Your message dated Fri, 03 Dec 2010 22:02:06 +0000
with message-id <e1podhe-0006pi...@franck.debian.org>
and subject line Bug#605811: fixed in libio-async-loop-epoll-perl 0.08-1
has caused the Debian Bug report #605811,
regarding FTBFS: failed tests
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
605811: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=605811
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Source: libio-async-loop-epoll-perl
Version: 0.07-1
Severity: serious
Tags: sid
Justification: FTBFS
Hi
libio-async-loop-epoll-perl FTBFS in unstable but not in squeeze.
Attached is the full buildlog for unstable.
Bests
Salvatore
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-2-amd64 (SMP w/8 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Automatic build of libio-async-loop-epoll-perl_0.07-1 on elende by sbuild/amd64
0.57.7
Build started at 20101203-1830
******************************************************************************
Hit http://ftp.ch.debian.org sid Release.gpg
Ign http://ftp.ch.debian.org/debian/ sid/main Translation-en
Hit http://ftp.ch.debian.org sid Release
Hit http://ftp.ch.debian.org sid/main Sources/DiffIndex
Hit http://ftp.ch.debian.org sid/main amd64 Packages/DiffIndex
Reading package lists...
libio-async-loop-epoll-perl_0.07-1.dsc exists in .; copying to chroot
** Using build dependencies supplied by package:
Build-Depends: debhelper (>= 7)
Build-Depends-Indep: perl, libio-epoll-perl (>= 0.02), libtest-refcount-perl,
libtest-exception-perl, libio-async-perl (>= 0.24)
Checking for already installed source dependencies...
debhelper: missing
Using default version 8.0.0
perl: already installed (5.10.1-16)
libio-epoll-perl: missing
Using default version 0.02-1
libtest-refcount-perl: missing
libtest-exception-perl: missing
libio-async-perl: missing
Using default version 0.30-1
Checking for source dependency conflicts...
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
bsdmainutils file gettext gettext-base groff-base html2text intltool-debian
libasync-mergepoint-perl libcroco3 libdevel-refcount-perl libglib2.0-0
libheap-perl libmagic1 libpcre3 libsocket-getaddrinfo-perl
libsub-uplevel-perl libunistring0 libxml2 man-db po-debconf
Suggested packages:
wamerican wordlist whois vacation dh-make gettext-doc groff
libdevel-findref-perl less www-browser libmail-box-perl
Recommended packages:
curl wget lynx-cur autopoint libglib2.0-data shared-mime-info xml-core
libmail-sendmail-perl
The following NEW packages will be installed:
bsdmainutils debhelper file gettext gettext-base groff-base html2text
intltool-debian libasync-mergepoint-perl libcroco3 libdevel-refcount-perl
libglib2.0-0 libheap-perl libio-async-perl libio-epoll-perl libmagic1
libpcre3 libsocket-getaddrinfo-perl libsub-uplevel-perl
libtest-exception-perl libtest-refcount-perl libunistring0 libxml2 man-db
po-debconf
debconf: delaying package configuration, since apt-utils is not installed
0 upgraded, 25 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/9319 kB of archives.
After this operation, 28.3 MB of additional disk space will be used.
Selecting previously deselected package bsdmainutils.
(Reading database ... 10174 files and directories currently installed.)
Unpacking bsdmainutils (from .../bsdmainutils_8.0.17_amd64.deb) ...
Selecting previously deselected package groff-base.
Unpacking groff-base (from .../groff-base_1.20.1-10_amd64.deb) ...
Selecting previously deselected package man-db.
Unpacking man-db (from .../man-db_2.5.7-6_amd64.deb) ...
Selecting previously deselected package libmagic1.
Unpacking libmagic1 (from .../libmagic1_5.04-5_amd64.deb) ...
Selecting previously deselected package file.
Unpacking file (from .../archives/file_5.04-5_amd64.deb) ...
Selecting previously deselected package gettext-base.
Unpacking gettext-base (from .../gettext-base_0.18.1.1-3_amd64.deb) ...
Selecting previously deselected package libpcre3.
Unpacking libpcre3 (from .../libpcre3_8.02-1.1_amd64.deb) ...
Selecting previously deselected package libxml2.
Unpacking libxml2 (from .../libxml2_2.7.8.dfsg-1_amd64.deb) ...
Selecting previously deselected package html2text.
Unpacking html2text (from .../html2text_1.3.2a-15_amd64.deb) ...
Selecting previously deselected package libglib2.0-0.
Unpacking libglib2.0-0 (from .../libglib2.0-0_2.24.2-1_amd64.deb) ...
Selecting previously deselected package libcroco3.
Unpacking libcroco3 (from .../libcroco3_0.6.2-1_amd64.deb) ...
Selecting previously deselected package libunistring0.
Unpacking libunistring0 (from .../libunistring0_0.9.3-3_amd64.deb) ...
Selecting previously deselected package gettext.
Unpacking gettext (from .../gettext_0.18.1.1-3_amd64.deb) ...
Selecting previously deselected package intltool-debian.
Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb)
...
Selecting previously deselected package po-debconf.
Unpacking po-debconf (from .../po-debconf_1.0.16+nmu1_all.deb) ...
Selecting previously deselected package debhelper.
Unpacking debhelper (from .../debhelper_8.0.0_all.deb) ...
Selecting previously deselected package libasync-mergepoint-perl.
Unpacking libasync-mergepoint-perl (from
.../libasync-mergepoint-perl_0.02-1_all.deb) ...
Selecting previously deselected package libdevel-refcount-perl.
Unpacking libdevel-refcount-perl (from
.../libdevel-refcount-perl_0.07-1_amd64.deb) ...
Selecting previously deselected package libheap-perl.
Unpacking libheap-perl (from .../libheap-perl_0.80-2_all.deb) ...
Selecting previously deselected package libsocket-getaddrinfo-perl.
Unpacking libsocket-getaddrinfo-perl (from
.../libsocket-getaddrinfo-perl_0.19-1_amd64.deb) ...
Selecting previously deselected package libio-async-perl.
Unpacking libio-async-perl (from .../libio-async-perl_0.30-1_all.deb) ...
Selecting previously deselected package libio-epoll-perl.
Unpacking libio-epoll-perl (from .../libio-epoll-perl_0.02-1_amd64.deb) ...
Selecting previously deselected package libsub-uplevel-perl.
Unpacking libsub-uplevel-perl (from .../libsub-uplevel-perl_0.2200-1_all.deb)
...
Selecting previously deselected package libtest-exception-perl.
Unpacking libtest-exception-perl (from
.../libtest-exception-perl_0.31-1_all.deb) ...
Selecting previously deselected package libtest-refcount-perl.
Unpacking libtest-refcount-perl (from .../libtest-refcount-perl_0.06-1_all.deb)
...
Setting up bsdmainutils (8.0.17) ...
update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write)
in auto mode.
update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in
auto mode.
Setting up groff-base (1.20.1-10) ...
Setting up man-db (2.5.7-6) ...
Building database of manual pages ...
Setting up libmagic1 (5.04-5) ...
Setting up file (5.04-5) ...
Setting up gettext-base (0.18.1.1-3) ...
Setting up libpcre3 (8.02-1.1) ...
Setting up libxml2 (2.7.8.dfsg-1) ...
Setting up html2text (1.3.2a-15) ...
Setting up libglib2.0-0 (2.24.2-1) ...
Setting up libcroco3 (0.6.2-1) ...
Setting up libunistring0 (0.9.3-3) ...
Setting up gettext (0.18.1.1-3) ...
Setting up intltool-debian (0.35.0+20060710.1) ...
Setting up po-debconf (1.0.16+nmu1) ...
Setting up debhelper (8.0.0) ...
Setting up libasync-mergepoint-perl (0.02-1) ...
Setting up libdevel-refcount-perl (0.07-1) ...
Setting up libheap-perl (0.80-2) ...
Setting up libsocket-getaddrinfo-perl (0.19-1) ...
Setting up libio-async-perl (0.30-1) ...
Setting up libio-epoll-perl (0.02-1) ...
Setting up libsub-uplevel-perl (0.2200-1) ...
Setting up libtest-exception-perl (0.31-1) ...
Setting up libtest-refcount-perl (0.06-1) ...
Checking correctness of source dependencies...
Kernel: Linux 2.6.26-2-amd64 amd64 (x86_64)
Toolchain package versions: libc6-dev_2.11.2-7 linux-libc-dev_2.6.32-28
gcc-4.4_4.4.5-10 g++-4.4_4.4.5-10 binutils_2.20.1-15
libstdc++6-4.4-dev_4.4.5-10 libstdc++6_4.4.5-10
------------------------------------------------------------------------------
dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2
dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor):
dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2
dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2
dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor):
dpkg-buildpackage: source package libio-async-loop-epoll-perl
dpkg-buildpackage: source version 0.07-1
dpkg-buildpackage: source changed by Jonathan Yu <jaw...@cpan.org>
dpkg-source --before-build libio-async-loop-epoll-perl-0.07-1
dpkg-buildpackage: host architecture amd64
/usr/bin/fakeroot debian/rules clean
dh clean
dh_testdir
dh_auto_clean
dh_clean
debian/rules build
dh build
dh_testdir
dh_auto_configure
Checking if your kit is complete...
Looks good
'CREATE_PACKLIST' is not a known MakeMaker parameter name.
Writing Makefile for IO::Async::Loop::Epoll
dh_auto_build
make[1]: Entering directory
`/build/salvi-libio-async-loop-epoll-perl_0.07-1-amd64-i583OH/libio-async-loop-epoll-perl-0.07-1'
cp lib/IO/Async/Loop/Epoll.pm blib/lib/IO/Async/Loop/Epoll.pm
Manifying blib/man3/IO::Async::Loop::Epoll.3pm
make[1]: Leaving directory
`/build/salvi-libio-async-loop-epoll-perl_0.07-1-amd64-i583OH/libio-async-loop-epoll-perl-0.07-1'
dh_auto_test
make[1]: Entering directory
`/build/salvi-libio-async-loop-epoll-perl_0.07-1-amd64-i583OH/libio-async-loop-epoll-perl-0.07-1'
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0,
'blib/lib', 'blib/arch')" t/*.t
t/00use.t ........... ok
# Failed test 'exceptional socket invokes on_read_ready'
# at /usr/share/perl5/IO/Async/LoopTests.pm line 281.
# got: '0'
# expected: '1'
# Looks like you failed 1 test of 14.
t/01loop-io.t .......
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/14 subtests
t/02loop-timer.t .... ok
t/03loop-signal.t ... ok
t/04loop-idle.t ..... ok
t/05loop-child.t .... ok
t/06loop-control.t .. ok
t/99pod.t ........... skipped: Test::Pod 1.00 required for testing POD
Test Summary Report
-------------------
t/01loop-io.t (Wstat: 256 Tests: 14 Failed: 1)
Failed test: 13
Non-zero exit status: 1
Files=8, Tests=65, 10 wallclock secs ( 0.05 usr 0.01 sys + 0.49 cusr 0.06
csys = 0.61 CPU)
Result: FAIL
Failed 1/8 test programs. 1/65 subtests failed.
make[1]: *** [test_dynamic] Error 255
make[1]: Leaving directory
`/build/salvi-libio-async-loop-epoll-perl_0.07-1-amd64-i583OH/libio-async-loop-epoll-perl-0.07-1'
dh_auto_test: make -j1 test returned exit code 2
make: *** [build] Error 29
dpkg-buildpackage: error: debian/rules build gave error exit status 2
******************************************************************************
Build finished at 20101203-1830
FAILED [dpkg-buildpackage died]
------------------------------------------------------------------------------
(Reading database ... 11578 files and directories currently installed.)
Removing libtest-refcount-perl ...
Removing debhelper ...
Removing po-debconf ...
Removing libio-epoll-perl ...
Removing libio-async-perl ...
Removing libdevel-refcount-perl ...
Removing libheap-perl ...
Removing man-db ...
Purging configuration files for man-db ...
Removing catpages as well as /var/cache/man hierarchy.
Removing libtest-exception-perl ...
Removing libsub-uplevel-perl ...
Removing intltool-debian ...
Removing groff-base ...
Purging configuration files for groff-base ...
Removing gettext ...
Removing file ...
Removing libsocket-getaddrinfo-perl ...
Removing html2text ...
Purging configuration files for html2text ...
Removing libasync-mergepoint-perl ...
Removing gettext-base ...
Removing libunistring0 ...
Purging configuration files for libunistring0 ...
Removing libcroco3 ...
Purging configuration files for libcroco3 ...
Removing libmagic1 ...
Purging configuration files for libmagic1 ...
Removing libxml2 ...
Purging configuration files for libxml2 ...
Removing bsdmainutils ...
Purging configuration files for bsdmainutils ...
Removing libglib2.0-0 ...
Purging configuration files for libglib2.0-0 ...
Removing libpcre3 ...
Purging configuration files for libpcre3 ...
******************************************************************************
Finished at 20101203-1830
Build needed 00:00:24, 260k disk space
--- End Message ---
--- Begin Message ---
Source: libio-async-loop-epoll-perl
Source-Version: 0.08-1
We believe that the bug you reported is fixed in the latest version of
libio-async-loop-epoll-perl, which is due to be installed in the Debian FTP
archive:
libio-async-loop-epoll-perl_0.08-1.debian.tar.gz
to
main/libi/libio-async-loop-epoll-perl/libio-async-loop-epoll-perl_0.08-1.debian.tar.gz
libio-async-loop-epoll-perl_0.08-1.dsc
to
main/libi/libio-async-loop-epoll-perl/libio-async-loop-epoll-perl_0.08-1.dsc
libio-async-loop-epoll-perl_0.08-1_all.deb
to
main/libi/libio-async-loop-epoll-perl/libio-async-loop-epoll-perl_0.08-1_all.deb
libio-async-loop-epoll-perl_0.08.orig.tar.gz
to
main/libi/libio-async-loop-epoll-perl/libio-async-loop-epoll-perl_0.08.orig.tar.gz
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 605...@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Salvatore Bonaccorso <car...@debian.org> (supplier of updated
libio-async-loop-epoll-perl package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmas...@debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Format: 1.8
Date: Fri, 03 Dec 2010 22:41:31 +0100
Source: libio-async-loop-epoll-perl
Binary: libio-async-loop-epoll-perl
Architecture: source all
Version: 0.08-1
Distribution: unstable
Urgency: low
Maintainer: Debian Perl Group <pkg-perl-maintain...@lists.alioth.debian.org>
Changed-By: Salvatore Bonaccorso <car...@debian.org>
Description:
libio-async-loop-epoll-perl - Perl extension for an event loop using epoll
Closes: 605811
Changes:
libio-async-loop-epoll-perl (0.08-1) unstable; urgency=low
.
* Team upload.
* New upstream release
- Fixes FTBFS (Closes: #605811)
* Refresh debian/copyright:
- Explicitly refer to GPL-1 licence text in common-licenses.
- Refer to Debian systems in general instead of only Debian GNU/Linux
systems.
* Bump Debehlper compat level to 8. Use now Build.PL.
* debian/control:
- Bump versioned Build-Depends on debhelper (>= 8).
- Move perl to Build-Depends for Module::Build.
* Bump Standards-Version to 3.9.1.
* Convert to '3.0 (quilt)' source package format.
Checksums-Sha1:
314a5c32839240ac5e1ecb5aa1ad6513ef55a249 2179
libio-async-loop-epoll-perl_0.08-1.dsc
187ec655a6c652168ef1b8ff4a5c992d6598ed1b 14009
libio-async-loop-epoll-perl_0.08.orig.tar.gz
a5319deb6ae0b13cde7e0f915c9671bda287192a 2178
libio-async-loop-epoll-perl_0.08-1.debian.tar.gz
bfc8807f66ccf420257f2641aa0ec1167d83bb2c 9102
libio-async-loop-epoll-perl_0.08-1_all.deb
Checksums-Sha256:
a2bd655e556b9ca60d1a396628f04a190040141fa143ee63f90ab3d401ac7de3 2179
libio-async-loop-epoll-perl_0.08-1.dsc
b2316525984aedbdb450e3090af31c41797858c9bee39b90a0344af8b5fbffb5 14009
libio-async-loop-epoll-perl_0.08.orig.tar.gz
b6bb53fec412f3a9179614a8e1539d383f42666f29e0046eac5c25027c91aa72 2178
libio-async-loop-epoll-perl_0.08-1.debian.tar.gz
879915270f4ac9bde7c105364b1732ea0e73881ab81c2aaf5a19da109db6a1ee 9102
libio-async-loop-epoll-perl_0.08-1_all.deb
Files:
b602c0563f78ac3ef6a70f4a29da13c9 2179 perl optional
libio-async-loop-epoll-perl_0.08-1.dsc
d311e2e4c0206eb2fcc6376805a1f2ca 14009 perl optional
libio-async-loop-epoll-perl_0.08.orig.tar.gz
8753c2a1a2ed5195af73498cbfd8c7a0 2178 perl optional
libio-async-loop-epoll-perl_0.08-1.debian.tar.gz
b19a97a42cc6fbea0a7ac31a2b8c905b 9102 perl optional
libio-async-loop-epoll-perl_0.08-1_all.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=4bFW
-----END PGP SIGNATURE-----
--- End Message ---
