Package: linux-image-2.6.24-1-686
Version: 2.6.24-6
Severity: critical
Justification: breaks unrelated software
Hi,
I'm not sure if this is correct package to report the bug for. Anyway,
my ndiswrapper device, which was previously renamed into eth2, now
became wlan0_rename (sic). Also, colleague experiences similar issues
with his ipw3945 card.
I've placed severity "critical" since I have some wireless tools that broke
due to this unexpected device name change.
-- Package-specific info:
** Version:
Linux version 2.6.24-1-686 (Debian 2.6.24-6) ([EMAIL PROTECTED]) (gcc version
4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Sat Apr 19 00:37:55 UTC
2008
** Command line:
root=/dev/hda5 vga=791 resume=/dev/hda8 ro
** Tainted: P (1)
** Kernel log:
ICH6: IDE port disabled
Probing IDE interface ide0...
Clocksource tsc unstable (delta = -162008622 ns)
hdb: SONY DVD+/-RW DW-Q58A, ATAPI CD/DVD-ROM drive
hda: WDC WD600VE-75HDT1, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 17 (level, low) -> IRQ 18
ssb: Sonics Silicon Backplane found on PCI device 0000:02:03.0
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 19
SCSI subsystem initialized
libata version 3.00 loaded.
ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:15:c5:65:b3:1d
hda: max request size: 128KiB
udev: renamed network interface eth0 to eth1
hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63
hda: cache flushes supported
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 >
hdb: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
agpgart: Detected an Intel 915GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xc0000000
intel_rng: FWH not detected
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PBTN]
input: Sleep Button (CM) as /class/input/input3
ACPI: Sleep Button (CM) [SBTN]
Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad as /class/input/input4
ACPI: Battery Slot [BAT0] (battery present)
input: Video Bus as /class/input/input5
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /class/input/input6
ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64
b43-phy0: Broadcom 4318 WLAN found
phy0: Selected rate control algorithm 'simple'
udev: renamed network interface wmaster0 to eth2
Adding 530104k swap on /dev/hda9. Priority:-1 extents:1 across:530104k
EXT3 FS on hda5, internal journal
loop: module loaded
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
irda_init()
NET: Registered protocol family 23
irda_register_dongle : registering dongle "ACTiSYS ACT-IR200L" (10).
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [EMAIL PROTECTED]
fuse init (API version 7.9)
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
NET: Registered protocol family 4
NET: Registered protocol family 3
NET: Registered protocol family 5
b44: eth1: Link is up at 100 Mbps, full duplex.
b44: eth1: Flow control is off for TX and off for RX.
ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
usbcore: registered new interface driver ndiswrapper
** Loaded modules:
Module Size Used by
ndiswrapper 174588 0
appletalk 33408 2
ax25 49872 2
ipx 25892 2
p8023 2112 1 ipx
snd_rtctimer 3648 1
binfmt_misc 11240 1
i915 22048 2
drm 74132 3 i915
bnep 14816 2
rfcomm 36784 7
hidp 18368 2
hid 34272 1 hidp
l2cap 22880 18 bnep,rfcomm,hidp
bluetooth 53636 6 bnep,rfcomm,hidp,l2cap
nfs 228168 0
lockd 60744 1 nfs
nfs_acl 3520 1 nfs
sunrpc 170780 6 nfs,lockd,nfs_acl
nls_iso8859_1 4128 2
nls_cp437 5792 2
vfat 12224 2
fat 48764 1 vfat
fuse 45204 1
dm_snapshot 16964 0
dm_mirror 21600 0
dm_mod 55812 2 dm_snapshot,dm_mirror
snd_virmidi 5184 0
snd_emux_synth 31136 0
snd_seq_virmidi 6784 2 snd_virmidi,snd_emux_synth
snd_util_mem 4544 1 snd_emux_synth
snd_opl3_synth 14148 0
snd_seq_instr 7360 1 snd_opl3_synth
snd_seq_midi_emul 5920 2 snd_emux_synth,snd_opl3_synth
snd_seq_dummy 3780 0
snd_seq_oss 29472 0
snd_seq_midi 8160 0
snd_rawmidi 22624 2 snd_seq_virmidi,snd_seq_midi
snd_seq_midi_event 6976 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
snd_seq 46544 12
snd_emux_synth,snd_seq_virmidi,snd_opl3_synth,snd_seq_instr,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_ainstr_fm 2400 1 snd_opl3_synth
snd_opl3_lib 9920 1 snd_opl3_synth
snd_seq_device 7820 8
snd_emux_synth,snd_opl3_synth,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq,snd_opl3_lib
snd_hwdep 8804 2 snd_emux_synth,snd_opl3_lib
vga16fb 13132 0
act200l_sir 3552 0
sir_dev 15460 1 act200l_sir
irda 174236 2 act200l_sir,sir_dev
crc_ccitt 2176 1 irda
cpufreq_ondemand 8492 1
p4_clockmod 5412 0
speedstep_lib 5348 1 p4_clockmod
freq_table 4512 2 cpufreq_ondemand,p4_clockmod
i810fb 30620 0
vgastate 8288 2 vga16fb,i810fb
loop 16804 0
arc4 2016 2
ecb 3552 2
blkcipher 6724 1 ecb
b43 105696 0
joydev 11360 0
rfkill 7312 1 b43
mac80211 114380 1 b43
cfg80211 13480 1 mac80211
led_class 5156 1 b43
input_polldev 5000 1 b43
snd_hda_intel 275264 1
snd_pcm_oss 38272 0
snd_mixer_oss 15296 1 snd_pcm_oss
snd_pcm 71780 2 snd_hda_intel,snd_pcm_oss
snd_timer 21092 4 snd_rtctimer,snd_seq,snd_opl3_lib,snd_pcm
video 18672 0
output 3744 1 video
battery 13572 0
button 8432 0
ac 6116 0
snd 48612 18
snd_virmidi,snd_emux_synth,snd_seq_virmidi,snd_opl3_synth,snd_seq_oss,snd_rawmidi,snd_seq,snd_opl3_lib,snd_seq_device,snd_hwdep,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
psmouse 36464 0
soundcore 7552 1 snd
serio_raw 6660 0
intel_agp 23412 1
snd_page_alloc 10056 2 snd_hda_intel,snd_pcm
iTCO_wdt 11268 0
evdev 11104 7
agpgart 31688 4 drm,i810fb,intel_agp
rtc 13052 1 snd_rtctimer
ext3 122888 2
jbd 43732 1 ext3
mbcache 8288 1 ext3
ide_cd 36224 0
cdrom 32512 1 ide_cd
ide_disk 15648 7
ata_generic 7428 0
libata 144464 1 ata_generic
scsi_mod 141164 1 libata
b44 25488 0
generic 4388 0 [permanent]
ssb 30628 2 b43,b44
piix 7492 0 [permanent]
ide_core 108292 4 ide_cd,ide_disk,generic,piix
pcmcia 37036 2 b43,ssb
pcmcia_core 36884 2 b43,pcmcia
firmware_class 9312 2 b43,pcmcia
mii 5312 1 b44
ehci_hcd 32524 0
uhci_hcd 23376 0
usbcore 132940 4 ndiswrapper,ehci_hcd,uhci_hcd
thermal 16028 0
processor 36520 2 thermal
fan 4772 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML
Express Processor to DRAM Controller [8086:2590] (rev 03)
Subsystem: Dell Device [1028:01c9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile
915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 03)
Subsystem: Dell Device [1028:01c9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dff00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at eff8 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at dfec0000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
Kernel modules: intelfb
00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML
Express Graphics Controller [8086:2792] (rev 03)
Subsystem: Dell Device [1028:01c9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at dff80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) High Definition Audio Controller [8086:2668] (rev 03)
Subsystem: Dell Device [1028:01c9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfebc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 1 [8086:2660] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 4 [8086:2666] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dfc00000-dfdfffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 [8086:2658] (rev 03)
Subsystem: Dell Device [1028:01c9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at bf80 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 [8086:2659] (rev 03)
Subsystem: Dell Device [1028:01c9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 4: I/O ports at bf60 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 [8086:265a] (rev 03)
Subsystem: Dell Device [1028:01c9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at bf40 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 [8086:265b] (rev 03)
Subsystem: Dell Device [1028:01c9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 17
Region 4: I/O ports at bf20 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20)
Subsystem: Dell Device [1028:01c9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev d3) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: dfb00000-dfbfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface
Bridge [8086:2641] (rev 03)
Subsystem: Dell Device [1028:01c9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: intel-rng, iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) IDE Controller [8086:266f] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:01c9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at bfa0 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
02:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX
[14e4:170c] (rev 02)
Subsystem: Dell Device [1028:01c9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 19
Region 0: Memory at dfbfc000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: b44
Kernel modules: b44
02:03.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One
54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
Subsystem: Dell Device [1028:0005]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 18
Region 0: Memory at dfbfe000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (1000, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.24-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.24-1-686 depends on:
ii debconf [debconf-2.0] 1.5.21 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.24-1-686 recommends:
ii libc6-i686 2.7-10 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.24-1-686/preinst/overwriting-modules-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/bootloader-error-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/create-kimage-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/prerm/would-invalidate-boot-loader-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/initrd-2.6.24-1-686:
linux-image-2.6.24-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.24-1-686/preinst/abort-install-2.6.24-1-686:
linux-image-2.6.24-1-686/prerm/removing-running-kernel-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/abort-overwrite-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/bootloader-test-error-2.6.24-1-686:
linux-image-2.6.24-1-686/preinst/lilo-initrd-2.6.24-1-686: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.24-1-686/postinst/old-system-map-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/failed-to-move-modules-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/depmod-error-initrd-2.6.24-1-686: false
linux-image-2.6.24-1-686/preinst/bootloader-initrd-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/old-initrd-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/old-dir-initrd-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/depmod-error-2.6.24-1-686: false
linux-image-2.6.24-1-686/preinst/elilo-initrd-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/kimage-is-a-directory:
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
