On Mon, Feb 20, 2012 at 4:21 PM, Ben Hutchings <b...@decadent.org.uk> wrote:
> Please use reportbug rather than sending mail directly. It will
> gather information about your system so we don't have to ask you
> for it.
>
> Use 'reportbug -N 660652' to add this information now.
>
> Ben.
>
> --
> Ben Hutchings
> We get into the habit of living before acquiring the habit of thinking.
> - Albert Camus
Here it goes.
-- Package-specific info:
** Version:
Linux version 3.2.0-1-amd64 (Debian 3.2.4-1) (wa...@debian.org) (gcc
version 4.6.2 (Debian 4.6.2-12) ) #1 SMP Sun Feb 5 15:17:15 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-amd64
root=UUID=f00c158f-63f4-40d4-b916-2fceaa79a7f7 ro quiet splash
** Not tainted
** Kernel log:
[ 9.397115] udevd[337]: starting version 175
[ 10.501767] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 10.823458] applesmc:
TB2Ts&ie\x01\xffffff88\xffffffff\xffffffffE\x01: read arg fail
[ 10.849706] ACPI: AC Adapter [ADP1] (off-line)
[ 10.957304] applesmc: key=370 fan=1 temp=22 acc=1 lux=2 kbd=1
[ 10.957307] applesmc: init_smcreg() took 50 ms
[ 11.018599] ACPI: Battery Slot [BAT0] (battery present)
[ 11.030645] input: applesmc as /devices/platform/applesmc.768/input/input9
[ 11.030747] Registered led device: smc::kbd_backlight
[ 11.054440] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level,
low) -> IRQ 18
[ 11.054447] ACPI: resource 0000:00:1f.3 [io 0xefa0-0xefbf]
conflicts with ACPI region SMBI [io 0xefa0-0xefaf]
[ 11.054450] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
[ 11.123583] iTCO_vendor_support: vendor-support=0
[ 11.174044] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 11.174127] iTCO_wdt: unable to reset NO_REBOOT flag, device
disabled by hardware/BIOS
[ 11.194990] bcma-pci-bridge 0000:03:00.0: PCI INT A -> GSI 17
(level, low) -> IRQ 17
[ 11.195006] bcma-pci-bridge 0000:03:00.0: setting latency timer to 64
[ 11.195076] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800,
rev 0x25, class 0x0)
[ 11.195104] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812,
rev 0x1D, class 0x0)
[ 11.195166] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev
0x13, class 0x0)
[ 11.195311] bcma: PMU resource config unknown for device 0x4331
[ 11.264689] bcma: Bus registered
[ 11.410419] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[ 11.410474] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 11.410502] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 11.780623] Bluetooth: Core ver 2.16
[ 11.780637] NET: Registered protocol family 31
[ 11.780639] Bluetooth: HCI device and connection manager initialized
[ 11.780641] Bluetooth: HCI socket layer initialized
[ 11.780643] Bluetooth: L2CAP socket layer initialized
[ 11.780647] Bluetooth: SCO socket layer initialized
[ 11.799440] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 11.799636] usbcore: registered new interface driver btusb
[ 11.878262] Linux media interface: v0.10
[ 11.883746] usb 1-1.1.1: USB disconnect, device number 6
[ 11.918878] input: bcm5974 as
/devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2:1.2/input/input10
[ 11.956121] usbcore: registered new interface driver bcm5974
[ 11.972173] Linux video capture interface: v2.00
[ 12.020622] uvcvideo: Found UVC 1.00 device FaceTime HD Camera
(Built-in) (05ac:8509)
[ 12.027623] input: FaceTime HD Camera (Built-in) as
/devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input11
[ 12.027687] usbcore: registered new interface driver uvcvideo
[ 12.027689] USB Video Class driver (1.1.1)
[ 12.108431] usb 1-1.1.2: USB disconnect, device number 7
[ 12.179010] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 12.179176] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 12.179341] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 12.179502] input: HDA Intel PCH HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 12.179577] input: HDA Intel PCH HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 12.179640] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 14.173432] Adding 5761712k swap on /dev/sda6. Priority:-1
extents:1 across:5761712k
[ 14.176685] EXT4-fs (sda4): re-mounted. Opts: (null)
[ 14.553153] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[ 14.660638] loop: module loaded
[ 14.736709] cfg80211: Calling CRDA to update world regulatory domain
[ 14.970249] b43-phy0: Broadcom 4331 WLAN found (core revision 29)
[ 15.018324] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 15.018714] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 15.132714] cfg80211: World regulatory domain updated:
[ 15.132718] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 15.132723] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 15.132726] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 15.132730] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 15.132733] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 15.132737] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 15.693756] EXT4-fs (sda7): mounted filesystem with ordered data
mode. Opts: user_xattr
[ 16.582780] RPC: Registered named UNIX socket transport module.
[ 16.582784] RPC: Registered udp transport module.
[ 16.582786] RPC: Registered tcp transport module.
[ 16.582788] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 16.694804] FS-Cache: Loaded
[ 16.735855] FS-Cache: Netfs 'nfs' registered for caching
[ 16.747054] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 17.983012] fuse init (API version 7.17)
[ 21.671841] tg3 0000:02:00.0: irq 48 for MSI/MSI-X
[ 21.671848] tg3 0000:02:00.0: irq 49 for MSI/MSI-X
[ 21.671852] tg3 0000:02:00.0: irq 50 for MSI/MSI-X
[ 21.671857] tg3 0000:02:00.0: irq 51 for MSI/MSI-X
[ 21.671862] tg3 0000:02:00.0: irq 52 for MSI/MSI-X
[ 22.701197] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.470070] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 23.530750] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.263800] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input15
[ 26.853695] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 26.853698] Bluetooth: BNEP filters: protocol multicast
[ 26.908264] Bluetooth: RFCOMM TTY layer initialized
[ 26.908269] Bluetooth: RFCOMM socket layer initialized
[ 26.908270] Bluetooth: RFCOMM ver 1.11
[ 27.188125] wlan0: authenticate with 74:ea:3a:ec:e1:a0 (try 1)
[ 27.189660] wlan0: authenticated
[ 27.212127] wlan0: associate with 74:ea:3a:ec:e1:a0 (try 1)
[ 27.214479] wlan0: RX AssocResp from 74:ea:3a:ec:e1:a0 (capab=0x431
status=0 aid=1)
[ 27.214482] wlan0: associated
[ 27.215272] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 28.266365] lp: driver loaded but no devices found
[ 28.575077] ppdev: user-space parallel port driver
[ 33.597981] applesmc: light sensor data length set to 10
[ 37.878676] wlan0: no IPv6 routers present
[ 39.088753] EXT4-fs (sda7): re-mounted. Opts:
user_xattr,barrier=1,data=ordered,commit=600
[ 50.984174] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 50.984252] ehci_hcd 0000:00:1d.7: PME# enabled
** Model information
sys_vendor: Apple Inc.
product_name: MacBookPro8,1
product_version: 1.0
chassis_vendor: Apple Inc.
chassis_version: Mac-94245B3640C91C81
bios_vendor: Apple Inc.
bios_version: MBP81.88Z.0047.B24.1110141131
board_vendor: Apple Inc.
board_name: Mac-94245B3640C91C81
board_version: MacBookPro8,1
** Loaded modules:
acpi_cpufreq
mperf
cpufreq_powersave
cpufreq_userspace
cpufreq_stats
cpufreq_conservative
parport_pc
ppdev
lp
parport
rfcomm
bnep
binfmt_misc
uinput
fuse
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
coretemp
arc4
b43
mac80211
cfg80211
ssb
pcmcia
pcmcia_core
rng_core
loop
firewire_sbp2
snd_hda_codec_hdmi
snd_hda_codec_cirrus
uvcvideo
videodev
bcm5974
media
v4l2_compat_ioctl32
btusb
bluetooth
rfkill
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_seq
snd_timer
snd_seq_device
bcma
iTCO_wdt
iTCO_vendor_support
joydev
snd
i2c_i801
soundcore
snd_page_alloc
battery
apple_bl
ac
power_supply
applesmc
evdev
pcspkr
processor
input_polldev
ext4
mbcache
jbd2
crc16
sd_mod
sr_mod
cdrom
crc_t10dif
ata_generic
hid_apple
usbhid
hid
uhci_hcd
ata_piix
libata
scsi_mod
firewire_ohci
ehci_hcd
firewire_core
crc_itu_t
usbcore
i915
usb_common
tg3
sdhci_pci
sdhci
libphy
mmc_core
drm_kms_helper
drm
i2c_algo_bit
i2c_core
video
thermal_sys
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core
Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Apple Computer Inc. Device [106b:00db]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd
Generation Core Processor Family PCI Express Root Port [8086:0101]
(rev 09) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: a0800000-a08fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd
Generation Core Processor Family PCI Express Root Port [8086:0105]
(rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=05, subordinate=9b, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: a0a00000-a4efffff
Prefetchable memory behind bridge: 00000000a4f00000-00000000a8efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd
Generation Core Processor Family Integrated Graphics Controller
[8086:0126] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Apple Computer Inc. Device [106b:00db]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at a0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at 90000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6
Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev
04)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at a0907100 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series
Chipset Family USB Universal Host Controller #5 [8086:1c2c] (rev 05)
(prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 2120 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 6 Series/C200 Series
Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05)
(prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at a0906c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series
Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at a0900000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series
Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: a0700000-a07fffff
Prefetchable memory behind bridge: 00000000a0400000-00000000a04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series
Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: a0600000-a06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series
Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b5) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: a0500000-a05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series
Chipset Family USB Universal Host Controller #1 [8086:1c27] (rev 05)
(prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 20c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 6 Series/C200 Series
Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
(prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 22
Region 0: Memory at a0906800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset
Family LPC Controller [8086:1c49] (rev 05)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 6 Series/C200 Series
Chipset Family 4 port SATA IDE Controller [8086:1c01] (rev 05)
(prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 2148 [size=8]
Region 1: I/O ports at 215c [size=4]
Region 2: I/O ports at 2140 [size=8]
Region 3: I/O ports at 2158 [size=4]
Region 4: I/O ports at 2060 [size=16]
Region 5: I/O ports at ffe0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset
Family SMBus Controller [8086:1c22] (rev 05)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at a0907000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme
BCM57765 Gigabit Ethernet PCIe [14e4:16b4] (rev 10)
Subsystem: Broadcom Corporation NetXtreme BCM57765 Gigabit Ethernet
PCIe [14e4:16b4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at a0400000 (64-bit, prefetchable) [size=64K]
Region 2: Memory at a0410000 (64-bit, prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
02:00.1 SD Host controller [0805]: Broadcom Corporation NetXtreme
BCM57765 Memory Card Reader [14e4:16bc] (rev 10) (prog-if 01)
Subsystem: Broadcom Corporation Device [14e4:0000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at a0420000 (64-bit, prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
03:00.0 Network controller [0280]: Broadcom Corporation BCM4331
802.11a/b/g/n [14e4:4331] (rev 02)
Subsystem: Apple Computer Inc. AirPort Extreme [106b:00d6]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at a0600000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: bcma-pci-bridge
04:00.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW643 PCI Express
1394b Controller (PHY/Link) [11c1:5901] (rev 08) (prog-if 10 [OHCI])
Subsystem: Agere Systems Device [11c1:5900]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at a0500000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0424:2513 Standard Microsystems Corp.
Bus 001 Device 003: ID 05ac:8509 Apple, Inc. FaceTime HD Camera
Bus 002 Device 002: ID 0424:2513 Standard Microsystems Corp.
Bus 001 Device 004: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub
(part of BCM2046 Bluetooth)
Bus 001 Device 005: ID 05ac:0252 Apple, Inc. Internal Keyboard/Trackpad (ANSI)
Bus 002 Device 003: ID 05ac:8242 Apple, Inc. IR Receiver [built-in]
Bus 001 Device 008: ID 05ac:821a Apple, Inc. Bluetooth Host Controller
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.4
ii module-init-tools 3.16-1
Versions of packages linux-image-3.2.0-1-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.2.0-1-amd64 suggests:
pn grub-pc 1.99-14
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux 0.35
pn firmware-linux-nonfree 0.35
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-1-amd64/postinst/depmod-error-initrd-3.2.0-1-amd64: false
linux-image-3.2.0-1-amd64/postinst/missing-firmware-3.2.0-1-amd64:
linux-image-3.2.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-1-amd64/prerm/removing-running-kernel-3.2.0-1-amd64: true
--
David
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
