forwarded 655385 http://bugzilla.openvz.org/show_bug.cgi?id=2142 thanks
Just want to report that I have filed this upstream now. // Ola On Tue, Jan 10, 2012 at 09:01:08PM +0100, Corin Langosch wrote: > Package: linux-2.6 > Version: 2.6.32-38 > Severity: important > > When doing a "cat /proc/self/mountinfo" inside a guest the result is "Cannot > allocate memory". > > What really makes it evil: the page cache of the whole machine is flushed and > all swap space available consumed. This effectively causes the whole system > to freeze because of the high load / disk io. > > -- Package-specific info: > ** Version: > Linux version 2.6.32-5-openvz-amd64 (Debian 2.6.32-38) (b...@decadent.org.uk) > (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Oct 3 05:12:50 UTC 2011 > > ** Command line: > BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-openvz-amd64 > root=UUID=1924430b-93b2-4781-b1bb-6281966c64fc ro quiet > > ** Tainted: W (512) > * Taint on warning. > > ** Kernel log: > [ 1.954245] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 1.954260] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 1.954371] sda: sda1 sda2 < sda5 > > [ 1.955496] sd 0:0:0:0: [sda] Attached SCSI disk > [ 2.043616] e1000: 0000:00:08.0: e1000_probe: (PCI:33MHz:32-bit) > 08:00:27:29:8c:5c > [ 2.094618] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection > [ 2.094726] alloc irq_desc for 22 on node -1 > [ 2.094731] alloc kstat_irqs on node -1 > [ 2.094769] ohci_hcd 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ > 22 > [ 2.094817] ohci_hcd 0000:00:06.0: OHCI Host Controller > [ 2.094832] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus > number 2 > [ 2.094906] ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0804000 > [ 2.150065] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 > [ 2.150080] usb usb2: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.150088] usb usb2: Product: OHCI Host Controller > [ 2.150093] usb usb2: Manufacturer: Linux 2.6.32-5-openvz-amd64 ohci_hcd > [ 2.150100] usb usb2: SerialNumber: 0000:00:06.0 > [ 2.150345] usb usb2: configuration #1 chosen from 1 choice > [ 2.150430] hub 2-0:1.0: USB hub found > [ 2.150502] hub 2-0:1.0: 8 ports detected > [ 2.286615] PM: Starting manual resume from disk > [ 2.286620] PM: Resume from partition 8:5 > [ 2.286622] PM: Checking hibernation image. > [ 2.286770] PM: Error -22 checking image file > [ 2.286773] PM: Resume from disk failed. > [ 2.306573] kjournald starting. Commit interval 5 seconds > [ 2.306650] EXT3-fs: mounted filesystem with ordered data mode. > [ 2.561494] usb 2-1: new full speed USB device using ohci_hcd and address 2 > [ 2.606712] udev[288]: starting version 164 > [ 2.684580] processor LNXCPU:00: registered as cooling_device0 > [ 2.684580] processor LNXCPU:01: registered as cooling_device1 > [ 2.684607] processor LNXCPU:02: registered as cooling_device2 > [ 2.684647] processor LNXCPU:03: registered as cooling_device3 > [ 2.684715] processor LNXCPU:04: registered as cooling_device4 > [ 2.684720] processor LNXCPU:05: registered as cooling_device5 > [ 2.684756] processor LNXCPU:06: registered as cooling_device6 > [ 2.684796] processor LNXCPU:07: registered as cooling_device7 > [ 2.686623] input: Power Button as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 > [ 2.686630] ACPI: Power Button [PWRF] > [ 2.686704] input: Sleep Button as > /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3 > [ 2.686714] ACPI: Sleep Button [SLPF] > [ 2.691095] ACPI: AC Adapter [AC] (on-line) > [ 2.692524] ACPI: Battery Slot [BAT0] (battery present) > [ 2.701210] input: PC Speaker as /devices/platform/pcspkr/input/input4 > [ 2.701866] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - > upgrade BIOS or use force_addr=0xaddr > [ 2.705098] parport_pc 00:04: reported by Plug and Play ACPI > [ 2.732204] input: ImExPS/2 Generic Explorer Mouse as > /devices/platform/i8042/serio1/input/input5 > [ 2.759987] Error: Driver 'pcspkr' is already registered, aborting... > [ 2.828204] usb 2-1: New USB device found, idVendor=80ee, idProduct=0021 > [ 2.828231] usb 2-1: New USB device strings: Mfr=1, Product=3, > SerialNumber=0 > [ 2.828238] usb 2-1: Product: USB Tablet > [ 2.828243] usb 2-1: Manufacturer: VirtualBox > [ 2.828515] usb 2-1: configuration #1 chosen from 1 choice > [ 2.858372] usbcore: registered new interface driver hiddev > [ 2.873203] input: VirtualBox USB Tablet as > /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input6 > [ 2.873366] generic-usb 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 > Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0 > [ 2.873450] usbcore: registered new interface driver usbhid > [ 2.873462] usbhid: v2.6:USB HID core driver > [ 3.167371] Adding 477176k swap on /dev/sda5. Priority:-1 extents:1 > across:477176k > [ 3.245533] EXT3 FS on sda1, internal journal > [ 3.293283] loop: module loaded > [ 3.808534] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow > Control: RX > [ 3.816591] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow > Control: RX > [ 3.816981] ADDRCONF(NETDEV_UP): eth1: link is not ready > [ 3.819172] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready > [ 4.687991] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 14.192213] eth1: no IPv6 routers present > [ 14.624347] eth0: no IPv6 routers present > [ 30.768884] process `sysctl' is using deprecated sysctl (syscall) > net.ipv6.neigh.default.retrans_time; Use > net.ipv6.neigh.default.retrans_time_ms instead. > [14858.191959] warning: `vzctl' uses 32-bit capabilities (legacy support in > use) > [14858.248739] CT: 100: started > [15007.787106] ------------[ cut here ]------------ > [15007.787124] WARNING: at > /build/buildd-linux-2.6_2.6.32-38-amd64-bk66e4/linux-2.6-2.6.32/debian/build/source_amd64_openvz/mm/page_alloc.c:1828 > __alloc_pages_nodemask+0x186/0x6c7() > [15007.787131] Hardware name: VirtualBox > [15007.787133] Modules linked in: vzethdev vznetdev simfs vzrst vzcpt > vzdquota vzmon vzdev xt_tcpudp xt_length xt_hl xt_tcpmss xt_TCPMSS > iptable_mangle iptable_filter xt_multiport xt_limit xt_dscp ipt_REJECT > ip_tables x_tables vzevent loop joydev usbhid hid snd_pcm snd_timer snd > psmouse soundcore serio_raw snd_page_alloc parport_pc evdev i2c_piix4 pcspkr > parport ac battery button processor i2c_core ext3 jbd mbcache sd_mod > crc_t10dif ohci_hcd ahci ehci_hcd libata scsi_mod usbcore nls_base thermal > e1000 thermal_sys [last unloaded: scsi_wait_scan] > [15007.787171] Pid: 3101, comm: facter Not tainted 2.6.32-5-openvz-amd64 #1 > [15007.787173] Call Trace: > [15007.787177] [<ffffffff810bcefb>] ? __alloc_pages_nodemask+0x186/0x6c7 > [15007.787180] [<ffffffff810bcefb>] ? __alloc_pages_nodemask+0x186/0x6c7 > [15007.787184] [<ffffffff8104e0a0>] ? warn_slowpath_common+0x77/0xa3 > [15007.787188] [<ffffffff810bcefb>] ? __alloc_pages_nodemask+0x186/0x6c7 > [15007.787191] [<ffffffff810e961e>] ? new_slab+0x104/0x228 > [15007.787194] [<ffffffff811002c7>] ? __d_path+0x116/0x1e0 > [15007.787198] [<ffffffff810bc3b9>] ? __get_free_pages+0x9/0x38 > [15007.787200] [<ffffffff810e90a5>] ? __kmalloc+0x3f/0x17f > [15007.787203] [<ffffffff81108eb8>] ? seq_read+0x226/0x388 > [15007.787207] [<ffffffff810f1d0a>] ? vfs_read+0xa6/0xff > [15007.787210] [<ffffffff810f1e7d>] ? sys_read+0x49/0xc4 > [15007.787213] [<ffffffff81010c12>] ? system_call_fastpath+0x16/0x1b > [15007.787215] ---[ end trace 5d75e2eb811ce4bf ]--- > [16151.459396] NET: Registered protocol family 3 > [16151.481955] NET: Registered protocol family 6 > [16151.493279] NET: Registered protocol family 11 > [16151.514999] NET: Registered protocol family 4 > [16151.535658] NET: Registered protocol family 5 > [17097.715335] Adding 477176k swap on /dev/sda5. Priority:-1 extents:1 > across:477176k > [24897.060905] hrtimer: interrupt took 29975877 ns > [24966.141636] CT: 100: stopped > [24967.140710] CT: 100: started > [25614.326816] Adding 477176k swap on /dev/sda5. Priority:-1 extents:1 > across:477176k > > ** Model information > sys_vendor: innotek GmbH > product_name: VirtualBox > product_version: 1.2 > bios_vendor: innotek GmbH > bios_version: VirtualBox > > ** Loaded modules: > Module Size Used by > appletalk 24213 0 > ipx 18854 0 > p8023 1044 1 ipx > rose 33930 0 > netrom 29272 0 > ax25 39739 2 rose,netrom > vzethdev 7301 0 > vznetdev 17967 2 > simfs 3087 1 > vzrst 110398 0 > vzcpt 97106 0 > vzdquota 35158 1 [permanent] > vzmon 16317 5 vzethdev,vznetdev,vzrst,vzcpt > vzdev 1824 6 vzethdev,vznetdev,vzdquota,vzmon > xt_tcpudp 2319 0 > xt_length 1164 0 > xt_hl 1313 0 > xt_tcpmss 1401 0 > xt_TCPMSS 2935 0 > iptable_mangle 2881 0 > iptable_filter 2322 0 > xt_multiport 2267 0 > xt_limit 1782 0 > xt_dscp 1805 0 > ipt_REJECT 1953 0 > ip_tables 14123 2 iptable_mangle,iptable_filter > x_tables 13213 10 > xt_tcpudp,xt_length,xt_hl,xt_tcpmss,xt_TCPMSS,xt_multiport,xt_limit,xt_dscp,ipt_REJECT,ip_tables > vzevent 1723 1 > loop 11751 0 > joydev 8475 0 > usbhid 33308 0 > hid 63305 1 usbhid > snd_pcm 60503 0 > snd_timer 15614 1 snd_pcm > snd 46574 2 snd_pcm,snd_timer > psmouse 49937 0 > soundcore 4598 1 snd > serio_raw 3768 0 > snd_page_alloc 6265 1 snd_pcm > parport_pc 18855 0 > evdev 7368 3 > i2c_piix4 8328 0 > pcspkr 1699 0 > parport 27954 1 parport_pc > ac 2192 0 > battery 4998 0 > button 4682 0 > processor 29999 0 > i2c_core 15819 1 i2c_piix4 > ext3 106678 1 > jbd 37205 1 ext3 > mbcache 5050 1 ext3 > sd_mod 29889 2 > crc_t10dif 1276 1 sd_mod > ohci_hcd 19359 0 > ahci 32534 1 > ehci_hcd 32097 0 > libata 133696 1 ahci > scsi_mod 126597 2 sd_mod,libata > usbcore 122850 4 usbhid,ohci_hcd,ehci_hcd > nls_base 6377 1 usbcore > thermal 11754 0 > e1000 85501 0 > thermal_sys 11942 2 processor,thermal > > ** PCI devices: > 00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] > [8086:1237] (rev 02) > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > 00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton > II] [8086:7000] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > > 00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH > VirtualBox Graphics Adapter [80ee:beef] (prog-if 00 [VGA controller]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at e0000000 (32-bit, prefetchable) [size=16M] > Expansion ROM at <unassigned> [disabled] > > 00:03.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit > Ethernet Controller [8086:100e] (rev 02) > Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter [8086:001e] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 (63750ns min) > Interrupt: pin A routed to IRQ 19 > Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=128K] > Region 2: I/O ports at d000 [size=8] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [e4] PCI-X non-bridge device > Command: DPERE- ERO+ RBC=512 OST=1 > Status: Dev=ff:1f.0 64bit- 133MHz- SCD- USC- DC=simple > DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- > Kernel driver in use: e1000 > > 00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox > Guest Service [80ee:cafe] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 9 > Region 0: I/O ports at d020 [size=32] > Region 1: Memory at f0400000 (32-bit, non-prefetchable) [size=4M] > Region 2: Memory at f0800000 (32-bit, prefetchable) [size=16K] > > 00:06.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB > [106b:003f] (prog-if 10 [OHCI]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Interrupt: pin A routed to IRQ 22 > Region 0: Memory at f0804000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci_hcd > > 00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] > (rev 08) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 9 > > 00:08.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit > Ethernet Controller [8086:100e] (rev 02) > Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter [8086:001e] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 (63750ns min) > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at f0820000 (32-bit, non-prefetchable) [size=128K] > Region 2: I/O ports at d040 [size=8] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [e4] PCI-X non-bridge device > Command: DPERE- ERO+ RBC=512 OST=1 > Status: Dev=ff:1f.0 64bit- 133MHz- SCD- USC- DC=simple > DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- > Kernel driver in use: e1000 > > 00:0b.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) USB2 EHCI Controller [8086:265c] (prog-if 20 [EHCI]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 19 > Region 0: Memory at f0840000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ehci_hcd > > 00:0d.0 SATA controller [0106]: Intel Corporation 82801HBM/HEM > (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 02) (prog-if 01 [AHCI > 1.0]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Interrupt: pin A routed to IRQ 21 > Region 0: I/O ports at d048 [size=8] > Region 1: I/O ports at <ignored> > Region 2: I/O ports at d058 [size=8] > Region 3: I/O ports at <ignored> > Region 4: I/O ports at d070 [size=16] > Region 5: Memory at f0842000 (32-bit, non-prefetchable) [size=8K] > Capabilities: [70] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000002 > Kernel driver in use: ahci > > > ** USB devices: > Bus 002 Device 002: ID 80ee:0021 VirtualBox USB Tablet > Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > > -- System Information: > Debian Release: 6.0.3 > APT prefers stable-updates > APT policy: (500, 'stable-updates'), (500, 'stable') > Architecture: amd64 (x86_64) > > Kernel: Linux 2.6.32-5-openvz-amd64 (SMP w/8 CPU cores) > Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) > Shell: /bin/sh linked to /bin/dash > > Versions of packages linux-image-2.6.32-5-openvz-amd64 depends on: > ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management > sy > ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs > ii linux-base 2.6.32-38 Linux image base package > ii module-init-tools 3.12-1 tools for managing Linux kernel > mo > ii vzctl 3.0.24-12 server virtualization solution - > c > > Versions of packages linux-image-2.6.32-5-openvz-amd64 recommends: > ii firmware-linux-free 2.6.32-38 Binary firmware for various > driver > > Versions of packages linux-image-2.6.32-5-openvz-amd64 suggests: > pn grub | lilo <none> (no description available) > pn linux-doc-2.6.32 <none> (no description available) > > Versions of packages linux-image-2.6.32-5-openvz-amd64 is related to: > pn firmware-bnx2 <none> (no description available) > pn firmware-bnx2x <none> (no description available) > pn firmware-ipw2x00 <none> (no description available) > pn firmware-ivtv <none> (no description available) > pn firmware-iwlwifi <none> (no description available) > pn firmware-linux <none> (no description available) > pn firmware-linux-nonfree <none> (no description available) > pn firmware-qlogic <none> (no description available) > pn firmware-ralink <none> (no description available) > pn xen-hypervisor <none> (no description available) > > -- debconf information: > > linux-image-2.6.32-5-openvz-amd64/postinst/missing-firmware-2.6.32-5-openvz-amd64: > > linux-image-2.6.32-5-openvz-amd64/postinst/depmod-error-initrd-2.6.32-5-openvz-amd64: > false > > linux-image-2.6.32-5-openvz-amd64/prerm/removing-running-kernel-2.6.32-5-openvz-amd64: > true > > linux-image-2.6.32-5-openvz-amd64/postinst/ignoring-do-bootloader-2.6.32-5-openvz-amd64: > > > > -- > To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org > with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org > Archive: http://lists.debian.org/20120110200108.25409.74335.reportbug@debian > > -- --------------------- Ola Lundqvist --------------------------- / o...@debian.org Annebergsslingan 37 \ | o...@inguza.com 654 65 KARLSTAD | | http://inguza.com/ +46 (0)70-332 1551 | \ gpg/f.p.: 7090 A92B 18FE 7994 0C36 4FE4 18A1 B1CF 0FE5 3DD9 / --------------------------------------------------------------- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
