This is actually my first attempt to use this adapter after digging it out of a box. I booted my box back into 2.6.32 and have the same results. All other machines in my home are on Win 7 x64 which no longer supports the adapter.
I did manage to find some WinXP x64 drivers that 7 was able to accept, and the adapter did work and get me out onto the web, but then faulted out with no apparent cause. Given the inability to get this working on my Debian machine and the lack of proper Windows drivers to validate the adapter is working I'd venture you could close this report rather than chase what may end up being a faulty adapter on my part. Thanks, Matt Goff On Thu, Nov 10, 2011 at 11:37 AM, Jonathan Nieder <jrnie...@gmail.com>wrote: > Hi, > > Matthew Goff wrote: > > > Version: 3.0.0-3 > [...] > > Please see fault in dmesg: pegasus 4-1:1.0: eth3: update_eth_regs_async, > status -22 > > Utilizing USB network adapter listed as follows: 07a6:0986 ADMtek, Inc. > AN986 Pegasus Ethernet > > > > ifconfig, ethtool, etc allow configuration of the device but no data will > > actually pass through it. I turned down the other ethernet adapters on > the > > machine and was unable to ping past the first directly connected host to > the > > Pegasus adapter. > > Thanks for reporting. > > Is this a regression? If so, what was the last working kernel version and > first broken one you found? If not, has this card worked on any other OS > before? > > Jonathan > who never had trouble with his SMC 2202USB/ETH (EZ Connect USB) using > pegasus on lenny, but is not sure where that adaptor is now >
