Package: drbd8-utils
Version: 2:8.3.7-2.1
Severity: important
-- System Information:
Debian Release: 6.0.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages drbd8-utils depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib
drbd8-utils recommends no packages.
Versions of packages drbd8-utils suggests:
ii heartbeat 1:3.0.3-2 Subsystem for High-Availability Li
-- Configuration Files:
/etc/drbd.d/global_common.conf changed:
global {
usage-count no;
# minor-count dialog-refresh disable-ip-verification
}
common {
protocol C;
handlers {
pri-on-incon-degr "/usr/lib/drbd/notify-pri-on-incon-degr.sh;
/usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ; reboot
-f";
pri-lost-after-sb "/usr/lib/drbd/notify-pri-lost-after-sb.sh;
/usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ; reboot
-f";
local-io-error "/usr/lib/drbd/notify-io-error.sh;
/usr/lib/drbd/notify-emergency-shutdown.sh; echo o > /proc/sysrq-trigger ; halt
-f";
# fence-peer "/usr/lib/drbd/crm-fence-peer.sh";
# split-brain "/usr/lib/drbd/notify-split-brain.sh root";
# out-of-sync "/usr/lib/drbd/notify-out-of-sync.sh root";
# before-resync-target
"/usr/lib/drbd/snapshot-resync-target-lvm.sh -p 15 -- -c 16k";
# after-resync-target
/usr/lib/drbd/unsnapshot-resync-target-lvm.sh;
}
startup {
# wfc-timeout degr-wfc-timeout outdated-wfc-timeout
wait-after-sb;
wfc-timeout 30;
degr-wfc-timeout 30;
outdated-wfc-timeout 30;
#wait-after-sb 30;
}
disk {
# on-io-error fencing use-bmbv no-disk-barrier no-disk-flushes
# no-disk-drain no-md-flushes max-bio-bvecs
}
net {
# sndâbuf-size rcvbuf-size timeout connect-int ping-int
ping-timeout max-buffers
# max-epoch-size ko-count allow-two-primaries cram-hmac-alg
shared-secret
# after-sb-0pri after-sb-1pri after-sb-2pri data-integrity-alg
no-tcp-cork
}
syncer {
# rate after al-extents use-rle cpu-mask verify-alg csums-alg
}
}
/etc/init.d/drbd changed:
DEFAULTFILE="/etc/default/drbd"
DRBDADM="/sbin/drbdadm"
DRBDSETUP="/sbin/drbdsetup"
PROC_DRBD="/proc/drbd"
MODPROBE="/sbin/modprobe"
RMMOD="/sbin/rmmod"
UDEV_TIMEOUT=10
ADD_MOD_PARAM=""
if [ -f $DEFAULTFILE ]; then
. $DEFAULTFILE
fi
test -f $DRBDADM || exit 5
log_daemon_msg() { echo -n "${1:-}: ${2:-}"; }
log_end_msg() { echo "."; }
if [ -f /lib/lsb/init-functions ]; then
. /lib/lsb/init-functions
fi
function assure_module_is_loaded
{
[ -e "$PROC_DRBD" ] && return
$MODPROBE -s drbd `$DRBDADM sh-mod-parms` $ADD_MOD_PARAM || {
echo "Can not load the drbd module."$'\n'; exit 20
}
# tell klogd to reload module symbol information ...
[ -e /var/run/klogd.pid ] && [ -x /sbin/klogd ] && /sbin/klogd -i
}
function adjust_with_progress
{
IFS_O=$IFS
NEWLINE='
'
IFS=$NEWLINE
local res
COMMANDS=`$DRBDADM -d -n res adjust all` || exit 20
echo -n "[ "
for CMD in $COMMANDS; do
case "$CMD" in
res=*) eval "$CMD";;
*\ disk\ *) echo -n "d($res) " ;;
*\ syncer\ *) echo -n "s($res) " ;;
*\ net\ *) echo -n "n($res) " ;;
*) echo ".. " ;;
esac
if ! eval "$CMD"; then
echo -e "\n[$res] cmd $CMD failed - continuing!\n "
fi
done
echo -n "]"
IFS=$IFS_O
}
drbd_pretty_status()
{
local proc_drbd=$1
# add resource names
if ! type column &> /dev/null ||
! type paste &> /dev/null ||
! type join &> /dev/null ||
! type sed &> /dev/null ||
! type tr &> /dev/null
then
cat "$proc_drbd"
return
fi
sed -e '2q' < "$proc_drbd"
sed_script=$(
i=0;
_sh_status_process() {
let i++ ;
stacked=${_stacked_on:+"^^${_stacked_on_minor:-${_stacked_on//[!a-zA-Z0-9_
-]/_}}"}
printf "s|^ *%u:|%6u\t&%s%s|\n" \
$_minor $i \
"${_res_name//[!a-zA-Z0-9_ -]/_}" "$stacked"
};
eval "$(drbdadm sh-status)" )
p() {
sed -e "1,2d" \
-e "$sed_script" \
-e '/^ *[0-9]\+: cs:Unconfigured/d;' \
-e 's/^\(.* cs:.*[^ ]\) \([rs]...\)$/\1 - \2/g' \
-e 's/^\(.* \)cs:\([^ ]* \)st:\([^ ]* \)ds:\([^
]*\)/\1\2\3\4/' \
-e 's/^\(.* \)cs:\([^ ]* \)ro:\([^ ]* \)ds:\([^
]*\)/\1\2\3\4/' \
-e 's/^\(.* \)cs:\([^ ]*\)$/\1\2/' \
-e 's/^ *[0-9]\+:/ x &??not-found??/;' \
-e '/^$/d;/ns:.*nr:.*dw:/d;/resync:/d;/act_log:/d;' \
-e 's/^\(.\[.*\)\(sync.ed:\)/... ... \2/;/^.finish:/d;' \
-e 's/^\(.[0-9 %]*oos:\)/... ... \1/' \
< "$proc_drbd" | tr -s '\t ' ' '
}
m() {
join -1 2 -2 1 -o 1.1,2.2,2.3 \
<( ( drbdadm sh-dev all ; drbdadm -S sh-dev all ) | cat
-n | sort -k2,2) \
<(sort < /proc/mounts ) |
sort -n | tr -s '\t ' ' ' | sed -e 's/^ *//'
}
# echo "=== p ==="
# p
# echo "=== m ==="
# m
# echo "========="
# join -a1 <(p|sort) <(m|sort)
# echo "========="
(
echo m:res cs ro ds p mounted fstype
join -a1 <(p|sort) <(m|sort) | cut -d' ' -f2-6,8- | sort -k1,1n -k2,2
) | column -t
}
case "$1" in
start)
# Just in case drbdadm want to display any errors in the configuration
# file, or we need to ask the user about registering this installation
# at http://usage.drbd.org, we call drbdadm here without any IO
# redirection.
$DRBDADM sh-nop
log_daemon_msg "Starting DRBD resources"
assure_module_is_loaded
adjust_with_progress
# make sure udev has time to create the device files
for RESOURCE in `$DRBDADM sh-resources`; do
for DEVICE in `$DRBDADM sh-dev $RESOURCE`; do
UDEV_TIMEOUT_LOCAL=$UDEV_TIMEOUT
while [ ! -e $DEVICE ] && [ $UDEV_TIMEOUT_LOCAL -gt 0 ] ; do
sleep 1
UDEV_TIMEOUT_LOCAL=$(( $UDEV_TIMEOUT_LOCAL-1 ))
done
done
done
[ -d /var/lock/subsys ] && touch /var/lock/subsys/drbd # for RedHat
$DRBDADM wait-con-int # User interruptible version of wait-connect all
$DRBDADM sh-b-pri all # Become primary if configured
log_end_msg 0
;;
stop)
$DRBDADM sh-nop
log_daemon_msg "Stopping all DRBD resources"
if [ -e $PROC_DRBD ] ; then
# bypass drbdadm and drbd config file and everything,
# to avoid leaving devices around that are not referenced by
# the current config file, or in case the current config file
# does not parse for some reason.
for d in /dev/drbd* ; do
[ -L "$d" ] && continue
[ -b "$d" ] || continue
M=$(umount "$d" 2>&1)
case $M in
*" not mounted") :;;
*) echo "$M" >&2 ;;
esac
$DRBDSETUP "$d" down
done
$RMMOD drbd
fi
[ -f /var/lock/subsys/drbd ] && rm /var/lock/subsys/drbd
log_end_msg 0
;;
status)
# NEEDS to be heartbeat friendly...
# so: put some "OK" in the output.
if [ -e $PROC_DRBD ]; then
echo "drbd driver loaded OK; device status:"
drbd_pretty_status $PROC_DRBD 2>/dev/null
exit 0
else
echo >&2 "drbd not loaded"
exit 3
fi
;;
reload)
$DRBDADM sh-nop
log_daemon_msg "Reloading DRBD configuration"
$DRBDADM adjust all
log_end_msg 0
;;
restart|force-reload)
$DRBDADM sh-nop
log_daemon_msg "Restarting all DRBD resources"
$DRBDADM down all
$RMMOD drbd
assure_module_is_loaded
$DRBDADM up all
log_end_msg 0
;;
*)
echo "Usage: /etc/init.d/drbd
{start|stop|status|reload|restart|force-reload}"
exit 1
;;
esac
exit 0
-- no debconf information
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
