Package: hplip Version: 3.11.1-2+b1 Severity: grave Justification: renders package unusable
hplip 3.11.1-2+b1 depends on libsane-hpaio 3.11.1-2 instead of 3.11.1-2+b1 thus cannot be installed. -- Package-specific info: error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP. warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly. HP Linux Imaging and Printing System (ver. 3.11.1) Dependency/Version Check Utility ver. 14.3 Copyright (c) 2001-9 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Saving output in log file: hp-check.log Initializing. Please wait... --------------- | SYSTEM INFO | --------------- Basic system information: Linux ypig 2.6.38-2-amd64 #1 SMP Thu Apr 7 04:28:07 UTC 2011 x86_64 GNU/Linux Distribution: debian unstable Checking Python version... OK, version 2.6.6 installed Checking PyQt 4.x version... OK, version 4.8.3 installed. Checking for CUPS... Status: scheduler is running Version: 1.4.6 error_log is set to level: warn Checking for dbus/python-dbus... dbus daemon is running. python-dbus version: 0.83.1 ------------------------ | RUNTIME DEPENDENCIES | ------------------------ Checking for dependency: CUPS - Common Unix Printing System... OK, found. Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer... OK, found. Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)... OK, found. Checking for dependency: PolicyKit - Administrative policy framework... OK, found. Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4... Checking for dependency: Python DBus - Python bindings for DBus... OK, found. Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications... OK, found. Checking for dependency: Python XML libraries... OK, found. Checking for dependency: Python 2.3 or greater - Required for fax functionality... OK, found. Checking for dependency: Reportlab - PDF library for Python... Checking for dependency: SANE - Scanning library... OK, found. Checking for dependency: scanimage - Shell scanning program... OK, found. Checking for dependency: xsane - Graphical scanner frontend for SANE... OK, found. ---------------------- | HPLIP INSTALLATION | ---------------------- Currently installed HPLIP version... HPLIP 3.11.1 currently installed in '/usr/share/hplip'. Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.11.1 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hplip/HP ppdbase=/usr/share/ppd/hplip doc=/usr/share/doc/hplip-doc/HTML icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv # Following values are determined at configure time and cannot be changed. [configure] network-build=yes pp-build=yes gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=yes foomatic-drv-install=yes foomatic-ppd-install=yes foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.11.1.19 restricted-build=no ui-toolkit=qt4 qt3=no qt4=yes policy-kit=yes hpijs-only-build=no lite-build=no udev-acl-rules=yes hpcups-only-build=no hpijs-only-build=no Current contents of '/var/lib/hp/hplip.state' file: # hplip.state - HPLIP runtime persistent variables. [plugin] installed=0 eula=0 Current contents of '~/.hplip/hplip.conf' file: [installation] version = 3.11.1.19 date_time = 04/13/11 11:26:56 -------------------------- | DISCOVERED USB DEVICES | -------------------------- No devices found. --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- isc-guest-printer ----------------- Type: Unknown Device URI: lpd://localhost/isc-mono-1-physical isc-mono-1 ---------- Type: Unknown Device URI: lpd://localhost/isc-mono-1-physical isc-mono-1-physical ------------------- Type: Unknown Device URI: lpd://liplr5 ixxi-guest-printer ------------------ Type: Unknown Device URI: lpd://localhost/ixxi-mono-1-physical ixxi-mono-1 ----------- Type: Unknown Device URI: lpd://localhost/ixxi-mono-1-physical ixxi-mono-1-physical -------------------- Type: Unknown Device URI: lpd://liplr5 ixxi-multi-1-mono-A3 -------------------- Type: Unknown Device URI: lpd://localhost/ixxi-multi-1-mono-A3-physical ixxi-multi-1-mono-A3-physical ----------------------------- Type: Unknown Device URI: lpd://ixxi-multi-1.lip.ens-lyon.fr/ixxi.multi-1-mono-A3 ixxi-multi-1-mono-A4 -------------------- Type: Unknown Device URI: lpd://localhost/ixxi-multi-1-mono-A4-physical ixxi-multi-1-mono-A4-physical ----------------------------- Type: Unknown Device URI: lpd://ixxi-multi-1.lip.ens-lyon.fr/ixxi-multi-1-mono-A4 lip-color-1 ----------- Type: Unknown Device URI: lpd://localhost/lip-color-1-physical lip-color-1-A3 -------------- Type: Unknown Device URI: lpd://localhost/lip-color-1-physical lip-color-1-A4 -------------- Type: Unknown Device URI: lpd://localhost/lip-color-1-physical lip-color-1-physical -------------------- Type: Unknown Device URI: lpd://lipc lip-color-1-trans ----------------- Type: Unknown Device URI: lpd://localhost/lip-color-1-physical lip-guest-printer ----------------- Type: Unknown Device URI: lpd://localhost/lip-multi-1-mono-A4-physical lip-mono-1 ---------- Type: Unknown Device URI: lpd://localhost/lip-mono-1-physical lip-mono-1-physical ------------------- Type: Unknown Device URI: lpd://printerbocal lip-mono-2 ---------- Type: Unknown Device URI: lpd://localhost/lip-mono-2-physical lip-mono-2-physical ------------------- Type: Unknown Device URI: lpd://lwi2 lip-multi-1-color-A3 -------------------- Type: Unknown Device URI: lpd://localhost/lip-multi-1-color-A3-physical lip-multi-1-color-A3-physical ----------------------------- Type: Unknown Device URI: lpd://ricoh1/lip-multi-1-color-A3 lip-multi-1-color-A4 -------------------- Type: Unknown Device URI: lpd://localhost/lip-multi-1-color-A4-physical lip-multi-1-color-A4-physical ----------------------------- Type: Unknown Device URI: lpd://ricoh1/lip-multi-1-color-A4 lip-multi-1-mono-A4 ------------------- Type: Unknown Device URI: lpd://localhost/lip-multi-1-mono-A4-physical lip-multi-1-mono-A4-physical ---------------------------- Type: Unknown Device URI: lpd://ricoh1/lip-multi-1-mono-A4 lip-multi-1-physical -------------------- Type: Unknown Device URI: lpd://ricoh1 lipucb-guest-printer -------------------- Type: Unknown Device URI: lpd://localhost/lipucb-mono-1-physical lipucb-mono-1 ------------- Type: Unknown Device URI: lpd://localhost/lipucb-mono-1-physical lipucb-mono-1-physical ---------------------- Type: Unknown Device URI: lpd://140.77.14.14/ lipucb-multi-color-A3 --------------------- Type: Unknown Device URI: lpd://localhost/lipucb-multi-color-A3-physical lipucb-multi-color-A3-physical ------------------------------ Type: Unknown Device URI: lpd://lip-multi-2.lip.ens-lyon.fr/lipucb-multi-color-A3 lipucb-multi-color-A4 --------------------- Type: Unknown Device URI: lpd://localhost/lipucb-multi-color-A4-physical lipucb-multi-color-A4-physical ------------------------------ Type: Unknown Device URI: lpd://lip-multi-2.lip.ens-lyon.fr/lipucb-multi-color-A4 lipucb-multi-mono-A4 -------------------- Type: Unknown Device URI: lpd://localhost/lipucb-multi-mono-A4-physical lipucb-multi-mono-A4-physical ----------------------------- Type: Unknown Device URI: lpd://lip-multi-2.lip.ens-lyon.fr/lipucb-multi-mono-A4 reso ---- Type: Unknown Device URI: lpd://localhost/reso-physical reso-physical -----warning: Device URI: (Makeuri FAILED) warning: Device URI: (Makeuri FAILED) error: User needs to be member of group 'lp' to enable print, scan & fax. error: User needs to be member of group 'lpadmin' to manage printers. error: 2 errors and/or warnings. -------- Type: Unknown Device URI: lpd://printer-reso.lip.ens-lyon.fr/queue ---------------------- | SANE CONFIGURATION | ---------------------- 'hpaio' in '/etc/sane.d/dll.conf'... 'hpaio' in '/etc/sane.d/dll.d/hplip'... OK, found. SANE backend 'hpaio' is properly set up. Checking output of 'scanimage -L'... No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). --------------------- | PYTHON EXTENSIONS | --------------------- Checking 'cupsext' CUPS extension... OK, found. Checking 'pcardext' Photocard extension... OK, found. Checking 'hpmudext' I/O extension... OK, found. Checking 'scanext' SANE scanning extension... OK, found. ----------------- | USB I/O SETUP | ----------------- Checking for permissions of USB attached printers... HP Device 0x2f24 at 002:002: HP Device 0x24 at 002:004: --------------- | USER GROUPS | --------------- vlefevre adm dialout cdrom floppy audio video plugdev Debian-exim scanner netdev bluetooth fuse powerdev ----------- | SUMMARY | ----------- Please refer to the installation instructions at: http://hplip.sourceforge.net/install/index.html Done. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.38-2-amd64 (SMP w/8 CPU cores) Locale: LANG=POSIX, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages hplip depends on: ii adduser 3.112+nmu2 add and remove users and groups ii coreutils 8.5-1 GNU core utilities ii cups 1.4.6-4 Common UNIX Printing System(tm) - ii cups-client 1.4.6-4 Common UNIX Printing System(tm) - ii hplip-cups 3.11.1-2 HP Linux Printing and Imaging - CU ii hplip-data 3.11.1-2 HP Linux Printing and Imaging - da ii libc6 2.11.2-13 Embedded GNU C Library: Shared lib ii libcups2 1.4.6-4 Common UNIX Printing System(tm) - ii libdbus-1-3 1.4.6-1 simple interprocess messaging syst ii libhpmud0 3.11.1-2 HP Multi-Point Transport Driver (h ii libsane 1.0.22-2 API library for scanners ii libsane-hpaio 3.11.1-2 HP SANE backend for multi-function ii libssl0.9.8 0.9.8o-7 SSL shared libraries ii lsb-base 3.2-27 Linux Standard Base 3.2 init scrip ii policykit-1 0.101-3 framework for managing administrat ii python 2.6.6-12 interactive high-level object-orie ii python-dbus 0.83.1-1 simple interprocess messaging syst ii python-imaging 1.1.7-2 Python Imaging Library ii python-pexpect 2.3-1 Python module for automating inter ii python-support 1.0.11 automated rebuilding support for P Versions of packages hplip recommends: ii avahi-daemon 0.6.30-2 Avahi mDNS/DNS-SD daemon ii sane-utils 1.0.22-2 API library for scanners -- utilit Versions of packages hplip suggests: pn hplip-doc <none> (no description available) pn hplip-gui <none> (no description available) ii python-notify 0.1.1-2+b2 Python bindings for libnotify pn system-config-printer <none> (no description available) -- Configuration Files: /etc/hp/hplip.conf changed [not included] -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
