dmesg : [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.30-1-686 (Debian 2.6.30-6) (wa...@debian.org) (gcc version 4.3.4 (Debian 4.3.4-1) ) #1 SMP Sat Aug 15 19:11:58 UTC 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001def0000 (usable) [ 0.000000] BIOS-e820: 000000001def0000 - 000000001defa000 (ACPI data) [ 0.000000] BIOS-e820: 000000001defa000 - 000000001df00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001df00000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x1def0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-DBFFF uncachable [ 0.000000] DC000-E3FFF write-back [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFE0000000 write-back [ 0.000000] 1 base 001E000000 mask FFFE000000 uncachable [ 0.000000] 2 base 00E0000000 mask FFFE000000 write-combining [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] init_memory_mapping: 0000000000000000-000000001def0000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001dc00000 page 2M [ 0.000000] 001dc00000 - 001def0000 page 4k [ 0.000000] kernel direct mapping tables up to 1def0000 @ 7000-c000 [ 0.000000] RAMDISK: 15f80000 - 167730e3 [ 0.000000] ACPI: RSDP 000f7f60 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 1def617c 00034 (v01 PTLTD RSDT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 1def9e1d 00074 (v01 SiS 755F 06040000 PTL 000F4240) [ 0.000000] ACPI: DSDT 1def61b0 03C6D (v01 PTLTD 755 06040000 MSFT 0100000E) [ 0.000000] ACPI: FACS 1defafc0 00040 [ 0.000000] ACPI: SSDT 1def9e91 000F7 (v01 PTLTD POWERNOW 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 1def9f88 00050 (v01 PTLTD APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 1def9fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 478MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1def0000 [ 0.000000] low ram: 0 - 1def0000 [ 0.000000] node 0 low ram: 00000000 - 1def0000 [ 0.000000] node 0 bootmap 00002000 - 00005be0 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001def0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 0000540b10] TEXT DATA BSS ==> [0000100000 - 0000540b10] [ 0.000000] #4 [0015f80000 - 00167730e3] RAMDISK ==> [0015f80000 - 00167730e3] [ 0.000000] #5 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] [ 0.000000] #6 [0000541000 - 0000543190] BRK ==> [0000541000 - 0000543190] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000] [ 0.000000] found SMP MP-table at [c00f7fd0] f7fd0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001def0 [ 0.000000] HighMem 0x0001def0 -> 0x0001def0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001def0 [ 0.000000] On node 0 totalpages: 122511 [ 0.000000] free_area_init_node: node 0, pgdat c040bd40, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 [ 0.000000] Normal zone: 926 pages used for memmap [ 0.000000] Normal zone: 117586 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dff00000) [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 11 pages at c13c2000, static data 22172 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121553 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-1-686 root=UUID=66f9e54f-484b-4b69-bb6e-ce58a1cf46e4 ro quiet [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] NR_IRQS:1280 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2000.350 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.004000] Initializing HighMem for node 0 (00000000:00000000) [ 0.004000] Memory: 473032k/490432k available (2173k kernel code, 16836k reserved, 1151k data, 320k init, 0k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffe16000 - 0xfffff000 (1956 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xde6f0000 - 0xff7fe000 ( 529 MB) [ 0.004000] lowmem : 0xc0000000 - 0xddef0000 ( 478 MB) [ 0.004000] .init : 0xc0446000 - 0xc0496000 ( 320 kB) [ 0.004000] .data : 0xc031f5d5 - 0xc043f2f0 (1151 kB) [ 0.004000] .text : 0xc0100000 - 0xc031f5d5 (2173 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.70 BogoMIPS (lpj=8001400) [ 0.004053] Security Framework initialized [ 0.004060] SELinux: Disabled at boot. [ 0.004075] Mount-cache hash table entries: 512 [ 0.004203] Initializing cgroup subsys ns [ 0.004208] Initializing cgroup subsys cpuacct [ 0.004212] Initializing cgroup subsys devices [ 0.004215] Initializing cgroup subsys freezer [ 0.004218] Initializing cgroup subsys net_cls [ 0.004237] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004240] CPU: L2 Cache: 128K (64 bytes/line) [ 0.004245] Intel machine check architecture supported. [ 0.004248] Intel machine check reporting enabled on CPU#0. [ 0.004260] Checking 'hlt' instruction... OK. [ 0.020277] SMP alternatives: switching to UP code [ 0.023573] Freeing SMP alternatives: 12k freed [ 0.023600] ACPI: Core revision 20090320 [ 0.032197] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.071887] CPU0: Mobile AMD Sempron(tm) Processor 3300+ stepping 02 [ 0.072001] Brought up 1 CPUs [ 0.072001] Total of 1 processors activated (4000.70 BogoMIPS). [ 0.072001] CPU0 attaching NULL sched-domain. [ 0.072001] net_namespace: 1088 bytes [ 0.072001] Booting paravirtualized kernel on bare hardware [ 0.072001] regulator: core version 0.5 [ 0.072001] NET: Registered protocol family 16 [ 0.072001] ACPI: bus type pci registered [ 0.072001] PCI: PCI BIOS revision 2.10 entry at 0xfd776, last bus=1 [ 0.072001] PCI: Using configuration type 1 for base access [ 0.072001] bio: create slab <bio-0> at 0 [ 0.072001] ACPI: EC: Look up EC in DSDT [ 0.073100] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.104058] ACPI: Interpreter enabled [ 0.104065] ACPI: (supports S0 S3 S4 S5) [ 0.104083] ACPI: Using IOAPIC for interrupt routing [ 0.106691] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 [ 0.106695] ACPI: EC: driver started in interrupt mode [ 0.106877] ACPI: No dock devices found. [ 0.106893] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.106973] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe1ffffff] [ 0.107068] pci 0000:00:02.0: Enabling SiS 96x SMBus [ 0.107098] pci 0000:00:02.1: reg 20 io port: [0x8100-0x811f] [ 0.107125] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7] [ 0.107130] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7] [ 0.107136] pci 0000:00:02.5: reg 18 io port: [0x170-0x177] [ 0.107141] pci 0000:00:02.5: reg 1c io port: [0x374-0x377] [ 0.107146] pci 0000:00:02.5: reg 20 io port: [0x2000-0x200f] [ 0.107177] pci 0000:00:02.6: reg 10 io port: [0x1000-0x10ff] [ 0.107182] pci 0000:00:02.6: reg 14 io port: [0x1c00-0x1c7f] [ 0.107209] pci 0000:00:02.6: supports D1 D2 [ 0.107211] pci 0000:00:02.6: PME# supported from D3hot D3cold [ 0.107215] pci 0000:00:02.6: PME# disabled [ 0.107239] pci 0000:00:02.7: reg 10 io port: [0x1400-0x14ff] [ 0.107245] pci 0000:00:02.7: reg 14 io port: [0x1c80-0x1cff] [ 0.107271] pci 0000:00:02.7: supports D1 D2 [ 0.107273] pci 0000:00:02.7: PME# supported from D3hot D3cold [ 0.107277] pci 0000:00:02.7: PME# disabled [ 0.107293] pci 0000:00:03.0: reg 10 32bit mmio: [0xe2002000-0xe2002fff] [ 0.107327] pci 0000:00:03.1: reg 10 32bit mmio: [0xe2003000-0xe2003fff] [ 0.107366] pci 0000:00:03.2: reg 10 32bit mmio: [0xe2004000-0xe2004fff] [ 0.107393] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.107396] pci 0000:00:03.2: PME# disabled [ 0.107424] pci 0000:00:04.0: reg 10 io port: [0x1800-0x18ff] [ 0.107429] pci 0000:00:04.0: reg 14 32bit mmio: [0xe2005000-0xe2005fff] [ 0.107446] pci 0000:00:04.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.107458] pci 0000:00:04.0: supports D1 D2 [ 0.107461] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.107464] pci 0000:00:04.0: PME# disabled [ 0.107489] pci 0000:00:06.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.107503] pci 0000:00:06.0: supports D1 D2 [ 0.107505] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.107509] pci 0000:00:06.0: PME# disabled [ 0.107530] pci 0000:00:0b.0: reg 10 32bit mmio: [0xe2000000-0xe2001fff] [ 0.107644] pci 0000:01:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff] [ 0.107648] pci 0000:01:00.0: reg 14 32bit mmio: [0xe2100000-0xe211ffff] [ 0.107652] pci 0000:01:00.0: reg 18 io port: [0xa000-0xa07f] [ 0.107666] pci 0000:01:00.0: supports D1 D2 [ 0.107684] pci 0000:00:01.0: bridge io port: [0xa000-0xafff] [ 0.107688] pci 0000:00:01.0: bridge 32bit mmio: [0xe2100000-0xe21fffff] [ 0.107692] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff] [ 0.107710] pci_bus 0000:00: on NUMA node 0 [ 0.107717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.114597] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11) [ 0.114704] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11) [ 0.114798] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11) [ 0.114889] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11) [ 0.115000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11) [ 0.115097] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11) [ 0.115188] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled. [ 0.115280] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11) [ 0.115594] PCI: Using ACPI for IRQ routing [ 0.115927] pnp: PnP ACPI init [ 0.115940] ACPI: bus type pnp registered [ 0.118244] pnp: PnP ACPI: found 8 devices [ 0.118248] ACPI: ACPI bus type pnp unregistered [ 0.118254] PnPBIOS: Disabled by ACPI PNP [ 0.118273] system 00:04: ioport range 0x8000-0x807f has been reserved [ 0.118276] system 00:04: ioport range 0x8080-0x80ff has been reserved [ 0.118280] system 00:04: ioport range 0x8100-0x811f has been reserved [ 0.118283] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.118287] system 00:04: ioport range 0x3f0-0x3f1 has been reserved [ 0.118293] system 00:04: iomem range 0xfec00000-0xfecfffff could not be reserved [ 0.118296] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.118300] system 00:04: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.118303] system 00:04: iomem range 0xffc00000-0xffc00fff has been reserved [ 0.118307] system 00:04: iomem range 0xffe00000-0xffe00fff has been reserved [ 0.118310] system 00:04: iomem range 0xffe80000-0xffefffff has been reserved [ 0.118314] system 00:04: iomem range 0xfffe0000-0xfffeffff has been reserved [ 0.118317] system 00:04: iomem range 0xffff0000-0xffffffff has been reserved [ 0.153244] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.153249] pci 0000:00:01.0: IO window: 0xa000-0xafff [ 0.153254] pci 0000:00:01.0: MEM window: 0xe2100000-0xe21fffff [ 0.153258] pci 0000:00:01.0: PREFETCH window: 0x000000e8000000-0x000000efffffff [ 0.153264] pci 0000:00:06.0: CardBus bridge, secondary bus 0000:02 [ 0.153267] pci 0000:00:06.0: IO window: 0x002400-0x0024ff [ 0.153270] pci 0000:00:06.0: IO window: 0x002800-0x0028ff [ 0.153274] pci 0000:00:06.0: PREFETCH window: 0x30000000-0x33ffffff [ 0.153278] pci 0000:00:06.0: MEM window: 0x34000000-0x37ffffff [ 0.153295] pci 0000:00:06.0: enabling device (0000 -> 0003) [ 0.153310] pci 0000:00:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.153317] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.153320] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.153323] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 0.153326] pci_bus 0000:01: resource 1 mem: [0xe2100000-0xe21fffff] [ 0.153328] pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xefffffff] [ 0.153332] pci_bus 0000:02: resource 0 io: [0x2400-0x24ff] [ 0.153335] pci_bus 0000:02: resource 1 io: [0x2800-0x28ff] [ 0.153337] pci_bus 0000:02: resource 2 pref mem [0x30000000-0x33ffffff] [ 0.153340] pci_bus 0000:02: resource 3 mem: [0x34000000-0x37ffffff] [ 0.153419] NET: Registered protocol family 2 [ 0.153531] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.153865] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.154015] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.154195] TCP: Hash tables configured (established 16384 bind 16384) [ 0.154198] TCP reno registered [ 0.154356] NET: Registered protocol family 1 [ 0.154436] Trying to unpack rootfs image as initramfs... [ 0.392481] Freeing initrd memory: 8140k freed [ 0.405200] Simple Boot Flag at 0x38 set to 0x1 [ 0.405714] audit: initializing netlink socket (disabled) [ 0.405738] type=2000 audit(1253715146.403:1): initialized [ 0.405928] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.406022] VFS: Disk quotas dquot_6.5.2 [ 0.406059] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.406115] msgmni has been set to 940 [ 0.406290] alg: No test for stdrng (krng) [ 0.406385] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.406389] io scheduler noop registered [ 0.406391] io scheduler anticipatory registered [ 0.406394] io scheduler deadline registered [ 0.406412] io scheduler cfq registered (default) [ 0.835956] pci 0000:01:00.0: Boot video device [ 0.836345] isapnp: Scanning for PnP cards... [ 1.051919] Switched to high resolution mode on CPU 0 [ 1.189558] isapnp: No Plug & Play device found [ 1.192286] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.192728] serial 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.192735] serial 0000:00:02.6: PCI INT C disabled [ 1.194153] brd: module loaded [ 1.194253] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.197854] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.197861] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.198048] mice: PS/2 mouse device common for all mice [ 1.198126] rtc_cmos 00:02: RTC can wake from S4 [ 1.198210] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.198238] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 1.198272] cpuidle: using governor ladder [ 1.198275] cpuidle: using governor menu [ 1.198280] No iBFT detected. [ 1.198700] TCP cubic registered [ 1.198751] NET: Registered protocol family 10 [ 1.199231] lo: Disabled Privacy Extensions [ 1.199567] Mobile IPv6 [ 1.199570] NET: Registered protocol family 17 [ 1.199579] Using IPI No-Shortcut mode [ 1.199814] registered taskstats version 1 [ 1.199961] rtc_cmos 00:02: setting system clock to 2009-09-23 14:12:28 UTC (1253715148) [ 1.200041] Freeing unused kernel memory: 320k freed [ 1.200487] Write protecting the kernel text: 2176k [ 1.200507] Write protecting the kernel read-only data: 784k [ 1.230391] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.331548] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.331560] ACPI: Thermal Zone [THRM] (30 C) [ 1.415000] Linux agpgart interface v0.103 [ 1.417646] agpgart-sis 0000:00:00.0: SiS chipset [1039/0760] [ 1.417998] agpgart-sis 0000:00:00.0: AGP aperture is 4M @ 0xe0000000 [ 1.420680] agpgart-sis 0000:00:00.0: AGP bridge [1039/0760] [ 1.420715] BUG: unable to handle kernel NULL pointer dereference at 00000008 [ 1.420796] IP: [<de74b964>] agp_generic_create_gatt_table+0x53/0x176 [agpgart] [ 1.420861] *pde = 00000000 [ 1.420911] Oops: 0000 [#1] SMP [ 1.420983] last sysfs file: /sys/module/agpgart/initstate [ 1.421011] Modules linked in: amd64_agp(+) sis_agp agpgart thermal fan thermal_sys [ 1.421203] [ 1.421231] Pid: 431, comm: modprobe Not tainted (2.6.30-1-686 #1) Aspire 3000 [ 1.421260] EIP: 0060:[<de74b964>] EFLAGS: 00010246 CPU: 0 [ 1.421294] EIP is at agp_generic_create_gatt_table+0x53/0x176 [agpgart] [ 1.421322] EAX: 00000002 EBX: 000000cc ECX: 00000002 EDX: 00000000 [ 1.421350] ESI: dc2faec0 EDI: 000001de EBP: 00000010 ESP: dc2bbcfc [ 1.421378] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 1.421406] Process modprobe (pid: 431, ti=dc2ba000 task=dc369ba0 task.ti=dc2ba000) [ 1.421434] Stack: [ 1.421459] dc2bbd00 00000000 000000cc 00000100 000001de dc2faec0 de74a226 de729e5c [ 1.421652] 00000000 e0000000 00000000 dd8db800 de729abc e0000000 000000a0 dc2faec0 [ 1.421893] a020c914 dd8bb800 00000001 00000000 dd8db858 00000002 00000000 00000070 [ 1.422161] Call Trace: [ 1.422189] [<de74a226>] ? agp_add_bridge+0x13f/0x32e [agpgart] [ 1.422249] [<de729abc>] ? agp_amd64_probe+0x508/0x550 [amd64_agp] [ 1.422305] [<de717000>] ? agp_amd64_init+0x0/0xac [amd64_agp] [ 1.422360] [<de71708e>] ? agp_amd64_init+0x8e/0xac [amd64_agp] [ 1.422415] [<c0101148>] ? do_one_initcall+0x5f/0x17a [ 1.422472] [<c014458e>] ? each_symbol+0x3b/0x1f3 [ 1.422526] [<c0144ee4>] ? find_symbol_in_section+0x0/0xb1 [ 1.422581] [<c01ff3d4>] ? idr_get_empty_slot+0x145/0x202 [ 1.422637] [<c01ff3d4>] ? idr_get_empty_slot+0x145/0x202 [ 1.422691] [<c01ff565>] ? ida_get_new_above+0xd4/0x178 [ 1.422744] [<c01ff3d4>] ? idr_get_empty_slot+0x145/0x202 [ 1.422798] [<c01ff565>] ? ida_get_new_above+0xd4/0x178 [ 1.422852] [<c01c9430>] ? sysfs_ilookup_test+0x0/0xd [ 1.422907] [<c019b837>] ? ifind+0x22/0x50 [ 1.422961] [<c01c9430>] ? sysfs_ilookup_test+0x0/0xd [ 1.423015] [<c01c99f0>] ? sysfs_addrm_finish+0x13/0x199 [ 1.423068] [<c01c96d4>] ? __sysfs_add_one+0x20/0x69 [ 1.423122] [<c01c975a>] ? sysfs_add_one+0x10/0xad [ 1.423175] [<c0146fa3>] ? load_module+0x1165/0x12e7 [ 1.423229] [<c0179f7d>] ? __do_fault+0x325/0x355 [ 1.423286] [<c015f9ce>] ? marker_update_probe_range+0x16/0x1d4 [ 1.423342] [<c016091a>] ? tracepoint_module_notify+0x21/0x24 [ 1.423396] [<c0139ef6>] ? notifier_call_chain+0x2a/0x47 [ 1.423451] [<c013a14b>] ? __blocking_notifier_call_chain+0x3f/0x49 [ 1.423505] [<c01471ac>] ? sys_init_module+0x87/0x187 [ 1.423559] [<c01030e9>] ? syscall_call+0x7/0xb [ 1.423613] Code: 56 10 0f 84 89 00 00 00 89 c5 45 c1 e5 04 8b 46 04 8b 40 0c 83 f8 01 74 12 72 10 83 f8 02 74 0b 31 ff c7 04 24 00 00 00 00 eb 09 <8b> 7a 08 8b 52 04 89 14 24 89 fa b8 d0 00 00 00 e8 59 40 a2 e1 [ 1.424017] EIP: [<de74b964>] agp_generic_create_gatt_table+0x53/0x176 [agpgart] SS:ESP 0068:dc2bbcfc [ 1.424017] CR2: 0000000000000008 [ 1.425305] ---[ end trace d271a550c1613267 ]--- [ 1.464279] Uniform Multi-Platform E-IDE driver [ 1.498048] sis900.c: v1.08.10 Apr. 2 2006 [ 1.498121] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.502795] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13. [ 1.508643] 0000:00:04.0: Using transceiver found at address 13 as default [ 1.509922] eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 19, 00:16:36:10:e5:87 [ 1.551551] SIS_IDE 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.551623] sis5513 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller [ 1.551656] sis5513 0000:00:02.5: IDE controller (0x1039:0x5513 rev 0x00) [ 1.551705] sis5513 0000:00:02.5: not 100% native mode: will probe irqs later [ 1.551739] ide0: BM-DMA at 0x2000-0x2007 [ 1.551775] ide1: BM-DMA at 0x2008-0x200f [ 1.551807] Probing IDE interface ide0... [ 1.560846] usbcore: registered new interface driver usbfs [ 1.560906] usbcore: registered new interface driver hub [ 1.560990] usbcore: registered new device driver usb [ 1.565902] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.840161] hda: HTS541080G9AT00, ATA DISK drive [ 2.512072] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 2.512353] hda: UDMA/100 mode selected [ 2.512609] Probing IDE interface ide1... [ 3.248155] hdc: Slimtype DVDRW SOSW-833S, ATAPI CD/DVD-ROM drive [ 3.920067] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 3.920206] hdc: UDMA/33 mode selected [ 3.920363] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 3.945542] ide1 at 0x170-0x177,0x376 on irq 15 [ 3.946123] ehci_hcd 0000:00:03.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 3.946178] ehci_hcd 0000:00:03.2: EHCI Host Controller [ 3.946267] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1 [ 3.946337] ehci_hcd 0000:00:03.2: cache line size of 64 is not supported [ 3.946383] ehci_hcd 0000:00:03.2: irq 23, io mem 0xe2004000 [ 3.956012] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00 [ 3.956081] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.956112] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.956145] usb usb1: Product: EHCI Host Controller [ 3.956174] usb usb1: Manufacturer: Linux 2.6.30-1-686 ehci_hcd [ 3.956203] usb usb1: SerialNumber: 0000:00:03.2 [ 3.956321] usb usb1: configuration #1 chosen from 1 choice [ 3.956379] hub 1-0:1.0: USB hub found [ 3.956418] hub 1-0:1.0: 6 ports detected [ 3.960251] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.960339] b43-pci-bridge 0000:00:0b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.020063] ssb: Sonics Silicon Backplane found on PCI device 0000:00:0b.0 [ 4.036684] SCSI subsystem initialized [ 4.037157] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 4.037222] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 4.037305] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 4.037370] ohci_hcd 0000:00:03.0: irq 20, io mem 0xe2002000 [ 4.062642] libata version 3.00 loaded. [ 4.092047] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.092086] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.092119] usb usb2: Product: OHCI Host Controller [ 4.092148] usb usb2: Manufacturer: Linux 2.6.30-1-686 ohci_hcd [ 4.092178] usb usb2: SerialNumber: 0000:00:03.0 [ 4.092313] usb usb2: configuration #1 chosen from 1 choice [ 4.092377] hub 2-0:1.0: USB hub found [ 4.092420] hub 2-0:1.0: 3 ports detected [ 4.092959] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 4.093028] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 4.093109] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 4.093173] ohci_hcd 0000:00:03.1: irq 21, io mem 0xe2003000 [ 4.100725] ide-gd driver 1.18 [ 4.100801] hda: max request size: 512KiB [ 4.109185] ide-cd driver 5.00 [ 4.148045] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.148083] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.148116] usb usb3: Product: OHCI Host Controller [ 4.148145] usb usb3: Manufacturer: Linux 2.6.30-1-686 ohci_hcd [ 4.148174] usb usb3: SerialNumber: 0000:00:03.1 [ 4.148315] usb usb3: configuration #1 chosen from 1 choice [ 4.148373] hub 3-0:1.0: USB hub found [ 4.148414] hub 3-0:1.0: 3 ports detected [ 4.157922] hda: 156301488 sectors (80026 MB) w/7539KiB Cache, CHS=16383/255/63 [ 4.158277] hda: cache flushes supported [ 4.158390] hda: hda1 hda2 hda3 < hda5 hda6 hda7 > [ 4.229573] ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache [ 4.229753] Uniform CD-ROM driver Revision: 3.20 [ 5.150492] PM: Starting manual resume from disk [ 5.290603] kjournald starting. Commit interval 5 seconds [ 5.290652] EXT3-fs: mounted filesystem with ordered data mode. [ 7.410810] udev: starting version 141 [ 7.742945] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 7.742994] ACPI: Power Button [PWRF] [ 7.743106] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 7.747161] ACPI: Lid Switch [LID] [ 7.747318] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 7.747355] ACPI: Power Button [PWRB] [ 7.747443] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 [ 7.747478] ACPI: Sleep Button [SLPB] [ 7.757948] ACPI: AC Adapter [ACAD] (on-line) [ 7.891706] Marking TSC unstable due to TSC halts in idle [ 7.891800] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 7.891963] processor ACPI_CPU:00: registered as cooling_device0 [ 7.894947] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 7.906677] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.964162] ACPI: Battery Slot [BAT1] (battery absent) [ 8.012145] yenta_cardbus 0000:00:06.0: CardBus bridge found [1025:0083] [ 8.012195] yenta_cardbus 0000:00:06.0: Using CSCINT to route CSC interrupts to PCI [ 8.012228] yenta_cardbus 0000:00:06.0: Routing CardBus interrupts to PCI [ 8.012260] yenta_cardbus 0000:00:06.0: TI: mfunc 0x00521d22, devctl 0x64 [ 8.163893] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 8.245049] yenta_cardbus 0000:00:06.0: ISA IRQ mask 0x06f8, PCI irq 19 [ 8.245091] yenta_cardbus 0000:00:06.0: Socket status: 30000007 [ 8.302040] cfg80211: Using static regulatory domain info [ 8.302077] cfg80211: Regulatory domain: US [ 8.302105] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.302139] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 8.302170] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 8.302200] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 8.302231] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 8.302261] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 8.302292] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 8.302335] cfg80211: Calling CRDA for country: US [ 8.494539] ACPI: WMI: Mapper loaded [ 8.501379] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100 [ 8.630421] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 8.632944] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f [ 8.633711] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 8.634334] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 8.635191] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 8.725738] acer-wmi: Acer Laptop ACPI-WMI Extras [ 8.725786] acer-wmi: No or unsupported WMI interface, unable to load [ 8.786630] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000 [ 8.821530] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 9.325434] b43-phy0: Broadcom 4318 WLAN found (core revision 9) [ 9.463814] Intel ICH Modem 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 9.489424] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 9.721259] phy0: Selected rate control algorithm 'minstrel' [ 9.722020] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ] [ 10.316025] intel8x0_measure_ac97_clock: measured 55370 usecs (2663 samples) [ 10.316065] intel8x0: clocking to 48000 [ 11.020711] Adding 979924k swap on /dev/hda6. Priority:-1 extents:1 across:979924k [ 11.211864] EXT3 FS on hda2, internal journal [ 11.555242] loop: module loaded [ 12.406094] fuse init (API version 7.11) [ 12.706785] kjournald starting. Commit interval 5 seconds [ 12.707068] EXT3 FS on hda7, internal journal [ 12.707123] EXT3-fs: mounted filesystem with ordered data mode. [ 14.864750] eth0: Media Link Off [ 14.864924] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.852525] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3300+ processors (1 cpu cores) (version 2.20.00) [ 15.852576] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xa [ 15.852579] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc [ 15.852582] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0xe [ 15.852584] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x13 [ 16.152034] Clocksource tsc unstable (delta = -72032807 ns) [ 24.982305] input: b43-phy0 as /devices/virtual/input/input7 [ 25.034497] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 25.116256] b43 ssb0:0: firmware: requesting b43/pcm5.fw [ 25.194985] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw [ 25.233853] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw [ 25.364028] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 25.400439] Registered led device: b43-phy0::tx [ 25.400458] Registered led device: b43-phy0::rx [ 25.400480] Registered led device: b43-phy0::radio [ 25.400628] b43-phy0: Radio turned on by software [ 25.400786] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 26.224153] wlan0: direct probe to AP 00:18:39:c0:2c:7d try 1 [ 26.424010] wlan0: direct probe to AP 00:18:39:c0:2c:7d try 2 [ 26.624013] wlan0: direct probe to AP 00:18:39:c0:2c:7d try 3 [ 26.824010] wlan0: direct probe to AP 00:18:39:c0:2c:7d timed out [ 52.680274] wlan0: direct probe to AP 00:18:39:c0:2c:7d try 1 [ 52.681125] wlan0: authenticate with AP 00:80:48:3a:26:cd [ 52.683200] wlan0 direct probe responded [ 52.683213] wlan0: authenticate with AP 00:80:48:3a:26:cd [ 52.685000] wlan0: authenticated [ 52.685012] wlan0: associate with AP 00:80:48:3a:26:cd [ 52.687954] wlan0: deauthenticated (Reason: 6) [ 53.684936] wlan0: direct probe to AP 00:80:48:3a:26:cd try 1 [ 53.687305] wlan0 direct probe responded [ 53.687319] wlan0: authenticate with AP 00:80:48:3a:26:cd [ 53.689082] wlan0: authenticated [ 53.689093] wlan0: associate with AP 00:80:48:3a:26:cd [ 53.691474] wlan0: RX AssocResp from 00:80:48:3a:26:cd (capab=0x21 status=0 aid=1) [ 53.691483] wlan0: associated [ 53.692468] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 53.774610] cfg80211: Calling CRDA for country: SE [ 63.700037] wlan0: no IPv6 routers present
-- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
