On Thu, 2011-09-15 at 14:09 -0400, Andres Cimmarusti wrote: > Package: firmware-atheros > Version: 0.33 > Severity: important > > Dear Maintainer, > > This is my device: > > Bus 001 Device 003: ID 0cf3:3000 Atheros Communications, Inc. AR3011 > Bluetooth (no firmware) > > It does not turn on and kern.log shows following errors: > > [ 9.335184] ath3k_load_firmware: Can't change to loading configuration err > [ 9.335413] ath3k: probe of 1-1.3:1.0 failed with error -110 > [ 9.335459] usbcore: registered new interface driver ath3k [...]
This error message indicates a communication failure with the device after the firmware has been loaded from disk but before it has been transferred into the device. So it's not a problem with the firmware but with the driver or the hardware. Did this hardware work with a previous kernel version? Does it work with the current official kernel package (linux-image-3.0.0-1-amd64)? Ben. -- Ben Hutchings All extremists should be taken out and shot.
signature.asc
Description: This is a digitally signed message part
