Package: linux-2.6 Version: 3.2.2-1 Severity: important Tags: upstream Dear Maintainer,
Since upgrading to linux-image-3.2.0-1-amd64, an external display connected via DisplayPort to a Sandy Bridge onboard graphics card stopped working, and instead turns off reporting “DP no signal”. With linux-image-3.1.0-1-amd64, the same display connected via the DisplayPort works fine. After powering both the display and the machine, the display first turns on when the i915 kernel module is loaded upon boot. It shows the console with boot messages at the maximum display resolution (1920x1080). Then the X server starts, and the external display switches to a lower resolution (1024x768), which seems to be the default setting of the X server. After login, I manually switch to the maximum resolution (1920x1080) using the command “xrandr --output DP1 --auto”. With linux-image-3.2.0-1-amd64, after powering both the display and the machine, the display remains dark during boot, even when the i915 kernel module is loaded. The display first turns on only when the X server is loaded, with the default resolution 1024x768. After login, I manually switch to 1920x1080, but then the display reports “DP no signal” and turns *off*. To summarize: The external display connected via DisplayPort works fine with Linux 3.1, while, with Linux 3.2, it works with lower (non-native) resolutions and fails with the maximum (native) resolution. I noticed one peculiarity: It is possible to have a working external display by booting into Linux 3.1 first, and then rebooting into Linux 3.2 *without interrupting the power supply of the display*. However, as soon as I power-cycle the display while under Linux 3.2, it stops working again. There is a recent thread by Keith Packard with DisplayPort-related patches: https://lkml.org/lkml/2012/1/25/204 I tested both a kernel with only patch 1/2, as well as a kernel with both patches 1/2 and 2/2 applied, based on the Debian kernel source and using the test-patches script. Both kernels showed the same faulty behaviour, i.e. the external display remains dark at the native resolution. If there are other potential fixes I could test, please let me know. Thanks, Peter -- xrandr: Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 277mm x 156mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 1680x1050 60.0 1600x900 60.0 1280x1024 60.0 1280x800 59.8 1280x720 60.0 1024x768 60.0 800x600 60.3 640x480 60.0 HDMI2 disconnected (normal left inverted right x axis y axis) HDMI3 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) DP3 disconnected (normal left inverted right x axis y axis) -- Package-specific info: ** Version: Linux version 3.2.0-1-amd64 (Debian 3.2.2-1) (b...@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-12) ) #1 SMP Wed Feb 1 08:56:58 UTC 2012 ** Command line: BOOT_IMAGE=/vmlinuz-3.2.0-1-amd64 root=/dev/mapper/vg-root ro pcie_aspm=force i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 ** Not tainted ** Kernel log: [ 20.446802] [drm] Initialized drm 1.1.0 20060810 [ 20.910637] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 20.928577] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input4 [ 20.948229] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 20.953169] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 20.953416] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0 [ 20.953667] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0 [ 20.953878] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 20.954053] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 20.954225] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 20.955314] i915 0000:00:02.0: power state changed by ACPI to D0 [ 20.955380] i915 0000:00:02.0: power state changed by ACPI to D0 [ 20.955446] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.955510] i915 0000:00:02.0: setting latency timer to 64 [ 20.983994] mtrr: no more MTRRs available [ 20.984054] [drm] MTRR allocation failed. Graphics performance may suffer. [ 20.984497] i915 0000:00:02.0: irq 51 for MSI/MSI-X [ 20.984501] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 20.984562] [drm] Driver supports precise vblank timestamp query. [ 20.984650] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 21.992817] fbcon: inteldrmfb (fb0) is primary device [ 22.346971] Console: switching to colour frame buffer device 170x48 [ 22.350019] fb0: inteldrmfb frame buffer device [ 22.350020] drm: registered panic notifier [ 22.352472] acpi device:01: registered as cooling_device4 [ 22.352618] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9 [ 22.352713] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 22.352843] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 22.536616] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 22.552359] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,discard [ 22.598845] loop: module loaded [ 22.739523] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: discard [ 22.743977] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: discard [ 22.748313] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: discard [ 23.940637] fuse init (API version 7.17) [ 23.964119] ip_tables: (C) 2000-2006 Netfilter Core Team [ 23.976705] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 23.985212] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 24.213703] lp: driver loaded but no devices found [ 24.225401] ppdev: user-space parallel port driver [ 24.321076] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 24.376920] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 24.378531] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.607437] Ebtables v2.0 registered [ 25.971779] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 25.974988] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 25.978784] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 29.229816] [drm] Changing LVDS panel from (+hsync, -vsync) to (-hsync, -vsync) ** Loaded modules: ebtable_nat ebtables snd_hrtimer acpi_cpufreq mperf parport_pc ppdev lp cpufreq_powersave parport cpufreq_conservative cpufreq_userspace cpufreq_stats binfmt_misc nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables fuse loop kvm_intel kvm snd_hda_codec_hdmi snd_hda_codec_conexant i915 drm_kms_helper drm i2c_algo_bit snd_hda_intel snd_hda_codec snd_hwdep arc4 snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer iwlwifi snd_seq_device mac80211 evdev snd cfg80211 tpm_tis psmouse i2c_i801 tpm iTCO_wdt serio_raw i2c_core soundcore iTCO_vendor_support ac rfkill tpm_bios battery snd_page_alloc power_supply video wmi button processor ext4 mbcache jbd2 crc16 sha256_generic aesni_intel cryptd aes_x86_64 aes_generic cbc dm_crypt dm_mod sd_mod crc_t10dif ehci_hcd ahci libahci libata scsi_mod sdhci_pci sdhci mmc_core xhci_hcd thermal thermal_sys e1000e usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: Lenovo Device [17aa:21da] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:21da] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 51 Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 5000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Lenovo Device [17aa:21da] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f2625000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04) Subsystem: Lenovo Device [17aa:21ce] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 42 Region 0: Memory at f2600000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at f262b000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 5080 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI]) Subsystem: Lenovo Device [17aa:21da] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f262a000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04) Subsystem: Lenovo Device [17aa:21da] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 50 Region 0: Memory at f2620000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: f2500000-f25fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: f1d00000-f24fffff Prefetchable memory behind bridge: 00000000f0400000-00000000f0bfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f1500000-f1cfffff Prefetchable memory behind bridge: 00000000f0c00000-00000000f13fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 [8086:1c1c] (rev b4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0 Memory behind bridge: f1400000-f14fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI]) Subsystem: Lenovo Device [17aa:21da] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f2629000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge [0601]: Intel Corporation QM67 Express Chipset Family LPC Controller [8086:1c4f] (rev 04) Subsystem: Lenovo Device [17aa:21da] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Device [17aa:21da] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 48 Region 0: I/O ports at 50a8 [size=8] Region 1: I/O ports at 50b4 [size=4] Region 2: I/O ports at 50a0 [size=8] Region 3: I/O ports at 50b0 [size=4] Region 4: I/O ports at 5060 [size=32] Region 5: Memory at f2628000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04) Subsystem: Lenovo Device [17aa:21da] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f2624000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at efa0 [size=32] Kernel driver in use: i801_smbus 03:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) Subsystem: Intel Corporation Centrino Ultimate-N 6300 3x3 AGN [8086:1111] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 49 Region 0: Memory at f2500000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi 0d:00.0 System peripheral [0880]: Ricoh Co Ltd MMC/SD Host Controller [1180:e822] (rev 07) (prog-if 01) Subsystem: Lenovo Device [17aa:21da] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f1500000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci 0e:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) (prog-if 30 [XHCI]) Subsystem: Lenovo Device [17aa:21da] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f1400000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing'), (200, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.41 ii initramfs-tools [linux-initramfs-tool] 0.99 ii linux-base 3.4 ii module-init-tools 3.16-1 Versions of packages linux-image-3.2.0-1-amd64 recommends: ii firmware-linux-free 3 Versions of packages linux-image-3.2.0-1-amd64 suggests: pn grub-pc 1.99-14 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi 0.35 pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-1-amd64/postinst/depmod-error-initrd-3.2.0-1-amd64: false linux-image-3.2.0-1-amd64/postinst/missing-firmware-3.2.0-1-amd64: linux-image-3.2.0-1-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-1-amd64/prerm/removing-running-kernel-3.2.0-1-amd64: true -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
