Package: linux-2.6
Version: 3.2.1-1
Severity: normal
Dear Maintainer,
* What led up to the situation?
I installed the sid-packages on my wheezy desktop.
* What exactly did you do (or not do) that was effective (or
ineffective)?
I downloaded the required images via packages.debian.org and installed them
with dpkg -i
* What was the outcome of this action?
I attached my command line output. There is a line "E:
/usr/share/syslinux/themes/debian/extlinux: No such file or directory"
txt@txt:~$ sudo dpkg -i Downloads/linux-headers-3.2.0-1-* Downloads/linux-
image-3.2.0-1-amd64_3.2.1-1_amd64.deb
[sudo] password for txt:
Selecting previously unselected package linux-headers-3.2.0-1-amd64.
(Reading database ... 94132 files and directories currently installed.)
Unpacking linux-headers-3.2.0-1-amd64 (from .../linux-
headers-3.2.0-1-amd64_3.2.1-1_amd64.deb) ...
Selecting previously unselected package linux-headers-3.2.0-1-common.
Unpacking linux-headers-3.2.0-1-common (from .../linux-
headers-3.2.0-1-common_3.2.1-1_amd64.deb) ...
Selecting previously unselected package linux-image-3.2.0-1-amd64.
Unpacking linux-image-3.2.0-1-amd64 (from .../linux-
image-3.2.0-1-amd64_3.2.1-1_amd64.deb) ...
Setting up linux-headers-3.2.0-1-common (3.2.1-1) ...
Setting up linux-image-3.2.0-1-amd64 (3.2.1-1) ...
Running depmod.
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-1-amd64
/boot/vmlinuz-3.2.0-1-amd64
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-1-amd64
/boot/vmlinuz-3.2.0-1-amd64
update-initramfs: Generating /boot/initrd.img-3.2.0-1-amd64
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-2.fw for module
r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-1.fw for module
r8169
run-parts: executing /etc/kernel/postinst.d/pm-utils 3.2.0-1-amd64
/boot/vmlinuz-3.2.0-1-amd64
run-parts: executing /etc/kernel/postinst.d/zz-extlinux 3.2.0-1-amd64
/boot/vmlinuz-3.2.0-1-amd64
P: Checking for EXTLINUX directory... found.
P: Writing config for /boot/vmlinuz-3.2.0-rc7-amd64...
P: Writing config for /boot/vmlinuz-3.2.0-1-amd64...
P: Writing config for /boot/vmlinuz-3.1.0-1-amd64...
P: Updating /boot/extlinux/linux.cfg...
E: /usr/share/syslinux/themes/debian/extlinux: No such file or directory
run-parts: /etc/kernel/postinst.d/zz-extlinux exited with return code 1
Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-
image-3.2.0-1-amd64.postinst line 774, <STDIN> line 7.
dpkg: error processing linux-image-3.2.0-1-amd64 (--install):
subprocess installed post-installation script returned error exit status 1
Setting up linux-headers-3.2.0-1-amd64 (3.2.1-1) ...
Examining /etc/kernel/header_postinst.d.
run-parts: executing /etc/kernel/header_postinst.d/dkms 3.2.0-1-amd64
Errors were encountered while processing:
linux-image-3.2.0-1-amd64
txt@txt:~$ aptitude search extlinux
i A extlinux
- collection of boot loaders (ext2/3/4 and btrfs bootloader)
txt@txt:~$ aptitude search syslinux
i A syslinux
- collection of boot loaders
i A syslinux-common
- collection of boot loaders (common files)
v syslinux-theme
-
p syslinux-themes-debian
- collection of boot loaders (theme metapackage)
p syslinux-themes-debian-squeeze
- collection of boot loaders (debian-squeeze theme)
txt@txt:~$ sudo aptitude install syslinux-themes-debian
The following NEW packages will be installed:
memtest86+{a} syslinux-themes-debian syslinux-themes-debian-squeeze{a}
The following partially installed packages will be configured:
linux-image-3.2.0-1-amd64
0 packages upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 302 kB of archives. After unpacking 2,578 kB will be used.
Do you want to continue? [Y/n/?]
Get: 1 http://ftp.tu-chemnitz.de/pub/linux/debian/debian/ wheezy/main
memtest86+ amd64 4.20-1.1 [289 kB]
Get: 2 http://ftp.tu-chemnitz.de/pub/linux/debian/debian/ wheezy/main syslinux-
themes-debian-squeeze all 10-1 [10.3 kB]
Get: 3 http://ftp.tu-chemnitz.de/pub/linux/debian/debian/ wheezy/main syslinux-
themes-debian all 10-1 [2,972 B]
Fetched 302 kB in 0s (486 kB/s)
Preconfiguring packages ...
Selecting previously unselected package memtest86+.
(Reading database ... 106367 files and directories currently installed.)
Unpacking memtest86+ (from .../memtest86+_4.20-1.1_amd64.deb) ...
Selecting previously unselected package syslinux-themes-debian-squeeze.
Unpacking syslinux-themes-debian-squeeze (from .../syslinux-themes-debian-
squeeze_10-1_all.deb) ...
Selecting previously unselected package syslinux-themes-debian.
Unpacking syslinux-themes-debian (from .../syslinux-themes-debian_10-1_all.deb)
...
Setting up linux-image-3.2.0-1-amd64 (3.2.1-1) ...
Running depmod.
vmlinuz(/boot/vmlinuz-3.2.0-1-amd64
) points to /boot/vmlinuz-3.2.0-1-amd64
(/boot/vmlinuz-3.2.0-1-amd64) -- doing nothing at /var/lib/dpkg/info/linux-
image-3.2.0-1-amd64.postinst line 346, <STDIN> line 7.
initrd.img(/boot/initrd.img-3.2.0-1-amd64
) points to /boot/initrd.img-3.2.0-1-amd64
(/boot/initrd.img-3.2.0-1-amd64) -- doing nothing at /var/lib/dpkg/info/linux-
image-3.2.0-1-amd64.postinst line 346, <STDIN> line 7.
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-1-amd64
/boot/vmlinuz-3.2.0-1-amd64
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-1-amd64
/boot/vmlinuz-3.2.0-1-amd64
update-initramfs: Generating /boot/initrd.img-3.2.0-1-amd64
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-2.fw for module
r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-1.fw for module
r8169
run-parts: executing /etc/kernel/postinst.d/pm-utils 3.2.0-1-amd64
/boot/vmlinuz-3.2.0-1-amd64
run-parts: executing /etc/kernel/postinst.d/zz-extlinux 3.2.0-1-amd64
/boot/vmlinuz-3.2.0-1-amd64
P: Checking for EXTLINUX directory... found.
P: Writing config for /boot/vmlinuz-3.2.0-rc7-amd64...
P: Writing config for /boot/vmlinuz-3.2.0-1-amd64...
P: Writing config for /boot/vmlinuz-3.1.0-1-amd64...
P: Installing debian theme... done.
run-parts: executing /etc/kernel/postinst.d/zz-update-grub 3.2.0-1-amd64
/boot/vmlinuz-3.2.0-1-amd64
Generating grub.cfg ...
Found background image: /usr/share/images/desktop-base/desktop-grub.png
Found linux image: /boot/vmlinuz-3.2.0-1-amd64
Found initrd image: /boot/initrd.img-3.2.0-1-amd64
Found linux image: /boot/vmlinuz-3.2.0-rc7-amd64
Found initrd image: /boot/initrd.img-3.2.0-rc7-amd64
Found linux image: /boot/vmlinuz-3.1.0-1-amd64
Found initrd image: /boot/initrd.img-3.1.0-1-amd64
grep: input file `/boot/grub/grub.cfg.new' is also the output
done
Setting up memtest86+ (4.20-1.1) ...
Generating grub.cfg ...
Found background image: /usr/share/images/desktop-base/desktop-grub.png
Found linux image: /boot/vmlinuz-3.2.0-1-amd64
Found initrd image: /boot/initrd.img-3.2.0-1-amd64
Found linux image: /boot/vmlinuz-3.2.0-rc7-amd64
Found initrd image: /boot/initrd.img-3.2.0-rc7-amd64
Found linux image: /boot/vmlinuz-3.1.0-1-amd64
Found initrd image: /boot/initrd.img-3.1.0-1-amd64
Found memtest86+ image: /memtest86+.bin
Found memtest86+ multiboot image: /memtest86+_multiboot.bin
File descriptor 3 (pipe:[132530]) leaked on lvs invocation. Parent PID 32437:
/bin/sh
grep: input file `/boot/grub/grub.cfg.new' is also the output
done
Setting up syslinux-themes-debian-squeeze (10-1) ...
Setting up syslinux-themes-debian (10-1) ...
txt@txt:~$
* What outcome did you expect instead?
That the package does not depend on syslinux-themes-debian or that it is listed
as dependency.
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 1402
board_vendor: ASUSTeK Computer INC.
board_name: E35M1-M PRO
board_version: Rev X.0x
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 14h Processor
Root Complex [1022:1510]
Subsystem: ASUSTeK Computer Inc. Device [1043:84a5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
00:01.0 VGA compatible controller [0300]: ATI Technologies Inc Wrestler [Radeon
HD 6310] [1002:9802] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:84a5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at f000 [size=256]
Region 2: Memory at feb00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
00:01.1 Audio device [0403]: ATI Technologies Inc Wrestler HDMI Audio [Radeon
HD 6250/6310] [1002:1314]
Subsystem: ASUSTeK Computer Inc. Device [1043:84a5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 44
Region 0: Memory at feb44000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA
Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:8496]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at f140 [size=8]
Region 1: I/O ports at f130 [size=4]
Region 2: I/O ports at f120 [size=8]
Region 3: I/O ports at f110 [size=4]
Region 4: I/O ports at f100 [size=16]
Region 5: Memory at feb4f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0
Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8496]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb4e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI
Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8496]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feb4d000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0
Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8496]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb4c000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI
Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8496]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feb4b000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385]
(rev 42)
Subsystem: ASUSTeK Computer Inc. Device [1043:8496]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA)
[1002:4383] (rev 40)
Subsystem: ASUSTeK Computer Inc. Device [1043:8445]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feb40000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host
controller [1002:439d] (rev 40)
Subsystem: ASUSTeK Computer Inc. Device [1043:8496]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge
[1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2
Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8496]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at feb4a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:15.0 PCI bridge [0604]: ATI Technologies Inc SB700/SB800/SB900 PCI to PCI
bridge (PCIE port 0) [1002:43a0] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:15.1 PCI bridge [0604]: ATI Technologies Inc SB700/SB800/SB900 PCI to PCI
bridge (PCIE port 1) [1002:43a1] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Prefetchable memory behind bridge: 00000000fc000000-00000000fc0fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:15.2 PCI bridge [0604]: ATI Technologies Inc SB900 PCI to PCI bridge (PCIE
port 2) [1002:43a2] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:15.3 PCI bridge [0604]: ATI Technologies Inc SB900 PCI to PCI bridge (PCIE
port 3) [1002:43a3] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0
Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8496]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb49000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.2 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI
Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8496]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feb48000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h
Processor Function 0 [1022:1700] (rev 43)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h
Processor Function 1 [1022:1701]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h
Processor Function 2 [1022:1702]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h
Processor Function 3 [1022:1703]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h
Processor Function 4 [1022:1704]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h
Processor Function 6 [1022:1718]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.6 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h
Processor Function 5 [1022:1716]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.7 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h
Processor Function 7 [1022:1719]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: ASUSTeK Computer Inc. P8P67 and other motherboards
[1043:8432]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at fc004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fc000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
04:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM108x PCIe to PCI Bridge
Controller [1b21:1080] (rev 01) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
05:00.0 Multimedia audio controller [0401]: Creative Labs SB Audigy [1102:0004]
(rev 03)
Subsystem: Creative Labs SB0090 Audigy Player/OEM [1102:0053]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at d080 [size=32]
Capabilities: <access denied>
Kernel driver in use: snd_emu10k1
05:00.1 Input device controller [0980]: Creative Labs SB Audigy Game Port
[1102:7003] (rev 03)
Subsystem: Creative Labs SB Audigy Game Port [1102:0040]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: I/O ports at d0a0 [size=8]
Capabilities: <access denied>
Kernel driver in use: Emu10k1_gameport
05:00.2 FireWire (IEEE 1394) [0c00]: Creative Labs SB Audigy FireWire Port
[1102:4001] (prog-if 10 [OHCI])
Subsystem: Creative Labs SB Audigy FireWire Port [1102:0010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fea05000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fea00000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
05:02.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire
II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M4A series motherboard [1043:81fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fea04000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at d000 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
06:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB
Host Controller [1b21:1042] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8488]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fe900000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 009: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 002 Device 002: ID 1058:1112 Western Digital Technologies, Inc.
Bus 001 Device 010: ID 0a81:0205 Chesen Electronics Corp. PS/2 Keyboard+Mouse
Adapter
Bus 001 Device 011: ID 04b4:0306 Cypress Semiconductor Corp. Telephone Receiver
Bus 001 Device 015: ID 046d:c52b Logitech, Inc. Unifying Receiver
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.1.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.4
ii module-init-tools 3.16-1
Versions of packages linux-image-3.2.0-1-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.2.0-1-amd64 suggests:
pn extlinux 2:4.05+dfsg-1
pn grub-pc 1.99-14
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux 0.34
pn firmware-linux-nonfree 0.34
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek 0.34
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-1-amd64/postinst/depmod-error-initrd-3.2.0-1-amd64: false
* linux-image-3.2.0-1-amd64/postinst/missing-firmware-3.2.0-1-amd64:
linux-image-3.2.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-1-amd64/prerm/removing-running-kernel-3.2.0-1-amd64: true
*** /home/txt/blub
txt@txt:~$ sudo dpkg -i Downloads/linux-headers-3.2.0-1-*
Downloads/linux-image-3.2.0-1-amd64_3.2.1-1_amd64.deb
[sudo] password for txt:
Selecting previously unselected package linux-headers-3.2.0-1-amd64.
(Reading database ... 94132 files and directories currently installed.)
Unpacking linux-headers-3.2.0-1-amd64 (from
.../linux-headers-3.2.0-1-amd64_3.2.1-1_amd64.deb) ...
Selecting previously unselected package linux-headers-3.2.0-1-common.
Unpacking linux-headers-3.2.0-1-common (from
.../linux-headers-3.2.0-1-common_3.2.1-1_amd64.deb) ...
Selecting previously unselected package linux-image-3.2.0-1-amd64.
Unpacking linux-image-3.2.0-1-amd64 (from
.../linux-image-3.2.0-1-amd64_3.2.1-1_amd64.deb) ...
Setting up linux-headers-3.2.0-1-common (3.2.1-1) ...
Setting up linux-image-3.2.0-1-amd64 (3.2.1-1) ...
Running depmod.
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-1-amd64
/boot/vmlinuz-3.2.0-1-amd64
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-1-amd64
/boot/vmlinuz-3.2.0-1-amd64
update-initramfs: Generating /boot/initrd.img-3.2.0-1-amd64
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-2.fw for module
r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-1.fw for module
r8169
run-parts: executing /etc/kernel/postinst.d/pm-utils 3.2.0-1-amd64
/boot/vmlinuz-3.2.0-1-amd64
run-parts: executing /etc/kernel/postinst.d/zz-extlinux 3.2.0-1-amd64
/boot/vmlinuz-3.2.0-1-amd64
P: Checking for EXTLINUX directory... found.
P: Writing config for /boot/vmlinuz-3.2.0-rc7-amd64...
P: Writing config for /boot/vmlinuz-3.2.0-1-amd64...
P: Writing config for /boot/vmlinuz-3.1.0-1-amd64...
P: Updating /boot/extlinux/linux.cfg...
E: /usr/share/syslinux/themes/debian/extlinux: No such file or directory
run-parts: /etc/kernel/postinst.d/zz-extlinux exited with return code 1
Failed to process /etc/kernel/postinst.d at
/var/lib/dpkg/info/linux-image-3.2.0-1-amd64.postinst line 774, <STDIN> line 7.
dpkg: error processing linux-image-3.2.0-1-amd64 (--install):
subprocess installed post-installation script returned error exit status 1
Setting up linux-headers-3.2.0-1-amd64 (3.2.1-1) ...
Examining /etc/kernel/header_postinst.d.
run-parts: executing /etc/kernel/header_postinst.d/dkms 3.2.0-1-amd64
Errors were encountered while processing:
linux-image-3.2.0-1-amd64
txt@txt:~$ aptitude search extlinux
i A extlinux
- collection of boot loaders (ext2/3/4 and btrfs bootloader)
txt@txt:~$ aptitude search syslinux
i A syslinux
- collection of boot loaders
i A syslinux-common
- collection of boot loaders (common files)
v syslinux-theme
-
p syslinux-themes-debian
- collection of boot loaders (theme metapackage)
p syslinux-themes-debian-squeeze
- collection of boot loaders (debian-squeeze theme)
txt@txt:~$ sudo aptitude install syslinux-themes-debian
The following NEW packages will be installed:
memtest86+{a} syslinux-themes-debian syslinux-themes-debian-squeeze{a}
The following partially installed packages will be configured:
linux-image-3.2.0-1-amd64
0 packages upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 302 kB of archives. After unpacking 2,578 kB will be used.
Do you want to continue? [Y/n/?]
Get: 1 http://ftp.tu-chemnitz.de/pub/linux/debian/debian/ wheezy/main
memtest86+ amd64 4.20-1.1 [289 kB]
Get: 2 http://ftp.tu-chemnitz.de/pub/linux/debian/debian/ wheezy/main
syslinux-themes-debian-squeeze all 10-1 [10.3 kB]
Get: 3 http://ftp.tu-chemnitz.de/pub/linux/debian/debian/ wheezy/main
syslinux-themes-debian all 10-1 [2,972 B]
Fetched 302 kB in 0s (486 kB/s)
Preconfiguring packages ...
Selecting previously unselected package memtest86+.
(Reading database ... 106367 files and directories currently installed.)
Unpacking memtest86+ (from .../memtest86+_4.20-1.1_amd64.deb) ...
Selecting previously unselected package syslinux-themes-debian-squeeze.
Unpacking syslinux-themes-debian-squeeze (from
.../syslinux-themes-debian-squeeze_10-1_all.deb) ...
Selecting previously unselected package syslinux-themes-debian.
Unpacking syslinux-themes-debian (from .../syslinux-themes-debian_10-1_all.deb)
...
Setting up linux-image-3.2.0-1-amd64 (3.2.1-1) ...
Running depmod.
vmlinuz(/boot/vmlinuz-3.2.0-1-amd64
) points to /boot/vmlinuz-3.2.0-1-amd64
(/boot/vmlinuz-3.2.0-1-amd64) -- doing nothing at
/var/lib/dpkg/info/linux-image-3.2.0-1-amd64.postinst line 346, <STDIN> line 7.
initrd.img(/boot/initrd.img-3.2.0-1-amd64
) points to /boot/initrd.img-3.2.0-1-amd64
(/boot/initrd.img-3.2.0-1-amd64) -- doing nothing at
/var/lib/dpkg/info/linux-image-3.2.0-1-amd64.postinst line 346, <STDIN> line 7.
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-1-amd64
/boot/vmlinuz-3.2.0-1-amd64
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-1-amd64
/boot/vmlinuz-3.2.0-1-amd64
update-initramfs: Generating /boot/initrd.img-3.2.0-1-amd64
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-2.fw for module
r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-1.fw for module
r8169
run-parts: executing /etc/kernel/postinst.d/pm-utils 3.2.0-1-amd64
/boot/vmlinuz-3.2.0-1-amd64
run-parts: executing /etc/kernel/postinst.d/zz-extlinux 3.2.0-1-amd64
/boot/vmlinuz-3.2.0-1-amd64
P: Checking for EXTLINUX directory... found.
P: Writing config for /boot/vmlinuz-3.2.0-rc7-amd64...
P: Writing config for /boot/vmlinuz-3.2.0-1-amd64...
P: Writing config for /boot/vmlinuz-3.1.0-1-amd64...
P: Installing debian theme... done.
run-parts: executing /etc/kernel/postinst.d/zz-update-grub 3.2.0-1-amd64
/boot/vmlinuz-3.2.0-1-amd64
Generating grub.cfg ...
Found background image: /usr/share/images/desktop-base/desktop-grub.png
Found linux image: /boot/vmlinuz-3.2.0-1-amd64
Found initrd image: /boot/initrd.img-3.2.0-1-amd64
Found linux image: /boot/vmlinuz-3.2.0-rc7-amd64
Found initrd image: /boot/initrd.img-3.2.0-rc7-amd64
Found linux image: /boot/vmlinuz-3.1.0-1-amd64
Found initrd image: /boot/initrd.img-3.1.0-1-amd64
grep: input file `/boot/grub/grub.cfg.new' is also the output
done
Setting up memtest86+ (4.20-1.1) ...
Generating grub.cfg ...
Found background image: /usr/share/images/desktop-base/desktop-grub.png
Found linux image: /boot/vmlinuz-3.2.0-1-amd64
Found initrd image: /boot/initrd.img-3.2.0-1-amd64
Found linux image: /boot/vmlinuz-3.2.0-rc7-amd64
Found initrd image: /boot/initrd.img-3.2.0-rc7-amd64
Found linux image: /boot/vmlinuz-3.1.0-1-amd64
Found initrd image: /boot/initrd.img-3.1.0-1-amd64
Found memtest86+ image: /memtest86+.bin
Found memtest86+ multiboot image: /memtest86+_multiboot.bin
File descriptor 3 (pipe:[132530]) leaked on lvs invocation. Parent PID 32437:
/bin/sh
grep: input file `/boot/grub/grub.cfg.new' is also the output
done
Setting up syslinux-themes-debian-squeeze (10-1) ...
Setting up syslinux-themes-debian (10-1) ...
txt@txt:~$
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
