--- Begin Message ---
Package: linux-image-2.6.26-1-686
Version: 2.6.26-4
Severity: critical
Justification: causes serious data loss
Hi !
After latest upgrade, the kernel switched from 2.6.25-2 to 2.6.26-1. At reboot,
2 hard drives connected to the PCI Sil3112 SATA card
was not detected anymore. The module is correctly loaded but the devices are
just not discovered.
If i boot back from the previous 2.6.25-686 kernel entry in grub, the disks are
perfectly detected.
Please find below the previous 2.6.25-2-686 kern.log for debugging purpose and
the automatically generated infos from the 2.6.26-686
kernel.
Feel free to ask any additionnal informations.
Thank you for consedering this issue.
<BEGIN 2.6.25-2-686>
......................
Sep 20 11:01:08 horizon kernel: [ 0.000000] Linux version 2.6.25-2-686
(Debian 2.6.25-7) ([EMAIL PROTECTED]) (gcc version 4.1.3
20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Fri Jul 18 17:46:56 UTC 2008
......................
Sep 20 11:01:08 horizon kernel: [ 1.907713] SCSI subsystem initialized
......................
Sep 20 11:01:08 horizon kernel: [ 4.476004] sata_sil 0000:00:0d.0: version
2.3
Sep 20 11:01:08 horizon kernel: [ 4.476004] ACPI: PCI Interrupt
0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 17
Sep 20 11:01:08 horizon kernel: [ 4.477178] scsi0 : sata_sil
Sep 20 11:01:08 horizon kernel: [ 4.481133] scsi1 : sata_sil
Sep 20 11:01:08 horizon kernel: [ 4.481277] ata1: SATA max UDMA/100 mmio
[EMAIL PROTECTED] tf 0xcfff7480 irq 17
Sep 20 11:01:08 horizon kernel: [ 4.481346] ata2: SATA max UDMA/100 mmio
[EMAIL PROTECTED] tf 0xcfff74c0 irq 17
Sep 20 11:01:08 horizon kernel: [ 4.793549] ata1: SATA link down (SStatus 0
SControl 310)
Sep 20 11:01:08 horizon kernel: [ 4.857395] firewire_core: created device
fw0: GUID 00110600571a382d, S400
Sep 20 11:01:08 horizon kernel: [ 5.259306] ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Sep 20 11:01:08 horizon kernel: [ 5.267122] ata2.00: ATA-7: SAMSUNG HD103UJ,
1AA01112, max UDMA7
Sep 20 11:01:08 horizon kernel: [ 5.267122] ata2.00: 1953525168 sectors,
multi 16: LBA48 NCQ (depth 0/32)
Sep 20 11:01:08 horizon kernel: [ 5.274383] ata2.00: configured for UDMA/100
Sep 20 11:01:08 horizon kernel: [ 5.274383] scsi 1:0:0:0: Direct-Access
ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
Sep 20 11:01:08 horizon kernel: [ 5.274383] ACPI: PCI Interrupt
0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
Sep 20 11:01:08 horizon kernel: [ 5.274383] ohci_hcd 0000:00:03.0: OHCI Host
Controller
Sep 20 11:01:08 horizon kernel: [ 5.274383] ohci_hcd 0000:00:03.0: new USB
bus registered, assigned bus number 2
Sep 20 11:01:08 horizon kernel: [ 5.274383] ohci_hcd 0000:00:03.0: irq 20,
io mem 0xcfff9000
Sep 20 11:01:08 horizon kernel: [ 5.291034] Driver 'sd' needs updating -
please use bus_type methods
Sep 20 11:01:08 horizon kernel: [ 5.292595] sd 1:0:0:0: [sda] 1953525168
512-byte hardware sectors (1000205 MB)
Sep 20 11:01:08 horizon kernel: [ 5.292704] sd 1:0:0:0: [sda] Write Protect
is off
Sep 20 11:01:08 horizon kernel: [ 5.292768] sd 1:0:0:0: [sda] Mode Sense: 00
3a 00 00
Sep 20 11:01:08 horizon kernel: [ 5.292793] sd 1:0:0:0: [sda] Write cache:
enabled, read cache: enabled, doesn't support DPO or
FUA
Sep 20 11:01:08 horizon kernel: [ 5.292972] sd 1:0:0:0: [sda] 1953525168
512-byte hardware sectors (1000205 MB)
Sep 20 11:01:08 horizon kernel: [ 5.293065] sd 1:0:0:0: [sda] Write Protect
is off
Sep 20 11:01:08 horizon kernel: [ 5.293128] sd 1:0:0:0: [sda] Mode Sense: 00
3a 00 00
Sep 20 11:01:08 horizon kernel: [ 5.293150] sd 1:0:0:0: [sda] Write cache:
enabled, read cache: enabled, doesn't support DPO or
FUA
Sep 20 11:01:08 horizon kernel: [ 5.293237] sda: sda1 sda2
Sep 20 11:01:08 horizon kernel: [ 5.307708] sd 1:0:0:0: [sda] Attached SCSI
disk
Sep 20 11:01:08 horizon kernel: [ 5.331709] usb usb2: configuration #1
chosen from 1 choice
Sep 20 11:01:08 horizon kernel: [ 5.331709] hub 2-0:1.0: USB hub found
Sep 20 11:01:08 horizon kernel: [ 5.331709] hub 2-0:1.0: 3 ports detected
Sep 20 11:01:08 horizon kernel: [ 5.433325] usb usb2: New USB device found,
idVendor=1d6b, idProduct=0001
Sep 20 11:01:08 horizon kernel: [ 5.433325] usb usb2: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Sep 20 11:01:08 horizon kernel: [ 5.433325] usb usb2: Product: OHCI Host
Controller
Sep 20 11:01:08 horizon kernel: [ 5.433325] usb usb2: Manufacturer: Linux
2.6.25-2-686 ohci_hcd
Sep 20 11:01:08 horizon kernel: [ 5.433325] usb usb2: SerialNumber:
0000:00:03.0
Sep 20 11:01:08 horizon kernel: [ 5.433325] ACPI: PCI Interrupt
0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
Sep 20 11:01:08 horizon kernel: [ 5.433325] ohci_hcd 0000:00:03.1: OHCI Host
Controller
Sep 20 11:01:08 horizon kernel: [ 5.433325] ohci_hcd 0000:00:03.1: new USB
bus registered, assigned bus number 3
Sep 20 11:01:08 horizon kernel: [ 5.433325] ohci_hcd 0000:00:03.1: irq 21,
io mem 0xcfffa000
Sep 20 11:01:08 horizon kernel: [ 5.492005] usb usb3: configuration #1
chosen from 1 choice
Sep 20 11:01:08 horizon kernel: [ 5.492005] hub 3-0:1.0: USB hub found
Sep 20 11:01:08 horizon kernel: [ 5.492005] hub 3-0:1.0: 3 ports detected
Sep 20 11:01:08 horizon kernel: [ 5.595348] usb usb3: New USB device found,
idVendor=1d6b, idProduct=0001
Sep 20 11:01:08 horizon kernel: [ 5.595348] usb usb3: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Sep 20 11:01:08 horizon kernel: [ 5.595348] usb usb3: Product: OHCI Host
Controller
Sep 20 11:01:08 horizon kernel: [ 5.595348] usb usb3: Manufacturer: Linux
2.6.25-2-686 ohci_hcd
Sep 20 11:01:08 horizon kernel: [ 5.595348] usb usb3: SerialNumber:
0000:00:03.1
Sep 20 11:01:08 horizon kernel: [ 5.595348] ACPI: PCI Interrupt
0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
Sep 20 11:01:08 horizon kernel: [ 5.595348] ohci_hcd 0000:00:03.2: OHCI Host
Controller
Sep 20 11:01:08 horizon kernel: [ 5.595348] ohci_hcd 0000:00:03.2: new USB
bus registered, assigned bus number 4
Sep 20 11:01:08 horizon kernel: [ 5.595348] ohci_hcd 0000:00:03.2: irq 22,
io mem 0xcfffb000
Sep 20 11:01:08 horizon kernel: [ 5.650264] usb usb4: configuration #1
chosen from 1 choice
Sep 20 11:01:08 horizon kernel: [ 5.650264] hub 4-0:1.0: USB hub found
Sep 20 11:01:08 horizon kernel: [ 5.650264] hub 4-0:1.0: 2 ports detected
Sep 20 11:01:08 horizon kernel: [ 5.735624] usb 2-3: new full speed USB
device using ohci_hcd and address 2
Sep 20 11:01:08 horizon kernel: [ 5.751520] usb usb4: New USB device found,
idVendor=1d6b, idProduct=0001
Sep 20 11:01:08 horizon kernel: [ 5.751520] usb usb4: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Sep 20 11:01:08 horizon kernel: [ 5.751520] usb usb4: Product: OHCI Host
Controller
Sep 20 11:01:08 horizon kernel: [ 5.751520] usb usb4: Manufacturer: Linux
2.6.25-2-686 ohci_hcd
Sep 20 11:01:08 horizon kernel: [ 5.751520] usb usb4: SerialNumber:
0000:00:03.2
Sep 20 11:01:08 horizon kernel: [ 5.751520] ACPI: PCI Interrupt
0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
Sep 20 11:01:08 horizon kernel: [ 5.751520] ohci_hcd 0000:00:0b.0: OHCI Host
Controller
Sep 20 11:01:08 horizon kernel: [ 5.751520] ohci_hcd 0000:00:0b.0: new USB
bus registered, assigned bus number 5
Sep 20 11:01:08 horizon kernel: [ 5.751520] ohci_hcd 0000:00:0b.0: irq 19,
io mem 0xcfff5000
Sep 20 11:01:08 horizon kernel: [ 5.832175] usb usb5: configuration #1
chosen from 1 choice
Sep 20 11:01:08 horizon kernel: [ 5.832260] hub 5-0:1.0: USB hub found
Sep 20 11:01:08 horizon kernel: [ 5.832331] hub 5-0:1.0: 3 ports detected
Sep 20 11:01:08 horizon kernel: [ 5.935530] usb 2-3: not running at top
speed; connect to a high speed hub
Sep 20 11:01:08 horizon kernel: [ 5.938610] usb usb5: New USB device found,
idVendor=1d6b, idProduct=0001
Sep 20 11:01:08 horizon kernel: [ 5.938677] usb usb5: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Sep 20 11:01:08 horizon kernel: [ 5.938759] usb usb5: Product: OHCI Host
Controller
Sep 20 11:01:08 horizon kernel: [ 5.938822] usb usb5: Manufacturer: Linux
2.6.25-2-686 ohci_hcd
Sep 20 11:01:08 horizon kernel: [ 5.938887] usb usb5: SerialNumber:
0000:00:0b.0
Sep 20 11:01:08 horizon kernel: [ 5.938975] ACPI: PCI Interrupt
0000:00:0b.1[B] -> GSI 16 (level, low) -> IRQ 16
Sep 20 11:01:08 horizon kernel: [ 5.939103] ohci_hcd 0000:00:0b.1: OHCI Host
Controller
Sep 20 11:01:08 horizon kernel: [ 5.939190] ohci_hcd 0000:00:0b.1: new USB
bus registered, assigned bus number 6
Sep 20 11:01:08 horizon kernel: [ 5.939285] ohci_hcd 0000:00:0b.1: irq 16,
io mem 0xcfff6000
Sep 20 11:01:08 horizon kernel: [ 5.955077] usb 2-3: configuration #1 chosen
from 1 choice
Sep 20 11:01:08 horizon kernel: [ 5.957622] usb 2-3: New USB device found,
idVendor=058f, idProduct=6362
Sep 20 11:01:08 horizon kernel: [ 5.957622] usb 2-3: New USB device strings:
Mfr=1, Product=2, SerialNumber=3
Sep 20 11:01:08 horizon kernel: [ 5.957622] usb 2-3: Product: Mass Storage
Device
Sep 20 11:01:08 horizon kernel: [ 5.957622] usb 2-3: Manufacturer: Generic
Sep 20 11:01:08 horizon kernel: [ 5.957622] usb 2-3: SerialNumber:
058F312D81B
Sep 20 11:01:08 horizon kernel: [ 6.022643] usb usb6: configuration #1
chosen from 1 choice
Sep 20 11:01:08 horizon kernel: [ 6.022730] hub 6-0:1.0: USB hub found
Sep 20 11:01:08 horizon kernel: [ 6.022800] hub 6-0:1.0: 2 ports detected
Sep 20 11:01:08 horizon kernel: [ 6.126192] usb usb6: New USB device found,
idVendor=1d6b, idProduct=0001
Sep 20 11:01:08 horizon kernel: [ 6.126192] usb usb6: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Sep 20 11:01:08 horizon kernel: [ 6.126192] usb usb6: Product: OHCI Host
Controller
Sep 20 11:01:08 horizon kernel: [ 6.126192] usb usb6: Manufacturer: Linux
2.6.25-2-686 ohci_hcd
Sep 20 11:01:08 horizon kernel: [ 6.126192] usb usb6: SerialNumber:
0000:00:0b.1
Sep 20 11:01:08 horizon kernel: [ 6.126192] sata_sis 0000:00:05.0: version
1.0
Sep 20 11:01:08 horizon kernel: [ 6.126192] ACPI: PCI Interrupt
0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 17
Sep 20 11:01:08 horizon kernel: [ 6.126192] sata_sis 0000:00:05.0: Detected
SiS 180/181/964 chipset in SATA mode
Sep 20 11:01:08 horizon kernel: [ 6.126192] scsi2 : sata_sis
Sep 20 11:01:08 horizon kernel: [ 6.126192] scsi3 : sata_sis
Sep 20 11:01:08 horizon kernel: [ 6.126192] ata3: SATA max UDMA/133 cmd
0xd800 ctl 0xd400 bmdma 0xc800 irq 17
Sep 20 11:01:08 horizon kernel: [ 6.126192] ata4: SATA max UDMA/133 cmd
0xd000 ctl 0xcc00 bmdma 0xc808 irq 17
...................
Sep 20 11:01:08 horizon kernel: [ 6.500447] scsi4 : SCSI emulation for USB
Mass Storage devices
...................
Sep 20 11:01:08 horizon kernel: [ 6.591838] ata3: SATA link up 1.5 Gbps
(SStatus 113 SControl 300)
Sep 20 11:01:08 horizon kernel: [ 6.600209] ata3.00: ATA-7: Maxtor 6Y120M0,
YAR51EW0, max UDMA/133
Sep 20 11:01:08 horizon kernel: [ 6.600283] ata3.00: 240121728 sectors,
multi 16: LBA
Sep 20 11:01:08 horizon kernel: [ 6.619711] ata3.00: configured for UDMA/133
Sep 20 11:01:08 horizon kernel: [ 7.092140] ata4: SATA link up 1.5 Gbps
(SStatus 113 SControl 300)
Sep 20 11:01:08 horizon kernel: [ 7.100243] ata4.00: ATA-7: SAMSUNG HD103UJ,
1AA01112, max UDMA7
Sep 20 11:01:08 horizon kernel: [ 7.100310] ata4.00: 1953525168 sectors,
multi 16: LBA48 NCQ (depth 0/32)
Sep 20 11:01:08 horizon kernel: [ 7.110918] ata4.00: configured for UDMA/133
Sep 20 11:01:08 horizon kernel: [ 7.110918] scsi 2:0:0:0: Direct-Access
ATA Maxtor 6Y120M0 YAR5 PQ: 0 ANSI: 5
Sep 20 11:01:08 horizon kernel: [ 7.110918] sd 2:0:0:0: [sdb] 240121728
512-byte hardware sectors (122942 MB)
Sep 20 11:01:08 horizon kernel: [ 7.110918] sd 2:0:0:0: [sdb] Write Protect
is off
Sep 20 11:01:08 horizon kernel: [ 7.110918] sd 2:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Sep 20 11:01:08 horizon kernel: [ 7.110918] sd 2:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or
FUA
Sep 20 11:01:08 horizon kernel: [ 7.110918] sd 2:0:0:0: [sdb] 240121728
512-byte hardware sectors (122942 MB)
Sep 20 11:01:08 horizon kernel: [ 7.110918] sd 2:0:0:0: [sdb] Write Protect
is off
Sep 20 11:01:08 horizon kernel: [ 7.110918] sd 2:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Sep 20 11:01:08 horizon kernel: [ 7.110918] sd 2:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or
FUA
Sep 20 11:01:08 horizon kernel: [ 7.110918] sdb: sdb1
Sep 20 11:01:08 horizon kernel: [ 7.116746] sd 2:0:0:0: [sdb] Attached SCSI
disk
Sep 20 11:01:08 horizon kernel: [ 7.116746] scsi 3:0:0:0: Direct-Access
ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
Sep 20 11:01:08 horizon kernel: [ 7.116746] sd 3:0:0:0: [sdc] 1953525168
512-byte hardware sectors (1000205 MB)
Sep 20 11:01:08 horizon kernel: [ 7.116761] sd 3:0:0:0: [sdc] Write Protect
is off
Sep 20 11:01:08 horizon kernel: [ 7.116825] sd 3:0:0:0: [sdc] Mode Sense: 00
3a 00 00
Sep 20 11:01:08 horizon kernel: [ 7.116848] sd 3:0:0:0: [sdc] Write cache:
enabled, read cache: enabled, doesn't support DPO or
FUA
Sep 20 11:01:08 horizon kernel: [ 7.116977] sd 3:0:0:0: [sdc] 1953525168
512-byte hardware sectors (1000205 MB)
Sep 20 11:01:08 horizon kernel: [ 7.117070] sd 3:0:0:0: [sdc] Write Protect
is off
Sep 20 11:01:08 horizon kernel: [ 7.117134] sd 3:0:0:0: [sdc] Mode Sense: 00
3a 00 00
Sep 20 11:01:08 horizon kernel: [ 7.117156] sd 3:0:0:0: [sdc] Write cache:
enabled, read cache: enabled, doesn't support DPO or
FUA
Sep 20 11:01:08 horizon kernel: [ 7.117242] sdc: sdc1
Sep 20 11:01:08 horizon kernel: [ 7.135744] sd 3:0:0:0: [sdc] Attached SCSI
disk
Sep 20 11:01:08 horizon kernel: [ 7.169268] hda: ATAPI 40X DVD-ROM DVD-R
CD-R/RW drive, 2000kB Cache
Sep 20 11:01:08 horizon kernel: [ 7.169576] Uniform CD-ROM driver Revision:
3.20
Sep 20 11:01:08 horizon kernel: [ 7.187768] hdc: ATAPI 48X DVD-ROM DVD-R-RAM
CD-R/RW drive, 2048kB Cache
Sep 20 11:01:08 horizon kernel: [ 14.017317] device-mapper: uevent: version
1.0.3
Sep 20 11:01:08 horizon kernel: [ 14.023803] device-mapper: ioctl:
4.13.0-ioctl (2007-10-18) initialised: [EMAIL PROTECTED]
Sep 20 11:01:08 horizon kernel: [ 14.293307] XFS mounting filesystem sda2
Sep 20 11:01:08 horizon kernel: [ 14.447769] Ending clean XFS mount for
filesystem: sda2
Sep 20 11:01:08 horizon kernel: [ 14.484198] XFS mounting filesystem sdb1
Sep 20 11:01:08 horizon kernel: [ 14.573942] Ending clean XFS mount for
filesystem: sdb1
Sep 20 11:01:08 horizon kernel: [ 14.598756] XFS mounting filesystem sdc1
Sep 20 11:01:08 horizon kernel: [ 14.752463] Ending clean XFS mount for
filesystem: sdc1
...................
<END 2.6.25-2-686>
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-4) ([EMAIL PROTECTED]) (gcc version
4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Aug 28 12:00:54 UTC
2008
** Command line:
root=/dev/sda1
** Tainted: P (1)
** Kernel log:
[ 5.576075] usb 3-1: New USB device found, idVendor=046d, idProduct=c049
[ 5.576152] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.576220] usb 3-1: Product: USB Gaming Mouse
[ 5.576283] usb 3-1: Manufacturer: Logitech
[ 5.675382] Initializing USB Mass Storage driver...
[ 5.675568] scsi2 : SCSI emulation for USB Mass Storage devices
[ 5.675732] usbcore: registered new interface driver usb-storage
[ 5.675799] USB Mass Storage support registered.
[ 5.679764] usb-storage: device found at 2
[ 5.679770] usb-storage: waiting for device to settle before scanning
[ 5.757461] usbcore: registered new interface driver hiddev
[ 5.762312] input: Logitech USB Gaming Mouse as /class/input/input1
[ 5.767746] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse]
on usb-0000:00:03.2-1
[ 5.776034] ata1: SATA link down (SStatus 0 SControl 310)
[ 5.776868] hiddev96hidraw1: USB HID v1.11 Device [Logitech USB Gaming
Mouse] on usb-0000:00:03.2-1
[ 5.777095] usbcore: registered new interface driver usbhid
[ 5.777161] usbhid: v2.6:USB HID core driver
[ 6.096032] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 6.104407] ata2.00: ATA-7: SAMSUNG HD103UJ, 1AA01112, max UDMA7
[ 6.104474] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 6.112391] ata2.00: configured for UDMA/100
[ 6.112635] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0
PQ: 0 ANSI: 5
[ 6.150522] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
[ 6.150834] Uniform CD-ROM driver Revision: 3.20
[ 6.156259] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00110600571a382d]
[ 6.171441] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 6.171916] Driver 'sd' needs updating - please use bus_type methods
[ 6.172197] sd 1:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205
MB)
[ 6.172298] sd 1:0:0:0: [sda] Write Protect is off
[ 6.172372] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.172400] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.172591] sd 1:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205
MB)
[ 6.175854] sd 1:0:0:0: [sda] Write Protect is off
[ 6.175919] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.175944] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.176052] sda: sda1 sda2
[ 6.181091] sd 1:0:0:0: [sda] Attached SCSI disk
[ 6.406315] SGI XFS with ACLs, security attributes, realtime, large block
numbers, no debug enabled
[ 6.408311] SGI XFS Quota Management subsystem
[ 6.429714] XFS mounting filesystem sda1
[ 6.644783] Ending clean XFS mount for filesystem: sda1
[ 7.506912] udevd version 125 started
[ 8.786573] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.788796] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.818144] Linux agpgart interface v0.103
[ 8.823357] agpgart: Detected SiS chipset - id:1862
[ 8.827966] agpgart: AGP aperture is 64M @ 0xd0000000
[ 8.951413] input: Power Button (FF) as /class/input/input2
[ 8.984138] ACPI: Power Button (FF) [PWRF]
[ 8.984295] input: Power Button (CM) as /class/input/input3
[ 9.016118] ACPI: Power Button (CM) [PWRB]
[ 9.824372] gameport: EMU10K1 is pci0000:00:0a.1/gameport0, io 0xdc00, speed
1242kHz
[ 10.165640] input: PC Speaker as /class/input/input4
[ 10.293690] Error: Driver 'pcspkr' is already registered, aborting...
[ 10.307569] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) ->
IRQ 18
[ 10.475037] parport_pc 00:09: reported by Plug and Play ACPI
[ 10.475210] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 10.597968] gameport: NS558 PnP Gameport is pnp00:0a/gameport0, io 0x200,
speed 917kHz
[ 10.677658] usb-storage: device scan complete
[ 10.684656] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00
PQ: 0 ANSI: 0
[ 10.691672] scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01
PQ: 0 ANSI: 0
[ 10.698629] scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02
PQ: 0 ANSI: 0
[ 10.705640] scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03
PQ: 0 ANSI: 0
[ 10.716744] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 10.727722] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[ 10.738764] sd 2:0:0:2: [sdd] Attached SCSI removable disk
[ 10.749728] sd 2:0:0:3: [sde] Attached SCSI removable disk
[ 12.997351] fuse init (API version 7.9)
[ 13.144157] w83627hf: Found W83697HF chip at 0x290
[ 13.232023] device-mapper: uevent: version 1.0.3
[ 13.238606] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
[EMAIL PROTECTED]
[ 13.509561] XFS mounting filesystem sda2
[ 13.644012] Ending clean XFS mount for filesystem: sda2
[ 14.264675] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.503369] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 16.680850] eth0: Media Link On 100mbps full-duplex
[ 19.271258] NET: Registered protocol family 10
[ 19.271964] lo: Disabled Privacy Extensions
[ 19.714222] RPC: Registered udp transport module.
[ 19.714313] RPC: Registered tcp transport module.
[ 19.820096] Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
[ 27.260113] tun: Universal TUN/TAP device driver, 1.6
[ 27.260205] tun: (C) 1999-2004 Max Krasnyansky <[EMAIL PROTECTED]>
[ 27.262960] tun0: Disabled Privacy Extensions
[ 28.242001] lp0: using parport0 (interrupt-driven).
[ 28.272956] ppdev: user-space parallel port driver
[ 29.828009] eth0: no IPv6 routers present
[ 31.443621] NET: Registered protocol family 23
[ 31.460006] usbcore: registered new interface driver stir4200
[ 32.666127] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 32.666271] NFSD: starting 90-second grace period
[ 34.048362] warning: `pure-ftpd-virtu' uses 32-bit capabilities (legacy
support in use)
[ 37.532011] cdrom: This disc doesn't have any tracks I recognize!
[ 243.430925] nvidia: module license 'NVIDIA' taints kernel.
[ 243.687429] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 243.688012] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.09 Wed Jun
4 23:43:17 PDT 2008
[ 244.055710] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 244.055734] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 244.055738] agpgart: SiS delay workaround: giving bridge time to recover.
[ 244.068105] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
** Loaded modules:
Module Size Used by
nvidia 7086148 44
binfmt_misc 7528 1
stir4200 8548 0
irda 95480 1 stir4200
crc_ccitt 2080 1 irda
ppdev 6468 0
lp 8164 0
tun 8292 1
video 16400 0
output 2912 1 video
ac 4196 0
battery 10180 0
nfsd 186704 17
auth_rpcgss 33952 1 nfsd
exportfs 3904 1 nfsd
nfs 213896 0
lockd 54248 2 nfsd,nfs
nfs_acl 2912 2 nfsd,nfs
sunrpc 162176 13 nfsd,auth_rpcgss,nfs,lockd,nfs_acl
ipv6 235204 35
iptable_nat 4680 0
nf_nat 15576 1 iptable_nat
iptable_mangle 2688 0
nf_conntrack_ipv4 12268 4 iptable_nat,nf_nat
xt_state 2016 1
nf_conntrack 55508 4 iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state
xt_tcpudp 2816 20
iptable_filter 2624 1
ip_tables 10160 3 iptable_nat,iptable_mangle,iptable_filter
x_tables 13284 4 iptable_nat,xt_state,xt_tcpudp,ip_tables
dm_snapshot 14340 0
dm_mirror 15104 0
dm_log 8452 1 dm_mirror
dm_mod 46184 3 dm_snapshot,dm_mirror,dm_log
w83627hf 20984 0
hwmon_vid 2720 1 w83627hf
eeprom 5232 0
i2c_core 19828 2 nvidia,eeprom
fuse 42908 1
psmouse 32336 0
ide_disk 10496 0
snd_emu10k1_synth 5664 0
snd_emux_synth 27936 1 snd_emu10k1_synth
ns558 3712 0
parport_pc 22500 1
parport 30988 3 ppdev,lp,parport_pc
snd_seq_virmidi 4896 1 snd_emux_synth
snd_seq_midi_emul 5376 1 snd_emux_synth
snd_emu10k1 115200 5 snd_emu10k1_synth
firmware_class 6816 1 snd_emu10k1
snd_ac97_codec 88484 1 snd_emu10k1
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
ac97_bus 1728 1 snd_ac97_codec
snd_util_mem 4032 2 snd_emux_synth,snd_emu10k1
snd_hwdep 6212 2 snd_emux_synth,snd_emu10k1
snd_seq_dummy 2660 0
pcspkr 2432 0
snd_pcm 62628 4 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 7816 2 snd_emu10k1,snd_pcm
snd_seq_oss 24992 0
snd_seq_midi 5728 0
snd_rawmidi 18560 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi
snd_seq_midi_event 6432 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
emu10k1_gp 2688 0
gameport 10700 4 ns558,emu10k1_gp
snd_seq 41456 9
snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 17800 3 snd_emu10k1,snd_pcm,snd_seq
snd_seq_device 6380 8
snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 45604 20
snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_hwdep,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 6368 1 snd
button 6064 0
sis_agp 6752 1
agpgart 28776 2 nvidia,sis_agp
shpchp 25528 0
pci_hotplug 23460 1 shpchp
evdev 8000 3
xfs 458040 2
sd_mod 22200 3
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
pata_sis 9796 0
usbhid 35904 0
hid 33184 1 usbhid
ff_memless 4392 1 usbhid
usb_storage 75936 0
ata_generic 4676 0
floppy 47716 0
sata_sil 7176 2
libata 140416 3 pata_sis,ata_generic,sata_sil
scsi_mod 129356 3 sd_mod,usb_storage,libata
dock 8272 1 libata
natsemi 23616 0
ehci_hcd 28428 0
ohci1394 24944 0
ieee1394 75800 1 ohci1394
sis900 17312 0
mii 4896 1 sis900
ohci_hcd 18500 0
usbcore 118160 6 stir4200,usbhid,usb_storage,ehci_hcd,ohci_hcd
sis5513 6788 0 [permanent]
ide_pci_generic 3908 0 [permanent]
ide_core 92628 4 ide_disk,ide_cd_mod,sis5513,ide_pci_generic
thermal 15228 0
processor 32576 1 thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 746 Host
[1039:0746] (rev 10)
Subsystem: ASRock Incorporation Device [1849:0746]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-sis
Kernel modules: sis-agp
00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] SG86C202 [1039:0002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=01, subordinate=02, sec-latency=32
Memory behind bridge: cbc00000-cfdfffff
Prefetchable memory behind bridge: ab900000-cbafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS964 [MuTIOL
Media IO] [1039:0964] (rev 36)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE]
[1039:5513] (rev 01) (prog-if 80 [Master])
Subsystem: ASRock Incorporation Device [1849:5513]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: <access denied>
Kernel driver in use: SIS_IDE
Kernel modules: pata_sis, sis5513
00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1
Controller [1039:7001] (rev 0f) (prog-if 10)
Subsystem: ASRock Incorporation Device [1849:7001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at cfff9000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1
Controller [1039:7001] (rev 0f) (prog-if 10)
Subsystem: ASRock Incorporation Device [1849:7001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 0: Memory at cfffa000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:03.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1
Controller [1039:7001] (rev 0f) (prog-if 10)
Subsystem: ASRock Incorporation Device [1849:7001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 22
Region 0: Memory at cfffb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI
Fast Ethernet [1039:0900] (rev 90)
Subsystem: ASRock Incorporation Device [1849:8201]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (13000ns min, 2750ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at c000 [size=256]
Region 1: Memory at cfff8000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 50000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sis900
Kernel modules: sis900
00:05.0 RAID bus controller [0104]: Silicon Integrated Systems [SiS] RAID bus
controller 180 SATA/PATA [SiS] [1039:0180] (rev 01) (prog-if 85)
Subsystem: ASRock Incorporation Device [1849:0180]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at d800 [size=8]
Region 1: I/O ports at d400 [size=4]
Region 2: I/O ports at d000 [size=8]
Region 3: I/O ports at cc00 [size=4]
Region 4: I/O ports at c800 [size=16]
Region 5: I/O ports at c400 [size=128]
Capabilities: <access denied>
00:09.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host
Controller [1106:3044] (rev 46) (prog-if 10)
Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at cfff7800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at bc00 [size=128]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
00:0a.0 Multimedia audio controller [0401]: Creative Labs SB Live! EMU10k1
[1102:0002] (rev 0a)
Subsystem: Creative Labs Device [1102:100a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at b800 [size=32]
Capabilities: <access denied>
Kernel driver in use: EMU10K1_Audigy
Kernel modules: snd-emu10k1
00:0a.1 Input device controller [0980]: Creative Labs SB Live! Game Port
[1102:7002] (rev 0a)
Subsystem: Creative Labs Device [1102:0020]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: I/O ports at dc00 [size=8]
Capabilities: <access denied>
Kernel driver in use: Emu10k1_gameport
Kernel modules: emu10k1-gp
00:0b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
(prog-if 10)
Subsystem: Device [1631:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at cfff5000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:0b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
(prog-if 10)
Subsystem: Device [1631:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 16
Region 0: Memory at cfff6000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:0b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04)
(prog-if 20)
Subsystem: Device [1631:1600]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 8500ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 17
Region 0: Memory at cfff7700 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:0c.0 Ethernet controller [0200]: National Semiconductor Corporation DP83815
(MacPhyter) Ethernet Controller [100b:0020]
Subsystem: Netgear Device [1385:f311]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2750ns min, 13000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at b400 [size=256]
Region 1: Memory at cfff4000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 50020000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: natsemi
Kernel modules: natsemi
00:0d.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3112
[SATALink/SATARaid] Serial ATA Controller [1095:3112] (rev 02)
Subsystem: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA
Controller [1095:3112]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at ac00 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at a400 [size=4]
Region 4: I/O ports at a000 [size=16]
Region 5: Memory at cfff7400 (32-bit, non-prefetchable) [size=512]
Expansion ROM at cff00000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
Kernel modules: sata_sil
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV43 [GeForce 6600
GT] [10de:00f1] (rev a2)
Subsystem: Giga-byte Technology Device [1458:3150]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at b0000000 (32-bit, prefetchable) [size=256M]
Region 2: Memory at cd000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at cfde0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-13 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf-show failed
--- End Message ---
