Hi,
I do find similar problem with the latest 2.6.21.3 (i686 image) kernel in Sid.
What is peculiar is that the kernel tries to access the card both as
'/dev/sda' and '/dev/sdb' simultaneously, as the 'dmesg' shows. 'udev'
does create '/dev/sda1', but access to '/dev/sdb' throws a bunch of
Error messages with the final one being 'failure to read the partition
table' (this is probably expected as the card is already accessed as
'/dev/sda').
I can mount the card and copy an image file from hard disk successfully
to it (can be viewed in the camera LCD screen). Successive
mounting of the card in the laptop (Acer Aspire 1524) shows 'md5sum' of
that file to be different than the original file. Displaying it in the
machine also fails. However, I noticed that the actual file on the card
remained fine (viewable on the camera LCD). Therefore, it appears
that the problem is in 'reading' the contents of the card (the way
kernel access the card seems incorrect).
I checked the same behaviour with the earlier 2.6.18 kernel in Etch.
I need to correct the earlier statement of data corruption.
That was made due to different 'md5sum' for the same file on the hard
disk and on the card (unmounted after copy and then mounted).
However, as the file (jpg image) is viewable on the camera LCD, it is
unlikely that there is any data corruption. It could be a problem in
reading or accessing the card.
I have attached the 'dmesg' output from the machine.
On Wed, 23 May 2007, dann frazier wrote:
hey Subhashis,
Can you attempt to reproduce this bug with the 2.6.21 kernel in sid?
It would be good to know if this still exists in recent kernels before
forwarding this upstream. If you can reproduce, please include the
entire output of 'dmesg' in your follow-up.
--
dann frazier
Linux version 2.6.21-1-686 (Debian 2.6.21-3) ([EMAIL PROTECTED]) (gcc version
4.1.3 20070518 (prerelease) (Debian 4.1.2-8)) #1 SMP Fri May 25 13:06:47 UTC
2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009f800 end:
000000000009f800 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009f800 size: 0000000000000800 end:
00000000000a0000 type: 2
copy_e820_map() start: 00000000000d8000 size: 0000000000028000 end:
0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000001fe70000 end:
000000001ff70000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000001ff70000 size: 000000000000a000 end:
000000001ff7a000 type: 3
copy_e820_map() start: 000000001ff7a000 size: 0000000000006000 end:
000000001ff80000 type: 4
copy_e820_map() start: 000000001ff80000 size: 0000000000080000 end:
0000000020000000 type: 2
copy_e820_map() start: 00000000fffe0000 size: 0000000000020000 end:
0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
BIOS-e820: 000000001ff70000 - 000000001ff7a000 (ACPI data)
BIOS-e820: 000000001ff7a000 - 000000001ff80000 (ACPI NVS)
BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000f6910
Entering add_active_range(0, 0, 130928) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 130928
HighMem 130928 -> 130928
early_node_map[1] active PFN ranges
0: 0 -> 130928
On node 0 totalpages: 130928
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 990 pages used for memmap
Normal zone: 125842 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F6A60, 0014 (r0 PTLTD )
ACPI: RSDT 1FF73BB5, 0030 (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 1FF79E35, 0084 (r2 AMDK8 PTLTW 6040000 PTL_ F4240)
ACPI: DSDT 1FF73BE5, 6250 (r1 VIA PTL_ACPI 6040000 MSFT 100000E)
ACPI: FACS 1FF7AFC0, 0040
ACPI: SSDT 1FF79EB9, 00F7 (r1 PTLTD POWERNOW 6040000 LTP 1)
ACPI: APIC 1FF79FB0, 0050 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:dffe0000)
Built 1 zonelists. Total pages: 129906
Kernel command line: ro root=/dev/hda2 nmi_watchdog=0 resume=/dev/hda7 irqpoll
single
Misrouted IRQ fixup and polling support enabled
This may significantly impact system performance
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 2201.389 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 508612k/523712k available (1661k kernel code, 14496k reserved, 637k
data, 212k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xdff70000 ( 511 MB)
.init : 0xc0345000 - 0xc037a000 ( 212 kB)
.data : 0xc029f405 - 0xc033e834 ( 637 kB)
.text : 0xc0100000 - 0xc029f405 (1661 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4412.80 BogoMIPS (lpj=8825619)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000
00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
ACPI: Core revision 20070126
CPU0: AMD Athlon(tm) 64 Processor 3400+ stepping 0a
Total of 1 processors activated (4412.80 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
Brought up 1 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd557, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 4000-407f claimed by vt8235 PM
PCI quirk: region 8100-810f claimed by vt8235 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *10, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *10, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *11, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *11, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 12 14 15) *10
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
pnp: 00:05: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:05: iomem range 0xfff00000-0xffffffff could not be reserved
pnp: 00:05: iomem range 0xffee0000-0xffefffff has been reserved
pnp: 00:05: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:06: ioport range 0x600-0x60f has been reserved
pnp: 00:06: ioport range 0x1c0-0x1cf has been reserved
pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:06: ioport range 0xfe10-0xfe11 has been reserved
pnp: 00:06: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:06: iomem range 0xfee00000-0xfee00fff has been reserved
Time: tsc clocksource has been installed.
PCI: Failed to allocate mem resource #6:[EMAIL PROTECTED] for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: c1000000-c1ffffff
PREFETCH window: e0000000-efffffff
PCI: Bus 2, cardbus bridge: 0000:00:0b.0
IO window: 00002000-000020ff
IO window: 00002400-000024ff
PREFETCH window: 30000000-33ffffff
MEM window: 34000000-37ffffff
PCI: Bus 6, cardbus bridge: 0000:00:0b.1
IO window: 00002800-000028ff
IO window: 00002c00-00002cff
PREFETCH window: 38000000-3bffffff
MEM window: 3c000000-3fffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Enabling device 0000:00:0b.1 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:0b.1[B] -> GSI 18 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:0b.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 196608 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs... it is
Switched to high resolution mode on CPU 0
Freeing initrd memory: 7081k freed
audit: initializing netlink socket (disabled)
audit(1180260234.680:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 212k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: Thermal Zone [THRS] (38 C)
ACPI: Thermal Zone [THRC] (58 C)
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 22 (level, low) -> IRQ 18
eth0: RTL8169sb/8110sb at 0xe083c400, 00:0a:e4:a2:ae:31, IRQ 18
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 19
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 19, io base 0x00001c20
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 19
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 19, io base 0x00001c40
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 19
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 19, io base 0x00001c60
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 19
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: irq 19, io mem 0xc0006800
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 1-1: new low speed USB device using uhci_hcd and address 2
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: Unable to derive IRQ for device 0000:00:11.1
ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0x1c80-0x1c87, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1c88-0x1c8f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC25N080ATMR04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
usb 1-1: new low speed USB device using uhci_hcd and address 3
usb 1-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: CHESEN PS2 to USB Converter as /class/input/input1
input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on
usb-0000:00:10.0-1
input: CHESEN PS2 to USB Converter as /class/input/input2
input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:10.0-1
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
hdc: TSSTcorpCD/DVDW TS-L532A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
SCSI subsystem initialized
libata version 2.20 loaded.
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Real Time Clock Driver v1.12ac
input: PC Speaker as /class/input/input3
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
Yenta: CardBus bridge found at 0000:00:0b.0 [1025:006e]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0b.0, mfunc 0x010a1b22, devctl 0x64
irda_init()
NET: Registered protocol family 23
Yenta: ISA IRQ mask 0x0c78, PCI irq 16
Socket status: 30000006
Yenta: CardBus bridge found at 0000:00:0b.1 [1025:006e]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0b.1, mfunc 0x010a1b22, devctl 0x64
Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps: 0x904713/0x4000
input: SynPS/2 Synaptics TouchPad as /class/input/input4
nsc_ircc_pnp_probe() : From PnP, found firbase 0x3F8 ; irq 3 ; dma 1.
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x3f8
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x3f8
pnp: Device 00:0a disabled.
Yenta: ISA IRQ mask 0x0c70, PCI irq 17
Socket status: 30000006
Via 686a/8233/8235 audio driver 1.9.1-ac4-2.5
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 18
via82cxxx: Six channel audio available
PCI: Setting latency timer of device 0000:00:11.5 to 64
ac97_codec: AC97 Audio codec, id: VIA97 (Unknown)
via82cxxx: board #1 at 0x1400, IRQ 18
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
can't register device seq
Adding 554232k swap on /dev/hda7. Priority:-1 extents:1 across:554232k
EXT3 FS on hda2, internal journal
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED]
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ip_tables: (C) 2000-2006 Netfilter Core Team
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
#-------------------------
#the Card is inserted
#-------------------------
pccard: PCMCIA card inserted into slot 1
cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia: registering new device pcmcia1.0
ata1: PATA max PIO0 cmd 0x00010100 ctl 0x0001010e bmdma 0x00000000 irq 4
scsi0 : pata_pcmcia
ata1.00: CFA: Memory Card Adapter, 20030623, max PIO1
ata1.00: 990976 sectors, multi 0: LBA
ata1.01: CFA: Memory Card Adapter, 20030623, max PIO1
ata1.01: 990976 sectors, multi 0: LBA
ata1.00: configured for PIO0
ata1.01: configured for PIO0
scsi 0:0:0:0: Direct-Access ATA Memory Card Adap 2003 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA Memory Card Adap 2003 PQ: 0 ANSI: 5
SCSI device sda: 990976 512-byte hdwr sectors (507 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: disabled, read cache: enabled, doesn't support
DPO or FUA
SCSI device sda: 990976 512-byte hdwr sectors (507 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: disabled, read cache: enabled, doesn't support
DPO or FUA
sda: sda1
sd 0:0:0:0: Attached scsi removable disk sda
SCSI device sdb: 990976 512-byte hdwr sectors (507 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support
DPO or FUA
SCSI device sdb: 990976 512-byte hdwr sectors (507 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support
DPO or FUA
sdb:<3>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
SCSI device sda: 990976 512-byte hdwr sectors (507 MB)
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
SCSI device sda: write cache: disabled, read cache: enabled, doesn't support
DPO or FUA
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
sd 0:0:1:0: SCSI error: return code = 0x08000002
sdb: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
sd 0:0:1:0: SCSI error: return code = 0x08000002
sdb: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata1: EH complete
SCSI device sdb: 990976 512-byte hdwr sectors (507 MB)
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
sd 0:0:1:0: SCSI error: return code = 0x08000002
sdb: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata1: EH complete
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
sd 0:0:1:0: SCSI error: return code = 0x08000002
sdb: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
sd 0:0:1:0: SCSI error: return code = 0x08000002
sdb: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata1: EH complete
ldm_validate_partition_table(): Disk read failed.
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support
DPO or FUA
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
SCSI device sda: 990976 512-byte hdwr sectors (507 MB)
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
SCSI device sda: write cache: disabled, read cache: enabled, doesn't support
DPO or FUA
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
sd 0:0:1:0: SCSI error: return code = 0x08000002
sdb: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
sd 0:0:1:0: SCSI error: return code = 0x08000002
sdb: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata1: EH complete
SCSI device sdb: 990976 512-byte hdwr sectors (507 MB)
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
sd 0:0:1:0: SCSI error: return code = 0x08000002
sdb: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata1: EH complete
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
sd 0:0:1:0: SCSI error: return code = 0x08000002
sdb: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata1: EH complete
Dev sdb: unable to read RDB block 0
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
ata1: EH complete
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:00:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
ata1.00: configured for PIO0
ata1.01: configured for PIO0
#-----------------------------------------
#More repeatative error messages are deleted.
#-----------------------------------------
ata1: EH complete
sd 0:0:1:0: SCSI error: return code = 0x08000002
sdb: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata1: EH complete
unable to read partition table
sd 0:0:1:0: Attached scsi removable disk sdb
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support
DPO or FUA
SCSI device sda: 990976 512-byte hdwr sectors (507 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: disabled, read cache: enabled, doesn't support
DPO or FUA
SCSI device sdb: 990976 512-byte hdwr sectors (507 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support
DPO or FUA
