swap on /dev/sdb5. Priority:-1 extents:1
across:7811064k
[ 5.716077] Adding 7811064k swap on /dev/sdc5. Priority:-2 extents:1
across:7811064k
[ 5.929616] EXT3 FS on dm-0, internal journal
[ 6.035552] loop: module loaded
[ 7.968185] md: resync of RAID array md2
[ 7.968215] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 7.968240] md: using maximum available idle IO bandwidth (but not more than
200000 KB/sec) for resync.
[ 7.968272] md: using 128k window, over a total of 1953512960 blocks.
[ 20.533022] kjournald starting. Commit interval 5 seconds
[ 20.559194] EXT3 FS on md0, internal journal
[ 20.559247] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.708454] EXT4-fs (dm-2): mounted filesystem with ordered data mode
[ 20.825655] EXT4-fs (dm-1): mounted filesystem with ordered data mode
[ 20.931555] EXT4-fs (dm-3): mounted filesystem with ordered data mode
[ 20.961770] EXT4-fs (dm-4): mounted filesystem with ordered data mode
[ 21.113880] EXT4-fs (sdf1): mounted filesystem with ordered data mode
[ 21.502662] Bridge firewalling registered
[ 21.505569] device eth0 entered promiscuous mode
[ 21.506828] r8169: eth0: link up
[ 21.506863] r8169: eth0: link up
[ 21.510399] br0: port 1(eth0) entering learning state
[ 31.591383] eth0: no IPv6 routers present
[ 32.095331] br0: no IPv6 routers present
[ 36.506872] br0: port 1(eth0) entering forwarding state
[ 214.171147] kvm: Nested Virtualization enabled
[ 214.171179] kvm: Nested Paging enabled
[ 221.124303] Ebtables v2.0 registered
[ 221.215285] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 221.245189] ip6_tables: (C) 2000-2006 Netfilter Core Team
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: GA-890GPA-UD3H
product_version:
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:
bios_vendor: Award Software International, Inc.
bios_version: FF
board_vendor: Gigabyte Technology Co., Ltd.
board_name: GA-890GPA-UD3H
board_version: x.x
** Loaded modules:
Module Size Used by
ip6table_filter 2384 0
ip6_tables 15107 1 ip6table_filter
iptable_filter 2258 0
ip_tables 13915 1 iptable_filter
ebtable_nat 1588 0
ebtables 13933 1 ebtable_nat
x_tables 12845 3 ip6_tables,ip_tables,ebtables
kvm_amd 31862 0
kvm 214248 1 kvm_amd
quota_v2 2637 4
quota_tree 6051 1 quota_v2
bridge 39630 0
stp 1440 1 bridge
ext4 288318 5
jbd2 67015 1 ext4
crc16 1319 1 ext4
loop 11799 0
i2c_piix4 8328 0
i2c_core 15819 1 i2c_piix4
k10temp 2715 0
snd_pcm 60503 0
snd_timer 15582 1 snd_pcm
edac_core 29261 0
edac_mce_amd 6433 0
shpchp 26264 0
pci_hotplug 21203 1 shpchp
snd 46526 2 snd_pcm,snd_timer
soundcore 4598 1 snd
snd_page_alloc 6249 1 snd_pcm
pcspkr 1699 0
evdev 7352 1
ext3 106630 2
jbd 37085 1 ext3
mbcache 5050 2 ext4,ext3
dm_mod 53706 16
raid456 44500 1
async_raid6_recov 5170 1 raid456
async_pq 3479 2 raid456,async_raid6_recov
raid6_pq 77179 2 async_raid6_recov,async_pq
async_xor 2478 3 raid456,async_raid6_recov,async_pq
xor 4380 1 async_xor
async_memcpy 1198 2 raid456,async_raid6_recov
async_tx 1734 5
raid456,async_raid6_recov,async_pq,async_xor,async_memcpy
raid1 18431 2
md_mod 73872 5 raid456,raid1
ata_generic 3239 0
sd_mod 29921 19
crc_t10dif 1276 1 sd_mod
pata_atiixp 3489 2
megaraid_sas 30611 4
r8169 29279 0
ohci_hcd 19343 0
ehci_hcd 32081 0
ahci 32534 9
pata_jmicron 2280 0
libata 133760 4 ata_generic,pata_atiixp,ahci,pata_jmicron
usbcore 122498 3 ohci_hcd,ehci_hcd
mii 3210 1 r8169
nls_base 6377 1 usbcore
scsi_mod 126517 3 sd_mod,megaraid_sas,libata
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet static
pre-up ifconfig eth0 up
post-down ifconfig eth0 down
auto br0
iface br0 inet static
address 192.168.2.249
netmask 255.255.255.0
network 192.168.2.0
broadcast 192.168.2.255
gateway 192.168.2.1
bridge_ports eth0
bridge_stp off
bridge_maxwait 5
auto br0:230
iface br0:230 inet static
address 192.168.2.230
netmask 255.255.255.0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UNKNOWN qlen 1000
link/ether 1c:6f:65:32:4c:69 brd ff:ff:ff:ff:ff:ff
inet6 fe80::1e6f:65ff:fe32:4c69/64 scope link
valid_lft forever preferred_lft forever
3: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN
link/ether 1c:6f:65:32:4c:69 brd ff:ff:ff:ff:ff:ff
inet 192.168.2.249/24 brd 192.168.2.255 scope global br0
inet 192.168.2.230/24 brd 192.168.2.255 scope global secondary br0:230
inet6 2001:470:d080:0:1e6f:65ff:fe32:4c69/64 scope global dynamic
valid_lft 2591996sec preferred_lft 604796sec
inet6 fe80::1e6f:65ff:fe32:4c69/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 96951 820 0 0 0 0 0 0 96951
820 0 0 0 0 0 0
eth0: 1508942 9923 0 0 0 0 0 0 389531
1836 0 0 0 0 0 0
br0: 1280083 8467 0 0 0 0 0 6174 385584
1828 0 0 0 0 0 0
*** Protocol statistics:
Ip:
5568 total packets received
0 forwarded
0 incoming packets discarded
4089 incoming packets delivered
2391 requests sent out
Icmp:
42 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 2
echo requests: 40
42 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 2
echo replies: 40
IcmpMsg:
InType3: 2
InType8: 40
OutType0: 40
OutType3: 2
Tcp:
125 active connections openings
38 passive connection openings
71 failed connection attempts
6 connection resets received
26 connections established
2901 segments received
2268 segments send out
11 segments retransmited
0 bad segments received.
84 resets sent
Udp:
2571 packets received
0 packets to unknown port received.
0 packet receive errors
234 packets sent
UdpLite:
TcpExt:
30 TCP sockets finished time wait in fast timer
49 delayed acks sent
Quick ack mode was activated 1 times
491 packets directly queued to recvmsg prequeue.
2620 bytes directly in process context from backlog
2768 bytes directly received in process context from prequeue
996 packet headers predicted
161 packets header predicted and directly queued to user
330 acknowledgments not containing data payload received
923 predicted acknowledgments
1 times recovered from packet loss by selective acknowledgements
Detected reordering 1 times using FACK
10 fast retransmits
1 other TCP timeouts
1 DSACKs sent for old packets
1 DSACKs received
6 connections reset due to early user close
TCPDSACKIgnoredOld: 1
TCPSackShifted: 10
TCPSackMerged: 4
TCPSackShiftFallback: 7
IpExt:
InMcastPkts: 75
OutMcastPkts: 18
InBcastPkts: 1154
OutBcastPkts: 76
InOctets: 788646
OutOctets: 435406
InMcastOctets: 14574
OutMcastOctets: 4983
InBcastOctets: 110435
OutBcastOctets: 8232
*** Device features:
br0: 0x1800
eth0: 0x180
lo: 0x13865
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host Bridge
[1022:9601]
Subsystem: Advanced Micro Devices [AMD] RS880 Host Bridge [1022:9601]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32
Region 3: Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
(int gfx) [1022:9602] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fda00000-fdbfffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
(ext gfx port 0) [1022:9603] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fd700000-fd7fffff
Prefetchable memory behind bridge: 00000000fd600000-00000000fd6fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
(PCIE port 5) [1022:9609] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA
Controller [IDE mode] [1002:4390] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at ff00 [size=8]
Region 1: I/O ports at fe00 [size=4]
Region 2: I/O ports at fd00 [size=8]
Region 3: I/O ports at fc00 [size=4]
Region 4: I/O ports at fb00 [size=16]
Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0
Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI
Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0
Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI
Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385]
(rev 41)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller
[1002:439c] (rev 40) (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology Device [1458:5002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin B routed to IRQ 0
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at fa00 [size=16]
Kernel driver in use: pata_atiixp
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller
[1002:439d] (rev 40)
Subsystem: ATI Technologies Inc SB700/SB800 LPC host controller
[1002:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge
[1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: fdc00000-fdcfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2
Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin C routed to IRQ 5
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:15.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a0] (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fd900000-fd9fffff
Prefetchable memory behind bridge: 00000000fd800000-00000000fd8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0
Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI
Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at fe028000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS880 [Radeon HD
4290] [1002:9714] (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:d000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at ee00 [size=256]
Region 2: Memory at fdbe0000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at fda00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
01:05.1 Audio device [0403]: ATI Technologies Inc RS880 Audio Device [Radeon HD
4200] [1002:970f]
Subsystem: Giga-byte Technology Device [1458:960f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at fdbfc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
02:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic LSI MegaSAS 9260
[1000:0079] (rev 05)
Subsystem: LSI Logic / Symbios Logic Device [1000:9261]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at de00 [size=256]
Region 1: Memory at fd7fc000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at fd780000 (64-bit, non-prefetchable) [size=256K]
[virtual] Expansion ROM at fd600000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: megaraid_sas
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: I/O ports at ce00 [size=256]
Region 2: Memory at fdeff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fdef8000 (64-bit, prefetchable) [size=16K]
[virtual] Expansion ROM at fde00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
05:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial
ATA Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 11
Region 5: Memory at fd9fe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
05:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA
Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 0
Region 0: I/O ports at af00 [size=8]
Region 1: I/O ports at ae00 [size=4]
Region 2: I/O ports at ad00 [size=8]
Region 3: I/O ports at ac00 [size=4]
Region 4: I/O ports at ab00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.2
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-35 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
--
To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
