Your message dated Fri, 26 Feb 2010 09:56:41 +0100
with message-id <20100226085641.ga8...@bogon.sigxcpu.org>
and subject line Re: Bug#571585: fails to install due to incorrect dependencies
in init.d LSB header
has caused the Debian Bug report #571585,
regarding fails to install due to incorrect dependencies in init.d LSB header
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
571585: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=571585
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: multipath-tools
Version: 0.4.8-15.1
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts piuparts.d.o
User: initscripts-ng-de...@lists.alioth.debian.org
Usertags: incorrect-dependency
Hi,
during a test with piuparts I noticed your package failed to install due to
incorrect dependencies in the init.d LSB header. Some debian notes are
available from at http://wiki.debian.org/LSBInitScripts
From the attached log (scroll to the bottom...):
Setting up multipath-tools (0.4.8-15.1) ...
insserv: Service module-init-tools has to be enabled to start service
multipath-tools-boot
insserv: exiting now!
update-rc.d: error: insserv rejected the script header
dpkg: error processing multipath-tools (--configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
multipath-tools
E: Sub-process /usr/bin/dpkg returned an error code (1)
regards,
Holger
Start: 2010-02-25 18:49:49 UTC
Package: multipath-tools
Priority: extra
Section: admin
Installed-Size: 636
Maintainer: Debian LVM Team <pkg-lvm-maintain...@lists.alioth.debian.org>
Architecture: amd64
Version: 0.4.8-15.1
Depends: libaio1 (>= 0.3.106-8), libc6 (>= 2.3.3), libdevmapper1.02.1 (>= 2:1.02.20), libncurses5 (>= 5.6+20071006-3), libreadline5 (>= 5.2), udev (>= 0.124), initscripts (>= 2.85-16), kpartx (>= 0.4.8-15.1), lsb-base (>= 3)
Suggests: multipath-tools-boot
Conflicts: multipath-tools-initramfs (<= 1.0.1)
Filename: pool/main/m/multipath-tools/multipath-tools_0.4.8-15.1_amd64.deb
Size: 192444
MD5sum: 299db610f53948c267dbabf70c928e45
SHA1: 824bebc6ec7ff45a05f3efefcf0d1119d3f285b3
SHA256: 413210f6d9f50533dc59fe3e21ef4b80f02c38a512a9c6a9951b25b9c0d6839b
Description: maintain multipath block device access
These tools are in charge of maintaining the disk multipath device maps and
react to path and map events.
.
If you install this package you may have to change the way you address block
devices. See README.Debian for details.
Tag: admin::kernel, interface::commandline, role::program, scope::utility, uitoolkit::ncurses
Executing: sudo /org/piuparts.debian.org/sbin/piuparts --warn-symlinks --warn-on-others --warn-on-leftovers-after-purge --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ad squeeze -b squeeze.tar.gz --mirror http://piatti.debian.org/debian/ multipath-tools
Guessed: debian
0m0.0s INFO: ------------------------------------------------------------------------------
0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile.
0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ
0m0.0s INFO: ------------------------------------------------------------------------------
0m0.0s INFO: piuparts version 0.39~201002251129 starting up.
0m0.0s INFO: Command line arguments: /org/piuparts.debian.org/sbin/piuparts --warn-symlinks --warn-on-others --warn-on-leftovers-after-purge --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ad squeeze -b squeeze.tar.gz --mirror http://piatti.debian.org/debian/ multipath-tools
0m0.0s INFO: Running on: Linux piatti 2.6.32.9-dsa-amd64 #1 SMP Tue Feb 23 18:40:58 CET 2010 x86_64
0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpfwMXTl
0m0.0s DEBUG: Unpacking squeeze.tar.gz into /org/piuparts.debian.org/tmp/tmpfwMXTl
0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpfwMXTl', '-zxf', 'squeeze.tar.gz']
0m3.0s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpfwMXTl', '-zxf', 'squeeze.tar.gz']
0m3.0s DEBUG: Created policy-rc.d and chmodded it.
0m3.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', 'update']
0m4.8s DUMP:
Get:1 http://piatti.debian.org squeeze Release.gpg [835B]
Get:2 http://piatti.debian.org squeeze Release [89.5kB]
Ign http://piatti.debian.org squeeze/main Packages/DiffIndex
Ign http://piatti.debian.org squeeze/contrib Packages/DiffIndex
Ign http://piatti.debian.org squeeze/non-free Packages/DiffIndex
Ign http://piatti.debian.org squeeze/main Packages
Ign http://piatti.debian.org squeeze/contrib Packages
Ign http://piatti.debian.org squeeze/non-free Packages
Get:3 http://piatti.debian.org squeeze/main Packages [8111kB]
Get:4 http://piatti.debian.org squeeze/contrib Packages [59.0kB]
Get:5 http://piatti.debian.org squeeze/non-free Packages [113kB]
Fetched 8374kB in 0s (9275kB/s)
Reading package lists...
0m4.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', 'update']
0m4.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'mount', '-t', 'proc', 'proc', '/proc']
0m4.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'mount', '-t', 'proc', 'proc', '/proc']
0m4.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', '-yf', 'upgrade']
0m9.2s DUMP:
Reading package lists...
Building dependency tree...
The following packages have been kept back:
libpam-modules
The following packages will be upgraded:
apt base-files e2fslibs e2fsprogs libacl1 libcomerr2 libdb4.7 libpam-runtime
libpam0g libss2 libusb-0.1-4 perl-base tzdata
13 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
Need to get 5758kB of archives.
After this operation, 774kB disk space will be freed.
Get:1 http://piatti.debian.org squeeze/main base-files 5.1 [61.4kB]
Get:2 http://piatti.debian.org squeeze/main e2fslibs 1.41.10-1 [143kB]
Get:3 http://piatti.debian.org squeeze/main e2fsprogs 1.41.10-1 [801kB]
Get:4 http://piatti.debian.org squeeze/main perl-base 5.10.1-11 [1090kB]
Get:5 http://piatti.debian.org squeeze/main apt 0.7.25.3 [1750kB]
Get:6 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-14 [21.7kB]
Get:7 http://piatti.debian.org squeeze/main libacl1 2.2.49-2 [28.2kB]
Get:8 http://piatti.debian.org squeeze/main libcomerr2 1.41.10-1 [47.6kB]
Get:9 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-1 [219kB]
Get:10 http://piatti.debian.org squeeze/main libpam0g 1.1.1-1 [118kB]
Get:11 http://piatti.debian.org squeeze/main libss2 1.41.10-1 [53.3kB]
Get:12 http://piatti.debian.org squeeze/main tzdata 2010b-1 [763kB]
Get:13 http://piatti.debian.org squeeze/main libdb4.7 4.7.25-9 [662kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 5758kB in 0s (45.7MB/s)
(Reading database ... 5972 files and directories currently installed.)
Preparing to replace base-files 5.0.0 (using .../base-files_5.1_amd64.deb) ...
Unpacking replacement base-files ...
Setting up base-files (5.1) ...
(Reading database ... 5972 files and directories currently installed.)
Preparing to replace e2fslibs 1.41.9-1 (using .../e2fslibs_1.41.10-1_amd64.deb) ...
Unpacking replacement e2fslibs ...
Setting up e2fslibs (1.41.10-1) ...
(Reading database ... 5972 files and directories currently installed.)
Preparing to replace e2fsprogs 1.41.9-1 (using .../e2fsprogs_1.41.10-1_amd64.deb) ...
Unpacking replacement e2fsprogs ...
Setting up e2fsprogs (1.41.10-1) ...
Installing new version of config file /etc/mke2fs.conf ...
(Reading database ... 5972 files and directories currently installed.)
Preparing to replace perl-base 5.10.1-9 (using .../perl-base_5.10.1-11_amd64.deb) ...
Unpacking replacement perl-base ...
Setting up perl-base (5.10.1-11) ...
(Reading database ... 5972 files and directories currently installed.)
Preparing to replace apt 0.7.25 (using .../apt_0.7.25.3_amd64.deb) ...
Unpacking replacement apt ...
Setting up apt (0.7.25.3) ...
gpg: key 6070D3A1: "Debian Archive Automatic Signing Key (4.0/etch) <ftpmas...@debian.org>" not changed
gpg: key ADB11277: "Etch Stable Release Key <debian-rele...@lists.debian.org>" not changed
gpg: key BBE55AB3: "Debian-Volatile Archive Automatic Signing Key (4.0/etch)" not changed
gpg: key F42584E6: "Lenny Stable Release Key <debian-rele...@lists.debian.org>" not changed
gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) <ftpmas...@debian.org>" not changed
gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed
gpg: Total number processed: 6
gpg: unchanged: 6
(Reading database ... 5974 files and directories currently installed.)
Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-14_amd64.deb) ...
Unpacking replacement libusb-0.1-4 ...
Setting up libusb-0.1-4 (2:0.1.12-14) ...
(Reading database ... 5974 files and directories currently installed.)
Preparing to replace libacl1 2.2.49-1 (using .../libacl1_2.2.49-2_amd64.deb) ...
Unpacking replacement libacl1 ...
Setting up libacl1 (2.2.49-2) ...
(Reading database ... 5975 files and directories currently installed.)
Preparing to replace libcomerr2 1.41.9-1 (using .../libcomerr2_1.41.10-1_amd64.deb) ...
Unpacking replacement libcomerr2 ...
Setting up libcomerr2 (1.41.10-1) ...
(Reading database ... 5975 files and directories currently installed.)
Preparing to replace libpam-runtime 1.1.0-4 (using .../libpam-runtime_1.1.1-1_all.deb) ...
Unpacking replacement libpam-runtime ...
Setting up libpam-runtime (1.1.1-1) ...
(Reading database ... 5975 files and directories currently installed.)
Preparing to replace libpam0g 1.1.0-4 (using .../libpam0g_1.1.1-1_amd64.deb) ...
Unpacking replacement libpam0g ...
Setting up libpam0g (1.1.1-1) ...
(Reading database ... 5975 files and directories currently installed.)
Preparing to replace libss2 1.41.9-1 (using .../libss2_1.41.10-1_amd64.deb) ...
Unpacking replacement libss2 ...
Setting up libss2 (1.41.10-1) ...
(Reading database ... 5975 files and directories currently installed.)
Preparing to replace tzdata 2010a-1 (using .../tzdata_2010b-1_all.deb) ...
Unpacking replacement tzdata ...
Setting up tzdata (2010b-1) ...
Current default time zone: 'Etc/UTC'
Local time is now: Thu Feb 25 18:49:58 UTC 2010.
Universal Time is now: Thu Feb 25 18:49:58 UTC 2010.
Run 'dpkg-reconfigure tzdata' if you wish to change it.
(Reading database ... 5984 files and directories currently installed.)
Preparing to replace libdb4.7 4.7.25-8 (using .../libdb4.7_4.7.25-9_amd64.deb) ...
Unpacking replacement libdb4.7 ...
Setting up libdb4.7 (4.7.25-9) ...
0m9.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', '-yf', 'upgrade']
0m9.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', 'clean']
0m9.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', 'clean']
0m9.2s DEBUG: Copying scriptsdir to /org/piuparts.debian.org/tmp/tmpfwMXTl/tmp/scripts/
0m9.2s INFO: Running scripts post_setup
0m9.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'dpkg', '--get-selections', '*']
0m9.9s DUMP:
apt install
base-files install
base-passwd install
bash install
bsdutils install
coreutils install
dash install
debconf install
debconf-i18n install
debian-archive-keyring install
debianutils install
diffutils install
dpkg install
e2fslibs install
e2fsprogs install
findutils install
gcc-4.4-base install
gnupg install
gpgv install
grep install
gzip install
hostname install
initscripts install
insserv install
libacl1 install
libattr1 install
libblkid1 install
libbz2-1.0 install
libc-bin install
libc6 install
libcomerr2 install
libdb4.7 install
libgcc1 install
liblocale-gettext-perl install
libncurses5 install
libpam-modules install
libpam-runtime install
libpam0g install
libreadline6 install
libselinux1 install
libsepol1 install
libss2 install
libstdc++6 install
libtext-charwidth-perl install
libtext-iconv-perl install
libtext-wrapi18n-perl install
libunwind7 install
libusb-0.1-4 install
libuuid1 install
login install
lsb-base install
lzma install
mawk install
mount install
ncurses-base install
ncurses-bin install
passwd install
perl-base install
readline-common install
sed install
sensible-utils install
sysv-rc install
sysvinit install
sysvinit-utils install
tar install
tzdata install
util-linux install
zlib1g install
0m9.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'dpkg', '--get-selections', '*']
0m9.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-cache', 'show', 'multipath-tools']
0m10.0s DUMP:
Package: multipath-tools
Priority: extra
Section: admin
Installed-Size: 636
Maintainer: Debian LVM Team <pkg-lvm-maintain...@lists.alioth.debian.org>
Architecture: amd64
Version: 0.4.8-15.1
Depends: libaio1 (>= 0.3.106-8), libc6 (>= 2.3.3), libdevmapper1.02.1 (>= 2:1.02.20), libncurses5 (>= 5.6+20071006-3), libreadline5 (>= 5.2), udev (>= 0.124), initscripts (>= 2.85-16), kpartx (>= 0.4.8-15.1), lsb-base (>= 3)
Suggests: multipath-tools-boot
Conflicts: multipath-tools-initramfs (<= 1.0.1)
Filename: pool/main/m/multipath-tools/multipath-tools_0.4.8-15.1_amd64.deb
Size: 192444
MD5sum: 299db610f53948c267dbabf70c928e45
SHA1: 824bebc6ec7ff45a05f3efefcf0d1119d3f285b3
SHA256: 413210f6d9f50533dc59fe3e21ef4b80f02c38a512a9c6a9951b25b9c0d6839b
Description: maintain multipath block device access
These tools are in charge of maintaining the disk multipath device maps and
react to path and map events.
.
If you install this package you may have to change the way you address block
devices. See README.Debian for details.
Tag: admin::kernel, interface::commandline, role::program, scope::utility, uitoolkit::ncurses
0m10.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-cache', 'show', 'multipath-tools']
0m10.0s DEBUG: Starting command: ['dpkg-deb', '-b', '/org/piuparts.debian.org/tmp/tmpHk4jKT/piuparts-depends-dummy']
0m10.1s DUMP:
dpkg-deb: building package `piuparts-depends-dummy' in `/org/piuparts.debian.org/tmp/tmpHk4jKT/piuparts-depends-dummy.deb'.
0m10.1s DEBUG: Command ok: ['dpkg-deb', '-b', '/org/piuparts.debian.org/tmp/tmpHk4jKT/piuparts-depends-dummy']
0m10.1s DEBUG: Copying /org/piuparts.debian.org/tmp/tmpHk4jKT/piuparts-depends-dummy.deb to /org/piuparts.debian.org/tmp/tmpfwMXTl/tmp
0m10.1s INFO: Running scripts pre_install
0m10.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb']
0m10.1s DUMP:
Selecting previously deselected package piuparts-depends-dummy.
(Reading database ... 5984 files and directories currently installed.)
Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ...
dpkg: dependency problems prevent configuration of piuparts-depends-dummy:
piuparts-depends-dummy depends on libaio1 (>= 0.3.106-8); however:
Package libaio1 is not installed.
piuparts-depends-dummy depends on libdevmapper1.02.1 (>= 2:1.02.20); however:
Package libdevmapper1.02.1 is not installed.
piuparts-depends-dummy depends on libreadline5 (>= 5.2); however:
Package libreadline5 is not installed.
piuparts-depends-dummy depends on udev (>= 0.124); however:
Package udev is not installed.
piuparts-depends-dummy depends on kpartx (>= 0.4.8-15.1); however:
Package kpartx is not installed.
dpkg: error processing piuparts-depends-dummy (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
piuparts-depends-dummy
0m10.1s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb']
0m10.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', '-yf', '--no-remove', 'install']
0m11.2s DUMP:
Reading package lists...
Building dependency tree...
Reading state information...
Correcting dependencies... Done
The following extra packages will be installed:
dmsetup kpartx libaio1 libdevmapper1.02.1 libreadline5 libudev0 udev
Recommended packages:
usbutils pciutils
The following NEW packages will be installed:
dmsetup kpartx libaio1 libdevmapper1.02.1 libreadline5 libudev0 udev
0 upgraded, 7 newly installed, 0 to remove and 1 not upgraded.
1 not fully installed or removed.
Need to get 846kB of archives.
After this operation, 2621kB of additional disk space will be used.
Get:1 http://piatti.debian.org squeeze/main libaio1 0.3.107-7 [7928B]
Get:2 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.39-1 [76.1kB]
Get:3 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB]
Get:4 http://piatti.debian.org squeeze/main libudev0 151-2 [106kB]
Get:5 http://piatti.debian.org squeeze/main udev 151-2 [434kB]
Get:6 http://piatti.debian.org squeeze/main dmsetup 2:1.02.39-1 [50.4kB]
Get:7 http://piatti.debian.org squeeze/main kpartx 0.4.8-15.1 [25.9kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 846kB in 0s (30.5MB/s)
Selecting previously deselected package libaio1.
(Reading database ... 5984 files and directories currently installed.)
Unpacking libaio1 (from .../libaio1_0.3.107-7_amd64.deb) ...
Selecting previously deselected package libdevmapper1.02.1.
Unpacking libdevmapper1.02.1 (from .../libdevmapper1.02.1_2%3a1.02.39-1_amd64.deb) ...
Selecting previously deselected package libreadline5.
Unpacking libreadline5 (from .../libreadline5_5.2-7_amd64.deb) ...
Selecting previously deselected package libudev0.
Unpacking libudev0 (from .../libudev0_151-2_amd64.deb) ...
Selecting previously deselected package udev.
Unpacking udev (from .../archives/udev_151-2_amd64.deb) ...
Selecting previously deselected package dmsetup.
Unpacking dmsetup (from .../dmsetup_2%3a1.02.39-1_amd64.deb) ...
Selecting previously deselected package kpartx.
Unpacking kpartx (from .../kpartx_0.4.8-15.1_amd64.deb) ...
Setting up libaio1 (0.3.107-7) ...
Setting up libdevmapper1.02.1 (2:1.02.39-1) ...
Setting up libreadline5 (5.2-7) ...
Setting up libudev0 (151-2) ...
Setting up udev (151-2) ...
A chroot environment has been detected, udev not started.
Setting up dmsetup (2:1.02.39-1) ...
Setting up kpartx (0.4.8-15.1) ...
Setting up piuparts-depends-dummy (0.invalid.0) ...
0m11.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', '-yf', '--no-remove', 'install']
0m11.2s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok
0m11.2s INFO: Running scripts post_install
0m11.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', 'clean']
0m11.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', 'clean']
0m11.2s DEBUG: Removing /org/piuparts.debian.org/tmp/tmpfwMXTl/tmp/piuparts-depends-dummy.deb
0m11.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'dpkg', '--purge', 'piuparts-depends-dummy']
0m11.2s DUMP:
(Reading database ... 6184 files and directories currently installed.)
Removing piuparts-depends-dummy ...
0m11.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'dpkg', '--purge', 'piuparts-depends-dummy']
0m11.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'dpkg', '--remove', '--pending']
0m11.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'dpkg', '--remove', '--pending']
0m12.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', '-y', 'install', 'multipath-tools']
0m12.8s DUMP:
Reading package lists...
Building dependency tree...
Reading state information...
Suggested packages:
multipath-tools-boot
The following NEW packages will be installed:
multipath-tools
0 upgraded, 1 newly installed, 0 to remove and 1 not upgraded.
Need to get 192kB of archives.
After this operation, 651kB of additional disk space will be used.
Get:1 http://piatti.debian.org squeeze/main multipath-tools 0.4.8-15.1 [192kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 192kB in 0s (1302kB/s)
Selecting previously deselected package multipath-tools.
(Reading database ... 6184 files and directories currently installed.)
Unpacking multipath-tools (from .../multipath-tools_0.4.8-15.1_amd64.deb) ...
Setting up multipath-tools (0.4.8-15.1) ...
insserv: Service module-init-tools has to be enabled to start service multipath-tools-boot
insserv: exiting now!
update-rc.d: error: insserv rejected the script header
dpkg: error processing multipath-tools (--configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
multipath-tools
E: Sub-process /usr/bin/dpkg returned an error code (1)
0m12.8s ERROR: Command failed (status=100): ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', '-y', 'install', 'multipath-tools']
Reading package lists...
Building dependency tree...
Reading state information...
Suggested packages:
multipath-tools-boot
The following NEW packages will be installed:
multipath-tools
0 upgraded, 1 newly installed, 0 to remove and 1 not upgraded.
Need to get 192kB of archives.
After this operation, 651kB of additional disk space will be used.
Get:1 http://piatti.debian.org squeeze/main multipath-tools 0.4.8-15.1 [192kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 192kB in 0s (1302kB/s)
Selecting previously deselected package multipath-tools.
(Reading database ... 6184 files and directories currently installed.)
Unpacking multipath-tools (from .../multipath-tools_0.4.8-15.1_amd64.deb) ...
Setting up multipath-tools (0.4.8-15.1) ...
insserv: Service module-init-tools has to be enabled to start service multipath-tools-boot
insserv: exiting now!
update-rc.d: error: insserv rejected the script header
dpkg: error processing multipath-tools (--configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
multipath-tools
E: Sub-process /usr/bin/dpkg returned an error code (1)
0m12.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'umount', '/proc']
0m12.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'umount', '/proc']
0m13.2s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpfwMXTl
End: 2010-02-25 18:50:03 UTC
signature.asc
Description: This is a digitally signed message part.
--- End Message ---
--- Begin Message ---
Version: multipath-tools/0.4.8+git0.761c66f-7
On Fri, Feb 26, 2010 at 09:43:01AM +0100, Holger Levsen wrote:
> Package: multipath-tools
> Version: 0.4.8-15.1
> Severity: serious
> User: debian...@lists.debian.org
> Usertags: piuparts piuparts.d.o
> User: initscripts-ng-de...@lists.alioth.debian.org
> Usertags: incorrect-dependency
>
> Hi,
>
> during a test with piuparts I noticed your package failed to install due to
> incorrect dependencies in the init.d LSB header. Some debian notes are
> available from at http://wiki.debian.org/LSBInitScripts
>
> From the attached log (scroll to the bottom...):
>
> Setting up multipath-tools (0.4.8-15.1) ...
> insserv: Service module-init-tools has to be enabled to start service
> multipath-tools-boot
> insserv: exiting now!
> update-rc.d: error: insserv rejected the script header
> dpkg: error processing multipath-tools (--configure):
> subprocess installed post-installation script returned error exit status 1
> Errors were encountered while processing:
> multipath-tools
> E: Sub-process /usr/bin/dpkg returned an error code (1)
>
>
> regards,
> Holger
> Start: 2010-02-25 18:49:49 UTC
>
> Package: multipath-tools
> Priority: extra
> Section: admin
> Installed-Size: 636
> Maintainer: Debian LVM Team <pkg-lvm-maintain...@lists.alioth.debian.org>
> Architecture: amd64
> Version: 0.4.8-15.1
> Depends: libaio1 (>= 0.3.106-8), libc6 (>= 2.3.3), libdevmapper1.02.1 (>=
> 2:1.02.20), libncurses5 (>= 5.6+20071006-3), libreadline5 (>= 5.2), udev (>=
> 0.124), initscripts (>= 2.85-16), kpartx (>= 0.4.8-15.1), lsb-base (>= 3)
> Suggests: multipath-tools-boot
> Conflicts: multipath-tools-initramfs (<= 1.0.1)
> Filename: pool/main/m/multipath-tools/multipath-tools_0.4.8-15.1_amd64.deb
> Size: 192444
> MD5sum: 299db610f53948c267dbabf70c928e45
> SHA1: 824bebc6ec7ff45a05f3efefcf0d1119d3f285b3
> SHA256: 413210f6d9f50533dc59fe3e21ef4b80f02c38a512a9c6a9951b25b9c0d6839b
> Description: maintain multipath block device access
> These tools are in charge of maintaining the disk multipath device maps and
> react to path and map events.
> .
> If you install this package you may have to change the way you address block
> devices. See README.Debian for details.
> Tag: admin::kernel, interface::commandline, role::program, scope::utility,
> uitoolkit::ncurses
>
> Executing: sudo /org/piuparts.debian.org/sbin/piuparts --warn-symlinks
> --warn-on-others --warn-on-leftovers-after-purge --scriptsdir
> /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ad squeeze -b
> squeeze.tar.gz --mirror http://piatti.debian.org/debian/ multipath-tools
> Guessed: debian
> 0m0.0s INFO:
> ------------------------------------------------------------------------------
> 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of
> this logfile.
> 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ
> 0m0.0s INFO:
> ------------------------------------------------------------------------------
> 0m0.0s INFO: piuparts version 0.39~201002251129 starting up.
> 0m0.0s INFO: Command line arguments: /org/piuparts.debian.org/sbin/piuparts
> --warn-symlinks --warn-on-others --warn-on-leftovers-after-purge --scriptsdir
> /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ad squeeze -b
> squeeze.tar.gz --mirror http://piatti.debian.org/debian/ multipath-tools
> 0m0.0s INFO: Running on: Linux piatti 2.6.32.9-dsa-amd64 #1 SMP Tue Feb 23
> 18:40:58 CET 2010 x86_64
> 0m0.0s DEBUG: Created temporary directory
> /org/piuparts.debian.org/tmp/tmpfwMXTl
> 0m0.0s DEBUG: Unpacking squeeze.tar.gz into
> /org/piuparts.debian.org/tmp/tmpfwMXTl
> 0m0.0s DEBUG: Starting command: ['tar', '-C',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', '-zxf', 'squeeze.tar.gz']
> 0m3.0s DEBUG: Command ok: ['tar', '-C',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', '-zxf', 'squeeze.tar.gz']
> 0m3.0s DEBUG: Created policy-rc.d and chmodded it.
> 0m3.0s DEBUG: Starting command: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', 'update']
> 0m4.8s DUMP:
> Get:1 http://piatti.debian.org squeeze Release.gpg [835B]
> Get:2 http://piatti.debian.org squeeze Release [89.5kB]
> Ign http://piatti.debian.org squeeze/main Packages/DiffIndex
> Ign http://piatti.debian.org squeeze/contrib Packages/DiffIndex
> Ign http://piatti.debian.org squeeze/non-free Packages/DiffIndex
> Ign http://piatti.debian.org squeeze/main Packages
> Ign http://piatti.debian.org squeeze/contrib Packages
> Ign http://piatti.debian.org squeeze/non-free Packages
> Get:3 http://piatti.debian.org squeeze/main Packages [8111kB]
> Get:4 http://piatti.debian.org squeeze/contrib Packages [59.0kB]
> Get:5 http://piatti.debian.org squeeze/non-free Packages [113kB]
> Fetched 8374kB in 0s (9275kB/s)
> Reading package lists...
> 0m4.8s DEBUG: Command ok: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', 'update']
> 0m4.8s DEBUG: Starting command: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'mount', '-t', 'proc', 'proc',
> '/proc']
> 0m4.8s DEBUG: Command ok: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'mount', '-t', 'proc', 'proc',
> '/proc']
> 0m4.8s DEBUG: Starting command: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', '-yf', 'upgrade']
> 0m9.2s DUMP:
> Reading package lists...
> Building dependency tree...
> The following packages have been kept back:
> libpam-modules
> The following packages will be upgraded:
> apt base-files e2fslibs e2fsprogs libacl1 libcomerr2 libdb4.7
> libpam-runtime
> libpam0g libss2 libusb-0.1-4 perl-base tzdata
> 13 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
> Need to get 5758kB of archives.
> After this operation, 774kB disk space will be freed.
> Get:1 http://piatti.debian.org squeeze/main base-files 5.1 [61.4kB]
> Get:2 http://piatti.debian.org squeeze/main e2fslibs 1.41.10-1 [143kB]
> Get:3 http://piatti.debian.org squeeze/main e2fsprogs 1.41.10-1 [801kB]
> Get:4 http://piatti.debian.org squeeze/main perl-base 5.10.1-11 [1090kB]
> Get:5 http://piatti.debian.org squeeze/main apt 0.7.25.3 [1750kB]
> Get:6 http://piatti.debian.org squeeze/main libusb-0.1-4 2:0.1.12-14
> [21.7kB]
> Get:7 http://piatti.debian.org squeeze/main libacl1 2.2.49-2 [28.2kB]
> Get:8 http://piatti.debian.org squeeze/main libcomerr2 1.41.10-1 [47.6kB]
> Get:9 http://piatti.debian.org squeeze/main libpam-runtime 1.1.1-1 [219kB]
> Get:10 http://piatti.debian.org squeeze/main libpam0g 1.1.1-1 [118kB]
> Get:11 http://piatti.debian.org squeeze/main libss2 1.41.10-1 [53.3kB]
> Get:12 http://piatti.debian.org squeeze/main tzdata 2010b-1 [763kB]
> Get:13 http://piatti.debian.org squeeze/main libdb4.7 4.7.25-9 [662kB]
> debconf: delaying package configuration, since apt-utils is not installed
> Fetched 5758kB in 0s (45.7MB/s)
> (Reading database ... 5972 files and directories currently installed.)
> Preparing to replace base-files 5.0.0 (using .../base-files_5.1_amd64.deb)
> ...
> Unpacking replacement base-files ...
> Setting up base-files (5.1) ...
> (Reading database ... 5972 files and directories currently installed.)
> Preparing to replace e2fslibs 1.41.9-1 (using
> .../e2fslibs_1.41.10-1_amd64.deb) ...
> Unpacking replacement e2fslibs ...
> Setting up e2fslibs (1.41.10-1) ...
> (Reading database ... 5972 files and directories currently installed.)
> Preparing to replace e2fsprogs 1.41.9-1 (using
> .../e2fsprogs_1.41.10-1_amd64.deb) ...
> Unpacking replacement e2fsprogs ...
> Setting up e2fsprogs (1.41.10-1) ...
> Installing new version of config file /etc/mke2fs.conf ...
> (Reading database ... 5972 files and directories currently installed.)
> Preparing to replace perl-base 5.10.1-9 (using
> .../perl-base_5.10.1-11_amd64.deb) ...
> Unpacking replacement perl-base ...
> Setting up perl-base (5.10.1-11) ...
> (Reading database ... 5972 files and directories currently installed.)
> Preparing to replace apt 0.7.25 (using .../apt_0.7.25.3_amd64.deb) ...
> Unpacking replacement apt ...
> Setting up apt (0.7.25.3) ...
> gpg: key 6070D3A1: "Debian Archive Automatic Signing Key (4.0/etch)
> <ftpmas...@debian.org>" not changed
> gpg: key ADB11277: "Etch Stable Release Key
> <debian-rele...@lists.debian.org>" not changed
> gpg: key BBE55AB3: "Debian-Volatile Archive Automatic Signing Key
> (4.0/etch)" not changed
> gpg: key F42584E6: "Lenny Stable Release Key
> <debian-rele...@lists.debian.org>" not changed
> gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny)
> <ftpmas...@debian.org>" not changed
> gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key
> (5.0/lenny)" not changed
> gpg: Total number processed: 6
> gpg: unchanged: 6
> (Reading database ... 5974 files and directories currently installed.)
> Preparing to replace libusb-0.1-4 2:0.1.12-13 (using
> .../libusb-0.1-4_2%3a0.1.12-14_amd64.deb) ...
> Unpacking replacement libusb-0.1-4 ...
> Setting up libusb-0.1-4 (2:0.1.12-14) ...
> (Reading database ... 5974 files and directories currently installed.)
> Preparing to replace libacl1 2.2.49-1 (using
> .../libacl1_2.2.49-2_amd64.deb) ...
> Unpacking replacement libacl1 ...
> Setting up libacl1 (2.2.49-2) ...
> (Reading database ... 5975 files and directories currently installed.)
> Preparing to replace libcomerr2 1.41.9-1 (using
> .../libcomerr2_1.41.10-1_amd64.deb) ...
> Unpacking replacement libcomerr2 ...
> Setting up libcomerr2 (1.41.10-1) ...
> (Reading database ... 5975 files and directories currently installed.)
> Preparing to replace libpam-runtime 1.1.0-4 (using
> .../libpam-runtime_1.1.1-1_all.deb) ...
> Unpacking replacement libpam-runtime ...
> Setting up libpam-runtime (1.1.1-1) ...
> (Reading database ... 5975 files and directories currently installed.)
> Preparing to replace libpam0g 1.1.0-4 (using
> .../libpam0g_1.1.1-1_amd64.deb) ...
> Unpacking replacement libpam0g ...
> Setting up libpam0g (1.1.1-1) ...
> (Reading database ... 5975 files and directories currently installed.)
> Preparing to replace libss2 1.41.9-1 (using .../libss2_1.41.10-1_amd64.deb)
> ...
> Unpacking replacement libss2 ...
> Setting up libss2 (1.41.10-1) ...
> (Reading database ... 5975 files and directories currently installed.)
> Preparing to replace tzdata 2010a-1 (using .../tzdata_2010b-1_all.deb) ...
> Unpacking replacement tzdata ...
> Setting up tzdata (2010b-1) ...
>
> Current default time zone: 'Etc/UTC'
> Local time is now: Thu Feb 25 18:49:58 UTC 2010.
> Universal Time is now: Thu Feb 25 18:49:58 UTC 2010.
> Run 'dpkg-reconfigure tzdata' if you wish to change it.
>
> (Reading database ... 5984 files and directories currently installed.)
> Preparing to replace libdb4.7 4.7.25-8 (using
> .../libdb4.7_4.7.25-9_amd64.deb) ...
> Unpacking replacement libdb4.7 ...
> Setting up libdb4.7 (4.7.25-9) ...
> 0m9.2s DEBUG: Command ok: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', '-yf', 'upgrade']
> 0m9.2s DEBUG: Starting command: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', 'clean']
> 0m9.2s DEBUG: Command ok: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', 'clean']
> 0m9.2s DEBUG: Copying scriptsdir to
> /org/piuparts.debian.org/tmp/tmpfwMXTl/tmp/scripts/
> 0m9.2s INFO: Running scripts post_setup
> 0m9.9s DEBUG: Starting command: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'dpkg', '--get-selections', '*']
> 0m9.9s DUMP:
> apt install
> base-files install
> base-passwd install
> bash install
> bsdutils install
> coreutils install
> dash install
> debconf install
> debconf-i18n install
> debian-archive-keyring install
> debianutils install
> diffutils install
> dpkg install
> e2fslibs install
> e2fsprogs install
> findutils install
> gcc-4.4-base install
> gnupg install
> gpgv install
> grep install
> gzip install
> hostname install
> initscripts install
> insserv install
> libacl1 install
> libattr1 install
> libblkid1 install
> libbz2-1.0 install
> libc-bin install
> libc6 install
> libcomerr2 install
> libdb4.7 install
> libgcc1 install
> liblocale-gettext-perl install
> libncurses5 install
> libpam-modules install
> libpam-runtime install
> libpam0g install
> libreadline6 install
> libselinux1 install
> libsepol1 install
> libss2 install
> libstdc++6 install
> libtext-charwidth-perl install
> libtext-iconv-perl install
> libtext-wrapi18n-perl install
> libunwind7 install
> libusb-0.1-4 install
> libuuid1 install
> login install
> lsb-base install
> lzma install
> mawk install
> mount install
> ncurses-base install
> ncurses-bin install
> passwd install
> perl-base install
> readline-common install
> sed install
> sensible-utils install
> sysv-rc install
> sysvinit install
> sysvinit-utils install
> tar install
> tzdata install
> util-linux install
> zlib1g install
> 0m9.9s DEBUG: Command ok: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'dpkg', '--get-selections', '*']
> 0m9.9s DEBUG: Starting command: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-cache', 'show',
> 'multipath-tools']
> 0m10.0s DUMP:
> Package: multipath-tools
> Priority: extra
> Section: admin
> Installed-Size: 636
> Maintainer: Debian LVM Team <pkg-lvm-maintain...@lists.alioth.debian.org>
> Architecture: amd64
> Version: 0.4.8-15.1
> Depends: libaio1 (>= 0.3.106-8), libc6 (>= 2.3.3), libdevmapper1.02.1 (>=
> 2:1.02.20), libncurses5 (>= 5.6+20071006-3), libreadline5 (>= 5.2), udev (>=
> 0.124), initscripts (>= 2.85-16), kpartx (>= 0.4.8-15.1), lsb-base (>= 3)
> Suggests: multipath-tools-boot
> Conflicts: multipath-tools-initramfs (<= 1.0.1)
> Filename: pool/main/m/multipath-tools/multipath-tools_0.4.8-15.1_amd64.deb
> Size: 192444
> MD5sum: 299db610f53948c267dbabf70c928e45
> SHA1: 824bebc6ec7ff45a05f3efefcf0d1119d3f285b3
> SHA256: 413210f6d9f50533dc59fe3e21ef4b80f02c38a512a9c6a9951b25b9c0d6839b
> Description: maintain multipath block device access
> These tools are in charge of maintaining the disk multipath device maps and
> react to path and map events.
> .
> If you install this package you may have to change the way you address
> block
> devices. See README.Debian for details.
> Tag: admin::kernel, interface::commandline, role::program, scope::utility,
> uitoolkit::ncurses
> 0m10.0s DEBUG: Command ok: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-cache', 'show',
> 'multipath-tools']
> 0m10.0s DEBUG: Starting command: ['dpkg-deb', '-b',
> '/org/piuparts.debian.org/tmp/tmpHk4jKT/piuparts-depends-dummy']
> 0m10.1s DUMP:
> dpkg-deb: building package `piuparts-depends-dummy' in
> `/org/piuparts.debian.org/tmp/tmpHk4jKT/piuparts-depends-dummy.deb'.
> 0m10.1s DEBUG: Command ok: ['dpkg-deb', '-b',
> '/org/piuparts.debian.org/tmp/tmpHk4jKT/piuparts-depends-dummy']
> 0m10.1s DEBUG: Copying
> /org/piuparts.debian.org/tmp/tmpHk4jKT/piuparts-depends-dummy.deb to
> /org/piuparts.debian.org/tmp/tmpfwMXTl/tmp
> 0m10.1s INFO: Running scripts pre_install
> 0m10.1s DEBUG: Starting command: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'dpkg', '-i',
> 'tmp/piuparts-depends-dummy.deb']
> 0m10.1s DUMP:
> Selecting previously deselected package piuparts-depends-dummy.
> (Reading database ... 5984 files and directories currently installed.)
> Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ...
> dpkg: dependency problems prevent configuration of piuparts-depends-dummy:
> piuparts-depends-dummy depends on libaio1 (>= 0.3.106-8); however:
> Package libaio1 is not installed.
> piuparts-depends-dummy depends on libdevmapper1.02.1 (>= 2:1.02.20);
> however:
> Package libdevmapper1.02.1 is not installed.
> piuparts-depends-dummy depends on libreadline5 (>= 5.2); however:
> Package libreadline5 is not installed.
> piuparts-depends-dummy depends on udev (>= 0.124); however:
> Package udev is not installed.
> piuparts-depends-dummy depends on kpartx (>= 0.4.8-15.1); however:
> Package kpartx is not installed.
> dpkg: error processing piuparts-depends-dummy (--install):
> dependency problems - leaving unconfigured
> Errors were encountered while processing:
> piuparts-depends-dummy
> 0m10.1s DEBUG: Command failed (status=1), but ignoring error: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'dpkg', '-i',
> 'tmp/piuparts-depends-dummy.deb']
> 0m10.1s DEBUG: Starting command: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', '-yf', '--no-remove',
> 'install']
> 0m11.2s DUMP:
> Reading package lists...
> Building dependency tree...
> Reading state information...
> Correcting dependencies... Done
> The following extra packages will be installed:
> dmsetup kpartx libaio1 libdevmapper1.02.1 libreadline5 libudev0 udev
> Recommended packages:
> usbutils pciutils
> The following NEW packages will be installed:
> dmsetup kpartx libaio1 libdevmapper1.02.1 libreadline5 libudev0 udev
> 0 upgraded, 7 newly installed, 0 to remove and 1 not upgraded.
> 1 not fully installed or removed.
> Need to get 846kB of archives.
> After this operation, 2621kB of additional disk space will be used.
> Get:1 http://piatti.debian.org squeeze/main libaio1 0.3.107-7 [7928B]
> Get:2 http://piatti.debian.org squeeze/main libdevmapper1.02.1 2:1.02.39-1
> [76.1kB]
> Get:3 http://piatti.debian.org squeeze/main libreadline5 5.2-7 [146kB]
> Get:4 http://piatti.debian.org squeeze/main libudev0 151-2 [106kB]
> Get:5 http://piatti.debian.org squeeze/main udev 151-2 [434kB]
> Get:6 http://piatti.debian.org squeeze/main dmsetup 2:1.02.39-1 [50.4kB]
> Get:7 http://piatti.debian.org squeeze/main kpartx 0.4.8-15.1 [25.9kB]
> debconf: delaying package configuration, since apt-utils is not installed
> Fetched 846kB in 0s (30.5MB/s)
> Selecting previously deselected package libaio1.
> (Reading database ... 5984 files and directories currently installed.)
> Unpacking libaio1 (from .../libaio1_0.3.107-7_amd64.deb) ...
> Selecting previously deselected package libdevmapper1.02.1.
> Unpacking libdevmapper1.02.1 (from
> .../libdevmapper1.02.1_2%3a1.02.39-1_amd64.deb) ...
> Selecting previously deselected package libreadline5.
> Unpacking libreadline5 (from .../libreadline5_5.2-7_amd64.deb) ...
> Selecting previously deselected package libudev0.
> Unpacking libudev0 (from .../libudev0_151-2_amd64.deb) ...
> Selecting previously deselected package udev.
> Unpacking udev (from .../archives/udev_151-2_amd64.deb) ...
> Selecting previously deselected package dmsetup.
> Unpacking dmsetup (from .../dmsetup_2%3a1.02.39-1_amd64.deb) ...
> Selecting previously deselected package kpartx.
> Unpacking kpartx (from .../kpartx_0.4.8-15.1_amd64.deb) ...
> Setting up libaio1 (0.3.107-7) ...
> Setting up libdevmapper1.02.1 (2:1.02.39-1) ...
> Setting up libreadline5 (5.2-7) ...
> Setting up libudev0 (151-2) ...
> Setting up udev (151-2) ...
> A chroot environment has been detected, udev not started.
> Setting up dmsetup (2:1.02.39-1) ...
> Setting up kpartx (0.4.8-15.1) ...
> Setting up piuparts-depends-dummy (0.invalid.0) ...
> 0m11.2s DEBUG: Command ok: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', '-yf', '--no-remove',
> 'install']
> 0m11.2s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok
> 0m11.2s INFO: Running scripts post_install
> 0m11.2s DEBUG: Starting command: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', 'clean']
> 0m11.2s DEBUG: Command ok: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', 'clean']
> 0m11.2s DEBUG: Removing
> /org/piuparts.debian.org/tmp/tmpfwMXTl/tmp/piuparts-depends-dummy.deb
> 0m11.2s DEBUG: Starting command: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'dpkg', '--purge',
> 'piuparts-depends-dummy']
> 0m11.2s DUMP:
> (Reading database ... 6184 files and directories currently installed.)
> Removing piuparts-depends-dummy ...
> 0m11.2s DEBUG: Command ok: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'dpkg', '--purge',
> 'piuparts-depends-dummy']
> 0m11.2s DEBUG: Starting command: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'dpkg', '--remove', '--pending']
> 0m11.3s DEBUG: Command ok: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'dpkg', '--remove', '--pending']
> 0m12.0s DEBUG: Starting command: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', '-y', 'install',
> 'multipath-tools']
> 0m12.8s DUMP:
> Reading package lists...
> Building dependency tree...
> Reading state information...
> Suggested packages:
> multipath-tools-boot
> The following NEW packages will be installed:
> multipath-tools
> 0 upgraded, 1 newly installed, 0 to remove and 1 not upgraded.
> Need to get 192kB of archives.
> After this operation, 651kB of additional disk space will be used.
> Get:1 http://piatti.debian.org squeeze/main multipath-tools 0.4.8-15.1
> [192kB]
> debconf: delaying package configuration, since apt-utils is not installed
> Fetched 192kB in 0s (1302kB/s)
> Selecting previously deselected package multipath-tools.
> (Reading database ... 6184 files and directories currently installed.)
> Unpacking multipath-tools (from .../multipath-tools_0.4.8-15.1_amd64.deb)
> ...
> Setting up multipath-tools (0.4.8-15.1) ...
> insserv: Service module-init-tools has to be enabled to start service
> multipath-tools-boot
> insserv: exiting now!
> update-rc.d: error: insserv rejected the script header
> dpkg: error processing multipath-tools (--configure):
> subprocess installed post-installation script returned error exit status 1
> Errors were encountered while processing:
> multipath-tools
> E: Sub-process /usr/bin/dpkg returned an error code (1)
> 0m12.8s ERROR: Command failed (status=100): ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'apt-get', '-y', 'install',
> 'multipath-tools']
> Reading package lists...
> Building dependency tree...
> Reading state information...
> Suggested packages:
> multipath-tools-boot
> The following NEW packages will be installed:
> multipath-tools
> 0 upgraded, 1 newly installed, 0 to remove and 1 not upgraded.
> Need to get 192kB of archives.
> After this operation, 651kB of additional disk space will be used.
> Get:1 http://piatti.debian.org squeeze/main multipath-tools 0.4.8-15.1
> [192kB]
> debconf: delaying package configuration, since apt-utils is not installed
> Fetched 192kB in 0s (1302kB/s)
> Selecting previously deselected package multipath-tools.
> (Reading database ... 6184 files and directories currently installed.)
> Unpacking multipath-tools (from .../multipath-tools_0.4.8-15.1_amd64.deb)
> ...
> Setting up multipath-tools (0.4.8-15.1) ...
> insserv: Service module-init-tools has to be enabled to start service
> multipath-tools-boot
> insserv: exiting now!
> update-rc.d: error: insserv rejected the script header
> dpkg: error processing multipath-tools (--configure):
> subprocess installed post-installation script returned error exit status 1
> Errors were encountered while processing:
> multipath-tools
> E: Sub-process /usr/bin/dpkg returned an error code (1)
>
> 0m12.8s DEBUG: Starting command: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'umount', '/proc']
> 0m12.8s DEBUG: Command ok: ['chroot',
> '/org/piuparts.debian.org/tmp/tmpfwMXTl', 'umount', '/proc']
> 0m13.2s DEBUG: Removed directory tree at
> /org/piuparts.debian.org/tmp/tmpfwMXTl
>
> End: 2010-02-25 18:50:03 UTC
--- End Message ---
