Package: hplip
Version: 3.9.4b-1
Severity: grave
Justification: renders package unusable
After upgrading to the new hplip, I'm no longer able to launch hp-devicesetup.
I get the following messages:
warning: Qt/PyQt 4 initialization failed.
error: hp-devicesetup -u/--gui requires Qt4 GUI support. Exiting.
Also there is something else going wrong, as you can witness below in the
package-specific info collection. For instance, CUPS is indeed installed.
-- Package-specific info:
error: NOT FOUND OR FAILED TO LOAD!
error: Version: (Not available. CUPS may not be installed or not running.)
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP
functionality may not function properly.
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP
functionality may not function properly.
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure
that this dependency is installed before installing or running HPLIP.
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP
functionality may not function properly.
HP Linux Imaging and Printing System (ver. 3.9.4b)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling
the HPLIP
supplied tarball (.tar.gz or .run) to determine if the proper dependencies are
installed
to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied
package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the
proper
dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check
both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux nice 2.6.30.6 #1 SMP Wed Sep 9 17:55:52 CEST 2009 i686 GNU/Linux
Distribution:
debian 0.0
HPOJ running?
No, HPOJ is not running (OK).
Checking Python version...
OK, version 2.5.2 installed
Checking PyQt 4.x version...
Checking for CUPS...
Status: scheduler is running
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.82.4
------------------------
| RUNTIME DEPENDENCIES |
------------------------
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS DDK - CUPS driver development kit...
Checking for dependency: GhostScript - PostScript and PDF language interpreter
and previewer...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline
scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
Checking for dependency: ppdev - Parallel port support kernel module....
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
Checking for dependency: Python ctypes - A foreign function library for
Python...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax
functionality...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
----------------------
| HPLIP INSTALLATION |
----------------------
Currently installed HPLIP version...
HPLIP 3.9.4b currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.9.4b
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hpijs/HP
ppdbase=/usr/share/ppd/hpijs
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
cups-ppd-install=no
cups-drv-install=yes
internal-tag=3.9.4b.10
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = hpaio:/usb/Officejet_J6400_serieerror: Unable to communicate with
device (code=12): hp:/usb/Officejet_J6400_series?serial=MY87M4B3D0056D
error: Device not found
error: Communication status: Failed
error: Unable to communicate with device (code=12):
hpfax:/usb/Officejet_J6400_series?serial=MY87M4B3D0056D
error: Device not found
error: Communication status: Failed
warning: Device URI: (Makeuri FAILED)
error: 8 errors and/or warnings.
s?serial=MY87M4B3D0056D
[installation]
version = 3.9.4b.10
date_time = 10/02/09 14:02:44
-------------------------------
| DISCOVERED PARALLEL DEVICES |
-------------------------------
No devices found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Officejet_J6400
---------------
Type: Printer
Device URI: hp:/usb/Officejet_J6400_series?serial=MY87M4B3D0056D
PPD: /etc/cups/ppd/Officejet_J6400.ppd
PPD Description: HP Officejet j6400 series Foomatic/hpijs, hpijs 2.8.6b
Printer status: printer Officejet_J6400 is idle. enabled since Fri Oct 2
13:54:16 2009
ready to print
Officejet_J6400_fax
-------------------
Type: Fax
Device URI: hpfax:/usb/Officejet_J6400_series?serial=MY87M4B3D0056D
PPD: /etc/cups/ppd/Officejet_J6400_fax.ppd
PPD Description: HP Fax
Printer status: printer Officejet_J6400_fax is idle. enabled since Wed Oct 22
13:50:07 2008
----------------------
| SANE CONFIGURATION |
----------------------
'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
---------------------
| PYTHON EXTENSIONS |
---------------------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
HP Device 0x3312 at 005:003:
Device node: /dev/bus/usb/005/003
Mode: 0664
---------------
| USER GROUPS |
---------------
ram root adm lp dialout cdrom floppy tape audio dip backup video users
-----------
| SUMMARY |
-----------
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
Done.
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.30.6 (SMP w/2 CPU cores)
Locale: LANG=fr_FR, LC_CTYPE=fr_FR (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages hplip depends on:
ii adduser 3.110 add and remove users and groups
ii coreutils 6.10-6 The GNU core utilities
ii cups 1.4.1-4 Common UNIX Printing System(tm) -
ii hplip-data 3.9.4b-1 HP Linux Printing and Imaging - da
ii libc6 2.9-4 GNU C Library: Shared libraries
ii libcups2 1.4.1-2 Common UNIX Printing System(tm) -
ii libdbus-1-3 1.1.1-3 simple interprocess messaging syst
ii libsane 1.0.19-21 API library for scanners
ii libsnmp15 5.4.1~dfsg-10 SNMP (Simple Network Management Pr
ii libssl0.9.8 0.9.8g-13 SSL shared libraries
ii libusb-0.1-4 2:0.1.12-7 userspace USB programming library
ii lsb-base 3.2-23 Linux Standard Base 3.2 init scrip
ii policykit 0.9-4 framework for managing administrat
ii python 2.5.2-1 An interactive high-level object-o
ii python-dbus 0.82.4-2 simple interprocess messaging syst
di python-imaging 1.1.6-3 Python Imaging Library
Versions of packages hplip recommends:
ii cups-client 1.4.1-4 Common UNIX Printing System(tm) -
ii hpijs 3.9.4b-1 HP Linux Printing and Imaging - gs
ii sane-utils 1.0.20-8 API library for scanners -- utilit
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
