Package: linux-2.6
Version: 3.1.1-1
Severity: normal
Tags: d-i
I first noticed this issue using 2.6.38-rc5-686 and 2.6.38-rc6-686.
Although, 2.6.38-1-686 worked out of the box, the regession showed again
using 2.6.39-rcX kernels,
and continues to show using all 686-pae kernels.
Adding <processor.nocst=1> to the kernel commandline works around the issue.
Using 486 kernels is another workaround to this issue.
see: #627019 linux-image-2.6.39-rc7-686-pae: several kernel hangs ...
-- Package-specific info:
** Version:
Linux version 3.1.0-1-686-pae (Debian 3.1.1-1) (b...@decadent.org.uk)
(gcc version 4.6.2 (Debian 4.6.2-4) ) #1 SMP Mon Nov 14 08:24:20 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-686-pae root=/dev/sdb8 ro processor.nocst=1
** Not tainted
** Kernel log:
[ 5.702701] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card
(0x04a100a1)
[ 5.704709] IR RC5(x) protocol handler initialized
[ 5.706708] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from
PRAMIN
[ 5.798468] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 5.798533] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 5.798591] [drm] nouveau 0000:01:00.0: Bios version 05.44.a2.07
[ 5.798650] [drm] nouveau 0000:01:00.0: TMDS table version 1.1
[ 5.798707] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
[ 5.798765] [drm] nouveau 0000:01:00.0: Found Display Configuration Block
version 3.0
[ 5.798836] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028
[ 5.798895] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011310 00000028
[ 5.798953] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01011312 00000000
[ 5.799012] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020223f1 0084c030
[ 5.799071] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 7 2
[ 5.799131] [drm] nouveau 0000:01:00.0: 0: 0x00000000: type 0x00 idx 0 tag
0xff
[ 5.799202] [drm] nouveau 0000:01:00.0: 1: 0x00002230: type 0x30 idx 1 tag
0x08
[ 5.799272] [drm] nouveau 0000:01:00.0: 2: 0x00000110: type 0x10 idx 2 tag
0xff
[ 5.799341] [drm] nouveau 0000:01:00.0: 3: 0x00000111: type 0x11 idx 3 tag
0xff
[ 5.799410] [drm] nouveau 0000:01:00.0: 4: 0x00000113: type 0x13 idx 4 tag
0xff
[ 5.799484] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset
0xDD1E
[ 5.802028] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset
0xE00C
[ 5.807894] IR RC6 protocol handler initialized
[ 5.815248] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset
0xE546
[ 5.815342] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset
0xE6A3
[ 5.816531] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset
0xE82C
[ 5.816604] [drm] nouveau 0000:01:00.0: mem timing table length unknown: 14
[ 5.816664] [drm] nouveau 0000:01:00.0: timingset 255 does not exist
[ 5.833530] i2c-core: driver [msp3400] using legacy suspend method
[ 5.833597] i2c-core: driver [msp3400] using legacy resume method
[ 5.836820] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[ 5.836885] [drm] nouveau 0000:01:00.0: 0: memory 532MHz core 350MHz
fanspeed 100%
[ 5.836963] [drm] nouveau 0000:01:00.0: c: memory 401MHz core 200MHz
[ 5.837330] [TTM] Zone kernel: Available graphics memory: 448398 kiB.
[ 5.837449] [TTM] Zone highmem: Available graphics memory: 516082 kiB.
[ 5.837514] [TTM] Initializing pool allocator.
[ 5.837601] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
[ 5.837895] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 5.837974] agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode.
[ 5.838116] IR JVC protocol handler initialized
[ 5.838325] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[ 5.838540] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[ 5.838634] [drm] nouveau 0000:01:00.0: 256 MiB GART (aperture)
[ 5.838876] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 5.914955] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.915027] [drm] No driver support for vblank timestamp query.
[ 5.917941] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder
(output 0)
[ 5.918021] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder
(output 1)
[ 5.918097] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder
(output 2)
[ 5.918179] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder
(output 3)
[ 5.948032] intel8x0_measure_ac97_clock: measured 55898 usecs (2693 samples)
[ 5.948101] intel8x0: clocking to 48000
[ 5.962545] IR Sony protocol handler initialized
[ 5.971068] IR MCE Keyboard/mouse protocol handler initialized
[ 5.979526] bttv0: audio absent, no audio device found!
[ 6.057390] i2c-core: driver [tuner] using legacy suspend method
[ 6.057461] i2c-core: driver [tuner] using legacy resume method
[ 6.058546] lirc_dev: IR Remote Control driver registered, major 249
[ 6.059609] IR LIRC bridge handler initialized
[ 6.067024] tuner 1-0061: Tuner -1 found with type(s) Radio TV.
[ 6.108835] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo
f54a7800
[ 6.109060] fbcon: nouveaufb (fb0) is primary device
[ 6.124054] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder
(output 0)
[ 6.124063] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0
using output A
[ 6.125906] Console: switching to colour frame buffer device 128x48
[ 6.127234] fb0: nouveaufb frame buffer device
[ 6.127244] drm: registered panic notifier
[ 6.127262] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on
minor 0
[ 6.131047] tuner-simple 1-0061: creating new instance
[ 6.131083] tuner-simple 1-0061: type set to 5 (Philips PAL_BG (FI1216 and
compatibles))
[ 6.131917] bttv0: registered device video0
[ 6.132080] bttv0: registered device vbi0
[ 6.132179] bttv0: registered device radio0
[ 6.132216] bttv0: PLL: 28636363 => 35468950 .. ok
[ 6.216047] Registered IR keymap rc-winfast
[ 6.216247] input: bttv IR (card=34) as
/devices/pci0000:00/0000:00:1e.0/0000:03:01.0/rc/rc0/input5
[ 6.216393] rc0: bttv IR (card=34) as
/devices/pci0000:00/0000:00:1e.0/0000:03:01.0/rc/rc0
[ 8.160857] Adding 1498108k swap on /dev/sdb11. Priority:-1 extents:1
across:1498108k
[ 8.167160] EXT4-fs (sdb8): re-mounted. Opts: (null)
[ 8.317582] EXT4-fs (sdb8): re-mounted. Opts: errors=remount-ro
[ 9.328408] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.604701] e1000: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control:
RX/TX
[ 14.606751] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.365635] fuse init (API version 7.17)
[ 25.392013] eth0: no IPv6 routers present
[ 26.428178] Bluetooth: Core ver 2.16
[ 26.428940] NET: Registered protocol family 31
[ 26.429595] Bluetooth: HCI device and connection manager initialized
[ 26.430208] Bluetooth: HCI socket layer initialized
[ 26.430795] Bluetooth: L2CAP socket layer initialized
[ 26.431387] Bluetooth: SCO socket layer initialized
[ 26.447810] Bluetooth: RFCOMM TTY layer initialized
[ 26.448418] Bluetooth: RFCOMM socket layer initialized
[ 26.448841] Bluetooth: RFCOMM ver 1.11
[ 26.531059] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 26.531635] Bluetooth: BNEP filters: protocol multicast
[ 27.591668] lp0: using parport0 (interrupt-driven).
[ 27.711444] ppdev: user-space parallel port driver
[ 37.260749] EXT4-fs (sdb8): re-mounted. Opts: errors=remount-ro,commit=0
[ 138.430724] EXT4-fs (sdb5): recovery complete
[ 138.435226] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts:
(null)
** Model information
not available
** Loaded modules:
Module Size Used by
ppdev 12651 0
lp 12797 0
bnep 17288 2
rfcomm 28564 0
bluetooth 103666 10 bnep,rfcomm
rfkill 18516 2 bluetooth
mperf 12421 0
speedstep_lib 12574 0
cpufreq_userspace 12520 0
cpufreq_powersave 12422 0
cpufreq_conservative 12987 0
cpufreq_stats 12762 0
fuse 52153 1
rc_winfast 12372 0
tuner_simple 17031 1
tuner_types 12305 1 tuner_simple
ir_lirc_codec 12631 0
lirc_dev 12807 1 ir_lirc_codec
tuner 17257 1
ir_mce_kbd_decoder 12551 0
tvaudio 26237 0
ir_sony_decoder 12403 0
tda7432 12584 0
ir_jvc_decoder 12401 0
msp3400 25845 0
ir_rc6_decoder 12401 0
ir_rc5_decoder 12401 0
nouveau 470605 2
ttm 42997 1 nouveau
bttv 92480 0
ir_nec_decoder 12401 0
drm_kms_helper 22699 1 nouveau
videobuf_dma_sg 13055 1 bttv
videobuf_core 17561 2 bttv,videobuf_dma_sg
btcx_risc 12499 1 bttv
rc_core 17953 10
rc_winfast,ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,bttv,ir_nec_decoder
tveeprom 16473 1 bttv
snd_intel8x0 22372 2
v4l2_common 13054 5 tuner,tvaudio,tda7432,msp3400,bttv
drm 129839 4 nouveau,ttm,drm_kms_helper
snd_ac97_codec 84201 1 snd_intel8x0
parport_pc 22036 1
videodev 61627 6 tuner,tvaudio,tda7432,msp3400,bttv,v4l2_common
i2c_i801 12670 0
media 13692 1 videodev
i2c_algo_bit 12713 2 nouveau,bttv
iTCO_wdt 16945 0
iTCO_vendor_support 12632 1 iTCO_wdt
parport 31254 3 ppdev,lp,parport_pc
ac97_bus 12462 1 snd_ac97_codec
i2c_core 19116 14
tuner_simple,tuner,tvaudio,tda7432,msp3400,nouveau,bttv,drm_kms_helper,tveeprom,v4l2_common,drm,videodev,i2c_i801,i2c_algo_bit
snd_bt87x 13232 1
rng_core 12580 0
snd_pcm_oss 36181 0
snd_mixer_oss 17668 1 snd_pcm_oss
snd_pcm 53258 4
snd_intel8x0,snd_ac97_codec,snd_bt87x,snd_pcm_oss
mxm_wmi 12433 1 nouveau
wmi 13051 1 mxm_wmi
snd_timer 22356 1 snd_pcm
video 17412 1 nouveau
evdev 17225 0
snd 38551 13
snd_intel8x0,snd_ac97_codec,snd_bt87x,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 12921 1 snd
snd_page_alloc 12867 3 snd_intel8x0,snd_bt87x,snd_pcm
processor 27389 0
button 12817 1 nouveau
shpchp 26717 0
pcspkr 12515 0
pci_hotplug 26600 1 shpchp
thermal_sys 17752 2 video,processor
ext4 270079 2
mbcache 12897 1 ext4
jbd2 52246 1 ext4
crc16 12327 2 bluetooth,ext4
usbhid 31523 0
hid 60120 1 usbhid
sr_mod 17468 0
sd_mod 35425 4
crc_t10dif 12332 1 sd_mod
cdrom 34813 1 sr_mod
ata_generic 12439 0
ata_piix 21179 3
firewire_ohci 26662 0
uhci_hcd 22337 0
libata 124945 2 ata_generic,ata_piix
floppy 48159 0
e1000 84590 0
firewire_core 42815 1 firewire_ohci
crc_itu_t 12331 1 firewire_core
scsi_mod 135128 3 sr_mod,sd_mod,libata
ehci_hcd 35509 0
usbcore 100005 4 usbhid,uhci_hcd,ehci_hcd
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM
Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub
Interface [8086:2570]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to AGP Controller
[8086:2571] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: fb000000-fdffffff
Prefetchable memory behind bridge: d0000000-dfffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:03.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to CSA Bridge
[8086:2573] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe000000-fe0fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to
I/O Memory Interface [8086:2576] (rev 02)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation D865PERL mainboard [8086:524c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at cc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation D865PERL mainboard [8086:524c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation D865PERL mainboard [8086:524c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation D865PERL mainboard [8086:524c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2
EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation D865PERL mainboard [8086:524c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at fe200000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
c2) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: fe100000-fe1fffff
Prefetchable memory behind bridge: f0000000-f00fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation D865PERL mainboard [8086:524c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller
[8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation D865PERL mainboard [8086:524c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at ec00 [size=8]
Region 1: I/O ports at e800 [size=4]
Region 2: I/O ports at e400 [size=8]
Region 3: I/O ports at e000 [size=4]
Region 4: I/O ports at dc00 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
Controller [8086:24d3] (rev 02)
Subsystem: Intel Corporation D865PERL mainboard [8086:524c]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at c800 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER
(ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: Intel Corporation D865PERL mainboard [8086:a000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 2: Memory at fe200400 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at fe200800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44A [GeForce
6200] [10de:0221] (rev a1) (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Device [1682:2152]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 2: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at fd000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
02:01.0 Ethernet controller [0200]: Intel Corporation 82547EI Gigabit Ethernet
Controller [8086:1019]
Subsystem: Intel Corporation D865PERL mainboard [8086:301f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at bc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000
03:01.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video
Capture [109e:036e] (rev 11)
Subsystem: LeadTek Research Inc. WinFast TV 2000 [107d:6606]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f0001000 (32-bit, prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: bttv
03:01.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture
[109e:0878] (rev 11)
Subsystem: LeadTek Research Inc. Device [107d:6606]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: snd_bt87x
03:07.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev
04) (prog-if 10 [OHCI])
Subsystem: Intel Corporation D865PERL mainboard [8086:524c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3000ns min, 6000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fe100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 3.1.0-1-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.1.0-1-686-pae depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.4
ii module-init-tools 3.16-1
Versions of packages linux-image-3.1.0-1-686-pae recommends:
ii firmware-linux-free 3
ii libc6-i686 2.13-21
Versions of packages linux-image-3.1.0-1-686-pae suggests:
pn grub-pc | extlinux | lilo <none>
pn linux-doc-3.1 <none>
Versions of packages linux-image-3.1.0-1-686-pae is related to:
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-linux 0.34
pn firmware-linux-nonfree 0.34
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.1.0-1-686-pae/prerm/removing-running-kernel-3.1.0-1-686-pae:
true
linux-image-3.1.0-1-686-pae/postinst/missing-firmware-3.1.0-1-686-pae:
linux-image-3.1.0-1-686-pae/postinst/ignoring-ramdisk:
linux-image-3.1.0-1-686-pae/postinst/depmod-error-initrd-3.1.0-1-686-pae:
false
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
