Package: nvidia-kernel-legacy-96xx-dkms
Version: 96.43.19-1
Severity: normal
Installed nvidia legacy 96xx kernel from sid and downgraded to squeeze Xorg
files as recommended.
nvidia module built with no errors. But X server does not start and log shows
errors related to
nvidia module.
-- Package-specific info:
uname -a:
Linux jasper 2.6.38-2-686 #1 SMP Sun May 8 14:49:45 UTC 2011 i686 GNU/Linux
/proc/version:
Linux version 2.6.38-2-686 (Debian 2.6.38-5) (b...@decadent.org.uk) (gcc
version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Sun May 8 14:49:45 UTC 2011
/proc/driver/nvidia/version:
NVRM version: NVIDIA Linux x86 Kernel Module 96.43.19 Wed Oct 27 19:01:34 PDT
2010
GCC version: gcc version 4.4.6 (Debian 4.4.6-3)
lspci 'VGA compatible controller [0300]':
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV18 [GeForce4 MX
440 AGP 8x] [10de:0181] (rev a2) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e4000000 (32-bit, prefetchable) [size=64M]
[virtual] Expansion ROM at e3fe0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 3.0
Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW-
Rate=x8
Kernel driver in use: nvidia
OpenGL and NVIDIA library files installed:
lrwxrwxrwx 1 root root 35 Jun 15 21:47 /etc/alternatives/libGL.so ->
/usr/lib/nvidia/diversions/libGL.so
lrwxrwxrwx 1 root root 26 Jun 15 21:57 /etc/alternatives/libGL.so.1 ->
/usr/lib/nvidia/libGL.so.1
lrwxrwxrwx 1 root root 26 Jun 15 21:47 /usr/lib/libGL.so ->
/etc/alternatives/libGL.so
lrwxrwxrwx 1 root root 28 Jun 15 21:57 /usr/lib/libGL.so.1 ->
/etc/alternatives/libGL.so.1
lrwxrwxrwx 1 root root 21 Mar 26 00:36 /usr/lib/libGLcore.so.1 ->
libGLcore.so.96.43.19
-rw-r--r-- 1 root root 8961144 Oct 27 2010 /usr/lib/libGLcore.so.96.43.19
lrwxrwxrwx 1 root root 25 Mar 26 00:36 /usr/lib/libnvidia-cfg.so.1 ->
libnvidia-cfg.so.96.43.19
-rw-r--r-- 1 root root 106308 Oct 27 2010 /usr/lib/libnvidia-cfg.so.96.43.19
lrwxrwxrwx 1 root root 25 Mar 26 00:36 /usr/lib/libnvidia-tls.so.1 ->
libnvidia-tls.so.96.43.19
-rw-r--r-- 1 root root 2352 Oct 27 2010 /usr/lib/libnvidia-tls.so.96.43.19
/usr/lib/nvidia:
total 2972
drwxr-xr-x 3 root root 4096 Jun 18 17:19 .
drwxr-xr-x 224 root root 77824 Jun 18 17:18 ..
-rwxr-xr-x 1 root root 1338 May 15 18:01
check-for-conflicting-opengl-libraries
drwxr-xr-x 2 root root 4096 Jun 18 17:19 diversions
lrwxrwxrwx 1 root root 17 Mar 26 00:36 libGL.so.1 -> libGL.so.96.43.19
-rw-r--r-- 1 root root 564468 Oct 27 2010 libGL.so.96.43.19
lrwxrwxrwx 1 root root 18 Mar 26 00:36 libglx.so -> libglx.so.96.43.19
-rw-r--r-- 1 root root 2370296 Oct 27 2010 libglx.so.96.43.19
-rwxr-xr-x 1 root root 441 May 15 18:01 pre-install
/usr/lib/nvidia/diversions:
total 732
drwxr-xr-x 2 root root 4096 Jun 18 17:19 .
drwxr-xr-x 3 root root 4096 Jun 18 17:19 ..
-rw-r--r-- 1 root root 189 Mar 21 23:38 dummy.txt
lrwxrwxrwx 1 root root 10 May 31 10:52 libGL.so -> libGL.so.1
lrwxrwxrwx 1 root root 12 May 31 10:52 libGL.so.1 -> libGL.so.1.2
-rw-r--r-- 1 root root 391152 May 31 10:52 libGL.so.1.2
-rw-r--r-- 1 root root 332448 Feb 19 06:43 libglx.so
Files from nvidia-installer:
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (999, 'testing'), (110, 'stable'), (90, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.38-2-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages nvidia-kernel-legacy-96xx-dkms depends on:
ii dkms 2.1.1.2-6 Dynamic Kernel Module Support Fram
ii nvidia-kernel-common 20110515+1 NVIDIA binary kernel module suppor
Versions of packages nvidia-kernel-legacy-96xx-dkms recommends:
ii nvidia-glx-legacy-96xx 96.43.19-1 NVIDIA binary Xorg driver (96xx le
nvidia-kernel-legacy-96xx-dkms suggests no packages.
Versions of packages nvidia-glx-legacy-96xx depends on:
ii dpkg 1.16.0.3 Debian package management system
ii libc6 2.13-4 Embedded GNU C Library: Shared lib
ii libgl1-nvidia-legacy-96xx-gl 96.43.19-1 NVIDIA binary OpenGL libraries (96
ii libglx-nvidia-alternatives 270.41.19-1 simplifies replacing Xorg module l
ii nvidia-installer-cleanup [nv 20110515+1 Cleanup after driver installation
ii nvidia-kernel-legacy-96xx-dk 96.43.19-1 NVIDIA binary kernel module DKMS s
ii xserver-xorg-core [xorg-vide 2:1.7.7-13 Xorg X server - core server
Versions of packages nvidia-glx-legacy-96xx suggests:
pn nvidia-settings <none> (no description available)
Versions of packages nvidia-kernel-legacy-96xx-source depends on:
ii debhelper 8.1.6 helper programs for debian/rules
ii make 3.81-8.1 An utility for Directing compilati
ii quilt 0.48-7 Tool to work with series of patche
Versions of packages nvidia-kernel-legacy-96xx-source recommends:
ii module-assistant 0.11.3 tool to make module package creati
ii nvidia-kernel-common 20110515+1 NVIDIA binary kernel module suppor
Versions of packages nvidia-kernel-legacy-96xx-source suggests:
ii nvidia-glx-legacy-96xx 96.43.19-1 NVIDIA binary Xorg driver (96xx le
Versions of packages nvidia-kernel-legacy-96xx-dkms is related to:
ii binutils 2.21.51.20110523-1 The GNU assembler, linker and bina
pn binutils-gold <none> (no description available)
ii linux-headers-2.6-486 2.6.38+34 Header files for Linux 2.6-486 (me
ii linux-headers-2.6-686 2.6.38+34 Header files for Linux 2.6-686 (me
ii linux-headers-2.6.32- 2.6.32-31 Header files for Linux 2.6.32-5-48
ii linux-headers-2.6.32- 2.6.32-31 Header files for Linux 2.6.32-5-68
ii linux-headers-2.6.32- 2.6.32-31 Header files for Linux 2.6.32-5-68
ii linux-headers-2.6.32- 2.6.32-31 Header files for Linux 2.6.32-5-am
ii linux-headers-2.6.32- 2.6.32-31 Header files for Linux 2.6.32-5-op
ii linux-headers-2.6.32- 2.6.32-31 Header files for Linux 2.6.32-5-vs
ii linux-headers-2.6.32- 2.6.32-31 Header files for Linux 2.6.32-5-vs
ii linux-headers-2.6.32- 2.6.32-31 Header files for Linux 2.6.32-5-xe
ii linux-headers-2.6.32- 2.6.32-31~bpo50+1 Header files for Linux 2.6.32-bpo.
ii linux-headers-2.6.32- 2.6.32-31~bpo50+1 Header files for Linux 2.6.32-bpo.
ii linux-headers-2.6.32- 2.6.32-31~bpo50+1 Header files for Linux 2.6.32-bpo.
ii linux-headers-2.6.32- 2.6.32-31~bpo50+1 Header files for Linux 2.6.32-bpo.
ii linux-headers-2.6.32- 2.6.32-31~bpo50+1 Header files for Linux 2.6.32-bpo.
ii linux-headers-2.6.32- 2.6.32-31~bpo50+1 Header files for Linux 2.6.32-bpo.
ii linux-headers-2.6.32- 2.6.32-31~bpo50+1 Header files for Linux 2.6.32-bpo.
ii linux-headers-2.6.32- 2.6.32-31~bpo50+1 Header files for Linux 2.6.32-bpo.
ii linux-headers-2.6.38- 2.6.38-5 Header files for Linux 2.6.38-2-48
ii linux-headers-2.6.38- 2.6.38-5 Header files for Linux 2.6.38-2-68
ii nvidia-glx-legacy-96x 96.43.19-1 NVIDIA binary Xorg driver (96xx le
ii nvidia-kernel-common 20110515+1 NVIDIA binary kernel module suppor
ii nvidia-kernel-legacy- 96.43.19-1 NVIDIA binary kernel module DKMS s
ii nvidia-kernel-legacy- 96.43.19-1 NVIDIA binary kernel module source
ii xserver-xorg 1:7.5+8 the X.Org X server
ii xserver-xorg-core 2:1.7.7-13 Xorg X server - core server
-- no debconf information
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.29-dsa-ia32 i686 Debian
Current Operating System: Linux jasper 2.6.38-2-686 #1 SMP Sun May 8 14:49:45
UTC 2011 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-686
root=UUID=67263127-db2a-4df3-a15a-f2402f41f6cf ro vga=771 quiet
Build Date: 19 February 2011 02:37:36PM
xorg-server 2:1.7.7-13 (Cyril Brulebois <k...@debian.org>)
Current version of pixman: 0.21.8
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 18 17:21:28 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse'
will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x81ecca0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0181:0000:0000 nVidia Corporation NV18 [GeForce4 MX
440 AGP 8x] rev 162, Mem @ 0xe2000000/16777216, 0xe4000000/67108864, BIOS @
0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 96.43.19 Wed Oct 27 19:20:11 PDT 2010
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 96.43.19 Wed Oct 27 19:07:40 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce4 MX 440 with AGP8X at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 65536 kBytes
(--) NVIDIA(0): VideoBIOS: 04.18.20.13.0e
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce4 MX 440 with AGP8X at
(--) NVIDIA(0): PCI:1:0:0:
(--) NVIDIA(0): Samsung SyncMaster (CRT-0)
(--) NVIDIA(0): Samsung SyncMaster (CRT-0): 350.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(WW) NVIDIA(0):
(WW) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(WW) NVIDIA(0): will be used as the requested mode.
(WW) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
(--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) NVIDIA(0): Initialized GART.
(EE) NVIDIA(0): Failed to allocate/map the primary surface!
Fatal server error:
AddScreen/ScreenInit failed for driver 0
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional
information.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-2-686 (Debian 2.6.38-5) (b...@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Sun May 8 14:49:45 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
[ 0.000000] BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: System Manufacturer System Name/P4G8X , BIOS ASUS P4G8X ACPI BIOS Revision 1003 12/12/2002
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x1fffc max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 100000000 mask F00000000 write-back
[ 0.000000] 2 base 200000000 mask E00000000 write-back
[ 0.000000] 3 base 400000000 mask C00000000 write-back
[ 0.000000] 4 base 800000000 mask 800000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000020000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-000000001fffc000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001fc00000 page 2M
[ 0.000000] 001fc00000 - 001fffc000 page 4k
[ 0.000000] kernel direct mapping tables up to 1fffc000 @ 17fb000-1800000
[ 0.000000] RAMDISK: 1ef4d000 - 1f826000
[ 0.000000] ACPI: RSDP 000f51e0 00014 (v00 ASUS )
[ 0.000000] ACPI: RSDT 1fffc000 00030 (v01 ASUS P4G8X 42302E31 MSFT 31313031)
[ 0.000000] ACPI: FACP 1fffc0c0 00074 (v01 ASUS P4G8X 42302E31 MSFT 31313031)
[ 0.000000] ACPI: DSDT 1fffc134 027F5 (v01 ASUS P4G8X 00001000 MSFT 0100000B)
[ 0.000000] ACPI: FACS 1ffff000 00040
[ 0.000000] ACPI: BOOT 1fffc030 00028 (v01 ASUS P4G8X 42302E31 MSFT 31313031)
[ 0.000000] ACPI: APIC 1fffc058 0005A (v01 ASUS P4G8X 42302E31 MSFT 31313031)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fffc000
[ 0.000000] low ram: 0 - 1fffc000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001fffc
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001fffc
[ 0.000000] On node 0 totalpages: 130955
[ 0.000000] free_area_init_node: node 0, pgdat c13ea5c0, node_mem_map dfbfb200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125980 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @de800000 s27136 r0 d22016 u4194304
[ 0.000000] pcpu-alloc: s27136 r0 d22016 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129931
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-686 root=UUID=67263127-db2a-4df3-a15a-f2402f41f6cf ro vga=771 quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 505160k/524272k available (2646k kernel code, 18660k reserved, 1389k data, 392k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xe07fc000 - 0xff7fe000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdfffc000 ( 511 MB)
[ 0.000000] .init : 0xc13f1000 - 0xc1453000 ( 392 kB)
[ 0.000000] .data : 0xc12959e4 - 0xc13f0e80 (1389 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12959e4 (2646 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] CPU 0 irqstacks, hard=de41a000 soft=de41c000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2666.460 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.92 BogoMIPS (lpj=10665840)
[ 0.004010] pid_max: default: 32768 minimum: 301
[ 0.004094] Security Framework initialized
[ 0.004101] SELinux: Disabled at boot.
[ 0.004137] Mount-cache hash table entries: 512
[ 0.004491] Initializing cgroup subsys ns
[ 0.004496] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.004500] Initializing cgroup subsys cpuacct
[ 0.004528] Initializing cgroup subsys devices
[ 0.004531] Initializing cgroup subsys freezer
[ 0.004534] Initializing cgroup subsys net_cls
[ 0.004537] Initializing cgroup subsys blkio
[ 0.004596] CPU0: Hyper-Threading is disabled
[ 0.004601] mce: CPU supports 4 MCE banks
[ 0.004616] CPU0: Thermal monitoring enabled (TM1)
[ 0.005142] SMP alternatives: switching to UP code
[ 0.012546] Freeing SMP alternatives: 16k freed
[ 0.012560] ACPI: Core revision 20110112
[ 0.014126] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.014427] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054119] CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 09
[ 0.056003] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.056003] ... version: 0
[ 0.056003] ... bit width: 40
[ 0.056003] ... generic registers: 18
[ 0.056003] ... value mask: 000000ffffffffff
[ 0.056003] ... max period: 0000007fffffffff
[ 0.056003] ... fixed-purpose events: 0
[ 0.056003] ... event mask: 000000000003ffff
[ 0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.056003] Brought up 1 CPUs
[ 0.056003] Total of 1 processors activated (5332.92 BogoMIPS).
[ 0.056003] devtmpfs: initialized
[ 0.056003] print_constraints: dummy:
[ 0.056003] NET: Registered protocol family 16
[ 0.056003] ACPI: bus type pci registered
[ 0.056003] PCI: PCI BIOS revision 2.10 entry at 0xf1db0, last bus=2
[ 0.056003] PCI: Using configuration type 1 for base access
[ 0.056165] bio: create slab <bio-0> at 0
[ 0.056817] ACPI: EC: Look up EC in DSDT
[ 0.060833] ACPI: Interpreter enabled
[ 0.060843] ACPI: (supports S0 S1 S4 S5)
[ 0.060866] ACPI: Using IOAPIC for interrupt routing
[ 0.068117] ACPI: No dock devices found.
[ 0.068120] HEST: Table not found.
[ 0.068126] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.068215] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.068402] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.068406] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.068410] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.068414] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
[ 0.068417] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
[ 0.068434] pci 0000:00:00.0: [8086:255d] type 0 class 0x000600
[ 0.068444] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf3ffffff pref]
[ 0.068492] pci 0000:00:01.0: [8086:2552] type 1 class 0x000604
[ 0.068502] pci 0000:00:01.0: reg 10: [mem 0xe8000000-0xebffffff pref]
[ 0.068559] pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03
[ 0.068606] pci 0000:00:1d.0: reg 20: [io 0xd800-0xd81f]
[ 0.068643] pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03
[ 0.068689] pci 0000:00:1d.1: reg 20: [io 0xd400-0xd41f]
[ 0.068726] pci 0000:00:1d.2: [8086:24c7] type 0 class 0x000c03
[ 0.068772] pci 0000:00:1d.2: reg 20: [io 0xd000-0xd01f]
[ 0.068820] pci 0000:00:1d.7: [8086:24cd] type 0 class 0x000c03
[ 0.068843] pci 0000:00:1d.7: reg 10: [mem 0xe1800000-0xe18003ff]
[ 0.068926] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.068932] pci 0000:00:1d.7: PME# disabled
[ 0.068953] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.068999] pci 0000:00:1f.0: [8086:24c0] type 0 class 0x000601
[ 0.069004] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 0.069005] * this clock source is slow. If you are sure your timer does not have
[ 0.069007] * this bug, please use "acpi_pm_good" to disable the workaround
[ 0.069074] pci 0000:00:1f.0: Enabled i801 SMBus device
[ 0.069082] pci 0000:00:1f.0: quirk: [io 0xe400-0xe47f] claimed by ICH4 ACPI/GPIO/TCO
[ 0.069088] pci 0000:00:1f.0: quirk: [io 0xec00-0xec3f] claimed by ICH4 GPIO
[ 0.069105] pci 0000:00:1f.1: [8086:24cb] type 0 class 0x000101
[ 0.069120] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.069131] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.069142] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.069153] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.069164] pci 0000:00:1f.1: reg 20: [io 0xf000-0xf00f]
[ 0.069175] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[ 0.069206] pci 0000:00:1f.3: [8086:24c3] type 0 class 0x000c05
[ 0.069253] pci 0000:00:1f.3: reg 20: [io 0xe800-0xe81f]
[ 0.069293] pci 0000:00:1f.5: [8086:24c5] type 0 class 0x000401
[ 0.069310] pci 0000:00:1f.5: reg 10: [io 0x9800-0x98ff]
[ 0.069321] pci 0000:00:1f.5: reg 14: [io 0x9400-0x943f]
[ 0.069331] pci 0000:00:1f.5: reg 18: [mem 0xdf000000-0xdf0001ff]
[ 0.069341] pci 0000:00:1f.5: reg 1c: [mem 0xde800000-0xde8000ff]
[ 0.069382] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.069387] pci 0000:00:1f.5: PME# disabled
[ 0.069416] pci 0000:01:00.0: [10de:0181] type 0 class 0x000300
[ 0.069432] pci 0000:01:00.0: reg 10: [mem 0xe2000000-0xe2ffffff]
[ 0.069442] pci 0000:01:00.0: reg 14: [mem 0xe4000000-0xe7ffffff pref]
[ 0.069473] pci 0000:01:00.0: reg 30: [mem 0xe3fe0000-0xe3ffffff pref]
[ 0.069525] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.069530] pci 0000:00:01.0: bridge window [io 0xe000-0xd000] (disabled)
[ 0.069534] pci 0000:00:01.0: bridge window [mem 0xe2000000-0xe3dfffff]
[ 0.069539] pci 0000:00:01.0: bridge window [mem 0xe3f00000-0xe7ffffff pref]
[ 0.069568] pci 0000:02:03.0: [104c:8023] type 0 class 0x000c00
[ 0.069586] pci 0000:02:03.0: reg 10: [mem 0xe1000000-0xe10007ff]
[ 0.069597] pci 0000:02:03.0: reg 14: [mem 0xe0800000-0xe0803fff]
[ 0.069655] pci 0000:02:03.0: supports D1 D2
[ 0.069658] pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.069663] pci 0000:02:03.0: PME# disabled
[ 0.069681] pci 0000:02:04.0: [1095:3112] type 0 class 0x000104
[ 0.069698] pci 0000:02:04.0: reg 10: [io 0xb800-0xb807]
[ 0.069708] pci 0000:02:04.0: reg 14: [io 0xb400-0xb403]
[ 0.069718] pci 0000:02:04.0: reg 18: [io 0xb000-0xb007]
[ 0.069729] pci 0000:02:04.0: reg 1c: [io 0xa800-0xa803]
[ 0.069739] pci 0000:02:04.0: reg 20: [io 0xa400-0xa40f]
[ 0.069749] pci 0000:02:04.0: reg 24: [mem 0xe0000000-0xe00001ff]
[ 0.069760] pci 0000:02:04.0: reg 30: [mem 0xe3e80000-0xe3efffff pref]
[ 0.069778] pci 0000:02:04.0: supports D1 D2
[ 0.069807] pci 0000:02:05.0: [14e4:16a6] type 0 class 0x000200
[ 0.069831] pci 0000:02:05.0: reg 10: [mem 0xdf800000-0xdf80ffff 64bit]
[ 0.069875] pci 0000:02:05.0: reg 30: [mem 0xe3e70000-0xe3e7ffff pref]
[ 0.069905] pci 0000:02:05.0: PME# supported from D3hot D3cold
[ 0.069910] pci 0000:02:05.0: PME# disabled
[ 0.069952] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.069958] pci 0000:00:1e.0: bridge window [io 0xa000-0xbfff]
[ 0.069963] pci 0000:00:1e.0: bridge window [mem 0xdf800000-0xe17fffff]
[ 0.069969] pci 0000:00:1e.0: bridge window [mem 0xe3e00000-0xe3efffff pref]
[ 0.069972] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.069976] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.069988] pci_bus 0000:00: on NUMA node 0
[ 0.069993] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.070067] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.070108] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 0.072189] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.072273] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.072354] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.072435] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.072504] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.072589] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.072658] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.072740] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.072868] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.072873] vgaarb: loaded
[ 0.072923] PCI: Using ACPI for IRQ routing
[ 0.072928] PCI: pci_cache_line_size set to 64 bytes
[ 0.072988] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.072991] reserve RAM buffer: 000000001fffc000 - 000000001fffffff
[ 0.074843] pnp: PnP ACPI init
[ 0.074874] ACPI: bus type pnp registered
[ 0.074995] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.074999] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.075002] pnp 00:00: [mem 0x00100000-0x1fffffff]
[ 0.075005] pnp 00:00: [mem 0xfec00000-0xfec000ff]
[ 0.075008] pnp 00:00: [mem 0xfee00000-0xfee00fff]
[ 0.075089] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.075094] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.075098] system 00:00: [mem 0x00100000-0x1fffffff] could not be reserved
[ 0.075102] system 00:00: [mem 0xfec00000-0xfec000ff] could not be reserved
[ 0.075106] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.075111] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.075394] pnp 00:01: [bus 00-ff]
[ 0.075398] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.075401] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.075404] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.075408] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.075411] pnp 00:01: [mem 0x000c8000-0x000dffff window]
[ 0.075414] pnp 00:01: [mem 0x20000000-0xfebfffff window]
[ 0.075473] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.075521] pnp 00:02: [io 0xe400-0xe47f]
[ 0.075524] pnp 00:02: [io 0xe800-0xe81f]
[ 0.075527] pnp 00:02: [io 0xec00-0xec3f]
[ 0.075529] pnp 00:02: [io 0x04d6]
[ 0.075532] pnp 00:02: [mem 0xfff80000-0xffffffff]
[ 0.075535] pnp 00:02: [mem 0xffb80000-0xffbfffff]
[ 0.075596] system 00:02: [io 0xe400-0xe47f] has been reserved
[ 0.075600] system 00:02: [io 0xe800-0xe81f] has been reserved
[ 0.075604] system 00:02: [io 0xec00-0xec3f] has been reserved
[ 0.075607] system 00:02: [io 0x04d6] has been reserved
[ 0.075611] system 00:02: [mem 0xfff80000-0xffffffff] could not be reserved
[ 0.075615] system 00:02: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.075619] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.075648] pnp 00:03: [io 0x0010-0x001f]
[ 0.075652] pnp 00:03: [io 0x0022-0x002d]
[ 0.075654] pnp 00:03: [io 0x0030-0x003f]
[ 0.075657] pnp 00:03: [io 0x0044-0x005f]
[ 0.075659] pnp 00:03: [io 0x0062-0x0063]
[ 0.075662] pnp 00:03: [io 0x0065-0x006f]
[ 0.075665] pnp 00:03: [io 0x0074-0x007f]
[ 0.075667] pnp 00:03: [io 0x0091-0x0093]
[ 0.075670] pnp 00:03: [io 0x00a2-0x00bf]
[ 0.075672] pnp 00:03: [io 0x00e0-0x00ef]
[ 0.075675] pnp 00:03: [io 0x04d0-0x04d1]
[ 0.075745] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.075750] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.075805] pnp 00:04: [dma 4]
[ 0.075812] pnp 00:04: [io 0x0000-0x000f]
[ 0.075815] pnp 00:04: [io 0x0080-0x0090]
[ 0.075817] pnp 00:04: [io 0x0094-0x009f]
[ 0.075820] pnp 00:04: [io 0x00c0-0x00df]
[ 0.075860] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.075876] pnp 00:05: [io 0x0070-0x0073]
[ 0.075893] pnp 00:05: [irq 8]
[ 0.075935] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.075948] pnp 00:06: [io 0x0061]
[ 0.075994] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.076034] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.076040] pnp 00:07: [irq 13]
[ 0.076083] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.076360] pnp 00:08: [io 0x03f2-0x03f5]
[ 0.076363] pnp 00:08: [io 0x03f7]
[ 0.076369] pnp 00:08: [irq 6]
[ 0.076372] pnp 00:08: [dma 2]
[ 0.076433] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.077195] pnp 00:09: [io 0x0378-0x037f]
[ 0.077199] pnp 00:09: [io 0x0778-0x077b]
[ 0.077205] pnp 00:09: [irq 7]
[ 0.077208] pnp 00:09: [dma 3]
[ 0.077296] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.077821] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.077828] pnp 00:0a: [irq 4]
[ 0.077901] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.078471] pnp 00:0b: [io 0x02f8-0x02ff]
[ 0.078477] pnp 00:0b: [irq 3]
[ 0.078551] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.078859] pnp 00:0c: [io 0x0060]
[ 0.078863] pnp 00:0c: [io 0x0064]
[ 0.078869] pnp 00:0c: [irq 1]
[ 0.078918] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.079478] pnp 00:0d: [io 0x0330-0x0331]
[ 0.079485] pnp 00:0d: [irq 10]
[ 0.079551] pnp 00:0d: Plug and Play ACPI device, IDs PNPb006 (active)
[ 0.080050] pnp 00:0e: [io 0x0200-0x0207]
[ 0.080111] pnp 00:0e: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.080139] pnp 00:0f: [io 0x002e-0x002f]
[ 0.080142] pnp 00:0f: [io 0x03f0-0x03f1]
[ 0.080209] system 00:0f: [io 0x03f0-0x03f1] has been reserved
[ 0.080214] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.080230] pnp: PnP ACPI: found 16 devices
[ 0.080232] ACPI: ACPI bus type pnp unregistered
[ 0.080238] PnPBIOS: Disabled by ACPI PNP
[ 0.117730] Switching to clocksource acpi_pm
[ 0.117783] pci 0000:00:1f.1: BAR 5: assigned [mem 0x20000000-0x200003ff]
[ 0.117792] pci 0000:00:1f.1: BAR 5: set to [mem 0x20000000-0x200003ff] (PCI address [0x20000000-0x200003ff])
[ 0.117796] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.117799] pci 0000:00:01.0: bridge window [io disabled]
[ 0.117804] pci 0000:00:01.0: bridge window [mem 0xe2000000-0xe3dfffff]
[ 0.117809] pci 0000:00:01.0: bridge window [mem 0xe3f00000-0xe7ffffff pref]
[ 0.117816] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[ 0.117820] pci 0000:00:1e.0: bridge window [io 0xa000-0xbfff]
[ 0.117827] pci 0000:00:1e.0: bridge window [mem 0xdf800000-0xe17fffff]
[ 0.117833] pci 0000:00:1e.0: bridge window [mem 0xe3e00000-0xe3efffff pref]
[ 0.117851] pci 0000:00:01.0: setting latency timer to 64
[ 0.117860] pci 0000:00:1e.0: setting latency timer to 64
[ 0.117865] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.117868] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.117872] pci_bus 0000:01: resource 1 [mem 0xe2000000-0xe3dfffff]
[ 0.117875] pci_bus 0000:01: resource 2 [mem 0xe3f00000-0xe7ffffff pref]
[ 0.117879] pci_bus 0000:02: resource 0 [io 0xa000-0xbfff]
[ 0.117882] pci_bus 0000:02: resource 1 [mem 0xdf800000-0xe17fffff]
[ 0.117886] pci_bus 0000:02: resource 2 [mem 0xe3e00000-0xe3efffff pref]
[ 0.117889] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.117893] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.117966] NET: Registered protocol family 2
[ 0.118078] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.118361] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.118458] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.118548] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.118552] TCP reno registered
[ 0.118556] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.118565] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.118755] NET: Registered protocol family 1
[ 0.118870] pci 0000:01:00.0: Boot video device
[ 0.118881] PCI: CLS 32 bytes, default 64
[ 0.118961] Unpacking initramfs...
[ 0.118961] Switched to NOHz mode on CPU #0
[ 0.475778] Freeing initrd memory: 9060k freed
[ 0.488527] Simple Boot Flag at 0x3a set to 0x1
[ 0.489006] audit: initializing netlink socket (disabled)
[ 0.489029] type=2000 audit(1308442866.488:1): initialized
[ 0.498111] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.500443] VFS: Disk quotas dquot_6.5.2
[ 0.500577] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.500745] msgmni has been set to 1004
[ 0.501036] alg: No test for stdrng (krng)
[ 0.501116] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.501122] io scheduler noop registered
[ 0.501124] io scheduler deadline registered
[ 0.501140] io scheduler cfq registered (default)
[ 0.501474] vesafb: framebuffer at 0xe4000000, mapped to 0xe0880000, using 512k, total 512k
[ 0.501478] vesafb: mode is 800x600x8, linelength=800, pages=0
[ 0.501481] vesafb: scrolling: redraw
[ 0.501484] vesafb: Pseudocolor: size=0:6:6:6, shift=0:0:0:0
[ 0.508690] Console: switching to colour frame buffer device 100x37
[ 0.515627] fb0: VESA VGA frame buffer device
[ 0.515702] ERST: Table is not found!
[ 0.515726] isapnp: Scanning for PnP cards...
[ 0.826070] isapnp: No Plug & Play device found
[ 0.826166] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.846526] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.866893] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.887532] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.907939] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.908222] Linux agpgart interface v0.103
[ 0.908355] agpgart-intel 0000:00:00.0: Intel E7205 Chipset
[ 0.911270] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf0000000
[ 0.911459] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.911463] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.912597] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.912747] mousedev: PS/2 mouse device common for all mice
[ 0.912809] rtc_cmos 00:05: RTC can wake from S4
[ 0.912871] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.912896] rtc0: alarms up to one month, 242 bytes nvram
[ 0.912911] cpuidle: using governor ladder
[ 0.912914] cpuidle: using governor menu
[ 0.913269] TCP cubic registered
[ 0.913457] NET: Registered protocol family 10
[ 0.914274] Mobile IPv6
[ 0.914279] NET: Registered protocol family 17
[ 0.914284] Registering the dns_resolver key type
[ 0.914316] Using IPI No-Shortcut mode
[ 0.914458] PM: Hibernation image not present or could not be loaded.
[ 0.914474] registered taskstats version 1
[ 0.914715] rtc_cmos 00:05: setting system clock to 2011-06-19 00:21:07 UTC (1308442867)
[ 0.914755] Initalizing network drop monitor service
[ 0.914839] Freeing unused kernel memory: 392k freed
[ 0.915308] Write protecting the kernel text: 2648k
[ 0.915328] Write protecting the kernel read-only data: 1000k
[ 0.936898] <30>udevd[46]: starting version 170
[ 0.941701] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.143996] Floppy drive(s): fd0 is 1.44M
[ 1.179658] firewire_ohci 0000:02:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.197530] FDC 0 is a post-1991 82077
[ 1.232180] firewire_ohci: Added fw-ohci device 0000:02:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.246260] tg3.c:v3.116 (December 3, 2010)
[ 1.246286] tg3 0000:02:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.298156] tg3 0000:02:05.0: eth0: Tigon3 [partno(BCM95702A20) rev 1002] (PCI:33MHz:32-bit) MAC address 00:0c:6e:15:0d:e2
[ 1.298163] tg3 0000:02:05.0: eth0: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.298168] tg3 0000:02:05.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.298173] tg3 0000:02:05.0: eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
[ 1.301590] usbcore: registered new interface driver usbfs
[ 1.301813] usbcore: registered new interface driver hub
[ 1.301882] usbcore: registered new device driver usb
[ 1.309644] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.309698] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.309726] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.309731] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.309763] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.309807] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.313707] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.315950] SCSI subsystem initialized
[ 1.333890] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe1800000
[ 1.340063] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.363986] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.365661] libata version 3.00 loaded.
[ 1.374126] sata_sil 0000:02:04.0: version 2.4
[ 1.374181] sata_sil 0000:02:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.374827] scsi0 : sata_sil
[ 1.375041] scsi1 : sata_sil
[ 1.375117] ata1: SATA max UDMA/100 mmio m512@0xe0000000 tf 0xe0000080 irq 21
[ 1.375121] ata2: SATA max UDMA/100 mmio m512@0xe0000000 tf 0xe00000c0 irq 21
[ 1.375516] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.375521] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.375524] usb usb1: Product: EHCI Host Controller
[ 1.375527] usb usb1: Manufacturer: Linux 2.6.38-2-686 ehci_hcd
[ 1.375529] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.375798] hub 1-0:1.0: USB hub found
[ 1.375807] hub 1-0:1.0: 6 ports detected
[ 1.375944] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.375956] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.375961] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.375972] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.376054] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800
[ 1.376098] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.376102] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.376105] usb usb2: Product: UHCI Host Controller
[ 1.376108] usb usb2: Manufacturer: Linux 2.6.38-2-686 uhci_hcd
[ 1.376110] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.376259] hub 2-0:1.0: USB hub found
[ 1.376275] hub 2-0:1.0: 2 ports detected
[ 1.376371] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.376380] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.376384] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.376394] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.376428] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d400
[ 1.376468] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.376472] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.376475] usb usb3: Product: UHCI Host Controller
[ 1.376478] usb usb3: Manufacturer: Linux 2.6.38-2-686 uhci_hcd
[ 1.376480] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.376628] hub 3-0:1.0: USB hub found
[ 1.376634] hub 3-0:1.0: 2 ports detected
[ 1.376719] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.376728] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.376732] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.376744] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.376778] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[ 1.376822] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.376826] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.376829] usb usb4: Product: UHCI Host Controller
[ 1.376832] usb usb4: Manufacturer: Linux 2.6.38-2-686 uhci_hcd
[ 1.376835] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.376969] hub 4-0:1.0: USB hub found
[ 1.376975] hub 4-0:1.0: 2 ports detected
[ 1.377414] ata_piix 0000:00:1f.1: version 2.13
[ 1.377431] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.377495] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.378726] scsi2 : ata_piix
[ 1.378922] scsi3 : ata_piix
[ 1.379508] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.379513] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.496037] Refined TSC clocksource calibration: 2666.761 MHz.
[ 1.496043] Switching to clocksource tsc
[ 1.536655] ata4.00: ATAPI: HL-DT-ST GCE-8525B, 1.00, max UDMA/33
[ 1.545256] ata3.00: ATA-6: WDC WD800JB-00ETA0, 77.07W77, max UDMA/100
[ 1.545260] ata3.00: 156301488 sectors, multi 16: LBA48
[ 1.552312] ata4.00: configured for UDMA/33
[ 1.561149] ata3.00: configured for UDMA/100
[ 1.696026] ata1: SATA link down (SStatus 0 SControl 310)
[ 1.732145] firewire_core: created device fw0: GUID 00e0180000168351, S400
[ 1.740034] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 1.873352] usb 1-4: New USB device found, idVendor=1058, idProduct=1101
[ 1.873357] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.873360] usb 1-4: Product: My Book
[ 1.873364] usb 1-4: Manufacturer: Western Digital
[ 1.873367] usb 1-4: SerialNumber: 57442D574341505734363136343438
[ 2.016027] ata2: SATA link down (SStatus 0 SControl 310)
[ 2.016207] scsi 2:0:0:0: Direct-Access ATA WDC WD800JB-00ET 77.0 PQ: 0 ANSI: 5
[ 2.016857] scsi 3:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8525B 1.00 PQ: 0 ANSI: 5
[ 2.072776] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.072851] sd 2:0:0:0: [sda] Write Protect is off
[ 2.072855] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.072886] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.074613] usbcore: registered new interface driver uas
[ 2.076150] sr0: scsi3-mmc drive: 40x/52x writer cd/rw xa/form2 cdda tray
[ 2.076155] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.076319] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.112026] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 2.119593] sda: sda1 sda2 < sda5 sda6 >
[ 2.120265] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.148413] Initializing USB Mass Storage driver...
[ 2.154564] scsi4 : usb-storage 1-4:1.0
[ 2.155801] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.156553] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 2.158013] usbcore: registered new interface driver usb-storage
[ 2.158018] USB Mass Storage support registered.
[ 2.160431] input: Western Digital My Book as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.1/input/input1
[ 2.160584] generic-usb 0003:1058:1101.0001: input,hidraw0: USB HID v1.10 Device [Western Digital My Book ] on usb-0000:00:1d.7-4/input1
[ 2.160865] usbcore: registered new interface driver usbhid
[ 2.160869] usbhid: USB HID core driver
[ 2.279954] usb 2-1: New USB device found, idVendor=1267, idProduct=0201
[ 2.279960] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.279964] usb 2-1: Product: PS/2+USB Mouse
[ 2.298398] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
[ 2.298540] generic-usb 0003:1267:0201.0002: input,hidraw1: USB HID v1.10 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-1/input0
[ 2.547166] PM: Starting manual resume from disk
[ 2.547173] PM: Hibernation image partition 8:5 present
[ 2.547175] PM: Looking for hibernation image.
[ 2.547410] PM: Image not found (code -22)
[ 2.547413] PM: Hibernation image not present or could not be loaded.
[ 2.578618] EXT3-fs: barriers not enabled
[ 2.589426] kjournald starting. Commit interval 5 seconds
[ 2.589453] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 3.156790] scsi 4:0:0:0: Direct-Access WD 5000AAJ External 1.65 PQ: 0 ANSI: 0
[ 3.157570] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 3.158024] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.158769] sd 4:0:0:0: [sdb] Write Protect is off
[ 3.158773] sd 4:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 3.159518] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 3.159647] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.162017] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 3.162140] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.819864] <30>udevd[228]: starting version 170
[ 4.762357] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 4.762366] ACPI: Power Button [PWRB]
[ 4.762475] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.762480] ACPI: Power Button [PWRF]
[ 4.994346] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.223341] ACPI: acpi_idle registered with cpuidle
[ 5.223386] ACPI: Invalid PBLK length [5]
[ 5.415415] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.438692] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.080441] sdb: sdb1
[ 10.084127] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 10.084258] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 10.084392] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 10.129575] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 10.150332] parport_pc 00:09: reported by Plug and Play ACPI
[ 10.150397] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 10.266647] intel_rng: FWH not detected
[ 10.269136] gameport gameport0: NS558 PnP Gameport is pnp00:0e/gameport0, io 0x200, speed 784kHz
[ 10.836510] Disabling lock debugging due to kernel taint
[ 10.836521] nvidia: module license 'NVIDIA' taints kernel.
[ 11.305854] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.305867] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 11.306600] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.19 Wed Oct 27 19:01:34 PDT 2010
[ 11.356717] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 11.356764] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 11.680031] intel8x0_measure_ac97_clock: measured 52569 usecs (2533 samples)
[ 11.680037] intel8x0: clocking to 48000
[ 12.129917] Adding 1510072k swap on /dev/sda5. Priority:-1 extents:1 across:1510072k
[ 12.466934] EXT3-fs (sda1): using internal journal
[ 12.679207] loop: module loaded
[ 13.244587] EXT3-fs: barriers not enabled
[ 13.244775] kjournald starting. Commit interval 5 seconds
[ 13.245196] EXT3-fs (sda6): using internal journal
[ 13.245202] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 14.258436] fuse init (API version 7.16)
[ 15.265049] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.900028] tg3 0000:02:05.0: eth0: Link is up at 100 Mbps, full duplex
[ 16.900034] tg3 0000:02:05.0: eth0: Flow control is on for TX and on for RX
[ 16.900083] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 25.381583] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 25.381601] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[ 25.381637] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
[ 25.903013] Xorg:1031 conflicting memory types e4000000-e4570000 uncached-minus<->write-combining
[ 25.903019] reserve_memtype failed 0xe4000000-0xe4570000, track write-combining, req write-combining
[ 25.904355] Xorg:1031 conflicting memory types e4000000-e4570000 uncached-minus<->write-combining
[ 25.904360] reserve_memtype failed 0xe4000000-0xe4570000, track write-combining, req write-combining
