Package: linux-2.6
Version: 2.6.32-41
Severity: important
Tags: squeeze sid upstream
I receive a "Unknown host" message on the first connections try with xchat
(irc), gnus (nntp+smtp); Iceweasel randomly works the same way.
The first time I saw this, was with the 3.1 kernel (from Debian or Fedora)
and 3.2 doesn't change that a bit. 2.6.32-39squeeze1 is ok.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-41) (b...@decadent.org.uk) (gcc
version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 16 16:04:25 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=e6089469-e7d0-4519-973b-0507bd891134 ro quiet
** Not tainted
** Kernel log:
[ 7.009110] cfg80211: Using static regulatory domain info
[ 7.009124] cfg80211: Regulatory domain: US
[ 7.009133] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 7.009149] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 7.009164] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.009179] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.009195] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.009210] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.009225] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 7.248346] ACPI: Battery Slot [BAT0] (battery present)
[ 7.448700] Linux video capture interface: v2.00
[ 7.536962] cfg80211: Calling CRDA for country: US
[ 7.632076] [drm] Initialized drm 1.1.0 20060810
[ 7.655270] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps:
0xd04731/0xa40000/0xa0000
[ 7.723464] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input6
[ 7.972698] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.972719] i915 0000:00:02.0: setting latency timer to 64
[ 7.992540] uvcvideo: Found UVC 1.00 device 1.3M WebCam (04f2:b1d8)
[ 8.007731] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[ 8.007757] [drm] set up 7M of stolen space
[ 8.043343] input: 1.3M WebCam as
/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input7
[ 8.043558] usbcore: registered new interface driver uvcvideo
[ 8.043572] USB Video Class driver (v0.1.0)
[ 8.044800] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8.044833] ath9k 0000:02:00.0: setting latency timer to 64
[ 8.094934] ath: EEPROM regdomain: 0x65
[ 8.094943] ath: EEPROM indicates we should expect a direct regpair map
[ 8.094957] ath: Country alpha2 being used: 00
[ 8.094966] ath: Regpair used: 0x65
[ 8.114067] [drm] initialized overlay support
[ 8.592119] [drm] Big FIFO is enabled
[ 8.592143] [drm] Big FIFO is enabled
[ 8.788912] Console: switching to colour frame buffer device 128x37
[ 8.801504] fb0: inteldrmfb frame buffer device
[ 8.801513] registered panic notifier
[ 8.910065] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 8.914963] Registered led device: ath9k-phy0::radio
[ 8.915051] Registered led device: ath9k-phy0::assoc
[ 8.915140] Registered led device: ath9k-phy0::tx
[ 8.915229] Registered led device: ath9k-phy0::rx
[ 8.915322] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0:
mem=0xf8820000, irq=17
[ 9.004894] acpi device:24: registered as cooling_device3
[ 9.007146] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 9.007336] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 9.007416] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.106272] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ
19
[ 9.106411] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.210039] hda_codec: ALC272: BIOS auto-probing.
[ 9.211819] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input9
[ 9.973794] Adding 4030456k swap on /dev/sda5. Priority:-1 extents:1
across:4030456k
[ 10.304743] EXT3 FS on sda1, internal journal
[ 10.471439] loop: module loaded
[ 11.365470] kjournald starting. Commit interval 5 seconds
[ 11.366021] EXT3 FS on sda6, internal journal
[ 11.366035] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.546654] fuse init (API version 7.13)
[ 14.297232] apm: BIOS not found.
[ 14.416139] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input10
[ 15.250192] Bluetooth: Core ver 2.15
[ 15.250376] NET: Registered protocol family 31
[ 15.250387] Bluetooth: HCI device and connection manager initialized
[ 15.250399] Bluetooth: HCI socket layer initialized
[ 15.424623] Bluetooth: L2CAP ver 2.14
[ 15.424633] Bluetooth: L2CAP socket layer initialized
[ 15.479980] atl1c 0000:01:00.0: irq 28 for MSI/MSI-X
[ 15.481309] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.538752] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.583612] Bluetooth: RFCOMM TTY layer initialized
[ 15.583632] Bluetooth: RFCOMM socket layer initialized
[ 15.583644] Bluetooth: RFCOMM ver 1.11
[ 15.609476] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.609489] Bluetooth: BNEP filters: protocol multicast
[ 15.674083] Bridge firewalling registered
[ 15.926971] Bluetooth: SCO (Voice Link) ver 0.6
[ 15.926983] Bluetooth: SCO socket layer initialized
[ 18.069106] lp: driver loaded but no devices found
[ 18.291762] ppdev: user-space parallel port driver
[ 29.314789] CPU0 attaching NULL sched-domain.
[ 29.314801] CPU1 attaching NULL sched-domain.
[ 29.348219] CPU0 attaching sched-domain:
[ 29.348231] domain 0: span 0-1 level SIBLING
[ 29.348240] groups: group c280370c cpus 0 (cpu_power = 589) group c290370c
cpus 1 (cpu_power = 589)
[ 29.348262] domain 1: span 0-1 level MC
[ 29.348270] groups: group c2803778 cpus 0-1 (cpu_power = 1178)
[ 29.348289] CPU1 attaching sched-domain:
[ 29.348296] domain 0: span 0-1 level SIBLING
[ 29.348303] groups: group c290370c cpus 1 (cpu_power = 589) group c280370c
cpus 0 (cpu_power = 589)
[ 29.348324] domain 1: span 0-1 level MC
[ 29.348331] groups: group c2803778 cpus 0-1 (cpu_power = 1178)
[ 44.162676] wlan0: direct probe to AP 5c:33:8e:e0:82:d1 (try 1)
[ 44.169540] wlan0: direct probe responded
[ 44.169552] wlan0: authenticate with AP 5c:33:8e:e0:82:d1 (try 1)
[ 44.172336] wlan0: authenticated
[ 44.172393] wlan0: associate with AP 5c:33:8e:e0:82:d1 (try 1)
[ 44.176435] wlan0: RX AssocResp from 5c:33:8e:e0:82:d1 (capab=0x431 status=0
aid=1)
[ 44.176445] wlan0: associated
[ 44.194508] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 44.201537] cfg80211: Calling CRDA for country: FR
[ 44.498823] padlock: VIA PadLock not detected.
[ 54.664054] wlan0: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
aes_i586 6816 1
aes_generic 25738 1 aes_i586
acpi_cpufreq 4951 1
parport_pc 15799 0
cpufreq_stats 1997 0
ppdev 4058 0
cpufreq_userspace 1480 0
lp 5570 0
cpufreq_powersave 602 0
parport 22554 3 parport_pc,ppdev,lp
cpufreq_conservative 4018 0
sco 5885 2
bridge 33031 0
stp 996 1 bridge
bnep 7452 2
rfcomm 25199 0
l2cap 21721 6 bnep,rfcomm
crc16 1027 1 l2cap
bluetooth 36319 6 sco,bnep,rfcomm,l2cap
binfmt_misc 4907 1
uinput 4796 1
fuse 44268 1
loop 9769 0
snd_hda_codec_realtek 163378 1
snd_hda_intel 16823 1
snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4054 1 snd_hda_codec
arc4 974 2
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47226 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
ecb 1405 2
snd_seq_midi 3576 0
joydev 6739 0
snd_rawmidi 12513 1 snd_seq_midi
ath9k 238469 0
uvcvideo 45574 0
i915 223022 2
snd_seq_midi_event 3684 1 snd_seq_midi
drm_kms_helper 18569 1 i915
mac80211 123586 1 ath9k
ath 6018 1 ath9k
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
drm 111992 3 i915,drm_kms_helper
videodev 25605 1 uvcvideo
snd_timer 12270 2 snd_pcm,snd_seq
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
cfg80211 87645 3 ath9k,mac80211,ath
i2c_i801 6462 0
v4l1_compat 10250 2 uvcvideo,videodev
i2c_algo_bit 3493 1 i915
psmouse 44809 0
snd 34423 13
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
battery 3782 0
rfkill 10264 4 bluetooth,cfg80211
ac 1640 0
evdev 5609 16
serio_raw 2916 0
pcspkr 1207 0
i2c_core 12787 6
i915,drm_kms_helper,drm,videodev,i2c_i801,i2c_algo_bit
wmi 3575 0
video 14605 1 i915
led_class 1757 1 ath9k
button 3598 1 i915
processor 26327 3 acpi_cpufreq
output 1204 1 video
soundcore 3450 1 snd
snd_page_alloc 5045 2 snd_hda_intel,snd_pcm
ext3 94396 2
jbd 32401 1 ext3
mbcache 3762 1 ext3
sd_mod 26013 4
crc_t10dif 1012 1 sd_mod
fan 2586 0
ahci 27750 3
uhci_hcd 16057 0
thermal 9206 0
ehci_hcd 28689 0
libata 115889 1 ahci
thermal_sys 9378 4 video,processor,fan,thermal
atl1c 23864 0
scsi_mod 105001 2 sd_mod,libata
usbcore 99329 4 uvcvideo,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010]
Subsystem: Acer Incorporated [ALI] Device [1025:0349]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family
Integrated Graphics Controller [8086:a011] (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Device [1025:0349]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Region 0: Memory at 98180000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 60c0 [size=8]
Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at 98000000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated
Graphics Controller [8086:a012]
Subsystem: Acer Incorporated [ALI] Device [1025:0349]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at 98100000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition
Audio Controller [8086:27d8] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0349]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 98200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: 97000000-97ffffff
Prefetchable memory behind bridge: 0000000090000000-0000000090ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: 96000000-96ffffff
Prefetchable memory behind bridge: 0000000091000000-0000000091ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0349]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 4: I/O ports at 6080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0349]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at 6060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0349]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at 6040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0349]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 22
Region 4: I/O ports at 6020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI
Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0349]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 22
Region 0: Memory at 98204400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller
[8086:27bc] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0349]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI
Controller [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Acer Incorporated [ALI] Device [1025:0349]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 26
Region 0: I/O ports at 60b8 [size=8]
Region 1: I/O ports at 60cc [size=4]
Region 2: I/O ports at 60b0 [size=8]
Region 3: I/O ports at 60c8 [size=4]
Region 4: I/O ports at 60a0 [size=16]
Region 5: Memory at 98204000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller
[8086:27da] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0349]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 6000 [size=32]
Kernel driver in use: i801_smbus
01:00.0 Ethernet controller [0200]: Atheros Communications AR8132 Fast Ethernet
[1969:1062] (rev c0)
Subsystem: Acer Incorporated [ALI] Device [1025:0349]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at 97000000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at 5000 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless
Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: Foxconn International, Inc. Device [105b:e016]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 96000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
** USB devices:
not available
-- System Information:
Debian Release: 6.0.4
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-41 Linux image base package
ii module-init-tools 3.12-2+b1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-41 Binary firmware for various driver
ii libc6-i686 2.11.3-2 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
