Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-13
Severity: critical
Justification: breaks the whole system
by copying data from one software raid device into annother a kernel panic
comes up
newstorage
2 harddiscs wdc 750 ayps combined with software raid 1
into software raid lvm pv and into this ext3 filesystems
old storage
2 harddisks samsung 400 software raid1 into it ext3 file system nolvm
copying data from old stroage to new storage failed
i removed 2G memory so that there will be only 4 in the system and mounted the
old filesystem as ext2
and everything works fine.
it is a productive system so i will not test it any more with more than 4 G
memory
-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-13) (wa...@debian.org) (gcc version
4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 17:57:00 UTC
2009
** Command line:
root=/dev/mapper/vgcamelot-lvmRoot ro quiet
** Tainted: P (1)
** Kernel log:
[ 10.062847] raid1: raid set md0 active with 2 out of 2 mirrors
[ 10.062847] md: md2 stopped.
[ 10.127932] md: bind<sdb3>
[ 10.127932] md: bind<sda3>
[ 10.136134] raid1: raid set md2 active with 2 out of 2 mirrors
[ 10.136134] md: md1 stopped.
[ 10.211307] md: bind<sdb2>
[ 10.211502] md: bind<sda2>
[ 10.218256] raid1: raid set md1 active with 2 out of 2 mirrors
[ 10.290730] device-mapper: uevent: version 1.0.3
[ 10.290730] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
dm-de...@redhat.com
[ 10.303601] hda: No disk in drive
[ 10.315661] hdb: No disk in drive
[ 10.447604] PM: Starting manual resume from disk
[ 10.475138] kjournald starting. Commit interval 5 seconds
[ 10.475138] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.683110] udevd version 125 started
[ 12.233076] input: Power Button (FF) as /class/input/input4
[ 12.291446] ACPI: Power Button (FF) [PWRF]
[ 12.291515] input: Power Button (CM) as /class/input/input5
[ 12.360070] ACPI: Power Button (CM) [PWRB]
[ 12.488651] Bluetooth: Core ver 2.11
[ 12.504653] NET: Registered protocol family 31
[ 12.504653] Bluetooth: HCI device and connection manager initialized
[ 12.504653] Bluetooth: HCI socket layer initialized
[ 12.520836] Bluetooth: HCI USB driver ver 2.9
[ 12.520836] usbcore: registered new interface driver hci_usb
[ 12.520836] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 12.520836] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) ->
IRQ 18
[ 12.576835] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 12.576835] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2,
TCOBASE=0x0860)
[ 12.576835] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.586320] input: PC Speaker as /class/input/input6
[ 12.656887] ISDN subsystem Rev:
1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
[ 12.725594] pnp: the driver 'parport_pc' has been registered
[ 12.725594] parport_pc 00:0b: reported by Plug and Play ACPI
[ 12.725594] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 12.740129] HiSax: Linux Driver for passive ISDN cards
[ 12.740129] HiSax: Version 3.5 (module)
[ 12.740129] HiSax: Layer1 Revision 2.46.2.5
[ 12.740129] HiSax: Layer2 Revision 2.30.2.4
[ 12.740129] HiSax: TeiMgr Revision 2.20.2.3
[ 12.740129] HiSax: Layer3 Revision 2.22.2.3
[ 12.740129] HiSax: LinkLayer Revision 2.59.2.4
[ 12.772128] hisax_isac: ISAC-S/ISAC-SX ISDN driver v0.1.0
[ 12.822139] parport_pc 00:0b: driver attached
[ 12.835092] hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP ISDN driver v0.0.1
[ 12.835092] HiSax: Card 1 Protocol EDSS1 Id=fcpcipnp0 (0)
[ 12.835092] HiSax: DSS1 Rev. 2.32.2.3
[ 12.835092] HiSax: 2 channels added
[ 12.835092] HiSax: MAX_WAITING_CALLS added
[ 12.835092] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 23 (level, low) ->
IRQ 23
[ 12.835092] hisax_fcpcipnp: found adapter Fritz!Card PCI v2 at 0000:05:02.0
[ 12.867092] pnp: the driver 'fcpnp' has been registered
[ 13.059988] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) ->
IRQ 22
[ 13.060006] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 14.376790] Adding 9767416k swap on /dev/md2. Priority:-1 extents:1
across:9767416k
[ 14.896661] EXT3 FS on dm-0, internal journal
[ 15.429352] loop: module loaded
[ 15.985703] hda: No disk in drive
[ 16.158397] hdb: No disk in drive
[ 17.842752] kjournald starting. Commit interval 5 seconds
[ 17.886202] EXT3 FS on dm-1, internal journal
[ 17.886202] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.030048] kjournald starting. Commit interval 5 seconds
[ 18.048275] EXT3 FS on dm-3, internal journal
[ 18.048278] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.154804] kjournald starting. Commit interval 5 seconds
[ 18.170057] EXT3 FS on dm-2, internal journal
[ 18.170057] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.582518] atl1 0000:03:00.0: eth0 link is up 100 Mbps full duplex
[ 19.186417] NET: Registered protocol family 10
[ 19.186417] lo: Disabled Privacy Extensions
[ 30.084341] lp0: using parport0 (interrupt-driven).
[ 30.096341] ppdev: user-space parallel port driver
[ 30.252065] eth0: no IPv6 routers present
[ 34.785277] Bluetooth: L2CAP ver 2.9
[ 34.785277] Bluetooth: L2CAP socket layer initialized
[ 34.834395] Bluetooth: RFCOMM socket layer initialized
[ 34.834395] Bluetooth: RFCOMM TTY layer initialized
[ 34.834395] Bluetooth: RFCOMM ver 1.8
[ 37.339020] nvidia: module license 'NVIDIA' taints kernel.
[ 37.594930] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 37.594938] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 37.595050] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.09 Wed
Jun 4 23:40:50 PDT 2008
[ 5131.307415] md: md13 stopped.
[ 5131.315441] md: bind<sdc3>
[ 5131.365295] raid1: raid set md13 active with 1 out of 2 mirrors
[ 5131.394625] EXT2-fs warning (device md13): ext2_fill_super: mounting ext3
filesystem as ext2
[ 5131.394631] EXT2-fs warning: mounting unchecked fs, running e2fsck is
recommended
[10009.189853] isdn_net: call from 618268539 -> 0 9507730 ignored
[10009.189853] isdn_tty: call from 618268539 -> 9507730 ignored
[19230.722185] usb 1-2: USB disconnect, address 2
[19234.254337] usb 1-2: new full speed USB device using uhci_hcd and address 3
[19234.518238] usb 1-2: configuration #1 chosen from 1 choice
[19234.530714] usb 1-2: New USB device found, idVendor=04e6, idProduct=e003
[19234.530719] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[19234.530722] usb 1-2: Product: SPRx32 USB Smart Card Reader
[19234.530724] usb 1-2: Manufacturer: SCM Microsystems Inc.
[19234.530726] usb 1-2: SerialNumber: 60201714
** Loaded modules:
Module Size Used by
binfmt_misc 13580 1
nvidia 8105072 24
rfcomm 38176 6
l2cap 23936 9 rfcomm
ppdev 11656 0
lp 14724 0
acpi_cpufreq 11792 1
cpufreq_userspace 8452 0
cpufreq_conservative 11784 0
cpufreq_ondemand 11792 1
cpufreq_stats 9120 0
freq_table 9344 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
cpufreq_powersave 6400 0
ipv6 288328 26
ext2 66576 2
sbp2 25356 0
loop 19468 0
snd_hda_intel 434904 0
snd_pcm_oss 41760 0
snd_mixer_oss 18816 1 snd_pcm_oss
snd_pcm 81672 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 7428 0
snd_seq_oss 33152 0
snd_seq_midi 11072 0
hisax_fcpcipnp 14080 0
hisax_isac 11936 1 hisax_fcpcipnp
snd_rawmidi 26784 1 snd_seq_midi
hisax 380036 2 hisax_fcpcipnp,hisax_isac
parport_pc 31016 1
snd_seq_midi_event 11904 2 snd_seq_oss,snd_seq_midi
crc_ccitt 6528 1 hisax
parport 41776 3 ppdev,lp,parport_pc
snd_seq 54304 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
isdn 127712 1 hisax
psmouse 42268 0
slhc 10112 1 isdn
serio_raw 9860 0
pcspkr 7040 0
iTCO_wdt 15696 0
snd_timer 25744 2 snd_pcm,snd_seq
snd_seq_device 11668 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
i2c_i801 13596 0
hci_usb 18460 2
i2c_core 27936 2 nvidia,i2c_i801
bluetooth 57124 7 rfcomm,l2cap,hci_usb
snd 63688 9
snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 12064 1 snd
snd_page_alloc 13072 2 snd_hda_intel,snd_pcm
button 11680 0
intel_agp 31728 0
joydev 14848 0
evdev 14208 4
ext3 125072 4
jbd 51240 1 ext3
mbcache 12804 2 ext2,ext3
dm_mirror 20608 0
dm_log 13956 1 dm_mirror
dm_snapshot 19400 0
dm_mod 58864 13 dm_mirror,dm_log,dm_snapshot
raid1 24192 4
md_mod 80164 5 raid1
sg 36448 0
ide_floppy 18560 0
sr_mod 19652 0
cdrom 37928 1 sr_mod
sd_mod 29376 10
ide_pci_generic 9220 0 [permanent]
usbhid 45792 0
hid 41792 1 usbhid
ff_memless 9224 1 usbhid
jmicron 6912 0 [permanent]
ide_core 128284 3 ide_floppy,ide_pci_generic,jmicron
ata_piix 22660 7
floppy 61672 0
ata_generic 10116 0
ahci 33036 0
ohci1394 32564 0
libata 165472 3 ata_piix,ata_generic,ahci
ieee1394 93816 2 sbp2,ohci1394
scsi_mod 160760 5 sbp2,sg,sr_mod,sd_mod,libata
dock 14112 1 libata
atl1 35464 0
mii 9856 1 atl1
ehci_hcd 36108 0
uhci_hcd 25760 0
thermal 22688 0
processor 42304 2 acpi_cpufreq,thermal
fan 9352 0
thermal_sys 17728 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub
[8086:29a0] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ea]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82P965/G965 PCI Express Root Port
[8086:29a1] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: fa700000-fe7fffff
Prefetchable memory behind bridge: 00000000bfe00000-00000000dfdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at dc00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at e000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller [8086:284b] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at febf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Prefetchable memory behind bridge: 00000000dfe00000-00000000dfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 4 [8086:2845] (rev 02) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 5 [8086:2847] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fe800000-fe8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface
Controller [8086:2810] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 4 port
SATA IDE Controller [8086:2820] (rev 02) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ec]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at ec00 [size=8]
Region 1: I/O ports at e880 [size=4]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e480 [size=4]
Region 4: I/O ports at e400 [size=16]
Region 5: I/O ports at e080 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_generic, ata_piix, ide-pci-generic
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller
[8086:283e] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at 88000000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 2 port
SATA IDE Controller [8086:2825] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ec]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at d400 [size=8]
Region 1: I/O ports at d080 [size=4]
Region 2: I/O ports at d000 [size=8]
Region 3: I/O ports at cc00 [size=4]
Region 4: I/O ports at c880 [size=16]
Region 5: I/O ports at c800 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_generic, ata_piix, ide-pci-generic
01:00.0 VGA compatible controller [0300]: nVidia Corporation G72 [GeForce 7300
SE] [10de:01d3] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8247]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at fe7e0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb
02:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:81e4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 5: Memory at fe8fe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at fe8e0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
02:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:81e4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at ac00 [size=8]
Region 1: I/O ports at a880 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at a480 [size=4]
Region 4: I/O ports at a400 [size=16]
Capabilities: <access denied>
Kernel driver in use: JMicron IDE
Kernel modules: ata_generic, jmicron, ide-pci-generic
03:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1 Gigabit
Ethernet Adapter [1969:1048] (rev b0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8226]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 1275
Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at fe9a0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl1
Kernel modules: atl1
05:02.0 Network controller [0280]: AVM Audiovisuelles MKTG & Computer System
GmbH Fritz!PCI v2.0 ISDN [1244:0e00] (rev 01)
Subsystem: AVM Audiovisuelles MKTG & Computer System GmbH Fritz!PCI
v2.0 ISDN [1244:0e00]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 0: Memory at feaffc00 (32-bit, non-prefetchable) [size=32]
Region 1: I/O ports at bc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: fcpci
Kernel modules: hisax_fcpcipnp
05:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE
1394 OHCI Link Layer Controller [1106:3044] (rev 80) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A8V/A8N/P4P800 series motherboard
[1043:808a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at b880 [size=128]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
-- System Information:
Debian Release: 5.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.26-1-amd64 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64:
true
linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64:
---------------------------------
[33414.290580] Call Trace:
Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffffa019b3be>]
:jbd:journal_dirty_data+0x31/0x184
Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffffa01abfbc>]
:ext3:ext3_journal_dirty_data+0xf/0x34
Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffffa01ab45a>]
:ext3:walk_page_buffers+0x64/0x8a
Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffffa01abfe1>]
:ext3:journal_dirty_data_fn+0x0/0xd
Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffffa01ae159>]
:ext3:ext3_ordered_writepage+0xeb/0x16f
Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff8027709b>]
__writepage+0xa/0x23
Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff80277560>]
write_cache_pages+0x182/0x2b1
Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff80277091>]
__writepage+0x0/0x23
Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff80277091>]
__writepage+0x0/0x23
Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff802776d2>]
do_writepages+0x27/0x2d
Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff802b64d4>]
__writeback_single_inode+0x144/0x29d
Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff80278d56>]
pagevec_lookup_tag+0x1a/0x21
Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff80271806>]
wait_on_page_writeback_range+0xc8/0x113
Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff802b6998>]
sync_sb_inodes+0x1b1/0x293
Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff802b6b14>]
sync_inodes_sb+0x9a/0xa6
Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff802b6b79>]
__sync_inodes+0x59/0xa2
Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff802b6bd3>]
sync_inodes+0x11/0x29
Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff802b9426>]
do_sync+0x12/0x5a
Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff802b947c>]
sys_sync+0xe/0x16
Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff8020beca>]
system_call_after_swapgs+0x8a/0x8f
--
To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
