Package: fglrx-driver
Version: 1:10-5-1
--- Please enter the report below this line. ---
I can add that this version works absolutely perfect on the same system unable
to run 10-6.
--- System information. ---
Architecture: i386
Kernel: Linux 2.6.32-5-686
Debian Release: squeeze/sid
900 testing debian
500 maemo5-sdk scratchbox.org
200 stable debian
100 unstable debian
--- Package information. ---
Depends (Version) | Installed
=================================-+-==============
debconf (>= 0.5) | 1.5.32
OR debconf-2.0 |
libc6 (>= 2.3.6-6~) | 2.11.2-2
libgcc1 (>= 1:4.1.1) | 1:4.4.4-5
libgl1-mesa-glx | 7.7.1-3
OR libgl1 |
OR fglrx-glx | 1:10-5-1
libx11-6 | 2:1.3.3-3
libxext6 | 2:1.1.1-3
libxinerama1 | 2:1.1-3
libxrandr2 | 2:1.3.0-3
libxrender1 | 1:0.9.5-2
xserver-xorg (>= 1:7.5+1) | 1:7.5+6
laptop-detect | 0.13.7
Recommends (Version) | Installed
====================================-+-==============
fglrx-modules-dkms (= 1:10-5-1) | 1:10-5-1
OR fglrx-source (= 1:10-5-1) | 1:10-6-1
fglrx-glx | 1:10-5-1
fglrx-atieventsd | 1:10-5-1
Suggests (Version) | Installed
============================-+-===========
fglrx-control | 1:10-5-1
--- Output from package bug script ---
VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3600
Series
DRM and fglrx Informations from dmesg:
[ 1.060399] Linux agpgart interface v0.103
[ 13.497458] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies,
Starnberg, GERMANY' taints kernel.
[ 13.592381] [fglrx] Maximum main memory to use for locked dma buffers: 1895
MBytes.
[ 13.592501] [fglrx] vendor: 1002 device: 9598 count: 1
[ 13.592800] [fglrx] ioport: bar 4, base 0xe000, size: 0x100
[ 13.594055] [fglrx] Kernel PAT support is enabled
[ 13.594075] [fglrx] module loaded - fglrx 8.73.3 [May 4 2010] with 1 minors
[ 100.993939] fglrx_pci 0000:01:00.0: irq 28 for MSI/MSI-X
[ 100.994615] [fglrx] Firegl kernel thread PID: 2796
[ 100.994775] [fglrx] IRQ 28 Enabled
[ 103.622991] [fglrx] Gart USWC size:632 M.
[ 103.622994] [fglrx] Gart cacheable size:248 M.
[ 103.622998] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 103.623001] [fglrx] Reserved FB block: Unshared offset:fe03000, size:1fd000
[ 103.623003] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000
Xorg X server configuration file status:
-rw-r--r-- 1 root root 721 Jul 1 09:31 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
# Configuration for xorg using Radeon driver and dual-head setup
Section "Monitor"
Identifier "DVI-0"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "DVI-1"
Option "RightOf" "DVI-0"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "ATI"
Driver "fglrx"
Option "AccelMethod" "EXA"
Option "Monitor-DVI-I_1/digital" "DVI-0"
Option "Monitor-DVI-I_2/digital" "DVI-1"
Option "Monitor-DFP1" "DVI-0"
Option "Monitor-DFP2" "DVI-1"
EndSection
Section "Screen"
Identifier "Dual"
Device "ATI"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024"
Virtual 2560 2560
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Dual Head Layout"
Screen "Dual"
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 23360 Jul 1 09:34 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.14-dsa-ia32 i686 Debian
Current Operating System: Linux ncpws04 2.6.32-5-686 #1 SMP Tue Jun 1 04:59:47
UTC 2010 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-686
root=/dev/mapper/sysvg-root ro vga=0x366 rootdelay=10 elevator=as quiet
Build Date: 03 June 2010 04:08:50PM
xorg-server 2:1.7.7-2 (Julien Cristau <jcris...@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 1 09:34:09 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Dual Head Layout"
(**) |-->Screen "Dual" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "ATI"
(==) No monitor specified for screen "Dual".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
(II) Loader magic: 0x81eac60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 1002:9598:1462:1190 ATI Technologies Inc Mobility Radeon HD
3600 Series rev 0, Mem @ 0xc0000000/268435456, 0xd0020000/65536, I/O @
0x0000e000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.5.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.73.3
Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.73.3
(II) ATI Proprietary Linux Driver Version Identifier:8.73.3
(II) ATI Proprietary Linux Driver Release Identifier: 8.732
(II) ATI Proprietary Linux Driver Build Date: May 4 2010 21:16:04
(II) Primary Device is: PCI 0...@00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Assigning device section with no busID to primary device
(--) Chipset Supported AMD Graphics Processor (0x9598) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0...@1:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for
this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0x89b6430
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
ukiDynamicMajor: found major device number 252
ukiDynamicMajor: found major device number 252
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 11, (OK)
ukiOpenByBusid: ukiOpenMinor returns 11
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(==) fglrx(0): NoAccel = NO
(--) fglrx(0): Chipset: "ATI Radeon HD 3600 Series " (Chipset = 0x9598)
(--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x1190)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original
ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
(--) fglrx(0): MMIO registers at 0xd0020000
(--) fglrx(0): I/O port at 0x0000e000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.77
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: RV635
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x20000000)
(II) fglrx(0): Interrupt handler installed at IRQ 28.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Finished Initialize PPLIB!
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display0: DFP on internal TMDS [tmds1]
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: VSC Model: 4e1c Serial#: 16843009
(II) fglrx(0): Year: 2006 Week: 19
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): Default color space is primary color space
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.643 redY: 0.346 greenX: 0.285 greenY: 0.595
(II) fglrx(0): blueX: 0.142 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x...@70hz
(II) fglrx(0): 640x...@60hz
(II) fglrx(0): 640x...@67hz
(II) fglrx(0): 640x...@72hz
(II) fglrx(0): 640x...@75hz
(II) fglrx(0): 800x...@56hz
(II) fglrx(0): 800x...@60hz
(II) fglrx(0): 800x...@72hz
(II) fglrx(0): 800x...@75hz
(II) fglrx(0): 832x...@75hz
(II) fglrx(0): 1024x...@60hz
(II) fglrx(0): 1024x...@70hz
(II) fglrx(0): 1024x...@75hz
(II) fglrx(0): 1152x...@75hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) fglrx(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) fglrx(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #4: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #5: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) fglrx(0): #6: hsize: 640 vsize 400 refresh: 70 vid: 2609
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688
h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066
v_border: 0
(II) fglrx(0): Serial No: PUR061904710
(II) fglrx(0): Ranges: V min: 50 V max: 85 Hz, H min: 30 H max: 82 kHz,
PixClock max 140 MHz
(II) fglrx(0): Monitor name: VA912-3SERIES
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff005a631c4e01010101
(II) fglrx(0): 1310010380261e782ea165a458499824
(II) fglrx(0): 115054bfee8081808140714f61594559
(II) fglrx(0): 3159310a0101302a009851002a403070
(II) fglrx(0): 1300782d1100001e000000ff00505552
(II) fglrx(0): 3036313930343731300a000000fd0032
(II) fglrx(0): 551e520e000a202020202020000000fc
(II) fglrx(0): 0056413931322d33534552494553009a
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): Connected Display1: DFP on secondary TMDS [tmds2i]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: VSC Model: 4e1c Serial#: 16843009
(II) fglrx(0): Year: 2006 Week: 19
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): Default color space is primary color space
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.643 redY: 0.346 greenX: 0.285 greenY: 0.595
(II) fglrx(0): blueX: 0.142 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x...@70hz
(II) fglrx(0): 640x...@60hz
(II) fglrx(0): 640x...@67hz
(II) fglrx(0): 640x...@72hz
(II) fglrx(0): 640x...@75hz
(II) fglrx(0): 800x...@56hz
(II) fglrx(0): 800x...@60hz
(II) fglrx(0): 800x...@72hz
(II) fglrx(0): 800x...@75hz
(II) fglrx(0): 832x...@75hz
(II) fglrx(0): 1024x...@60hz
(II) fglrx(0): 1024x...@70hz
(II) fglrx(0): 1024x...@75hz
(II) fglrx(0): 1152x...@75hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) fglrx(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) fglrx(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #4: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #5: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) fglrx(0): #6: hsize: 640 vsize 400 refresh: 70 vid: 2609
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688
h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066
v_border: 0
(II) fglrx(0): Serial No: PUR061904714
(II) fglrx(0): Ranges: V min: 50 V max: 85 Hz, H min: 30 H max: 82 kHz,
PixClock max 140 MHz
(II) fglrx(0): Monitor name: VA912-3SERIES
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff005a631c4e01010101
(II) fglrx(0): 1310010380261e782ea165a458499824
(II) fglrx(0): 115054bfee8081808140714f61594559
(II) fglrx(0): 3159310a0101302a009851002a403070
(II) fglrx(0): 1300782d1100001e000000ff00505552
(II) fglrx(0): 3036313930343731340a000000fd0032
(II) fglrx(0): 551e520e000a202020202020000000fc
(II) fglrx(0): 0056413931322d335345524945530096
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Output DFP1 using monitor section DVI-0
(II) fglrx(0): Output DFP2 using monitor section DVI-1
(**) fglrx(0): Option "RightOf" "DVI-0"
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): Output CRT2 has no monitor section
(II) fglrx(0): Output TV has no monitor section
(II) fglrx(0): Output COMPONENT_VIDEO has no monitor section
(II) fglrx(0): Output DFP1 connected
(II) fglrx(0): Output DFP2 connected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Output CRT2 disconnected
(II) fglrx(0): Output TV disconnected
(II) fglrx(0): Output COMPONENT_VIDEO disconnected
(II) fglrx(0): Using user preference for initial modes
(II) fglrx(0): Output DFP1 using initial mode 1280x1024
(II) fglrx(0): Output DFP2 using initial mode 1280x1024
(II) fglrx(0): DPI set to (96, 96)
(II) fglrx(0): Adapter ATI Radeon HD 3600 Series has 2 configurable heads and
2 displays connected.
(WW) fglrx(0): Big Desktop related functionalities are replaced by RandR 1.2!
(==) fglrx(0): QBS disabled
(==) fglrx(0): PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing swlDriScreenInit
(II) fglrx(0): swlDriScreenInit for fglrx driver
ukiDynamicMajor: found major device number 252
ukiDynamicMajor: found major device number 252
ukiDynamicMajor: found major device number 252
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 17, (OK)
ukiOpenByBusid: ukiOpenMinor returns 17
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) fglrx(0): [uki] DRM interface version 1.0
(II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb775e000
(II) fglrx(0): [uki] framebuffer handle = 0x3000
(II) fglrx(0): [uki] added 1 reserved context for kernel
(II) fglrx(0): swlDriScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.73.3
(II) fglrx(0): Date: May 4 2010
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.32-5-686
(II) fglrx(0): Build-Kernel MODVERSIONS: yes
(II) fglrx(0): Build-Kernel __SMP__: yes
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [uki] register handle = 0x00004000
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01b08000
(II) fglrx(0): FBMM initialized for area (0,0)-(2560,2768)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(2560,2560) (front color buffer -
assumption)
(II) fglrx(0): Largest offscreen area available: 2560 x 208
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(==) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
(II) Loading extension GLESX
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): GLESX enableFlags = 94
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(WW) fglrx(0): Option "AccelMethod" is not used
(WW) fglrx(0): Option "Monitor-DVI-I_1/digital" is not used
(WW) fglrx(0): Option "Monitor-DVI-I_2/digital" is not used
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
(II) fglrx(0): Cannot set TV horizontal size.
(II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position
after horizontal size changed.
(II) fglrx(0): Cannot set TV horizontal position.
(II) fglrx(0): Cannot set TV vertical position.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
ukiDynamicMajor: found major device number 252
ukiDynamicMajor: found major device number 252
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 18, (OK)
ukiOpenByBusid: ukiOpenMinor returns 18
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Setting screen physical size to 677 x 270
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse
(/dev/input/event5)
(**) ImExPS/2 Logitech Explorer Mouse: Applying InputClass "evdev pointer
catchall"
(**) ImExPS/2 Logitech Explorer Mouse: always reports core events
(**) ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event5"
(II) ImExPS/2 Logitech Explorer Mouse: Found 9 mouse buttons
(II) ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
(II) ImExPS/2 Logitech Explorer Mouse: Found relative axes
(II) ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse"
(type: MOUSE)
(II) ImExPS/2 Logitech Explorer Mouse: initialized for relative axes.
(II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse
(/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event3)
(II) No input driver/identifier specified (ignoring)
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2
capable environments
