Package: xserver-xfree86
Version: 4.3.0.dfsg.1-12.0.1
Severity: serious
Justification: Breaks functionality on upgrade
Following upgrade from Woody, 'dpkg-reconfigure xserver-xfree86'
silently becomes a no-op because no /var/lib/xfree86/XF86Config-4.md5sum
file exists. This causes an unexpected regression in behaviour from
Woody (which predates 4.2.1-11) which is only documented in XF86Config-4
as generated _after_ you fix that problem. I ran into this after my
PS/2 mouse broke under GPM+X and I needed to reconfigure it.
The issue is really that 'dpkg-reconfigure xserver-xfree86' does not
tell you that it is not controlling XF86Config-4 and even worse refuses
to create a new copy if you delete the file leaving the average user at
a loss to fix their system. There are a slew of bugs arising from just
this scenario in the BTS. The information is implicitly there in the
NEWS.Debian.gz but probably needs to be documented clearly in the
Release Notes.
Note: the problem occurred on another machine so the info below is
somewhat misleading.
-- Package-specific info:
Contents of /var/lib/xfree86/X.roster:
xserver-xfree86
/etc/X11/X target unchanged from checksum in /var/lib/xfree86/X.md5sum.
X server symlink status:
lrwxrwxrwx 1 root root 20 Sep 14 2004 /etc/X11/X -> /usr/bin/X11/XFree86
-rwxr-xr-x 1 root root 1745900 Feb 23 11:07 /usr/bin/X11/XFree86
Contents of /var/lib/xfree86/XF86Config-4.roster:
xserver-xfree86
VGA-compatible devices on PCI bus:
0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
65x/M650/740 PCI/AGP VGA Display Adapter
/etc/X11/XF86Config-4 unchanged from checksum in
/var/lib/xfree86/XF86Config-4.md5sum.
XFree86 X server configuration file status:
-rw-r--r-- 1 root root 3277 May 20 13:22 /etc/X11/XF86Config-4
Contents of /etc/X11/XF86Config-4:
# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "sis"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30-72
VertRefresh 50-120
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
XFree86 X server log files on system:
-rw-r--r-- 1 root root 44187 May 20 14:00 /var/log/XFree86.0.log
Contents of most recent XFree86 X server log file
/var/log/XFree86.0.log:
XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-12.0.1 20050223080930 [EMAIL
PROTECTED])
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.9 i686 [ELF]
Build Date: 23 February 2005
This version of XFree86 has been extensively modified by the Debian
Project, and is not supported by the XFree86 Project, Inc., in any
way. Bugs should be reported to the Debian Bug Tracking System; see
<URL: http://www.debian.org/Bugs/Reporting >.
We strongly encourage the use of the "reportbug" package and command
to ensure that bug reports contain as much useful information as
possible.
Before filing a bug report, you may want to consult the Debian X FAQ:
XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml
plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz
Module Loader present
OS Kernel: Linux version 2.6.8-2-686 ([EMAIL PROTECTED]) (gcc version 3.3.5
(Debian 1:3.3.5-6)) #1 Mon Jan 24 03:58:38 EST 2005
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Apr 28 15:41:13 2005
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Generic Monitor"
(**) | |-->Device "Generic Video Card"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(**) FontPath set to
"unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/cyrillic,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000680c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0651 card 147b,1801 rev 02 class 06,00,00 hdr 80
(II) PCI: 00:01:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 1039,0962 card 0000,0000 rev 25 class 06,01,00 hdr 80
(II) PCI: 00:02:1: chip 1039,0016 card 0000,0000 rev 00 class 0c,05,00 hdr 00
(II) PCI: 00:02:5: chip 1039,5513 card 147b,1801 rev 00 class 01,01,80 hdr 00
(II) PCI: 00:02:7: chip 1039,7012 card 147b,1801 rev a0 class 04,01,00 hdr 00
(II) PCI: 00:03:0: chip 1039,7001 card 147b,1801 rev 0f class 0c,03,10 hdr 80
(II) PCI: 00:03:1: chip 1039,7001 card 147b,1801 rev 0f class 0c,03,10 hdr 00
(II) PCI: 00:03:3: chip 1039,7002 card 147b,1801 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:0d:0: chip 10ec,8139 card 147b,1801 rev 10 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1039,6325 card 147b,1801 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[2] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[3] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe00fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] SiS650/651/M650/740 PCI/AGP
VGA Display Adapter rev 0, Mem @ 0xd8000000/27, 0xe0000000/17, I/O @ 0xd000/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff to
0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe0103000 - 0xe01030ff (0x100) MX[B]
[1] -1 0 0xe0102000 - 0xe0102fff (0x1000) MX[B]
[2] -1 0 0xe0101000 - 0xe0101fff (0x1000) MX[B]
[3] -1 0 0xe0100000 - 0xe0100fff (0x1000) MX[B]
[4] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[5] -1 0 0xe0000000 - 0xe001ffff (0x20000) MX[B](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[7] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[8] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B]
[9] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[10] -1 0 0x00004000 - 0x0000400f (0x10) IX[B]
[11] -1 0 0x00001080 - 0x0000109f (0x20) IX[B]
[12] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe0103000 - 0xe01030ff (0x100) MX[B]
[1] -1 0 0xe0102000 - 0xe0102fff (0x1000) MX[B]
[2] -1 0 0xe0101000 - 0xe0101fff (0x1000) MX[B]
[3] -1 0 0xe0100000 - 0xe0100fff (0x1000) MX[B]
[4] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[5] -1 0 0xe0000000 - 0xe001ffff (0x20000) MX[B](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[7] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[8] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B]
[9] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[10] -1 0 0x00004000 - 0x0000400f (0x10) IX[B]
[11] -1 0 0x00001080 - 0x0000109f (0x20) IX[B]
[12] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe0103000 - 0xe01030ff (0x100) MX[B]
[6] -1 0 0xe0102000 - 0xe0102fff (0x1000) MX[B]
[7] -1 0 0xe0101000 - 0xe0101fff (0x1000) MX[B]
[8] -1 0 0xe0100000 - 0xe0100fff (0x1000) MX[B]
[9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[10] -1 0 0xe0000000 - 0xe001ffff (0x20000) MX[B](B)
[11] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[15] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B]
[16] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[17] -1 0 0x00004000 - 0x0000400f (0x10) IX[B]
[18] -1 0 0x00001080 - 0x0000109f (0x20) IX[B]
[19] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No
symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No
symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No
symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o": No
symbols found
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "pex5"
(WW) Warning, couldn't open module pex5
(II) UnloadModule: "pex5"
(EE) Failed to load module "pex5" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols
found
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "xie"
(WW) Warning, couldn't open module xie
(II) UnloadModule: "xie"
(EE) Failed to load module "xie" (module does not exist, 0)
(II) LoadModule: "sis"
(II) Loading /usr/X11R6/lib/modules/drivers/sis_drv.o
(II) Module sis: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.7.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
SIS315PRO, SIS550, SIS650/M650/651/740, SIS330(Xabre),
SIS660/661FX/M661FX/M661MX/741/741GX/M741/760/M760, SIS340
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset SIS650/M650/651/740 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe0103000 - 0xe01030ff (0x100) MX[B]
[6] -1 0 0xe0102000 - 0xe0102fff (0x1000) MX[B]
[7] -1 0 0xe0101000 - 0xe0101fff (0x1000) MX[B]
[8] -1 0 0xe0100000 - 0xe0100fff (0x1000) MX[B]
[9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[10] -1 0 0xe0000000 - 0xe001ffff (0x20000) MX[B](B)
[11] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[15] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B]
[16] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[17] -1 0 0x00004000 - 0x0000400f (0x10) IX[B]
[18] -1 0 0x00001080 - 0x0000109f (0x20) IX[B]
[19] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe0103000 - 0xe01030ff (0x100) MX[B]
[6] -1 0 0xe0102000 - 0xe0102fff (0x1000) MX[B]
[7] -1 0 0xe0101000 - 0xe0101fff (0x1000) MX[B]
[8] -1 0 0xe0100000 - 0xe0100fff (0x1000) MX[B]
[9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[10] -1 0 0xe0000000 - 0xe001ffff (0x20000) MX[B](B)
[11] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[18] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B]
[19] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[20] -1 0 0x00004000 - 0x0000400f (0x10) IX[B]
[21] -1 0 0x00001080 - 0x0000109f (0x20) IX[B]
[22] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
[23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) SIS(0): SiS driver (2004/08/20-1)
(II) SIS(0): Copyright (C) 2001-2004 Thomas Winischhofer <[EMAIL PROTECTED]>
and others
(II) SIS(0): Compiled for XFree86 version 4.3.0.1
(II) SIS(0): See http://www.winischhofer.net/linuxsisvga.shtml for
documentation and updates
(--) SIS(0): This adapter is primary display adapter
(II) SIS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0xcc80
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) SIS(0): sisfb not found
(--) SIS(0): Relocated IO registers at 0xD000
(**) SIS(0): Depth 24, (--) framebuffer bpp 32
(==) SIS(0): RGB weight 888
(==) SIS(0): Default visual is TrueColor
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(--) SIS(0): Video BIOS version "1.12.06" found (old data layout)
(==) SIS(0): Using HW cursor
(==) SIS(0): Color HW cursor is enabled
(II) SIS(0): Using VRAM command queue, size 512k
(II) SIS(0): Hotkey display switching is enabled
(II) SIS(0): WARNING: Using the Hotkey might freeze your machine, regardless
(II) SIS(0): whether enabled or disabled. This is no driver bug.
(==) SIS(0): SiSCtrl utility interface is disabled
(==) SIS(0): DRI disabled
(II) SIS(0): Xv: Chroma key is of same format as video source
(--) SIS(0): DIMM0 is DDR SDRAM
(--) SIS(0): DIMM1 is not installed
(--) SIS(0): DIMM2 is not installed
(--) SIS(0): DIMM3 is not installed
(--) SIS(0): DRAM type: DDR SDRAM
(--) SIS(0): Memory clock: 166.446 MHz
(--) SIS(0): DRAM bus width: 64 bit
(--) SIS(0): Linear framebuffer at 0xD8000000
(--) SIS(0): MMIO registers at 0xE0000000 (size 128K)
(--) SIS(0): VideoRAM: 32768 KB
(II) SIS(0): Using 32192K of framebuffer memory
(--) SIS(0): SiS650 revision ID e0 (651)
(--) SIS(0): Hardware supports two video overlays
(II) SIS(0): CRT1 gamma correction is enabled
(II) SIS(0): Separate Xv gamma correction for CRT1 is disabled
(--) SIS(0): Memory bandwidth at 32 bpp is 665.784 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(--) SIS(0): CRT1 DDC supported
(--) SIS(0): CRT1 DDC level: 2
(--) SIS(0): CRT1 DDC monitor info: ************************************
(II) SIS(0): Manufacturer: BNQ Model: 206 Serial#: 569
(II) SIS(0): Year: 2003 Week: 50
(II) SIS(0): EDID Version: 1.3
(II) SIS(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) SIS(0): Sync: Separate
(II) SIS(0): Max H-Image Size [cm]: horiz.: 31 vert.: 23
(II) SIS(0): Gamma: 2.80
(II) SIS(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) SIS(0): First detailed timing is preferred mode
(II) SIS(0): redX: 0.631 redY: 0.328 greenX: 0.275 greenY: 0.600
(II) SIS(0): blueX: 0.143 blueY: 0.057 whiteX: 0.280 whiteY: 0.311
(II) SIS(0): Supported VESA Video Modes:
(II) SIS(0): [EMAIL PROTECTED]
(II) SIS(0): [EMAIL PROTECTED]
(II) SIS(0): [EMAIL PROTECTED]
(II) SIS(0): [EMAIL PROTECTED]
(II) SIS(0): [EMAIL PROTECTED]
(II) SIS(0): [EMAIL PROTECTED]
(II) SIS(0): [EMAIL PROTECTED]
(II) SIS(0): [EMAIL PROTECTED]
(II) SIS(0): [EMAIL PROTECTED]
(II) SIS(0): [EMAIL PROTECTED]
(II) SIS(0): [EMAIL PROTECTED]
(II) SIS(0): Manufacturer's mask: 0
(II) SIS(0): Supported Future Video Modes:
(II) SIS(0): #0: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) SIS(0): #1: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) SIS(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) SIS(0): Supported additional Video Mode:
(II) SIS(0): clock: 94.5 MHz Image Size: 310 x 230 mm
(II) SIS(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376
h_border: 0
(II) SIS(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808
v_border: 0
(II) SIS(0): Monitor name: BENQ V773
(II) SIS(0): Serial No: 00569
(II) SIS(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 72 kHz,
PixClock max 110 MHz
(--) SIS(0): End of CRT1 DDC monitor info ******************************
(==) SIS(0): Min pixel clock is 12 MHz
(--) SIS(0): Max pixel clock is 340 MHz
(II) SIS(0): Replaced entire mode list with built-in modes
(II) SIS(0): "Unknown reason" in the following list means that the mode
(II) SIS(0): is not supported on the chipset/bridge/current output device.
(II) SIS(0): Generic Monitor: Using hsync range of 30.00-72.00 kHz
(II) SIS(0): Generic Monitor: Using vrefresh range of 50.00-120.00 Hz
(II) SIS(0): Clock range: 12.00 to 340.00 MHz
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (hsync out of range)
(II) SIS(0): Not using default mode "2048x1536" (hsync out of range)
(II) SIS(0): Not using default mode "2048x1536" (hsync out of range)
(II) SIS(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1280x720" (hsync out of range)
(II) SIS(0): Not using default mode "1280x720" (hsync out of range)
(II) SIS(0): Not using default mode "1280x960" (hsync out of range)
(WW) (1400x1050,Generic Monitor) mode clock 122.896MHz exceeds DDC maximum
110MHz
(II) SIS(0): Not using default mode "1400x1050" (hsync out of range)
(II) SIS(0): Not using default mode "1152x864" (hsync out of range)
(WW) (1680x1050,Generic Monitor) mode clock 147.084MHz exceeds DDC maximum
110MHz
(II) SIS(0): Not using default mode "1680x1050" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1400x1050" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x1024" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x1024" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x960" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1360x768" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x800" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x768" (width too large for virtual
size)
(II) SIS(0): Not using default mode "1280x720" (width too large for virtual
size)
(--) SIS(0): Virtual size is 1152x864 (pitch 1152)
(**) SIS(0): *Default mode "1152x864": 107.9 MHz, 67.4 kHz, 74.9 Hz
(II) SIS(0): Modeline "1152x864" 107.86 1152 1216 1344 1600 864 865 868 900
+hsync +vsync
(**) SIS(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) SIS(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808
+hsync +vsync
(**) SIS(0): *Default mode "800x600": 68.2 MHz, 63.6 kHz, 100.0 Hz
(II) SIS(0): Modeline "800x600" 68.18 800 848 936 1072 600 601 604 636
+hsync +vsync
(**) SIS(0): *Default mode "640x480": 52.4 MHz, 61.7 kHz, 119.9 Hz
(II) SIS(0): Modeline "640x480" 52.35 640 680 744 848 480 481 484 515
-hsync -vsync
(**) SIS(0): Default mode "1024x768": 78.7 MHz, 60.0 kHz, 75.0 Hz
(II) SIS(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
+hsync +vsync
(**) SIS(0): Default mode "1024x768": 75.2 MHz, 56.6 kHz, 70.2 Hz
(II) SIS(0): Modeline "1024x768" 75.17 1024 1048 1184 1328 768 771 777 806
-hsync -vsync
(**) SIS(0): Default mode "1024x768": 65.1 MHz, 48.5 kHz, 60.1 Hz
(II) SIS(0): Modeline "1024x768" 65.15 1024 1048 1184 1344 768 771 777 806
-hsync -vsync
(**) SIS(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.0 Hz (I)
(II) SIS(0): Modeline "1024x768" 44.86 1024 1032 1208 1264 768 768 776 817
interlace +hsync +vsync
(**) SIS(0): Default mode "1024x576": 94.5 MHz, 69.9 kHz, 86.5 Hz
(II) SIS(0): Modeline "1024x576" 94.50 1024 1072 1168 1352 576 690 694 808
+hsync +vsync
(**) SIS(0): Default mode "1024x576": 78.7 MHz, 60.0 kHz, 75.0 Hz
(II) SIS(0): Modeline "1024x576" 78.75 1024 1040 1136 1312 576 686 690 800
+hsync +vsync
(**) SIS(0): Default mode "1024x576": 65.1 MHz, 48.5 kHz, 60.1 Hz
(II) SIS(0): Modeline "1024x576" 65.15 1024 1048 1184 1344 576 688 694 806
+hsync +vsync
(**) SIS(0): Default mode "960x600": 41.5 MHz, 37.1 kHz, 60.0 Hz
(II) SIS(0): Modeline "960x600" 41.50 960 1008 1088 1120 600 603 609 618
+hsync +vsync
(**) SIS(0): Default mode "960x540": 37.3 MHz, 33.8 kHz, 60.0 Hz
(II) SIS(0): Modeline "960x540" 37.29 960 976 1008 1104 540 543 549 563
+hsync +vsync
(**) SIS(0): Default mode "800x600": 56.2 MHz, 53.7 kHz, 85.1 Hz
(II) SIS(0): Modeline "800x600" 56.25 800 832 896 1048 600 601 604 631
+hsync +vsync
(**) SIS(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) SIS(0): Modeline "800x600" 49.52 800 816 896 1056 600 601 604 625
+hsync +vsync
(**) SIS(0): Default mode "800x600": 50.1 MHz, 48.2 kHz, 72.4 Hz
(II) SIS(0): Modeline "800x600" 50.11 800 856 976 1040 600 637 643 666
+hsync +vsync
(**) SIS(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SIS(0): Modeline "800x600" 39.97 800 840 968 1056 600 601 605 628
+hsync +vsync
(**) SIS(0): Default mode "800x600": 36.1 MHz, 35.2 kHz, 56.3 Hz
(II) SIS(0): Modeline "800x600" 36.06 800 824 896 1024 600 601 603 625
+hsync +vsync
(**) SIS(0): Default mode "768x576": 36.1 MHz, 35.2 kHz, 56.3 Hz
(II) SIS(0): Modeline "768x576" 36.06 768 824 896 1024 576 601 603 625
+hsync +vsync
(**) SIS(0): Default mode "720x576": 36.1 MHz, 35.2 kHz, 56.3 Hz
(II) SIS(0): Modeline "720x576" 36.06 720 824 896 1024 576 601 603 625
+hsync +vsync
(**) SIS(0): Default mode "856x480": 33.9 MHz, 31.7 kHz, 59.8 Hz
(II) SIS(0): Modeline "856x480" 33.94 856 872 1000 1072 480 492 495 529
-hsync -vsync
(**) SIS(0): Default mode "856x480": 33.9 MHz, 30.5 kHz, 76.7 Hz (I)
(II) SIS(0): Modeline "856x480" 33.94 856 904 1048 1112 480 672 680 797
interlace +hsync +vsync
(**) SIS(0): Default mode "848x480": 33.7 MHz, 31.0 kHz, 60.0 Hz
(II) SIS(0): Modeline "848x480" 33.75 848 864 976 1088 480 486 494 517
-hsync -vsync
(**) SIS(0): Default mode "848x480": 33.9 MHz, 30.5 kHz, 76.7 Hz (I)
(II) SIS(0): Modeline "848x480" 33.94 848 904 1048 1112 480 672 680 797
interlace +hsync +vsync
(**) SIS(0): Default mode "800x480": 56.2 MHz, 53.7 kHz, 85.2 Hz
(II) SIS(0): Modeline "800x480" 56.25 800 832 896 1048 480 554 557 630
+hsync +vsync
(**) SIS(0): Default mode "800x480": 49.5 MHz, 46.9 kHz, 75.1 Hz
(II) SIS(0): Modeline "800x480" 49.52 800 816 896 1056 480 551 554 624
+hsync +vsync
(**) SIS(0): Default mode "800x480": 39.8 MHz, 37.7 kHz, 60.0 Hz
(II) SIS(0): Modeline "800x480" 39.77 800 840 968 1056 480 552 556 628
+hsync +vsync
(**) SIS(0): Default mode "720x480": 28.3 MHz, 31.6 kHz, 61.0 Hz
(II) SIS(0): Modeline "720x480" 28.28 720 728 840 896 480 490 492 517
-hsync -vsync
(**) SIS(0): Default mode "640x480": 43.3 MHz, 51.1 kHz, 100.3 Hz
(II) SIS(0): Modeline "640x480" 43.29 640 680 744 848 480 481 484 509
-hsync -vsync
(**) SIS(0): Default mode "640x480": 36.1 MHz, 43.3 kHz, 85.1 Hz
(II) SIS(0): Modeline "640x480" 36.06 640 696 752 832 480 481 484 509
-hsync -vsync
(**) SIS(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) SIS(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500
-hsync -vsync
(**) SIS(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) SIS(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520
-hsync -vsync
(**) SIS(0): Default mode "640x480": 25.1 MHz, 31.3 kHz, 59.7 Hz
(II) SIS(0): Modeline "640x480" 25.06 640 656 752 800 480 490 492 525
-hsync -vsync
(**) SIS(0): Default mode "640x400": 25.1 MHz, 31.6 kHz, 71.6 Hz
(II) SIS(0): Modeline "640x400" 25.06 640 656 752 792 400 413 415 442
-hsync +vsync
(**) SIS(0): Default mode "512x384": 32.6 MHz, 48.5 kHz, 60.1 Hz (D)
(II) SIS(0): Modeline "512x384" 32.57 512 528 592 672 384 385 388 403
doublescan -hsync -vsync
(**) SIS(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) SIS(0): Modeline "400x300" 19.98 400 416 480 528 300 300 302 314
doublescan +hsync +vsync
(**) SIS(0): Default mode "320x240": 12.5 MHz, 31.3 kHz, 60.7 Hz (D)
(II) SIS(0): Modeline "320x240" 12.53 320 328 376 400 240 245 246 258
doublescan -hsync -vsync
(**) SIS(0): Default mode "320x200": 12.5 MHz, 31.3 kHz, 70.9 Hz (D)
(II) SIS(0): Modeline "320x200" 12.53 320 328 376 400 200 206 207 221
doublescan -hsync +vsync
(--) SIS(0): Display dimensions: (310, 230) mm
(--) SIS(0): DPI set to (94, 95)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) SIS(0): Accel enabled
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe0000000 - 0xe001ffff (0x20000) MX[B]
[1] 0 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xe0103000 - 0xe01030ff (0x100) MX[B]
[8] -1 0 0xe0102000 - 0xe0102fff (0x1000) MX[B]
[9] -1 0 0xe0101000 - 0xe0101fff (0x1000) MX[B]
[10] -1 0 0xe0100000 - 0xe0100fff (0x1000) MX[B]
[11] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[12] -1 0 0xe0000000 - 0xe001ffff (0x20000) MX[B](B)
[13] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[17] 0 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[21] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B]
[22] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[23] -1 0 0x00004000 - 0x0000400f (0x10) IX[B]
[24] -1 0 0x00001080 - 0x0000109f (0x20) IX[B]
[25] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
[26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 32768 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 6325
(II) SIS(0): VESA VBE OEM Product Rev: 1.12.06
(II) SIS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0xcc80
(==) SIS(0): Write-combining range (0xd8000000,0x2000000)
(II) SIS(0): Setting standard mode 0x2b
(II) SIS(0): RENDER acceleration enabled
(II) SIS(0): Frame Buffer From (0,0) To (1152,7152)
(II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
32 8x8 color pattern slots
(==) SIS(0): Backing store disabled
(==) SIS(0): Silken mouse enabled
(**) Option "dpms"
(**) SIS(0): DPMS enabled
(II) SIS(0): Using SiS300/315/330/340 series HW Xv
(II) SIS(0): Default Xv adaptor is Video Overlay
(WW) SIS(0): Option "UseFBDev" is not used
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 5
(**) Option "Protocol" "ImPS/2"
(**) Generic Mouse: Protocol: "ImPS/2"
(**) Option "SendCoreEvents" "true"
(**) Generic Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Generic Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Generic Mouse: ZAxisMapping: buttons 4 and 5
(**) Generic Mouse: Buttons: 5
(II) XINPUT: Adding extended input device "Generic Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) Generic Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
(II) SIS(0): SISDisplayPowerManagementSet(1)
(II) SIS(0): SISDisplayPowerManagementSet(2)
(II) SIS(0): SISDisplayPowerManagementSet(3)
(II) SIS(0): SISDisplayPowerManagementSet(0)
(II) SIS(0): Restoring by setting old mode 0x03
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) SIS(0): Setting standard mode 0x2b
(II) Generic Mouse: ps2EnableDataReporting: succeeded
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) SIS(0): SISDisplayPowerManagementSet(1)
(II) SIS(0): SISDisplayPowerManagementSet(2)
(II) SIS(0): SISDisplayPowerManagementSet(3)
(II) SIS(0): SISDisplayPowerManagementSet(0)
(II) SIS(0): SISDisplayPowerManagementSet(1)
(II) SIS(0): SISDisplayPowerManagementSet(2)
(II) SIS(0): SISDisplayPowerManagementSet(3)
(II) SIS(0): SISDisplayPowerManagementSet(0)
(II) SIS(0): SISDisplayPowerManagementSet(1)
(II) SIS(0): SISDisplayPowerManagementSet(2)
(II) SIS(0): SISDisplayPowerManagementSet(3)
(II) SIS(0): SISDisplayPowerManagementSet(0)
(II) SIS(0): SISDisplayPowerManagementSet(1)
(II) SIS(0): SISDisplayPowerManagementSet(2)
(II) SIS(0): SISDisplayPowerManagementSet(3)
(II) SIS(0): SISDisplayPowerManagementSet(0)
(II) SIS(0): SISDisplayPowerManagementSet(1)
(II) SIS(0): SISDisplayPowerManagementSet(2)
(II) SIS(0): SISDisplayPowerManagementSet(3)
(II) SIS(0): SISDisplayPowerManagementSet(0)
(II) SIS(0): SISDisplayPowerManagementSet(1)
(II) SIS(0): SISDisplayPowerManagementSet(2)
(II) SIS(0): SISDisplayPowerManagementSet(3)
(II) SIS(0): SISDisplayPowerManagementSet(0)
(II) SIS(0): Restoring by setting old mode 0x03
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 32768 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 6325
(II) SIS(0): VESA VBE OEM Product Rev: 1.12.06
(II) SIS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0xcc80
(==) SIS(0): Write-combining range (0xd8000000,0x2000000)
(II) SIS(0): Setting standard mode 0x2b
(II) SIS(0): RENDER acceleration enabled
(II) SIS(0): Frame Buffer From (0,0) To (1152,7152)
(**) SIS(0): DPMS enabled
(II) SIS(0): Using SiS300/315/330/340 series HW Xv
(II) SIS(0): Default Xv adaptor is Video Overlay
(==) RandR enabled
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) Generic Mouse: ps2EnableDataReporting: succeeded
(II) SIS(0): SISDisplayPowerManagementSet(1)
(II) SIS(0): SISDisplayPowerManagementSet(2)
(II) SIS(0): SISDisplayPowerManagementSet(3)
(II) SIS(0): SISDisplayPowerManagementSet(0)
(II) SIS(0): SISDisplayPowerManagementSet(1)
(II) SIS(0): SISDisplayPowerManagementSet(2)
(II) SIS(0): SISDisplayPowerManagementSet(3)
(II) SIS(0): SISDisplayPowerManagementSet(0)
(II) SIS(0): SISDisplayPowerManagementSet(1)
(II) SIS(0): SISDisplayPowerManagementSet(2)
(II) SIS(0): SISDisplayPowerManagementSet(3)
(II) SIS(0): SISDisplayPowerManagementSet(0)
(II) SIS(0): SISDisplayPowerManagementSet(1)
(II) SIS(0): SISDisplayPowerManagementSet(2)
(II) SIS(0): SISDisplayPowerManagementSet(3)
(II) SIS(0): SISDisplayPowerManagementSet(0)
(II) SIS(0): SISDisplayPowerManagementSet(1)
(II) SIS(0): SISDisplayPowerManagementSet(2)
(II) SIS(0): SISDisplayPowerManagementSet(3)
(II) SIS(0): SISDisplayPowerManagementSet(0)
(II) SIS(0): SISDisplayPowerManagementSet(1)
(II) SIS(0): SISDisplayPowerManagementSet(2)
(II) SIS(0): SISDisplayPowerManagementSet(3)
(II) SIS(0): SISDisplayPowerManagementSet(0)
(II) SIS(0): Restoring by setting old mode 0x03
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) SIS(0): Setting standard mode 0x2b
(II) Generic Mouse: ps2EnableDataReporting: succeeded
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) SIS(0): Restoring by setting old mode 0x03
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 32768 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 6325
(II) SIS(0): VESA VBE OEM Product Rev: 1.12.06
(II) SIS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0xcc80
(==) SIS(0): Write-combining range (0xd8000000,0x2000000)
(II) SIS(0): Setting standard mode 0x2b
(II) SIS(0): RENDER acceleration enabled
(II) SIS(0): Frame Buffer From (0,0) To (1152,7152)
(**) SIS(0): DPMS enabled
(II) SIS(0): Using SiS300/315/330/340 series HW Xv
(II) SIS(0): Default Xv adaptor is Video Overlay
(==) RandR enabled
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) Generic Mouse: ps2EnableDataReporting: succeeded
(II) SIS(0): Restoring by setting old mode 0x03
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) SIS(0): Setting standard mode 0x2b
(II) Generic Mouse: ps2EnableDataReporting: succeeded
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) SIS(0): SISDisplayPowerManagementSet(1)
(II) SIS(0): SISDisplayPowerManagementSet(0)
(II) SIS(0): Restoring by setting old mode 0x03
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) SIS(0): Setting standard mode 0x2b
(II) Generic Mouse: ps2EnableDataReporting: succeeded
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) SIS(0): SISDisplayPowerManagementSet(1)
(II) SIS(0): SISDisplayPowerManagementSet(2)
(II) SIS(0): SISDisplayPowerManagementSet(3)
(II) SIS(0): SISDisplayPowerManagementSet(0)
(II) SIS(0): Restoring by setting old mode 0x03
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) SIS(0): Setting standard mode 0x2b
(II) Generic Mouse: ps2EnableDataReporting: succeeded
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) SIS(0): Restoring by setting old mode 0x03
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) SIS(0): Setting standard mode 0x2b
(II) Generic Mouse: ps2EnableDataReporting: succeeded
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) SIS(0): SISDisplayPowerManagementSet(1)
(II) SIS(0): SISDisplayPowerManagementSet(2)
(II) SIS(0): SISDisplayPowerManagementSet(3)
(II) SIS(0): SISDisplayPowerManagementSet(0)
(II) SIS(0): Restoring by setting old mode 0x03
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) SIS(0): Setting standard mode 0x2b
(II) Generic Mouse: ps2EnableDataReporting: succeeded
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) SIS(0): Restoring by setting old mode 0x03
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) SIS(0): Setting standard mode 0x2b
(II) Generic Mouse: ps2EnableDataReporting: succeeded
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) SIS(0): Restoring by setting old mode 0x03
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) SIS(0): Setting standard mode 0x2b
(II) Generic Mouse: ps2EnableDataReporting: succeeded
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) SIS(0): Restoring by setting old mode 0x03
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.8-2-686
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Versions of packages xserver-xfree86 depends on:
ii debconf [debconf-2.0 1.4.30.13 Debian configuration management sy
ii libc6 2.3.2.ds1-21 GNU C Library: Shared libraries an
ii libgcc1 1:3.4.3-12 GCC support library
ii xserver-common 4.3.0.dfsg.1-12.0.1 files and utilities common to all
ii zlib1g 1:1.2.2-4 compression library - runtime
-- debconf information:
* xserver-xfree86/config/device/identifier: Generic Video Card
xserver-xfree86/config/monitor/screen-size: 17 inches (430 mm)
* xserver-xfree86/config/device/use_fbdev: false
* xserver-xfree86/config/monitor/selection-method: Advanced
xserver-xfree86/config/doublequote_in_string_error:
shared/default-x-server: xserver-xfree86
* xserver-xfree86/config/inputdevice/mouse/emulate3buttons: true
* xserver-xfree86/config/device/bus_id:
* xserver-xfree86/config/inputdevice/keyboard/layout: us
* xserver-xfree86/config/monitor/horiz-sync: 30-72
* xserver-xfree86/config/monitor/identifier: Generic Monitor
shared/no_known_x-server:
* xserver-xfree86/autodetect_mouse: false
* xserver-xfree86/config/device/video_ram:
xserver-xfree86/config/monitor/mode-list: 1280x960 @ 60Hz
* xserver-xfree86/config/monitor/lcd: false
xserver-xfree86/config/inputdevice/keyboard/internal:
xserver-xfree86/clobber_XF86Config-4:
* xserver-xfree86/config/inputdevice/keyboard/rules: xfree86
xserver-xfree86/multiple_possible_x-drivers:
* xserver-xfree86/config/inputdevice/keyboard/model: pc104
* xserver-xfree86/config/write_dri_section: true
* xserver-xfree86/config/device/driver: sis
* xserver-xfree86/config/monitor/vert-refresh: 50-120
* xserver-xfree86/config/display/default_depth: 24
* xserver-xfree86/config/inputdevice/mouse/zaxismapping: true
* xserver-xfree86/config/display/modes: 1152x864, 1024x768, 800x600, 640x480
xserver-xfree86/config/inputdevice/mouse/retry_detection:
xserver-xfree86/config/device/bus_id_error:
* xserver-xfree86/config/modules: GLcore, bitmap, dbe, ddc, dri, extmod,
freetype, glx, int10, record, speedo, type1, vbe
* xserver-xfree86/config/inputdevice/keyboard/options:
xserver-xfree86/config/nonnumeric_string_error:
* xserver-xfree86/config/inputdevice/mouse/protocol: ImPS/2
shared/multiple_possible_x-servers:
xserver-xfree86/config/null_string_error:
xserver-xfree86/config/monitor/range_input_error:
xserver-xfree86/autodetect_video_card: true
* xserver-xfree86/config/inputdevice/keyboard/variant:
* xserver-xfree86/config/inputdevice/mouse/port: /dev/psaux
* xserver-xfree86/config/write_files_section: true
* xserver-xfree86/autodetect_monitor: false
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
