Your message dated Sun, 30 Dec 2007 12:02:32 -0430
with message-id <[EMAIL PROTECTED]>
and subject line Bug#458354: motion: Motion doesn't run.
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: motion
Version: 3.2.9-1
Severity: grave
Justification: renders package unusable
Motion doesn't run, impossible executing it.
See the terminal output:
**************************************************************
[EMAIL PROTECTED]:~/amsn-0.97$ motion
[0] Processing thread 0 - config file /etc/motion/motion.conf
[0] Motion 3.2.9 Started
[0] ffmpeg LIBAVCODEC_BUILD 3352064 LIBAVFORMAT_BUILD 3344896
[0] Thread 1 is from /etc/motion/motion.conf
[1] Thread 1 started
[1] cap.driver: "bttv"
[1] cap.card: "BT878 video (AVerMedia TVCaptur"
[1] cap.bus_info: "PCI:0000:00:0a.0"
[1] cap.capabilities=0x05010015
[1] - VIDEO_CAPTURE
[1] - VIDEO_OVERLAY
[1] - VBI_CAPTURE
[1] - TUNER
[1] - READWRITE
[1] - STREAMING
[1] Supported palettes:
[1] 0: GREY (8 bpp, gray)
[1] 1: HI24 (8 bpp, dithered color)
[1] 2: RGBO (15 bpp RGB, le)
[1] 3: RGBQ (15 bpp RGB, be)
[1] 4: RGBP (16 bpp RGB, le)
[1] 5: RGBR (16 bpp RGB, be)
[1] 6: BGR3 (24 bpp RGB, le)
[1] 7: BGR4 (32 bpp RGB, le)
[1] 8: RGB4 (32 bpp RGB, be)
[1] 9: YUYV (4:2:2, packed, YUYV)
[1] 10: YUYV (4:2:2, packed, YUYV)
[1] 11: UYVY (4:2:2, packed, UYVY)
[1] 12: 422P (4:2:2, planar, Y-Cb-Cr)
[1] 13: YU12 (4:2:0, planar, Y-Cb-Cr)
[1] 14: YV12 (4:2:0, planar, Y-Cr-Cb)
[1] 15: 411P (4:1:1, planar, Y-Cb-Cr)
[1] 16: YUV9 (4:1:0, planar, Y-Cb-Cr)
[1] 17: YVU9 (4:1:0, planar, Y-Cr-Cb)
[1] Test palette YU12 (320x240)
[1] Using palette YU12 (320x240) bytesperlines 320 sizeimage 115200 colorspace
00000000
[1] found control 0x00980900, "Brightness", range 0,65535
[1] "Brightness", default 32768, current 32768
[1] found control 0x00980901, "Contrast", range 0,65535
[1] "Contrast", default 32768, current 32768
[1] found control 0x00980902, "Saturation", range 0,65535
[1] "Saturation", default 32768, current 32768
[1] found control 0x00980903, "Hue", range 0,65535
[1] "Hue", default 32768, current 32768
[1] found control 0x00000000, "42", range 0,0 !DISABLED!
[1] "42", default 0, current 32768
[1] found control 0x00000000, "42", range 0,0 !DISABLED!
[1] "42", default 0, current 32768
[1] found control 0x00000000, "42", range 0,0 !DISABLED!
[1] "42", default 0, current 32768
[1] found control 0x00000000, "42", range 0,0 !DISABLED!
[1] "42", default 0, current 32768
[1] found control 0x00000000, "42", range 0,0 !DISABLED!
[1] "42", default 0, current 32768
[1] found control 0x00000000, "42", range 0,0 !DISABLED!
[1] "42", default 0, current 32768
[1] found control 0x08000000, "chroma agc", range 0,1
[1] "chroma agc", default 0, current 0
[1] found control 0x08000001, "combfilter", range 0,1
[1] "combfilter", default 0, current 0
[1] mmap information:
[1] frames=4
[1] 0 length=118784
[1] 1 length=118784
[1] 2 length=118784
[1] 3 length=118784
[1] VIDIOC_QBUF: Device or resource busy
[1] ioctl(VIDIOCGMBUF) - Error device does not support memory map
[1] V4L capturing using read is deprecated!
[1] Motion only supports mmap.
[1] Capture error calling vid_start
[1] Thread finishing...
*******************************************************************
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.24-2-generic (SMP w/1 CPU core)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages motion depends on:
ii adduser 3.105 add and remove users and groups
ii debconf [debconf-2.0] 1.5.17 Debian configuration management sy
ii libavcodec1d 0.cvs20070307-6 ffmpeg codec library
ii libavformat1d 0.cvs20070307-6 ffmpeg file format library
ii libavutil1d 0.cvs20070307-6 ffmpeg utility library
ii libc6 2.7-4 GNU C Library: Shared libraries
ii libjpeg62 6b-14 The Independent JPEG Group's JPEG
ii libmysqlclient15off 5.0.45-5 MySQL database client library
ii libpq5 8.2.5-4 PostgreSQL C client library
Versions of packages motion recommends:
pn ffmpeg <none> (no description available)
-- debconf information:
motion/moved_conf_dir:
--- End Message ---
--- Begin Message ---
Hi,
This is not a bug, is that the device is being used by another
application as described:
[1] VIDIOC_QBUF: Device or resource busy
I have AverMedia TV capture, this is my dump:
[0] Processing thread 0 - config file /etc/motion/motion.conf
[0] Motion 3.2.9 Started
[0] ffmpeg LIBAVCODEC_BUILD 3352064 LIBAVFORMAT_BUILD 3344896
[0] Thread 1 is from /etc/motion/motion.conf
[1] Thread 1 started
[1] cap.driver: "bttv"
[1] cap.card: "BT878 video (AVerMedia TVCaptur"
[1] cap.bus_info: "PCI:0000:00:0b.0"
[1] cap.capabilities=0x05010015
[1] - VIDEO_CAPTURE
[1] - VIDEO_OVERLAY
[1] - VBI_CAPTURE
[1] - TUNER
[1] - READWRITE
[1] - STREAMING
[1] Supported palettes:
[1] 0: GREY (8 bpp, gray)
[1] 1: HI24 (8 bpp, dithered color)
[1] 2: RGBO (15 bpp RGB, le)
[1] 3: RGBQ (15 bpp RGB, be)
[1] 4: RGBP (16 bpp RGB, le)
[1] 5: RGBR (16 bpp RGB, be)
[1] 6: BGR3 (24 bpp RGB, le)
[1] 7: BGR4 (32 bpp RGB, le)
[1] 8: RGB4 (32 bpp RGB, be)
[1] 9: YUYV (4:2:2, packed, YUYV)
[1] 10: YUYV (4:2:2, packed, YUYV)
[1] 11: UYVY (4:2:2, packed, UYVY)
[1] 12: 422P (4:2:2, planar, Y-Cb-Cr)
[1] 13: YU12 (4:2:0, planar, Y-Cb-Cr)
[1] 14: YV12 (4:2:0, planar, Y-Cr-Cb)
[1] 15: 411P (4:1:1, planar, Y-Cb-Cr)
[1] 16: YUV9 (4:1:0, planar, Y-Cb-Cr)
[1] 17: YVU9 (4:1:0, planar, Y-Cr-Cb)
[1] Test palette YU12 (320x240)
[1] Using palette YU12 (320x240) bytesperlines 320 sizeimage 115200
colorspace 00000000
[1] found control 0x00980900, "Brightness", range 0,65535
[1] "Brightness", default 32768, current 32768
[1] found control 0x00980901, "Contrast", range 0,65535
[1] "Contrast", default 32768, current 32768
[1] found control 0x00980902, "Saturation", range 0,65535
[1] "Saturation", default 32768, current 32768
[1] found control 0x00980903, "Hue", range 0,65535
[1] "Hue", default 32768, current 32768
[1] found control 0x08000000, "chroma agc", range 0,1
[1] "chroma agc", default 0, current 0
[1] found control 0x08000001, "combfilter", range 0,1
[1] "combfilter", default 0, current 0
[1] mmap information:
[1] frames=4
[1] 0 length=118784
[1] 1 length=118784
[1] 2 length=118784
[1] 3 length=118784
[0] motion-httpd/3.2.9 running, accepting connections
[0] motion-httpd: waiting for data on port TCP 8080
[1] Started stream webcam server in port 8081
Please check that some other application (tvtime, xawtv, etc.) is not
using the device.
EagleScreen escribió:
Package: motion
Version: 3.2.9-1
Severity: grave
Justification: renders package unusable
Motion doesn't run, impossible executing it.
See the terminal output:
**************************************************************
[EMAIL PROTECTED]:~/amsn-0.97$ motion
[0] Processing thread 0 - config file /etc/motion/motion.conf
[0] Motion 3.2.9 Started
[0] ffmpeg LIBAVCODEC_BUILD 3352064 LIBAVFORMAT_BUILD 3344896
[0] Thread 1 is from /etc/motion/motion.conf
[1] Thread 1 started
[1] cap.driver: "bttv"
[1] cap.card: "BT878 video (AVerMedia TVCaptur"
[1] cap.bus_info: "PCI:0000:00:0a.0"
[1] cap.capabilities=0x05010015
[1] - VIDEO_CAPTURE
[1] - VIDEO_OVERLAY
[1] - VBI_CAPTURE
[1] - TUNER
[1] - READWRITE
[1] - STREAMING
[1] Supported palettes:
[1] 0: GREY (8 bpp, gray)
[1] 1: HI24 (8 bpp, dithered color)
[1] 2: RGBO (15 bpp RGB, le)
[1] 3: RGBQ (15 bpp RGB, be)
[1] 4: RGBP (16 bpp RGB, le)
[1] 5: RGBR (16 bpp RGB, be)
[1] 6: BGR3 (24 bpp RGB, le)
[1] 7: BGR4 (32 bpp RGB, le)
[1] 8: RGB4 (32 bpp RGB, be)
[1] 9: YUYV (4:2:2, packed, YUYV)
[1] 10: YUYV (4:2:2, packed, YUYV)
[1] 11: UYVY (4:2:2, packed, UYVY)
[1] 12: 422P (4:2:2, planar, Y-Cb-Cr)
[1] 13: YU12 (4:2:0, planar, Y-Cb-Cr)
[1] 14: YV12 (4:2:0, planar, Y-Cr-Cb)
[1] 15: 411P (4:1:1, planar, Y-Cb-Cr)
[1] 16: YUV9 (4:1:0, planar, Y-Cb-Cr)
[1] 17: YVU9 (4:1:0, planar, Y-Cr-Cb)
[1] Test palette YU12 (320x240)
[1] Using palette YU12 (320x240) bytesperlines 320 sizeimage 115200 colorspace
00000000
[1] found control 0x00980900, "Brightness", range 0,65535
[1] "Brightness", default 32768, current 32768
[1] found control 0x00980901, "Contrast", range 0,65535
[1] "Contrast", default 32768, current 32768
[1] found control 0x00980902, "Saturation", range 0,65535
[1] "Saturation", default 32768, current 32768
[1] found control 0x00980903, "Hue", range 0,65535
[1] "Hue", default 32768, current 32768
[1] found control 0x00000000, "42", range 0,0 !DISABLED!
[1] "42", default 0, current 32768
[1] found control 0x00000000, "42", range 0,0 !DISABLED!
[1] "42", default 0, current 32768
[1] found control 0x00000000, "42", range 0,0 !DISABLED!
[1] "42", default 0, current 32768
[1] found control 0x00000000, "42", range 0,0 !DISABLED!
[1] "42", default 0, current 32768
[1] found control 0x00000000, "42", range 0,0 !DISABLED!
[1] "42", default 0, current 32768
[1] found control 0x00000000, "42", range 0,0 !DISABLED!
[1] "42", default 0, current 32768
[1] found control 0x08000000, "chroma agc", range 0,1
[1] "chroma agc", default 0, current 0
[1] found control 0x08000001, "combfilter", range 0,1
[1] "combfilter", default 0, current 0
[1] mmap information:
[1] frames=4
[1] 0 length=118784
[1] 1 length=118784
[1] 2 length=118784
[1] 3 length=118784
[1] VIDIOC_QBUF: Device or resource busy
[1] ioctl(VIDIOCGMBUF) - Error device does not support memory map
[1] V4L capturing using read is deprecated!
[1] Motion only supports mmap.
[1] Capture error calling vid_start
[1] Thread finishing...
*******************************************************************
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.24-2-generic (SMP w/1 CPU core)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages motion depends on:
ii adduser 3.105 add and remove users and groups
ii debconf [debconf-2.0] 1.5.17 Debian configuration management sy
ii libavcodec1d 0.cvs20070307-6 ffmpeg codec library
ii libavformat1d 0.cvs20070307-6 ffmpeg file format library
ii libavutil1d 0.cvs20070307-6 ffmpeg utility library
ii libc6 2.7-4 GNU C Library: Shared libraries
ii libjpeg62 6b-14 The Independent JPEG Group's JPEG
ii libmysqlclient15off 5.0.45-5 MySQL database client library
ii libpq5 8.2.5-4 PostgreSQL C client library
Versions of packages motion recommends:
pn ffmpeg <none> (no description available)
-- debconf information:
motion/moved_conf_dir:
--- End Message ---
