--- Begin Message ---
Package: xserver-xorg-core
Version: 2:1.6.4-1
Severity: normal
After upgrading, X server just dies on startup, with SEGV (11).
I tried removing my /etc/X11/xorg.conf out of the way, to no avail.
Box is a Mac Mini intel.
Thx.
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 Oct 26 2008 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1867968 Sep 28 08:30 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS,
943/940GML Express Integrated Graphics Controller (rev 03)
/var/lib/x11/xorg.conf.md5sum does not exist.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 1213 Sep 19 19:59 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "unix/:7100"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "hhk"
Option "XkbLayout" "us,us"
Option "XkbVariant" "altgr-intl,dvorak"
Option "XkbOptions" "grp:shifts_toggle"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 18869 Sep 28 12:51 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30.8-dsa-amd64 x86_64 Debian
Current Operating System: Linux worf 2.6.30-2-amd64 #1 SMP Fri Sep 25 22:16:56
UTC 2009 x86_64
Build Date: 28 September 2009 06:29:58AM
xorg-server 2:1.6.4-1 (bui...@brahms.debian.org)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 28 12:51:25 2009
(II) Loader magic: 0x3540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:0:2:0) 8086:27a2:8086:7270 Intel Corporation Mobile 945GM/GMS,
943/940GML Express Integrated Graphics Controller rev 3, Mem @
0x90280000/524288, 0x80000000/268435456, 0x90300000/262144, I/O @ 0x000020f0/8
(==) Using default built-in configuration (39 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default intel Device 0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Builtin Default intel Screen 0"
Device "Builtin Default intel Device 0"
EndSection
Section "Device"
Identifier "Builtin Default i810 Device 0"
Driver "i810"
EndSection
Section "Screen"
Identifier "Builtin Default i810 Screen 0"
Device "Builtin Default i810 Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default intel Screen 0"
Screen "Builtin Default i810 Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default i810 Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default i810 Device 0"
(==) No monitor specified for screen "Builtin Default i810 Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (3)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable
AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 2.8.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "i810"
(WW) Warning, couldn't open module i810
(II) UnloadModule: "i810"
(EE) Failed to load module "i810" (module does not exist, 0)
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
IGDNG_M
(II) Primary Device is: PCI 0...@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0x80000000
(--) intel(0): IO registers at addr 0x90280000 size 524288
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): the SDVO device with slave addr 70 is found on DVO 1 port
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at
address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): Suspected Mac Mini, ignoring the LVDS
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" removed.
(II) intel(0): I2C bus "LVDSDDC_C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered
at address 0x70.
(II) intel(0): I2C bus "SDVOB DDC Bus" initialized.
(II) intel(0): Output TMDS-1 has no monitor section
(II) intel(0): SDVOB: device VID/DID: 04:AA.03, clock range 25.0MHz - 165.0MHz
(II) intel(0): SDVOB: 1 input channel
(II) intel(0): SDVOB: TMDS0 output reported
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered
at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Current clock rate multiplier: 1
(II) intel(0): EDID for output VGA
(II) intel(0): I2C device "SDVOB DDC Bus:E-EDID segment register" registered at
address 0x60.
(II) intel(0): I2C device "SDVOB DDC Bus:ddc2" registered at address 0xA0.
(II) intel(0): EDID for output TMDS-1
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at
address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output TMDS-1
(II) intel(0): Manufacturer: APP Model: 921c Serial#: 33607801
(II) intel(0): Year: 2007 Week: 21
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 49 vert.: 31
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: Off
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): Default color space is primary color space
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.640 redY: 0.343 greenX: 0.292 greenY: 0.618
(II) intel(0): blueX: 0.146 blueY: 0.074 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 1920 vsize 1200 refresh: 60 vid: 209
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 154.0 MHz Image Size: 495 x 310 mm
(II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080
h_border: 0
(II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235
v_border: 0
(II) intel(0): Serial No: 2A7213WJXMN
(II) intel(0): Monitor name: Cinema HD
(II) intel(0): Number of EDID sections to follow: 1
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0006101c9279d00002
(II) intel(0): 1511010380311f782efd45a3574a9e25
(II) intel(0): 135054000000d1000101010101010101
(II) intel(0): 010101010101283c80a070b023403020
(II) intel(0): 3600ef361100001a000000ff00324137
(II) intel(0): 323133574a584d4e0a20000000fc0043
(II) intel(0): 696e656d612048440a20202000000000
(II) intel(0): 0000000000000000000000000000013e
(II) intel(0): 400102000000007e2401a500ffff031a
(II) intel(0): 1aa80100000000004000000000000000
(II) intel(0): 00000000000000000000000000000000
(II) intel(0): 00000000000000000000000000000000
(II) intel(0): 00000000000000000000000000000000
(II) intel(0): 00000000000000000000000000000000
(II) intel(0): 00000000000000000000000000000000
(II) intel(0): 00000000000000000000000000000057
(II) intel(0): EDID vendor "APP", prod id 37404
(II) intel(0): Printing probed modes for output TMDS-1
(II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200
1203 1209 1235 +hsync -vsync (74.0 kHz)
(II) intel(0): EDID for output TV
(II) intel(0): Output VGA disconnected
(II) intel(0): Output TMDS-1 connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output TMDS-1 using initial mode 1920x1200
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 16124 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to
0x00000020
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to
0x00000400
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000203 to
0x80000203
(WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
OREG_UPDATE_STATUS
(WW) intel(0): PIPEASTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS
VBLANK_INT_STATUS OREG_UPDATE_STATUS
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 483584 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1934332 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Current clock rate multiplier: 1
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB,
0x000000007f000000 physical
)
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB,
0x000000007f600000 physical
)
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000007f601000
physical
)
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB,
0x000000007f60b000 physical
)
(II) intel(0): 0x00fbf000: end of stolen memory
(II) intel(0): 0x00fbf000-0x0f9f3fff: DRI memory manager (239828 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x00fbf000: start of memory manager
(II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB) X tiled
(II) intel(0): 0x0f9f4000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output TMDS-1 is connected to pipe A
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
Backtrace:
0: X(xorg_backtrace+0x26) [0x4edfe6]
1: X(xf86SigHandler+0x39) [0x483699]
2: /lib/libc.so.6 [0x7f1aca191db0]
3: X(DGAAvailable+0x39) [0x4823c9]
4: X(xf86DiDGAInit+0x30) [0x4ae200]
5: X(xf86CrtcScreenInit+0x10d) [0x4aafad]
6: /usr/lib/xorg/modules/drivers//intel_drv.so [0x7f1ac899864f]
7: X(AddScreen+0x1c6) [0x432ac6]
8: X(InitOutput+0x241) [0x46d361]
9: X(main+0x200) [0x4331d0]
10: /lib/libc.so.6(__libc_start_main+0xe6) [0x7f1aca17e5c6]
11: X [0x432819]
Fatal server error:
Caught signal 11. Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional
information.
HAL Information (lshal):
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
button.has_state = false (bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'button', 'input.keys'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string)
input.device = '/dev/input/event5' (string)
input.product = 'Power Button' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'hhk' (string)
input.xkb.options = 'lv3:ralt_switch,terminate:ctrl_alt_bksp' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = 'altgr-intl' (string)
linux.device_file = '/dev/input/event5' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5'
(string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Video Bus' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
(string)
input.device = '/dev/input/event1' (string)
input.product = 'Video Bus' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'hhk' (string)
input.xkb.options = 'lv3:ralt_switch,terminate:ctrl_alt_bksp' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = 'altgr-intl' (string)
linux.device_file = '/dev/input/event1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path =
'/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input1/event1'
(string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
button.has_state = false (bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'button', 'input.keys'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
(string)
input.device = '/dev/input/event6' (string)
input.product = 'Power Button' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'hhk' (string)
input.xkb.options = 'lv3:ralt_switch,terminate:ctrl_alt_bksp' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = 'altgr-intl' (string)
linux.device_file = '/dev/input/event6' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path =
'/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6/event6' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
access_control.file = '/dev/input/event0' (string)
access_control.type = 'mouse' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Macintosh mouse button emulation' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
(string)
input.device = '/dev/input/event0' (string)
input.product = 'Macintosh mouse button emulation' (string)
input.x11_driver = 'evdev' (string)
linux.device_file = '/dev/input/event0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/virtual/input/input0/event0' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys',
'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'G15 Extra Keys' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3'
(string)
input.device = '/dev/input/event8' (string)
input.product = 'G15 Extra Keys' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'hhk' (string)
input.xkb.options = 'lv3:ralt_switch,terminate:ctrl_alt_bksp' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = 'altgr-intl' (string)
linux.device_file = '/dev/input/event8' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/virtual/input/input8/event8' (string)
udi =
'/org/freedesktop/Hal/devices/usb_device_46d_a07_noserial_if3_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_a07_noserial_if3'
(string)
info.product = 'Logitech Z-10 USB Speaker' (string)
info.subsystem = 'input' (string)
info.udi =
'/org/freedesktop/Hal/devices/usb_device_46d_a07_noserial_if3_logicaldev_input'
(string)
input.device = '/dev/input/event2' (string)
input.originating_device =
'/org/freedesktop/Hal/devices/usb_device_46d_a07_noserial_if3' (string)
input.product = 'Logitech Z-10 USB Speaker' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'hhk' (string)
input.xkb.options = 'lv3:ralt_switch,terminate:ctrl_alt_bksp' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = 'altgr-intl' (string)
linux.device_file = '/dev/input/event2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.3/input/input2/event2'
(string)
udi =
'/org/freedesktop/Hal/devices/usb_device_46d_c404_noserial_if0_logicaldev_input'
access_control.file = '/dev/input/event4' (string)
access_control.type = 'mouse' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c404_noserial_if0'
(string)
info.product = 'Logitech Trackball' (string)
info.subsystem = 'input' (string)
info.udi =
'/org/freedesktop/Hal/devices/usb_device_46d_c404_noserial_if0_logicaldev_input'
(string)
input.device = '/dev/input/event4' (string)
input.originating_device =
'/org/freedesktop/Hal/devices/usb_device_46d_c404_noserial_if0' (string)
input.product = 'Logitech Trackball' (string)
input.x11_driver = 'evdev' (string)
linux.device_file = '/dev/input/event4' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.3/1-1.3:1.0/input/input4/event4'
(string)
udi =
'/org/freedesktop/Hal/devices/usb_device_853_100_noserial_if0_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys',
'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_853_100_noserial_if0'
(string)
info.product = 'Topre Corporation HHKB Professional' (string)
info.subsystem = 'input' (string)
info.udi =
'/org/freedesktop/Hal/devices/usb_device_853_100_noserial_if0_logicaldev_input'
(string)
input.device = '/dev/input/event3' (string)
input.originating_device =
'/org/freedesktop/Hal/devices/usb_device_853_100_noserial_if0' (string)
input.product = 'Topre Corporation HHKB Professional' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'hhk' (string)
input.xkb.options = 'lv3:ralt_switch,terminate:ctrl_alt_bksp' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = 'altgr-intl' (string)
linux.device_file = '/dev/input/event3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input3/event3'
(string)
DRM Information from dmesg:
[ 0.004000] No AGP bridge found
[ 0.530372] Linux agpgart interface v0.103
[ 0.664987] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 0.666185] agpgart-intel 0000:00:00.0: detected 16124K stolen memory
[ 0.669436] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 22.955299] [drm] Initialized drm 1.1.0 20060810
[ 23.018631] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 25.972803] [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count
for disabled pipe 1
[ 56.492605] [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count
for disabled pipe 1
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-core depends on:
ii libaudit0 1.7.13-1 Dynamic library for security audit
ii libc6 2.9-26 GNU C Library: Shared libraries
ii libdbus-1-3 1.2.16-2 simple interprocess messaging syst
ii libdrm2 2.4.13-1 Userspace interface to kernel DRM
ii libfontenc1 1:1.0.4-3 X11 font encoding library
ii libgcrypt11 1.4.4-4 LGPL Crypto library - runtime libr
ii libhal1 0.5.13-3 Hardware Abstraction Layer - share
ii libpciaccess0 0.10.6-2 Generic PCI access library for X
ii libpixman-1-0 0.14.0-1 pixel-manipulation library for X a
ii libselinux1 2.0.85-4 SELinux runtime shared libraries
ii libxau6 1:1.0.5-1 X11 authorisation library
ii libxdmcp6 1:1.0.2-3 X11 Display Manager Control Protoc
ii libxfont1 1:1.4.0-2 X11 font rasterisation library
ii xserver-common 2:1.6.4-1 common files used by various X ser
ii xserver-xorg 1:7.4+4 the X.Org X server
Versions of packages xserver-xorg-core recommends:
ii libgl1-mesa-dri 7.5.1-1 A free implementation of the OpenG
ii xkb-data 1.6-1 X Keyboard Extension (XKB) configu
Versions of packages xserver-xorg-core suggests:
ii xfonts-100dpi 1:1.0.0-4 100 dpi fonts for X
ii xfonts-75dpi 1:1.0.0-4 75 dpi fonts for X
ii xfonts-base 1:1.0.0-6 standard fonts for X
ii xfonts-scalable 1:1.0.0-7 scalable fonts for X
-- no debconf information
--- End Message ---
