(cc-ing the bug log) Jean Pierre Hoareau wrote: > Hi Jonathan, > To day I have install the last version of DEBIAN WHEEZE and tested 3 > Wireless USB Adapters under Kernel linux image 3.0.0-1-686-pae: > > - Beewi BWA211-A1 > - Belkin F6D4050 V1 > - Netgear WNA 1100 > > All keys adapter work very well after installing the good firmware. > Regards and Thanks. > > Jean Pierre > > N.B Here under the log of "dmesg" for etch key.
Thanks, Jean Pierre; that's nice to hear. But have you been able to try the Realtek RTL8188S (vendor 0bda, product 8171) that was originally producing the problem? > BEEWI > [ 52.436278] usb 2-6.4: new high speed USB device number 8 using ehci_hcd > [ 52.545276] usb 2-6.4: New USB device found, idVendor=148f, > idProduct=3070 > [ 52.545278] usb 2-6.4: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [ 52.545280] usb 2-6.4: Product: 802.11 n WLAN > [ 52.545282] usb 2-6.4: Manufacturer: Ralink > [ 52.545283] usb 2-6.4: SerialNumber: 1.0 > [ 52.889605] cfg80211: Calling CRDA to update world regulatory domain > [ 52.974541] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' > [ 52.975147] Registered led device: rt2800usb-phy0::radio > [ 52.975166] Registered led device: rt2800usb-phy0::assoc > [ 52.975183] Registered led device: rt2800usb-phy0::quality > [ 52.975415] usbcore: registered new interface driver rt2800usb > [ 53.060379] udevd[540]: renamed network interface wlan0 to wlan1 > [ 53.332161] ADDRCONF(NETDEV_UP): wlan1: link is not ready > [ 56.628276] wlan1: authenticate with 00:13:f7:ca:96:03 (try 1) > [ 56.629660] wlan1: authenticated > [ 56.680274] wlan1: associate with 00:13:f7:ca:96:03 (try 1) > [ 56.683032] wlan1: RX AssocResp from 00:13:f7:ca:96:03 (capab=0x431 > status=0 aid=1) > [ 56.683035] wlan1: associated > [ 56.690637] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready > [ 56.721015] Intel AES-NI instructions are not detected. > [ 56.798815] padlock_aes: VIA PadLock not detected. > root@soleil:~# > > BEKLIN > [ 2257.108322] usb 2-6.4: new high speed USB device number 10 using ehci_hcd > [ 2257.217320] usb 2-6.4: New USB device found, idVendor=050d, > idProduct=935a > [ 2257.217322] usb 2-6.4: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [ 2257.217324] usb 2-6.4: Product: 802.11 n WLAN > [ 2257.217326] usb 2-6.4: Manufacturer: Ralink > [ 2257.217327] usb 2-6.4: SerialNumber: 1.0 > [ 2257.233880] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' > [ 2257.234339] Registered led device: rt2800usb-phy1::radio > [ 2257.234357] Registered led device: rt2800usb-phy1::assoc > [ 2257.234376] Registered led device: rt2800usb-phy1::quality > [ 2257.520416] udevd[3144]: renamed network interface wlan0 to wlan2 > [ 2257.832239] ADDRCONF(NETDEV_UP): wlan2: link is not ready > [ 2261.064194] wlan2: authenticate with 00:13:f7:ca:96:03 (try 1) > [ 2261.065704] wlan2: authenticated > [ 2261.116195] wlan2: associate with 00:13:f7:ca:96:03 (try 1) > [ 2261.119201] wlan2: RX AssocResp from 00:13:f7:ca:96:03 (capab=0x431 > status=0 aid=2) > [ 2261.119204] wlan2: associated > [ 2261.126812] ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready > > NETGEAR > [ 2412.500238] usb 2-6.4: new high speed USB device number 11 using ehci_hcd > [ 2412.608854] usb 2-6.4: New USB device found, idVendor=0846, > idProduct=9030 > [ 2412.608857] usb 2-6.4: New USB device strings: Mfr=16, Product=32, > SerialNumber=48 > [ 2412.608859] usb 2-6.4: Product: WNA1100 > [ 2412.608861] usb 2-6.4: Manufacturer: NETGEAR WNA > [ 2412.608862] usb 2-6.4: SerialNumber: 12345 > [ 2413.205357] usb 2-6.4: ath9k_htc: Transferred FW: htc_9271.fw, size: > 51272 > [ 2413.440354] ath9k_htc 2-6.4:1.0: ath9k_htc: HTC initialized with 33 > credits > [ 2413.627359] ath9k_htc 2-6.4:1.0: ath9k_htc: FW Version: 1.3 > [ 2413.627361] ath: EEPROM regdomain: 0x60 > [ 2413.627362] ath: EEPROM indicates we should expect a direct regpair map > [ 2413.627365] ath: Country alpha2 being used: 00 > [ 2413.627366] ath: Regpair used: 0x60 > [ 2413.628020] ieee80211 phy2: Atheros AR9271 Rev:1 > [ 2413.628888] Registered led device: ath9k_htc-phy2 > [ 2413.628890] usb 2-6.4: ath9k_htc: USB layer initialized > [ 2413.628907] usbcore: registered new interface driver ath9k_htc > [ 2413.778272] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 2417.344986] wlan0: authenticate with 00:13:f7:ca:96:03 (try 1) > [ 2417.346760] wlan0: authenticated > [ 2417.492111] wlan0: associate with 00:13:f7:ca:96:03 (try 1) > [ 2417.495248] wlan0: RX AssocResp from 00:13:f7:ca:96:03 (capab=0x431 > status=0 aid=3) > [ 2417.495250] wlan0: associated > [ 2417.499466] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
