Package: linux-2.6
Version: 2.6.38-3
Severity: normal
Hi,
I have Debian testing on an Acer Aspire 5610. The acer-wmi module was always
loaded automatically, without me having to do something. after an upgrade to
2.6.38, i noticed that i could no longer turn my wireless on and off via
/sys/devices/platform/acer-wmi/rfkill0/state, however, after modprobe acer-wmi,
everything still works fine. so the only problem is that the module is not
loaded by default, as it was with the previous kernel, and as it should be on
acer hardware i think.
btw it's not blacklisted
tell me in case you need more information,
greetings
andreas
-- Package-specific info:
** Version:
Linux version 2.6.38-2-686 (Debian 2.6.38-3) (b...@decadent.org.uk) (gcc
version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 05:24:21 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.38-2-686 root=/dev/mapper/aspire-lv1 ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[93916.472034] wlan0: no IPv6 routers present
[95276.916675] wlan0: deauthenticating from 00:01:e3:e5:8a:36 by local choice
(reason=3)
[95276.956685] cfg80211: Calling CRDA for country: AT
[95277.028257] b44 ssb0:0: eth0: powering down PHY
[95277.492725] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[95277.492733] PM: Basic memory bitmaps created
[95277.492735] PM: Syncing filesystems ... done.
[95277.513970] Freezing user space processes ... (elapsed 0.01 seconds) done.
[95277.528111] Freezing remaining freezable tasks ... (elapsed 0.01 seconds)
done.
[95277.544186] PM: Preallocating image memory... done (allocated 280983 pages)
[95279.204363] PM: Allocated 1123932 kbytes in 1.66 seconds (677.06 MB/s)
[95279.204367] Suspending console(s) (use no_console_suspend to debug)
[95279.252684] ACPI handle has no context!
[95279.252695] sdhci-pci 0000:06:04.4: PCI INT B disabled
[95279.252703] ACPI handle has no context!
[95279.252809] ACPI handle has no context!
[95279.252815] sdhci-pci 0000:06:04.2: PCI INT B disabled
[95279.252823] ACPI handle has no context!
[95279.252907] b44 0000:06:01.0: PCI INT A disabled
[95279.252997] pci 0000:00:1f.3: PCI INT B disabled
[95279.356125] HDA Intel 0000:00:1b.0: PCI INT A disabled
[95279.456036] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[95279.456340] ata2: port disabled. ignoring.
[95279.456402] ata_piix 0000:00:1f.1: PCI INT B disabled
[95279.456417] PM: freeze of devices complete after 228.013 msecs
[95279.457740] PM: late freeze of devices complete after 1.318 msecs
[95279.458164] ACPI: Preparing to enter system sleep state S4
[95279.460589] PM: Saving platform NVS memory
[95279.464980] Disabling non-boot CPUs ...
[95279.600031] CPU 1 is now offline
[95279.604246] PM: Creating hibernation image:
[95279.608007] PM: Need to copy 131902 pages
[95279.608007] PM: Normal pages needed: 41024 + 1024, available pages: 186154
[95279.608007] PM: Restoring platform NVS memory
[95279.608007] Enabling non-boot CPUs ...
[95279.608007] Booting Node 0 Processor 1 APIC 0x1
[95279.497481] Initializing CPU#1
[95279.696021] Switched to NOHz mode on CPU #1
[95279.752310] NMI watchdog enabled, takes one hw-pmu counter.
[95279.756033] CPU1 is up
[95279.756902] ACPI: Waking up from system sleep state S4
[95279.757524] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1
(was 0x100106, writing 0x100102)
[95279.757572] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was
0x2020, writing 0x20002020)
[95279.757645] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was
0x3030, writing 0x20003030)
[95279.757717] pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was
0x4040, writing 0x20004040)
[95279.757788] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was
0x5050, writing 0x20005050)
[95279.758017] pci 0000:00:1e.0: restoring config space at offset 0x6 (was
0x20070600, writing 0x200a0600)
[95279.758111] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was
0x2880001, writing 0x2880005)
[95279.758300] iwl3945 0000:05:00.0: restoring config space at offset 0x1 (was
0x100106, writing 0x100506)
[95279.772047] b44 0000:06:01.0: BAR 0: set to [mem 0xd0000000-0xd0001fff] (PCI
address [0xd0000000-0xd0001fff])
[95279.772087] b44 0000:06:01.0: restoring config space at offset 0x1 (was
0x100002, writing 0x100006)
[95279.772116] yenta_cardbus 0000:06:04.0: restoring config space at offset 0xf
(was 0x7400106, writing 0x5c00106)
[95279.772146] yenta_cardbus 0000:06:04.0: restoring config space at offset 0x3
(was 0x824008, writing 0x82a810)
[95279.788035] sdhci-pci 0000:06:04.2: BAR 0: set to [mem
0xd0003400-0xd00034ff] (PCI address [0xd0003400-0xd00034ff])
[95279.804030] sdhci-pci 0000:06:04.4: BAR 0: set to [mem
0xd0003100-0xd00031ff] (PCI address [0xd0003100-0xd00031ff])
[95279.804402] PM: early restore of devices complete after 47.025 msecs
[95279.863139] i915 0000:00:02.0: setting latency timer to 64
[95279.864033] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[95279.866151] HDA Intel 0000:00:1b.0: setting latency timer to 64
[95279.866205] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[95279.866271] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[95279.866318] usb usb2: root hub lost power or was reset
[95279.866336] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[95279.866382] usb usb3: root hub lost power or was reset
[95279.866397] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[95279.866441] usb usb4: root hub lost power or was reset
[95279.866455] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[95279.866499] usb usb5: root hub lost power or was reset
[95279.866515] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[95279.866543] usb usb1: root hub lost power or was reset
[95279.870440] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[95279.870455] pci 0000:00:1e.0: setting latency timer to 64
[95279.870470] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[95279.870477] ata_piix 0000:00:1f.1: setting latency timer to 64
[95279.870523] b44 0000:06:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[95279.870567] ata2: port disabled. ignoring.
[95279.870590] sdhci-pci 0000:06:04.2: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[95279.870618] sdhci-pci 0000:06:04.4: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[95279.870701] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[95279.871134] sd 0:0:0:0: [sda] Starting disk
[95280.036468] ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered
out
[95280.036473] ata1.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered
out
[95280.044455] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered
out
[95280.044460] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered
out
[95280.060575] ata1.00: configured for UDMA/100
[95280.076359] ata1.01: configured for UDMA/33
[95280.776264] PM: restore of devices complete after 913.198 msecs
[95280.776578] PM: Image restored successfully.
[95280.776581] Restarting tasks ... done.
[95280.783310] PM: Basic memory bitmaps freed
[95280.783327] video LNXVIDEO:01: Restoring backlight state
[95282.042554] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[95282.048846] ADDRCONF(NETDEV_UP): eth0: link is not ready
[95295.131136] wlan0: authenticate with 00:01:e3:e5:8a:36 (try 1)
[95295.135142] wlan0: authenticated
[95295.135184] wlan0: associate with 00:01:e3:e5:8a:36 (try 1)
[95295.156759] wlan0: RX AssocResp from 00:01:e3:e5:8a:36 (capab=0x431 status=0
aid=1)
[95295.156768] wlan0: associated
[95295.158582] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[95306.024088] wlan0: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
mmc_block 17181 0
nls_utf8 12416 0
nls_cp437 12417 0
vfat 16989 0
fat 44149 1 vfat
vboxnetadp 13120 0
vboxnetflt 23683 0
vboxdrv 147237 2 vboxnetadp,vboxnetflt
usb_storage 34951 0
uas 12975 0
acpi_cpufreq 12737 0
mperf 12387 1 acpi_cpufreq
parport_pc 21895 0
cpufreq_conservative 13598 0
ppdev 12621 0
cpufreq_powersave 12422 0
lp 12858 0
cpufreq_stats 12670 0
parport 27018 3 parport_pc,ppdev,lp
cpufreq_userspace 12520 0
sco 13219 2
rfcomm 31960 0
bnep 17147 2
l2cap 35435 6 rfcomm,bnep
crc16 12327 1 l2cap
bluetooth 50119 6 sco,rfcomm,bnep,l2cap
uinput 12984 1
fuse 55640 1
loop 17805 0
snd_hda_codec_realtek 207804 1
arc4 12418 2
ecb 12649 2
snd_hda_intel 21529 2
iwl3945 50188 0
snd_hda_codec 57563 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 12906 1 snd_hda_codec
i915 276436 2
iwlcore 50368 1 iwl3945
drm_kms_helper 26501 1 i915
drm 128416 3 i915,drm_kms_helper
i2c_i801 12670 0
mac80211 160285 2 iwl3945,iwlcore
snd_pcm 52774 2 snd_hda_intel,snd_hda_codec
wacom 25382 0
snd_seq 39172 0
cfg80211 106889 3 iwl3945,iwlcore,mac80211
i2c_algo_bit 12706 1 i915
snd_timer 22171 2 snd_pcm,snd_seq
snd_seq_device 12995 1 snd_seq
i2c_core 18989 5 i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit
snd 38153 12
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
tpm_tis 12949 0
battery 12926 0
tpm 17454 1 tpm_tis
joydev 16906 0
soundcore 12878 1 snd
snd_page_alloc 12841 2 snd_hda_intel,snd_pcm
ac 12552 0
rfkill 18510 3 bluetooth,cfg80211
rng_core 12550 0
tpm_bios 12799 1 tpm
yenta_socket 22152 0
pcmcia_rsrc 17314 1 yenta_socket
power_supply 13283 2 battery,ac
wmi 13018 0
pcspkr 12515 0
evdev 13084 22
processor 26983 3 acpi_cpufreq
container 12525 0
psmouse 45863 0
serio_raw 12758 0
video 17345 1 i915
button 12866 1 i915
ext3 98001 3
jbd 40818 1 ext3
mbcache 12810 1 ext3
sha256_generic 16709 2
aes_i586 16608 6
aes_generic 37066 1 aes_i586
cbc 12659 2
usbhid 35168 0
hid 59736 1 usbhid
dm_crypt 17809 1
dm_mod 56394 12 dm_crypt
sg 21385 0
sr_mod 17418 0
cdrom 34631 1 sr_mod
sd_mod 34941 3
crc_t10dif 12332 1 sd_mod
ata_generic 12439 0
ata_piix 21079 2
libata 131904 2 ata_generic,ata_piix
b44 22672 0
sdhci_pci 13000 0
ssb 38626 1 b44
sdhci 21405 1 sdhci_pci
uhci_hcd 21850 0
scsi_mod 134369 6 usb_storage,uas,sg,sr_mod,sd_mod,libata
mmc_core 52605 3 mmc_block,sdhci,ssb
ehci_hcd 34889 0
usbcore 99058 7 usb_storage,uas,wacom,usbhid,uhci_hcd,ehci_hcd
thermal 13058 0
pcmcia 32024 1 ssb
thermal_sys 17667 3 processor,video,thermal
pcmcia_core 17973 3 yenta_socket,pcmcia_rsrc,pcmcia
mii 12562 1 b44
nls_base 12649 5 nls_utf8,nls_cp437,vfat,fat,usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS,
943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if
00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at d0300000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0280000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition
Audio Controller [8086:27d8] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at d0340000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 84000000-841fffff
Prefetchable memory behind bridge: 0000000084200000-00000000843fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 84400000-845fffff
Prefetchable memory behind bridge: 0000000084600000-00000000847fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: 84800000-849fffff
Prefetchable memory behind bridge: 0000000084a00000-0000000084bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d0100000-d01fffff
Prefetchable memory behind bridge: 0000000084c00000-0000000084dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI
Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d0544000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32
I/O behind bridge: 00006000-00006fff
Memory behind bridge: d0000000-d00fffff
Prefetchable memory behind bridge: 0000000080000000-0000000083ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [8086:27b9] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller
[8086:27da] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18a0 [size=32]
05:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG
[Golan] Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation PRO/Wireless 3945ABG Network Connection
[8086:1001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
06:01.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX
[14e4:170c] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: b44
06:04.0 CardBus bridge [0607]: ENE Technology Inc CB-712/4 Cardbus Controller
[1524:1412] (rev 10)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0002000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 80000000-83fff000 (prefetchable)
Memory window 1: 88000000-8bfff000
I/O window 0: 00006000-000060ff
I/O window 1: 00006400-000064ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
06:04.1 FLASH memory [0501]: ENE Technology Inc ENE PCI Memory Stick Card
Reader Controller [1524:0530] (rev 01)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 0: Memory at d0003000 (32-bit, non-prefetchable) [disabled]
[size=128]
Capabilities: <access denied>
06:04.2 SD Host controller [0805]: ENE Technology Inc ENE PCI Secure Digital
Card Reader Controller [1524:0550] (rev 01) (prog-if 01)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0003400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
06:04.3 FLASH memory [0501]: ENE Technology Inc FLASH memory: ENE Technology
Inc: [1524:0520] (rev 01)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 0: Memory at d0003800 (32-bit, non-prefetchable) [disabled]
[size=128]
Capabilities: <access denied>
06:04.4 FLASH memory [0501]: ENE Technology Inc SD/MMC Card Reader Controller
[1524:0551] (rev 01)
Subsystem: Acer Incorporated [ALI] Device [1025:0090]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0003100 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.38-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.38-2-686 depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.38-2-686 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
ii libc6-i686 2.11.2-11 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.38-2-686 suggests:
ii grub-pc 1.98+20100804-14 GRand Unified Bootloader, version
pn linux-doc-2.6.38 <none> (no description available)
Versions of packages linux-image-2.6.38-2-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
ii firmware-iwlwifi 0.29 Binary firmware for Intel Wireless
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.38-2-686/postinst/depmod-error-initrd-2.6.38-2-686: false
linux-image-2.6.38-2-686/postinst/ignoring-do-bootloader-2.6.38-2-686:
linux-image-2.6.38-2-686/prerm/removing-running-kernel-2.6.38-2-686: true
linux-image-2.6.38-2-686/postinst/missing-firmware-2.6.38-2-686:
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
