--- Begin Message ---
Package: kfreebsd-image-8.1-1-amd64
Version: 8.1+dfsg-8
Severity: grave
Tags: patch
Details at http://www.freebsd.org/cgi/query-pr.cgi?pr=154591
Upstream developer (yong...@freebsd.org) provided a fix by backporting
the if_msk driver from HEAD. I've verified that this resolves the
problem when applied to kernel of FreeBSD 8.2.
-- System Information:
Debian Release: 6.0.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: kfreebsd-amd64 (x86_64)
Kernel: kFreeBSD 8.1-1-amd64
Locale: LANG=ca_AD.utf8, LC_CTYPE=ca_AD.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages kfreebsd-image-8.1-1-amd64 depends on:
ii freebsd-utils 8.1-4+b1 FreeBSD utilities needed for GNU/k
ii kldutils 8.1-4+b1 tools for managing kFreeBSD module
kfreebsd-image-8.1-1-amd64 recommends no packages.
kfreebsd-image-8.1-1-amd64 suggests no packages.
-- no debconf information
diff -ur sys/dev/msk.old/if_msk.c sys/dev/msk/if_msk.c
--- sys/dev/msk.old/if_msk.c 2010-11-26 21:37:19.000000000 +0100
+++ sys/dev/msk/if_msk.c 2011-05-28 02:22:07.000000000 +0200
@@ -99,7 +99,7 @@
*/
#include <sys/cdefs.h>
-__FBSDID("$FreeBSD$");
+__FBSDID("$FreeBSD: head/sys/dev/msk/if_msk.c 222269 2011-05-24 20:39:07Z yongari $");
#include <sys/param.h>
#include <sys/systm.h>
@@ -221,6 +221,10 @@
"Marvell Yukon 88E8071 Gigabit Ethernet" },
{ VENDORID_MARVELL, DEVICEID_MRVL_436C,
"Marvell Yukon 88E8072 Gigabit Ethernet" },
+ { VENDORID_MARVELL, DEVICEID_MRVL_436D,
+ "Marvell Yukon 88E8055 Gigabit Ethernet" },
+ { VENDORID_MARVELL, DEVICEID_MRVL_4370,
+ "Marvell Yukon 88E8075 Gigabit Ethernet" },
{ VENDORID_MARVELL, DEVICEID_MRVL_4380,
"Marvell Yukon 88E8057 Gigabit Ethernet" },
{ VENDORID_MARVELL, DEVICEID_MRVL_4381,
@@ -270,6 +274,7 @@
#ifndef __NO_STRICT_ALIGNMENT
static __inline void msk_fixup_rx(struct mbuf *);
#endif
+static __inline void msk_rxcsum(struct msk_if_softc *, uint32_t, struct mbuf *);
static void msk_rxeof(struct msk_if_softc *, uint32_t, uint32_t, int);
static void msk_jumbo_rxeof(struct msk_if_softc *, uint32_t, uint32_t, int);
static void msk_txeof(struct msk_if_softc *, int);
@@ -294,6 +299,7 @@
static int msk_rx_dma_jalloc(struct msk_if_softc *);
static void msk_txrx_dma_free(struct msk_if_softc *);
static void msk_rx_dma_jfree(struct msk_if_softc *);
+static int msk_rx_fill(struct msk_if_softc *, int);
static int msk_init_rx_ring(struct msk_if_softc *);
static int msk_init_jumbo_rx_ring(struct msk_if_softc *);
static void msk_init_tx_ring(struct msk_if_softc *);
@@ -642,6 +648,54 @@
}
static int
+msk_rx_fill(struct msk_if_softc *sc_if, int jumbo)
+{
+ uint16_t idx;
+ int i;
+
+ if ((sc_if->msk_flags & MSK_FLAG_DESCV2) == 0 &&
+ (sc_if->msk_ifp->if_capenable & IFCAP_RXCSUM) != 0) {
+ /* Wait until controller executes OP_TCPSTART command. */
+ for (i = 10; i > 0; i--) {
+ DELAY(10);
+ idx = CSR_READ_2(sc_if->msk_softc,
+ Y2_PREF_Q_ADDR(sc_if->msk_rxq,
+ PREF_UNIT_GET_IDX_REG));
+ if (idx != 0)
+ break;
+ }
+ if (i == 0) {
+ device_printf(sc_if->msk_if_dev,
+ "prefetch unit stuck?\n");
+ return (ETIMEDOUT);
+ }
+ /*
+ * Fill consumed LE with free buffer. This can be done
+ * in Rx handler but we don't want to add special code
+ * in fast handler.
+ */
+ if (jumbo > 0) {
+ if (msk_jumbo_newbuf(sc_if, 0) != 0)
+ return (ENOBUFS);
+ bus_dmamap_sync(sc_if->msk_cdata.msk_jumbo_rx_ring_tag,
+ sc_if->msk_cdata.msk_jumbo_rx_ring_map,
+ BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+ } else {
+ if (msk_newbuf(sc_if, 0) != 0)
+ return (ENOBUFS);
+ bus_dmamap_sync(sc_if->msk_cdata.msk_rx_ring_tag,
+ sc_if->msk_cdata.msk_rx_ring_map,
+ BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+ }
+ sc_if->msk_cdata.msk_rx_prod = 0;
+ CSR_WRITE_2(sc_if->msk_softc,
+ Y2_PREF_Q_ADDR(sc_if->msk_rxq, PREF_UNIT_PUT_IDX_REG),
+ sc_if->msk_cdata.msk_rx_prod);
+ }
+ return (0);
+}
+
+static int
msk_init_rx_ring(struct msk_if_softc *sc_if)
{
struct msk_ring_data *rd;
@@ -657,7 +711,21 @@
rd = &sc_if->msk_rdata;
bzero(rd->msk_rx_ring, sizeof(struct msk_rx_desc) * MSK_RX_RING_CNT);
prod = sc_if->msk_cdata.msk_rx_prod;
- for (i = 0; i < MSK_RX_RING_CNT; i++) {
+ i = 0;
+ /* Have controller know how to compute Rx checksum. */
+ if ((sc_if->msk_flags & MSK_FLAG_DESCV2) == 0 &&
+ (sc_if->msk_ifp->if_capenable & IFCAP_RXCSUM) != 0) {
+ rxd = &sc_if->msk_cdata.msk_rxdesc[prod];
+ rxd->rx_m = NULL;
+ rxd->rx_le = &rd->msk_rx_ring[prod];
+ rxd->rx_le->msk_addr = htole32(ETHER_HDR_LEN << 16 |
+ ETHER_HDR_LEN);
+ rxd->rx_le->msk_control = htole32(OP_TCPSTART | HW_OWNER);
+ MSK_INC(prod, MSK_RX_RING_CNT);
+ MSK_INC(sc_if->msk_cdata.msk_rx_cons, MSK_RX_RING_CNT);
+ i++;
+ }
+ for (; i < MSK_RX_RING_CNT; i++) {
rxd = &sc_if->msk_cdata.msk_rxdesc[prod];
rxd->rx_m = NULL;
rxd->rx_le = &rd->msk_rx_ring[prod];
@@ -675,7 +743,8 @@
CSR_WRITE_2(sc_if->msk_softc,
Y2_PREF_Q_ADDR(sc_if->msk_rxq, PREF_UNIT_PUT_IDX_REG),
sc_if->msk_cdata.msk_rx_prod);
-
+ if (msk_rx_fill(sc_if, 0) != 0)
+ return (ENOBUFS);
return (0);
}
@@ -696,7 +765,21 @@
bzero(rd->msk_jumbo_rx_ring,
sizeof(struct msk_rx_desc) * MSK_JUMBO_RX_RING_CNT);
prod = sc_if->msk_cdata.msk_rx_prod;
- for (i = 0; i < MSK_JUMBO_RX_RING_CNT; i++) {
+ i = 0;
+ /* Have controller know how to compute Rx checksum. */
+ if ((sc_if->msk_flags & MSK_FLAG_DESCV2) == 0 &&
+ (sc_if->msk_ifp->if_capenable & IFCAP_RXCSUM) != 0) {
+ rxd = &sc_if->msk_cdata.msk_jumbo_rxdesc[prod];
+ rxd->rx_m = NULL;
+ rxd->rx_le = &rd->msk_jumbo_rx_ring[prod];
+ rxd->rx_le->msk_addr = htole32(ETHER_HDR_LEN << 16 |
+ ETHER_HDR_LEN);
+ rxd->rx_le->msk_control = htole32(OP_TCPSTART | HW_OWNER);
+ MSK_INC(prod, MSK_JUMBO_RX_RING_CNT);
+ MSK_INC(sc_if->msk_cdata.msk_rx_cons, MSK_JUMBO_RX_RING_CNT);
+ i++;
+ }
+ for (; i < MSK_JUMBO_RX_RING_CNT; i++) {
rxd = &sc_if->msk_cdata.msk_jumbo_rxdesc[prod];
rxd->rx_m = NULL;
rxd->rx_le = &rd->msk_jumbo_rx_ring[prod];
@@ -713,7 +796,8 @@
CSR_WRITE_2(sc_if->msk_softc,
Y2_PREF_Q_ADDR(sc_if->msk_rxq, PREF_UNIT_PUT_IDX_REG),
sc_if->msk_cdata.msk_rx_prod);
-
+ if (msk_rx_fill(sc_if, 1) != 0)
+ return (ENOBUFS);
return (0);
}
@@ -922,7 +1006,7 @@
struct msk_if_softc *sc_if;
struct ifreq *ifr;
struct mii_data *mii;
- int error, mask;
+ int error, mask, reinit;
sc_if = ifp->if_softc;
ifr = (struct ifreq *)data;
@@ -934,7 +1018,7 @@
if (ifr->ifr_mtu > MSK_JUMBO_MTU || ifr->ifr_mtu < ETHERMIN)
error = EINVAL;
else if (ifp->if_mtu != ifr->ifr_mtu) {
- if (ifr->ifr_mtu > ETHERMTU) {
+ if (ifr->ifr_mtu > ETHERMTU) {
if ((sc_if->msk_flags & MSK_FLAG_JUMBO) == 0) {
error = EINVAL;
MSK_IF_UNLOCK(sc_if);
@@ -950,7 +1034,10 @@
}
}
ifp->if_mtu = ifr->ifr_mtu;
- msk_init_locked(sc_if);
+ if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
+ ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
+ msk_init_locked(sc_if);
+ }
}
MSK_IF_UNLOCK(sc_if);
break;
@@ -981,6 +1068,7 @@
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
break;
case SIOCSIFCAP:
+ reinit = 0;
MSK_IF_LOCK(sc_if);
mask = ifr->ifr_reqcap ^ ifp->if_capenable;
if ((mask & IFCAP_TXCSUM) != 0 &&
@@ -992,8 +1080,11 @@
ifp->if_hwassist &= ~MSK_CSUM_FEATURES;
}
if ((mask & IFCAP_RXCSUM) != 0 &&
- (IFCAP_RXCSUM & ifp->if_capabilities) != 0)
+ (IFCAP_RXCSUM & ifp->if_capabilities) != 0) {
ifp->if_capenable ^= IFCAP_RXCSUM;
+ if ((sc_if->msk_flags & MSK_FLAG_DESCV2) == 0)
+ reinit = 1;
+ }
if ((mask & IFCAP_VLAN_HWCSUM) != 0 &&
(IFCAP_VLAN_HWCSUM & ifp->if_capabilities) != 0)
ifp->if_capenable ^= IFCAP_VLAN_HWCSUM;
@@ -1021,8 +1112,11 @@
ifp->if_hwassist &= ~(MSK_CSUM_FEATURES | CSUM_TSO);
ifp->if_capenable &= ~(IFCAP_TSO4 | IFCAP_TXCSUM);
}
-
VLAN_CAPABILITIES(ifp);
+ if (reinit > 0 && (ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
+ ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
+ msk_init_locked(sc_if);
+ }
MSK_IF_UNLOCK(sc_if);
break;
default:
@@ -1125,37 +1219,30 @@
*/
CSR_WRITE_1(sc, B2_Y2_CLK_GATE, val);
- val = CSR_PCI_READ_4(sc, PCI_OUR_REG_1);
- val &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
+ our = CSR_PCI_READ_4(sc, PCI_OUR_REG_1);
+ our &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
if (sc->msk_hw_id == CHIP_ID_YUKON_XL) {
if (sc->msk_hw_rev > CHIP_REV_YU_XL_A1) {
/* Deassert Low Power for 1st PHY. */
- val |= PCI_Y2_PHY1_COMA;
+ our |= PCI_Y2_PHY1_COMA;
if (sc->msk_num_port > 1)
- val |= PCI_Y2_PHY2_COMA;
+ our |= PCI_Y2_PHY2_COMA;
}
}
- /* Release PHY from PowerDown/COMA mode. */
- CSR_PCI_WRITE_4(sc, PCI_OUR_REG_1, val);
- switch (sc->msk_hw_id) {
- case CHIP_ID_YUKON_EC_U:
- case CHIP_ID_YUKON_EX:
- case CHIP_ID_YUKON_FE_P:
- case CHIP_ID_YUKON_UL_2:
- case CHIP_ID_YUKON_OPT:
- CSR_WRITE_2(sc, B0_CTST, Y2_HW_WOL_OFF);
-
- /* Enable all clocks. */
- CSR_PCI_WRITE_4(sc, PCI_OUR_REG_3, 0);
- our = CSR_PCI_READ_4(sc, PCI_OUR_REG_4);
- our &= (PCI_FORCE_ASPM_REQUEST|PCI_ASPM_GPHY_LINK_DOWN|
- PCI_ASPM_INT_FIFO_EMPTY|PCI_ASPM_CLKRUN_REQUEST);
+ if (sc->msk_hw_id == CHIP_ID_YUKON_EC_U ||
+ sc->msk_hw_id == CHIP_ID_YUKON_EX ||
+ sc->msk_hw_id >= CHIP_ID_YUKON_FE_P) {
+ val = CSR_PCI_READ_4(sc, PCI_OUR_REG_4);
+ val &= (PCI_FORCE_ASPM_REQUEST |
+ PCI_ASPM_GPHY_LINK_DOWN | PCI_ASPM_INT_FIFO_EMPTY |
+ PCI_ASPM_CLKRUN_REQUEST);
/* Set all bits to 0 except bits 15..12. */
- CSR_PCI_WRITE_4(sc, PCI_OUR_REG_4, our);
- our = CSR_PCI_READ_4(sc, PCI_OUR_REG_5);
- our &= PCI_CTL_TIM_VMAIN_AV_MSK;
- CSR_PCI_WRITE_4(sc, PCI_OUR_REG_5, our);
+ CSR_PCI_WRITE_4(sc, PCI_OUR_REG_4, val);
+ val = CSR_PCI_READ_4(sc, PCI_OUR_REG_5);
+ val &= PCI_CTL_TIM_VMAIN_AV_MSK;
+ CSR_PCI_WRITE_4(sc, PCI_OUR_REG_5, val);
CSR_PCI_WRITE_4(sc, PCI_CFG_REG_1, 0);
+ CSR_WRITE_2(sc, B0_CTST, Y2_HW_WOL_ON);
/*
* Disable status race, workaround for
* Yukon EC Ultra & Yukon EX.
@@ -1164,10 +1251,10 @@
val |= GLB_GPIO_STAT_RACE_DIS;
CSR_WRITE_4(sc, B2_GP_IO, val);
CSR_READ_4(sc, B2_GP_IO);
- break;
- default:
- break;
}
+ /* Release PHY from PowerDown/COMA mode. */
+ CSR_PCI_WRITE_4(sc, PCI_OUR_REG_1, our);
+
for (i = 0; i < sc->msk_num_port; i++) {
CSR_WRITE_2(sc, MR_ADDR(i, GMAC_LINK_CTRL),
GMLC_RST_SET);
@@ -1213,28 +1300,33 @@
bus_addr_t addr;
uint16_t status;
uint32_t val;
- int i;
-
- CSR_WRITE_2(sc, B0_CTST, CS_RST_CLR);
+ int i, initram;
/* Disable ASF. */
- if (sc->msk_hw_id == CHIP_ID_YUKON_EX) {
- status = CSR_READ_2(sc, B28_Y2_ASF_HCU_CCSR);
- /* Clear AHB bridge & microcontroller reset. */
- status &= ~(Y2_ASF_HCU_CCSR_AHB_RST |
- Y2_ASF_HCU_CCSR_CPU_RST_MODE);
- /* Clear ASF microcontroller state. */
- status &= ~ Y2_ASF_HCU_CCSR_UC_STATE_MSK;
- CSR_WRITE_2(sc, B28_Y2_ASF_HCU_CCSR, status);
- } else
- CSR_WRITE_1(sc, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
- CSR_WRITE_2(sc, B0_CTST, Y2_ASF_DISABLE);
-
- /*
- * Since we disabled ASF, S/W reset is required for Power Management.
- */
- CSR_WRITE_2(sc, B0_CTST, CS_RST_SET);
- CSR_WRITE_2(sc, B0_CTST, CS_RST_CLR);
+ if (sc->msk_hw_id >= CHIP_ID_YUKON_XL &&
+ sc->msk_hw_id <= CHIP_ID_YUKON_SUPR) {
+ if (sc->msk_hw_id == CHIP_ID_YUKON_EX ||
+ sc->msk_hw_id == CHIP_ID_YUKON_SUPR) {
+ CSR_WRITE_4(sc, B28_Y2_CPU_WDOG, 0);
+ status = CSR_READ_2(sc, B28_Y2_ASF_HCU_CCSR);
+ /* Clear AHB bridge & microcontroller reset. */
+ status &= ~(Y2_ASF_HCU_CCSR_AHB_RST |
+ Y2_ASF_HCU_CCSR_CPU_RST_MODE);
+ /* Clear ASF microcontroller state. */
+ status &= ~Y2_ASF_HCU_CCSR_UC_STATE_MSK;
+ status &= ~Y2_ASF_HCU_CCSR_CPU_CLK_DIVIDE_MSK;
+ CSR_WRITE_2(sc, B28_Y2_ASF_HCU_CCSR, status);
+ CSR_WRITE_4(sc, B28_Y2_CPU_WDOG, 0);
+ } else
+ CSR_WRITE_1(sc, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
+ CSR_WRITE_2(sc, B0_CTST, Y2_ASF_DISABLE);
+ /*
+ * Since we disabled ASF, S/W reset is required for
+ * Power Management.
+ */
+ CSR_WRITE_2(sc, B0_CTST, CS_RST_SET);
+ CSR_WRITE_2(sc, B0_CTST, CS_RST_CLR);
+ }
/* Clear all error bits in the PCI status register. */
status = pci_read_config(sc->msk_dev, PCIR_STATUS, 2);
@@ -1242,7 +1334,7 @@
pci_write_config(sc->msk_dev, PCIR_STATUS, status |
PCIM_STATUS_PERR | PCIM_STATUS_SERR | PCIM_STATUS_RMABORT |
- PCIM_STATUS_RTABORT | PCIM_STATUS_PERRREPORT, 2);
+ PCIM_STATUS_RTABORT | PCIM_STATUS_MDPERR, 2);
CSR_WRITE_2(sc, B0_CTST, CS_MRST_CLR);
switch (sc->msk_bustype) {
@@ -1275,17 +1367,22 @@
/* Reset GPHY/GMAC Control */
for (i = 0; i < sc->msk_num_port; i++) {
/* GPHY Control reset. */
- CSR_WRITE_4(sc, MR_ADDR(i, GPHY_CTRL), GPC_RST_SET);
- CSR_WRITE_4(sc, MR_ADDR(i, GPHY_CTRL), GPC_RST_CLR);
+ CSR_WRITE_1(sc, MR_ADDR(i, GPHY_CTRL), GPC_RST_SET);
+ CSR_WRITE_1(sc, MR_ADDR(i, GPHY_CTRL), GPC_RST_CLR);
/* GMAC Control reset. */
CSR_WRITE_4(sc, MR_ADDR(i, GMAC_CTRL), GMC_RST_SET);
CSR_WRITE_4(sc, MR_ADDR(i, GMAC_CTRL), GMC_RST_CLR);
CSR_WRITE_4(sc, MR_ADDR(i, GMAC_CTRL), GMC_F_LOOPB_OFF);
- if (sc->msk_hw_id == CHIP_ID_YUKON_EX)
+ if (sc->msk_hw_id == CHIP_ID_YUKON_EX ||
+ sc->msk_hw_id == CHIP_ID_YUKON_SUPR)
CSR_WRITE_4(sc, MR_ADDR(i, GMAC_CTRL),
GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON |
GMC_BYP_RETR_ON);
}
+
+ if (sc->msk_hw_id == CHIP_ID_YUKON_SUPR &&
+ sc->msk_hw_rev > CHIP_REV_YU_SU_B0)
+ CSR_PCI_WRITE_4(sc, PCI_OUR_REG_3, PCI_CLK_MACSEC_DIS);
if (sc->msk_hw_id == CHIP_ID_YUKON_OPT && sc->msk_hw_rev == 0) {
/* Disable PCIe PHY powerdown(reg 0x80, bit7). */
CSR_WRITE_4(sc, Y2_PEX_PHY_DATA, (0x0080 << 16) | 0x0080);
@@ -1309,8 +1406,14 @@
CSR_WRITE_1(sc, GMAC_TI_ST_CTRL, GMT_ST_STOP);
CSR_WRITE_1(sc, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
+ initram = 0;
+ if (sc->msk_hw_id == CHIP_ID_YUKON_XL ||
+ sc->msk_hw_id == CHIP_ID_YUKON_EC ||
+ sc->msk_hw_id == CHIP_ID_YUKON_FE)
+ initram++;
+
/* Configure timeout values. */
- for (i = 0; i < sc->msk_num_port; i++) {
+ for (i = 0; initram > 0 && i < sc->msk_num_port; i++) {
CSR_WRITE_2(sc, SELECT_RAM_BUFFER(i, B3_RI_CTRL), RI_RST_SET);
CSR_WRITE_2(sc, SELECT_RAM_BUFFER(i, B3_RI_CTRL), RI_RST_CLR);
CSR_WRITE_1(sc, SELECT_RAM_BUFFER(i, B3_RI_WTO_R1),
@@ -1485,23 +1588,14 @@
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
ifp->if_mtu = ETHERMTU;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
- /*
- * IFCAP_RXCSUM capability is intentionally disabled as the hardware
- * has serious bug in Rx checksum offload for all Yukon II family
- * hardware. It seems there is a workaround to make it work somtimes.
- * However, the workaround also have to check OP code sequences to
- * verify whether the OP code is correct. Sometimes it should compute
- * IP/TCP/UDP checksum in driver in order to verify correctness of
- * checksum computed by hardware. If you have to compute checksum
- * with software to verify the hardware's checksum why have hardware
- * compute the checksum? I think there is no reason to spend time to
- * make Rx checksum offload work on Yukon II hardware.
- */
ifp->if_capabilities = IFCAP_TXCSUM | IFCAP_TSO4;
/*
- * Enable Rx checksum offloading if controller support new
- * descriptor format.
+ * Enable Rx checksum offloading if controller supports
+ * new descriptor formant and controller is not Yukon XL.
*/
+ if ((sc_if->msk_flags & MSK_FLAG_DESCV2) == 0 &&
+ sc->msk_hw_id != CHIP_ID_YUKON_XL)
+ ifp->if_capabilities |= IFCAP_RXCSUM;
if ((sc_if->msk_flags & MSK_FLAG_DESCV2) != 0 &&
(sc_if->msk_flags & MSK_FLAG_NORX_CSUM) == 0)
ifp->if_capabilities |= IFCAP_RXCSUM;
@@ -1509,8 +1603,6 @@
ifp->if_capenable = ifp->if_capabilities;
ifp->if_ioctl = msk_ioctl;
ifp->if_start = msk_start;
- ifp->if_timer = 0;
- ifp->if_watchdog = NULL;
ifp->if_init = msk_init;
IFQ_SET_MAXLEN(&ifp->if_snd, MSK_TX_RING_CNT - 1);
ifp->if_snd.ifq_drv_maxlen = MSK_TX_RING_CNT - 1;
@@ -1544,7 +1636,7 @@
* this workaround does not work so disable checksum offload
* for VLAN interface.
*/
- ifp->if_capabilities |= IFCAP_VLAN_HWTAGGING | IFCAP_VLAN_HWTSO;
+ ifp->if_capabilities |= IFCAP_VLAN_HWTAGGING | IFCAP_VLAN_HWTSO;
/*
* Enable Rx checksum offloading for VLAN tagged frames
* if controller support new descriptor format.
@@ -1630,13 +1722,15 @@
}
}
+ /* Enable all clocks before accessing any registers. */
+ CSR_PCI_WRITE_4(sc, PCI_OUR_REG_3, 0);
+
CSR_WRITE_2(sc, B0_CTST, CS_RST_CLR);
sc->msk_hw_id = CSR_READ_1(sc, B2_CHIP_ID);
sc->msk_hw_rev = (CSR_READ_1(sc, B2_MAC_CFG) >> 4) & 0x0f;
/* Bail out if chip is not recognized. */
if (sc->msk_hw_id < CHIP_ID_YUKON_XL ||
sc->msk_hw_id > CHIP_ID_YUKON_OPT ||
- sc->msk_hw_id == CHIP_ID_YUKON_SUPR ||
sc->msk_hw_id == CHIP_ID_YUKON_UNKNOWN) {
device_printf(dev, "unknown device: id=0x%02x, rev=0x%02x\n",
sc->msk_hw_id, sc->msk_hw_rev);
@@ -1670,9 +1764,6 @@
resource_int_value(device_get_name(dev), device_get_unit(dev),
"int_holdoff", &sc->msk_int_holdoff);
- /* Soft reset. */
- CSR_WRITE_2(sc, B0_CTST, CS_RST_SET);
- CSR_WRITE_2(sc, B0_CTST, CS_RST_CLR);
sc->msk_pmd = CSR_READ_1(sc, B2_PMD_TYP);
/* Check number of MACs. */
sc->msk_num_port = 1;
@@ -1746,6 +1837,11 @@
sc->msk_clock = 156; /* 156 MHz */
sc->msk_pflags |= MSK_FLAG_JUMBO;
break;
+ case CHIP_ID_YUKON_SUPR:
+ sc->msk_clock = 125; /* 125 MHz */
+ sc->msk_pflags |= MSK_FLAG_JUMBO | MSK_FLAG_DESCV2 |
+ MSK_FLAG_AUTOTX_CSUM;
+ break;
case CHIP_ID_YUKON_UL_2:
sc->msk_clock = 125; /* 125 MHz */
sc->msk_pflags |= MSK_FLAG_JUMBO;
@@ -1811,7 +1907,7 @@
}
mmd->port = MSK_PORT_A;
mmd->pmd = sc->msk_pmd;
- mmd->mii_flags |= MIIF_DOPAUSE | MIIF_FORCEPAUSE;
+ mmd->mii_flags |= MIIF_DOPAUSE;
if (sc->msk_pmd == 'L' || sc->msk_pmd == 'S')
mmd->mii_flags |= MIIF_HAVEFIBER;
if (sc->msk_pmd == 'P')
@@ -1825,7 +1921,8 @@
error = ENXIO;
goto fail;
}
- mmd = malloc(sizeof(struct msk_mii_data), M_DEVBUF, M_WAITOK | M_ZERO);
+ mmd = malloc(sizeof(struct msk_mii_data), M_DEVBUF, M_WAITOK |
+ M_ZERO);
if (mmd == NULL) {
device_printf(dev, "failed to allocate memory for "
"ivars of PORT_B\n");
@@ -1834,9 +1931,9 @@
}
mmd->port = MSK_PORT_B;
mmd->pmd = sc->msk_pmd;
- if (sc->msk_pmd == 'L' || sc->msk_pmd == 'S')
+ if (sc->msk_pmd == 'L' || sc->msk_pmd == 'S')
mmd->mii_flags |= MIIF_HAVEFIBER;
- if (sc->msk_pmd == 'P')
+ if (sc->msk_pmd == 'P')
mmd->mii_flags |= MIIF_HAVEFIBER | MIIF_MACPRIV0;
device_set_ivars(sc->msk_devs[MSK_PORT_B], mmd);
}
@@ -1888,7 +1985,8 @@
/* Can't hold locks while calling detach. */
MSK_IF_UNLOCK(sc_if);
callout_drain(&sc_if->msk_tick_ch);
- ether_ifdetach(ifp);
+ if (ifp)
+ ether_ifdetach(ifp);
MSK_IF_LOCK(sc_if);
}
@@ -1990,7 +2088,7 @@
error = bus_dma_tag_create(
bus_get_dma_tag(sc->msk_dev), /* parent */
MSK_STAT_ALIGN, 0, /* alignment, boundary */
- BUS_SPACE_MAXADDR, /* lowaddr */
+ BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
MSK_STAT_RING_SZ, /* maxsize */
@@ -2886,6 +2984,7 @@
MSK_LOCK(sc);
+ CSR_PCI_WRITE_4(sc, PCI_OUR_REG_3, 0);
mskc_reset(sc);
for (i = 0; i < sc->msk_num_port; i++) {
if (sc->msk_if[i] != NULL && sc->msk_if[i]->msk_ifp != NULL &&
@@ -2919,6 +3018,96 @@
}
#endif
+static __inline void
+msk_rxcsum(struct msk_if_softc *sc_if, uint32_t control, struct mbuf *m)
+{
+ struct ether_header *eh;
+ struct ip *ip;
+ struct udphdr *uh;
+ int32_t hlen, len, pktlen, temp32;
+ uint16_t csum, *opts;
+
+ if ((sc_if->msk_flags & MSK_FLAG_DESCV2) != 0) {
+ if ((control & (CSS_IPV4 | CSS_IPFRAG)) == CSS_IPV4) {
+ m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
+ if ((control & CSS_IPV4_CSUM_OK) != 0)
+ m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
+ if ((control & (CSS_TCP | CSS_UDP)) != 0 &&
+ (control & (CSS_TCPUDP_CSUM_OK)) != 0) {
+ m->m_pkthdr.csum_flags |= CSUM_DATA_VALID |
+ CSUM_PSEUDO_HDR;
+ m->m_pkthdr.csum_data = 0xffff;
+ }
+ }
+ return;
+ }
+ /*
+ * Marvell Yukon controllers that support OP_RXCHKS has known
+ * to have various Rx checksum offloading bugs. These
+ * controllers can be configured to compute simple checksum
+ * at two different positions. So we can compute IP and TCP/UDP
+ * checksum at the same time. We intentionally have controller
+ * compute TCP/UDP checksum twice by specifying the same
+ * checksum start position and compare the result. If the value
+ * is different it would indicate the hardware logic was wrong.
+ */
+ if ((sc_if->msk_csum & 0xFFFF) != (sc_if->msk_csum >> 16)) {
+ if (bootverbose)
+ device_printf(sc_if->msk_if_dev,
+ "Rx checksum value mismatch!\n");
+ return;
+ }
+ pktlen = m->m_pkthdr.len;
+ if (pktlen < sizeof(struct ether_header) + sizeof(struct ip))
+ return;
+ eh = mtod(m, struct ether_header *);
+ if (eh->ether_type != htons(ETHERTYPE_IP))
+ return;
+ ip = (struct ip *)(eh + 1);
+ if (ip->ip_v != IPVERSION)
+ return;
+
+ hlen = ip->ip_hl << 2;
+ pktlen -= sizeof(struct ether_header);
+ if (hlen < sizeof(struct ip))
+ return;
+ if (ntohs(ip->ip_len) < hlen)
+ return;
+ if (ntohs(ip->ip_len) != pktlen)
+ return;
+ if (ip->ip_off & htons(IP_MF | IP_OFFMASK))
+ return; /* can't handle fragmented packet. */
+
+ switch (ip->ip_p) {
+ case IPPROTO_TCP:
+ if (pktlen < (hlen + sizeof(struct tcphdr)))
+ return;
+ break;
+ case IPPROTO_UDP:
+ if (pktlen < (hlen + sizeof(struct udphdr)))
+ return;
+ uh = (struct udphdr *)((caddr_t)ip + hlen);
+ if (uh->uh_sum == 0)
+ return; /* no checksum */
+ break;
+ default:
+ return;
+ }
+ csum = bswap16(sc_if->msk_csum & 0xFFFF);
+ /* Checksum fixup for IP options. */
+ len = hlen - sizeof(struct ip);
+ if (len > 0) {
+ opts = (uint16_t *)(ip + 1);
+ for (; len > 0; len -= sizeof(uint16_t), opts++) {
+ temp32 = csum - *opts;
+ temp32 = (temp32 >> 16) + (temp32 & 65535);
+ csum = temp32 & 65535;
+ }
+ }
+ m->m_pkthdr.csum_flags |= CSUM_DATA_VALID;
+ m->m_pkthdr.csum_data = csum;
+}
+
static void
msk_rxeof(struct msk_if_softc *sc_if, uint32_t status, uint32_t control,
int len)
@@ -2973,18 +3162,8 @@
msk_fixup_rx(m);
#endif
ifp->if_ipackets++;
- if ((ifp->if_capenable & IFCAP_RXCSUM) != 0 &&
- (control & (CSS_IPV4 | CSS_IPFRAG)) == CSS_IPV4) {
- m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
- if ((control & CSS_IPV4_CSUM_OK) != 0)
- m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
- if ((control & (CSS_TCP | CSS_UDP)) != 0 &&
- (control & (CSS_TCPUDP_CSUM_OK)) != 0) {
- m->m_pkthdr.csum_flags |= CSUM_DATA_VALID |
- CSUM_PSEUDO_HDR;
- m->m_pkthdr.csum_data = 0xffff;
- }
- }
+ if ((ifp->if_capenable & IFCAP_RXCSUM) != 0)
+ msk_rxcsum(sc_if, control, m);
/* Check for VLAN tagged packets. */
if ((status & GMR_FS_VLAN) != 0 &&
(ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0) {
@@ -3043,18 +3222,8 @@
msk_fixup_rx(m);
#endif
ifp->if_ipackets++;
- if ((ifp->if_capenable & IFCAP_RXCSUM) != 0 &&
- (control & (CSS_IPV4 | CSS_IPFRAG)) == CSS_IPV4) {
- m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
- if ((control & CSS_IPV4_CSUM_OK) != 0)
- m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
- if ((control & (CSS_TCP | CSS_UDP)) != 0 &&
- (control & (CSS_TCPUDP_CSUM_OK)) != 0) {
- m->m_pkthdr.csum_flags |= CSUM_DATA_VALID |
- CSUM_PSEUDO_HDR;
- m->m_pkthdr.csum_data = 0xffff;
- }
- }
+ if ((ifp->if_capenable & IFCAP_RXCSUM) != 0)
+ msk_rxcsum(sc_if, control, m);
/* Check for VLAN tagged packets. */
if ((status & GMR_FS_VLAN) != 0 &&
(ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0) {
@@ -3260,7 +3429,7 @@
CSR_WRITE_1(sc, B2_TST_CTRL1, TST_CFG_WRITE_ON);
pci_write_config(sc->msk_dev, PCIR_STATUS, v16 |
PCIM_STATUS_PERR | PCIM_STATUS_SERR | PCIM_STATUS_RMABORT |
- PCIM_STATUS_RTABORT | PCIM_STATUS_PERRREPORT, 2);
+ PCIM_STATUS_RTABORT | PCIM_STATUS_MDPERR, 2);
CSR_WRITE_1(sc, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
@@ -3371,6 +3540,9 @@
break;
case OP_RXCHKSVLAN:
sc_if->msk_vtag = ntohs(len);
+ /* FALLTHROUGH */
+ case OP_RXCHKS:
+ sc_if->msk_csum = status;
break;
case OP_RXSTAT:
if (!(sc_if->msk_ifp->if_drv_flags & IFF_DRV_RUNNING))
@@ -3504,37 +3676,24 @@
ifp = sc_if->msk_ifp;
sc = sc_if->msk_softc;
- switch (sc->msk_hw_id) {
- case CHIP_ID_YUKON_EX:
- if (sc->msk_hw_rev == CHIP_REV_YU_EX_A0)
- goto yukon_ex_workaround;
- if (ifp->if_mtu > ETHERMTU)
- CSR_WRITE_4(sc,
- MR_ADDR(sc_if->msk_port, TX_GMF_CTRL_T),
- TX_JUMBO_ENA | TX_STFW_ENA);
- else
- CSR_WRITE_4(sc,
- MR_ADDR(sc_if->msk_port, TX_GMF_CTRL_T),
- TX_JUMBO_DIS | TX_STFW_ENA);
- break;
- default:
-yukon_ex_workaround:
+ if ((sc->msk_hw_id == CHIP_ID_YUKON_EX &&
+ sc->msk_hw_rev != CHIP_REV_YU_EX_A0) ||
+ sc->msk_hw_id >= CHIP_ID_YUKON_SUPR) {
+ CSR_WRITE_4(sc, MR_ADDR(sc_if->msk_port, TX_GMF_CTRL_T),
+ TX_STFW_ENA);
+ } else {
if (ifp->if_mtu > ETHERMTU) {
/* Set Tx GMAC FIFO Almost Empty Threshold. */
CSR_WRITE_4(sc,
MR_ADDR(sc_if->msk_port, TX_GMF_AE_THR),
MSK_ECU_JUMBO_WM << 16 | MSK_ECU_AE_THR);
/* Disable Store & Forward mode for Tx. */
- CSR_WRITE_4(sc,
- MR_ADDR(sc_if->msk_port, TX_GMF_CTRL_T),
- TX_JUMBO_ENA | TX_STFW_DIS);
+ CSR_WRITE_4(sc, MR_ADDR(sc_if->msk_port, TX_GMF_CTRL_T),
+ TX_STFW_DIS);
} else {
- /* Enable Store & Forward mode for Tx. */
- CSR_WRITE_4(sc,
- MR_ADDR(sc_if->msk_port, TX_GMF_CTRL_T),
- TX_JUMBO_DIS | TX_STFW_ENA);
+ CSR_WRITE_4(sc, MR_ADDR(sc_if->msk_port, TX_GMF_CTRL_T),
+ TX_STFW_ENA);
}
- break;
}
}
@@ -3583,11 +3742,12 @@
ifp->if_capenable &= ~(IFCAP_TSO4 | IFCAP_TXCSUM);
}
- /* GMAC Control reset. */
- CSR_WRITE_4(sc, MR_ADDR(sc_if->msk_port, GMAC_CTRL), GMC_RST_SET);
- CSR_WRITE_4(sc, MR_ADDR(sc_if->msk_port, GMAC_CTRL), GMC_RST_CLR);
- CSR_WRITE_4(sc, MR_ADDR(sc_if->msk_port, GMAC_CTRL), GMC_F_LOOPB_OFF);
- if (sc->msk_hw_id == CHIP_ID_YUKON_EX)
+ /* GMAC Control reset. */
+ CSR_WRITE_4(sc, MR_ADDR(sc_if->msk_port, GMAC_CTRL), GMC_RST_SET);
+ CSR_WRITE_4(sc, MR_ADDR(sc_if->msk_port, GMAC_CTRL), GMC_RST_CLR);
+ CSR_WRITE_4(sc, MR_ADDR(sc_if->msk_port, GMAC_CTRL), GMC_F_LOOPB_OFF);
+ if (sc->msk_hw_id == CHIP_ID_YUKON_EX ||
+ sc->msk_hw_id == CHIP_ID_YUKON_SUPR)
CSR_WRITE_4(sc, MR_ADDR(sc_if->msk_port, GMAC_CTRL),
GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON |
GMC_BYP_RETR_ON);
@@ -3695,13 +3855,13 @@
msk_set_tx_stfwd(sc_if);
}
- if (sc->msk_hw_id == CHIP_ID_YUKON_FE_P &&
- sc->msk_hw_rev == CHIP_REV_YU_FE_P_A0) {
- /* Disable dynamic watermark - from Linux. */
- reg = CSR_READ_4(sc, MR_ADDR(sc_if->msk_port, TX_GMF_EA));
- reg &= ~0x03;
- CSR_WRITE_4(sc, MR_ADDR(sc_if->msk_port, TX_GMF_EA), reg);
- }
+ if (sc->msk_hw_id == CHIP_ID_YUKON_FE_P &&
+ sc->msk_hw_rev == CHIP_REV_YU_FE_P_A0) {
+ /* Disable dynamic watermark - from Linux. */
+ reg = CSR_READ_4(sc, MR_ADDR(sc_if->msk_port, TX_GMF_EA));
+ reg &= ~0x03;
+ CSR_WRITE_4(sc, MR_ADDR(sc_if->msk_port, TX_GMF_EA), reg);
+ }
/*
* Disable Force Sync bit and Alloc bit in Tx RAM interface
@@ -3758,8 +3918,13 @@
msk_init_tx_ring(sc_if);
/* Disable Rx checksum offload and RSS hash. */
- CSR_WRITE_4(sc, Q_ADDR(sc_if->msk_rxq, Q_CSR),
- BMU_DIS_RX_CHKSUM | BMU_DIS_RX_RSS_HASH);
+ reg = BMU_DIS_RX_RSS_HASH;
+ if ((sc_if->msk_flags & MSK_FLAG_DESCV2) == 0 &&
+ (ifp->if_capenable & IFCAP_RXCSUM) != 0)
+ reg |= BMU_ENA_RX_CHKSUM;
+ else
+ reg |= BMU_DIS_RX_CHKSUM;
+ CSR_WRITE_4(sc, Q_ADDR(sc_if->msk_rxq, Q_CSR), reg);
if (sc_if->msk_framesize > (MCLBYTES - MSK_RX_BUF_ALIGN)) {
msk_set_prefetch(sc, sc_if->msk_rxq,
sc_if->msk_rdata.msk_jumbo_rx_ring_paddr,
@@ -3777,7 +3942,8 @@
msk_stop(sc_if);
return;
}
- if (sc->msk_hw_id == CHIP_ID_YUKON_EX) {
+ if (sc->msk_hw_id == CHIP_ID_YUKON_EX ||
+ sc->msk_hw_id == CHIP_ID_YUKON_SUPR) {
/* Disable flushing of non-ASF packets. */
CSR_WRITE_4(sc, MR_ADDR(sc_if->msk_port, RX_GMF_CTRL_T),
GMF_RX_MACSEC_FLUSH_OFF);
diff -ur sys/dev/msk.old/if_mskreg.h sys/dev/msk/if_mskreg.h
--- sys/dev/msk.old/if_mskreg.h 2010-05-06 20:47:16.000000000 +0200
+++ sys/dev/msk/if_mskreg.h 2011-05-28 02:22:07.000000000 +0200
@@ -93,7 +93,7 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-/*$FreeBSD$*/
+/*$FreeBSD: head/sys/dev/msk/if_mskreg.h 222230 2011-05-23 21:51:47Z yongari $*/
/*
* SysKonnect PCI vendor ID
@@ -144,6 +144,8 @@
#define DEVICEID_MRVL_436A 0x436A
#define DEVICEID_MRVL_436B 0x436B
#define DEVICEID_MRVL_436C 0x436C
+#define DEVICEID_MRVL_436D 0x436D
+#define DEVICEID_MRVL_4370 0x4370
#define DEVICEID_MRVL_4380 0x4380
#define DEVICEID_MRVL_4381 0x4381
@@ -321,6 +323,9 @@
#define PCI_OS_SPD_X100 2 /* PCI-X 100MHz Bus */
#define PCI_OS_SPD_X133 3 /* PCI-X 133MHz Bus */
+/* PCI_OUR_REG_3 32 bit Our Register 3 (Yukon-ECU only) */
+#define PCI_CLK_MACSEC_DIS BIT_17 /* Disable Clock MACSec. */
+
/* PCI_OUR_REG_4 32 bit Our Register 4 (Yukon-ECU only) */
#define PCI_TIMER_VALUE_MSK (0xff<<16) /* Bit 23..16: Timer Value Mask */
#define PCI_FORCE_ASPM_REQUEST BIT_15 /* Force ASPM Request (A1 only) */
@@ -677,6 +682,7 @@
/* ASF Subsystem Registers (Yukon-2 only) */
#define B28_Y2_SMB_CONFIG 0x0e40 /* 32 bit ASF SMBus Config Register */
#define B28_Y2_SMB_CSD_REG 0x0e44 /* 32 bit ASF SMB Control/Status/Data */
+#define B28_Y2_CPU_WDOG 0x0e48 /* 32 bit Watchdog Register */
#define B28_Y2_ASF_IRQ_V_BASE 0x0e60 /* 32 bit ASF IRQ Vector Base */
#define B28_Y2_ASF_STAT_CMD 0x0e68 /* 32 bit ASF Status and Command Reg */
#define B28_Y2_ASF_HCU_CCSR 0x0e68 /* 32 bit ASF HCU CCSR (Yukon EX) */
@@ -918,6 +924,10 @@
#define CHIP_REV_YU_EX_A0 1 /* Chip Rev. for Yukon-2 EX A0 */
#define CHIP_REV_YU_EX_B0 2 /* Chip Rev. for Yukon-2 EX B0 */
+#define CHIP_REV_YU_SU_A0 0 /* Chip Rev. for Yukon-2 SUPR A0 */
+#define CHIP_REV_YU_SU_B0 1 /* Chip Rev. for Yukon-2 SUPR B0 */
+#define CHIP_REV_YU_SU_B1 3 /* Chip Rev. for Yukon-2 SUPR B1 */
+
/* B2_Y2_CLK_GATE 8 bit Clock Gating (Yukon-2 only) */
#define Y2_STATUS_LNK2_INAC BIT_7 /* Status Link 2 inactiv (0 = activ) */
#define Y2_CLK_GAT_LNK2_DIS BIT_6 /* Disable clock gating Link 2 */
@@ -2555,6 +2565,7 @@
struct msk_hw_stats msk_stats;
int msk_if_flags;
uint16_t msk_vtag; /* VLAN tag id. */
+ uint32_t msk_csum;
};
#define MSK_TIMEOUT 1000
--- End Message ---
