Package: linux-2.6
Version: 2.6.38-2
Severity: critical
Justification: breaks the whole system
Booting...
Boot IO Dependent Code (IODC) revision 1
HARD Booted.
palo ipl 1.17 root@c3k Sun Mar 7 16:13:48 MST 2010
Skipping extended partition 6 - beyond reach of IPL
Partition Start(MB) End(MB) Id Type
1 1 31 f0 Palo
2 32 156 83 ext2
5 157 6832 83 ext2
PALO(F0) partition contains:
0/vmlinux64 6241289 bytes @ 0x48000
Command line for kernel: 'root=/dev/sda5 console=ttyS1 HOME=/
palo_kernel=2/vmlinux'
Selected kernel: /vmlinux from partition 2
Selected ramdisk: /initrd.img from partition 2
ELF64 executable
Entry 00100000 first 00100000 n 3
Segment 0 load 00100000 size 5419008 mediaptr 0x1000
Segment 1 load 006b9ce0 size 507616 mediaptr 0x52cce0
Segment 2 load 00738000 size 323008 mediaptr 0x5a9000
Loading ramdisk 14508363 bytes @ 3f218000...
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-2-parisc64-smp (Debian 2.6.38-2)
(b...@decadent.org.uk) (gcc version 4.4.5 (GCC) ) #1 SMP Wed Mar 30 08:16:31
UTC 2011
[ 0.000000] unwind_init: start = 0x4053f000, end = 0x405728a0, entries =
13194
[ 0.000000] FP[0] enabled: Rev 1 Model 20
[ 0.000000] The 64-bit Kernel has started...
[ 0.000000] bootconsole [ttyB0] enabled
[ 0.000000] Initialized PDC Console for debugging.
[ 0.000000] Determining PDC firmware type: 64 bit PAT.
[ 0.000000] model 00008870 00000491 00000000 00000002 3e0505e7352af711
100000f0 00000008 000000b2 000000b2
[ 0.000000] vers 00000301
[ 0.000000] CPUID vers 20 rev 4 (0x00000284)
[ 0.000000] capabilities 0x35
[ 0.000000] model 9000/800/rp3440
[ 0.000000] parisc_cache_init: Only equivalent aliasing supported!
[ 0.000000] Memory Ranges:
[ 0.000000] 0) Start 0x0000000000000000 End 0x000000003fffffff Size 1024
MB
[ 0.000000] 1) Start 0x0000000100000000 End 0x000000027fdfffff Size 6142
MB
[ 0.000000] 2) Start 0x0000004040000000 End 0x00000040ffffffff Size 3072
MB
[ 0.000000] Total Memory: 10238 MB
[ 0.000000] initrd: 7f218000-7ffee14b
[ 0.000000] initrd: reserving 3f218000-3ffee14b (mem_max 27fe00000)
[ 0.000000] PERCPU: Embedded 10 pages/cpu @00000000428f5000 s11712 r8192
d21056 u40960
[ 0.000000] SMP: bootstrap CPU ID is 0
[ 0.000000] Built 3 zonelists in Zone order, mobility grouping on. Total
pages: 2585095
[ 0.000000] Kernel command line: root=/dev/sda5 console=ttyS1 HOME=/
palo_kernel=2/vmlinux
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216
bytes)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.000000] Memory: 10273764k/10483712k available (3590k kernel code,
209948k reserved, 1649k data, 316k init)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] vmalloc : 0x0000000000008000 - 0x000000003f000000 (1007 MB)
[ 0.000000] memory : 0x0000000040000000 - 0x0000004140000000 (266240
MB)
[ 0.000000] .init : 0x0000000040738000 - 0x0000000040787000 ( 316 kB)
[ 0.000000] .data : 0x0000000040481b60 - 0x000000004061e020 (1649 kB)
[ 0.000000] .text : 0x0000000040100000 - 0x0000000040481b60 (3590 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=8,
Nodes=8
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:128
[ 0.000000] Console: colour dummy device 160x64
[ 0.000000] Calibrating delay loop... 1597.44 BogoMIPS (lpj=3194880)
[ 0.096000] pid_max: default: 32768 minimum: 301
[ 0.096000] Security Framework initialized
[ 0.096000] SELinux: Disabled at boot.
[ 0.096000] Mount-cache hash table entries: 256
[ 0.104000] Initializing cgroup subsys ns
[ 0.104000] ns_cgroup deprecated: consider using the 'clone_children' flag
without the ns_cgroup.
[ 0.108000] Initializing cgroup subsys cpuacct
[ 0.108000] Initializing cgroup subsys devices
[ 0.116000] Initializing cgroup subsys freezer
[ 0.116000] Initializing cgroup subsys net_cls
[ 0.124000] Initializing cgroup subsys blkio
[ 0.124000] Brought up 1 CPUs
[ 0.124000] devtmpfs: initialized
[ 0.132000] print_constraints: dummy:
[ 0.132000] NET: Registered protocol family 16
[ 0.140000] EISA bus registered
[ 0.140000] Searching for devices...
[ 0.260000] Found devices:
[ 0.260000] 1. Storm Peak Slow at 0xfffffffffe780000 [128] { 0, 0x0, 0x887,
0x00004 }
[ 0.264000] 2. Storm Peak Slow at 0xfffffffffe781000 [129] { 0, 0x0, 0x887,
0x00004 }
[ 0.264000] 3. Storm Peak Slow at 0xfffffffffe798000 [152] { 0, 0x0, 0x887,
0x00004 }
[ 0.268000] 4. Storm Peak Slow at 0xfffffffffe799000 [153] { 0, 0x0, 0x887,
0x00004 }
[ 0.276000] 5. Everest Mako Memory at 0xfffffffffed08000 [8] { 1, 0x0,
0x0af, 0x00009 }
[ 0.284000] 6. Pluto BC McKinley Port at 0xfffffffffed00000 [0] { 12, 0x0,
0x880, 0x0000c }
[ 0.292000] 7. Mercury PCI Bridge at 0xfffffffffed20000 [0/0] { 13, 0x0,
0x783, 0x0000a }
[ 0.292000] 8. Mercury PCI Bridge at 0xfffffffffed22000 [0/1] { 13, 0x0,
0x783, 0x0000a }
[ 0.300000] 9. Mercury PCI Bridge at 0xfffffffffed24000 [0/2] { 13, 0x0,
0x783, 0x0000a }
[ 0.304000] 10. Mercury PCI Bridge at 0xfffffffffed26000 [0/3] { 13, 0x0,
0x783, 0x0000a }
[ 0.312000] 11. Mercury PCI Bridge at 0xfffffffffed28000 [0/4] { 13, 0x0,
0x783, 0x0000a }
[ 0.320000] 12. Mercury PCI Bridge at 0xfffffffffed2c000 [0/6] { 13, 0x0,
0x783, 0x0000a }
[ 0.328000] 13. Mercury PCI Bridge at 0xfffffffffed2e000 [0/7] { 13, 0x0,
0x783, 0x0000a }
[ 0.328000] 14. BMC IPMI Mgmt Ctlr at 0xfffffff0f05b0000 [16] { 15, 0x0,
0x004, 0x000c0 }
[ 0.336000] Enabling PDC_PAT chassis codes support v0.05
[ 0.892000] Releasing cpu 1 now, hpa=fffffffffe781000
[ 0.936000] FP[1] enabled: Rev 1 Model 20
[ 0.968000] Releasing cpu 2 now, hpa=fffffffffe798000
[ 1.016000] FP[2] enabled: Rev 1 Model 20
[ 1.044000] Releasing cpu 3 now, hpa=fffffffffe799000
[ 1.104000] FP[3] enabled: Rev 1 Model 20
[ 1.128000] CPU(s): 4 x PA8800 (Mako) at 800.006400 MHz
[ 1.132000] Setting cache flush threshold to 2000000 (4 CPUs online)
[ 1.172000] SBA found Pluto 2.3 at 0xfffffffffed00000
[ 1.372000] Mercury version TR3.2 (0x32) found at 0xfffffffffed20000
[ 1.448000] Mercury version TR3.2 (0x32) found at 0xfffffffffed22000
[ 1.528000] Mercury version TR3.2 (0x32) found at 0xfffffffffed24000
[ 1.604000] Mercury version TR3.2 (0x32) found at 0xfffffffffed26000
[ 1.680000] Mercury version TR3.2 (0x32) found at 0xfffffffffed28000
[ 1.760000] Mercury version TR3.2 (0x32) found at 0xfffffffffed2c000
[ 1.836000] Mercury version TR3.2 (0x32) found at 0xfffffffffed2e000
[ 1.892000] LBA: Truncating lmmio_space [fffffffff0000000/fffffffffecffffe]
to [fffffffff0000000,fffffffffe77ffff]
[ 1.896000] powersw: Soft power switch support not available.
[ 1.896000] bio: create slab <bio-0> at 0
[ 1.904000] vgaarb: device added:
PCI:0000:e0:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.904000] vgaarb: loaded
[ 1.916000] NET: Registered protocol family 2
[ 1.916000] IP route cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 1.924000] TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
[ 1.932000] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.936000] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.936000] TCP reno registered
[ 1.936000] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.940000] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.948000] NET: Registered protocol family 1
[ 2.016000] Unpacking initramfs...
[ 3.032000] Freeing initrd memory: 14168k freed
[ 3.036000] Chassis warnings not supported.
[ 3.036000] Performance monitoring counters enabled for Storm Peak Slow
[ 3.036000] audit: initializing netlink socket (disabled)
[ 3.036000] type=2000 audit(1302960532.036:1): initialized
[ 3.052000] VFS: Disk quotas dquot_6.5.2
[ 3.052000] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.080000] msgmni has been set to 20093
[ 3.080000] alg: No test for stdrng (krng)
[ 3.080000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 3.084000] io scheduler noop registered
[ 3.084000] io scheduler deadline registered
[ 3.092000] io scheduler cfq registered (default)
[ 3.096000] PDC Stable Storage facility v0.30
[ 3.144000] STI GSC/PCI core graphics driver Version 0.9a
[ 3.144000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.168000] 0000:e0:01.0: ttyS0 at MMIO 0xfffffffff4051000 (irq = 73) is a
16450
[ 3.208000] 0000:e0:01.1: ttyS1 at MMIO 0xfffffffff4050000 (irq = 73) is a
16550A
[ 3.212000] console [ttyS1] enabled, bootconsole disabled
[ 3.212000] console [ttyS1] enabled, bootconsole disabled
[ 3.232000] 0000:e0:01.1: ttyS2 at MMIO 0xfffffffff4050010 (irq = 73) is a
16550A
[ 3.252000] 0000:e0:01.1: ttyS3 at MMIO 0xfffffffff4050038 (irq = 73) is a
16550A
[ 3.256000] mousedev: PS/2 mouse device common for all mice
[ 3.256000] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 3.264000] TCP cubic registered
[ 3.264000] NET: Registered protocol family 17
[ 3.264000] Registering the dns_resolver key type
[ 3.268000] registered taskstats version 1
[ 3.276000] rtc-generic rtc-generic: setting system clock to 2011-04-16
13:28:53 UTC (1302960533)
[ 3.376000] Freeing unused kernel memory: 316k freed
Loading, please wait...
[ 4.712000] udev[52]: starting version 164
[ 6.092000] usbcore: registered new interface driver usbfs
[ 6.092000] usbcore: registered new interface driver hub
[ 6.100000] usbcore: registered new device driver usb
[ 6.556000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.624000] ehci_hcd 0000:00:01.2: EHCI Host Controller
[ 6.624000] ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus
number 1
[ 6.660000] ehci_hcd 0000:00:01.2: irq 68, io mem 0xffffffff80000000
[ 6.660000] SCSI subsystem initialized
[ 6.676000] ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 0.95
[ 6.676000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.676000] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.680000] usb usb1: Product: EHCI Host Controller
[ 6.680000] usb usb1: Manufacturer: Linux 2.6.38-2-parisc64-smp ehci_hcd
[ 6.720000] usb usb1: SerialNumber: 0000:00:01.2
[ 6.720000] hub 1-0:1.0: USB hub found
[ 6.720000] hub 1-0:1.0: 5 ports detected
[ 6.956000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.000000] ohci_hcd 0000:00:01.0: OHCI Host Controller
[ 7.004000] ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus
number 2
[ 7.004000] ohci_hcd 0000:00:01.0: irq 66, io mem 0xffffffff80002000
[ 7.228000] tg3.c:v3.116 (December 3, 2010)
[ 7.872000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.872000] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.872000] usb usb2: Product: OHCI Host Controller
[ 7.872000] usb usb2: Manufacturer: Linux 2.6.38-2-parisc64-smp ohci_hcd
[ 7.880000] usb usb2: SerialNumber: 0000:00:01.0
[ 7.888000] hub 2-0:1.0: USB hub found
[ 7.888000] hub 2-0:1.0: 3 ports detected
Firmware Version 46.34
Duplex Console IO Dependent Code (IODC) revision 1
PROCESSOR PIM INFORMATION
Original Product Number: A7136A
Current Product Number: A7136A
----------------- Processor 0 HPMC Information - PDC Version: 46.34 ------
Timestamp = Sat Apr 16 13:28:57 GMT 2011 (20:11:04:16:13:28:57)
HPMC Chassis Codes
Chassis Code Extension
------------ ---------
0xe800035c00e00000 0x00000000403451b4
0x57000f7300e00000 0x8040004000000000
0xf600105e00e00000 0xfffffff0f0c00000
0x140003b200e00000 0x000000000000000b
0x5600100b00e00000 0x0000000000000194
0x5600106400e00000 0xfffffff0f0435110
General Registers 0 - 31
00-03 0000000000000000 000000004072d8c0 0000000040128ebc 000000007f5cc000
04-07 000000001c5fc000 000000000800000f 0000000000000000 0000000000000000
08-11 000000007f5cc000 000000007f99cbb0 0000000000000000 0000000000020690
12-15 0000000000000000 00000000000205e0 000000000001e128 000000000001d18a
16-19 00000000fb3e82d0 000000000001a000 000000000001ac94 000000000000fffc
20-23 000000004069d278 0000000000000000 ffffffffc0000000 0000000000100000
24-27 000000000000000a 00000000003c8002 000000007eca0800 00000000407118c0
28-31 000000000002c000 000000007f99cf40 000000007f99cf70 0000000000000002
Control Registers 0 - 31
00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000
04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000
08-11 0000000000000078 0000000000000000 00000000000000c0 0000000000000001
12-15 0000000000000000 0000000000000000 0000000000103000 ffe0000000000000
16-19 00000077cb22f1cc 0000000000000000 00000000403451b4 00000000503f02b0
20-23 0000000000340001 00000000cb72da18 000000ff0804ff0e 0000000000000000
24-27 0000000000621000 000000003f9c2000 fffdffffffdfffef 0000000040001540
28-31 0000000040001540 ffffffffffffff7f 000000007f99c000 886904b488140042
Space Registers 0 - 7
00-03 0000000000012000 0000000000000000 0000000000000000 000000000001e000
04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000
IIA Space (back entry) = 0x0000000000000000
IIA Offset (back entry) = 0x00000000403451b8
Check Type = 0x20000000
Cpu State = 0x9e000000
Cache Check = 0x00000000
TLB Check = 0x00000000
Bus Check = 0x00000000
Assists Check = 0x0001e000
Assist State = 0x00000000
Path Info = 0x00000000
System Responder Address = 0x0000000000000000
System Requestor Address = 0x0000000000000000
Floating Point Registers 0 - 31
00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000
04-07 0000000000000001 0000000040787000 0000000040787000 00000000407118c0
08-11 000000000004f000 00000000407348c0 000000007ec603b8 00000000404d74f0
12-15 0000000000000003 000000000005bcc0 0000000000000000 0000000000000000
16-19 000000000000bcc0 0000000000000000 00000000407348c0 0000000000000001
20-23 000000000000ea60 0000000000000500 0000000000000000 0000000000000000
24-27 0000000000000000 0000000000000000 00000000407230c0 00000000407230c0
28-31 00000000407230c0 000000000000000f 00000000405b31e8 00000000407238c0
PIM Revision = 0x0000000000000001
CPU ID = 0x0000000000000014
CPU Revision = 0x0000000000000031
Cpu Serial Number = 0x46100b89e43f0503
Check Summary = 0x8040004000000000
SAL Timestamp = 0x000000004da99999
System Firmware Rev. = 0x00000ba20000121a
PDC Relocation Address = 0xfffffff0f0c00000
Available Memory = 0x000000027fe00000
CPU Diagnose Register 2 = 0x3112022000002008
MIB_STAT = 0x0040000000200000
MIB_LOG1 = 0x0000000000555500
MIB_LOG2 = 0x0000800000000000
MIB_ECC_DATA = 0x808800007fffbfd8
ICache Info = 0x0000000000000000
DCache Info = 0x0000000000000000
Sharedcache Info1 = 0x0000000000000000
Sharedcache Info2 = 0x0000000000000080
MIB_RSLOG1 = 0x0000000000000004
MIB_RSLOG2 = 0x0000010000000000
MIB_RQLOG = 0x00002580001e1510
MIB_REQLOGa = 0x8000000000000200
MIB_REQLOGb = 0x01000aa400000000
Reserved = 0x0000000000000000
Cache Repair Detail = 0x0000000000000000
PIM Detail Text:
-------------- Memory Error Log Information --------------
No errors logged for this bus
------------ I/O Module Error Log Information ------------
IO Subsystem Log Entries
Found 1 PCI Comp error
Found 1 PCI Bus error
------------------------------------------------
Detail display of IO subsystem log entries
------------------------------------------
PCI Component Error information
PCI Component Error 1
--- Section Header ---
GUID
data1 0xe429faf6
data2 0x3cb7
data3 0x11d4
datat4 0xbc a7 0 80 c7 3c 88 81
REVISION 0x0200
ERROR_RECOVERY_INFO 0x80
SECTION_LENGTH 0x00000188
VALIDATION_BITS 0x0000000000000023
PCI_COMP_ERROR_STATUS 0x00000000005a2000
PCI_COMP_INFO 0x0000000000004a7c 0x0035103303104100
Vendor Id/Device Id: 0x35/1033
Base Class/Sub Class/Program Interface: 0x41/10/3
Segment/Bus/Device/Function: 0x0/0/1/0
PCI_COMP_MEM_NUM 0
PCI_COMP_IO_NUM 0
PCI_COMP_REGS_DATA_PAIR
Address Data
0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000
PCI_COMP_OEM_DATA_STRUCT
--- Section Header ---
GUID
data1 0x4f7d86a
data2 0x598b
data3 0x4a0a
data4 0xaa 62 ff 70 73 46 67 4d
LENGTH 232
PHYSICAL_LOCATION 0xffffffffffffff00
REGISTRATION_NUMBER 0x0000000000000008
CONFIG_REGISTERS_DATA
Offset Size Data
0 8 0x2210014600351033
8 8 0x008080200c031041
16 8 0x0000000080002000
24 8 0x0000000000000000
32 8 0x0000000000000000
40 8 0x0035103300000000
48 8 0x0000004000000000
56 8 0x2a01010000000000
0 0 0x0000000000000000
0 0 0x0000000000000000
0 0 0x0000000000000000
0 0 0x0000000000000000
End of PCI Component Error Information for Error 1
PCI Bus Error information
PCI Bus Error 1
--- Section Header ---
GUID
data1 0xe429faf4
data2 0x3cb7
data3 0x11d4
data4 0xbc a7 0 80 c7 3c 88 81
REVISION 0x0200
ERROR_RECOVERY_INFO 0x84
SECTION_LENGTH 0x00000108
VALIDATION_BITS 0x000000000000074f
PCI_BUS_ERROR_STATUS 0x00000000005a2000
PCI_BUS_ERROR_TYPE 0x0000000000000004
PCI_BUS_ID 0x0000000000000000
PCI_BUS_ADDRESS 0x0000000000000d20
PCI_BUS_DATA 0x0000000000000000
PCI_BUS_CMD 0x0000000000000000
PCI_BUS_REQUESTOR_ID 0x00000000fed20000
PCI_BUS_COMPLETER_ID 0x0000000000000000
PCI_BUS_TARGET_ID 0x0000000000000d20
PCI_BUS_OEM_ID 0x0000000000003d90
Bus OEM Data
CEC Header:
--- OEM Data Header ---
GUID
data1 0x9fe64482
data2 0xa02d
data3 0x4ef7
data4 0xad e6 c6 63 59 62 53 99
--- OEM Data Body ---
CELL_NUMBER 0
SBA_NUMBER 0
ROPE_NUMBER 0
--- Mercury Info ---
ERROR_STATUS 0x000000010000021c
ERROR_MASTER_ID_LOG 0x0000000000000000
INBOUND_ERR_ADDRESS 0x0000000000000000
INBOUND_ERR_ATTRIBUTE 0x0000000000000000
COMPLETION_MESSAGE_LOG 0x0000000000000000
OUTBOUND_ERR_ADDRESS 0x0000000000000d20
ERROR_CONFIG 0x0000000000000030
STATUS_INFO_CONTROL 0x0000000000000000
FUNC_ID 0x22b00146122e103c
CAPABILITIES_LIST 0x0f00023700200002
AGP_COMMAND 0x0000000000000000
PCIX_CAPABILITIES 0x0013ff0000010007
OLR_CONTROL 0x00023f1b00032403
CLOCK_CONTROL 0x0000000000000048
BUS_MODE 0xa1a974ae36f58460
End of PCI Bus Error Information for Error 1
End of PCI Bus Error Information
0000000040345188 <lba_pat_out8>:
40345188: 53 5c 03 30 ldd 198(r26),ret0
4034518c: db 39 0b f0 extrd,u r25,63,16,r25
40345190: d6 7f 18 52 depwi,z -1,29,14,r19
40345194: db 3f 0b fe extrd,u r25,63,2,r31
40345198: 0a 79 02 19 and r25,r19,r25
4034519c: f3 39 11 4a depd,z r25,53,54,r25
403451a0: 0b f9 0a 19 add,l r25,r31,r25
403451a4: 0b 3c 0a 19 add,l ret0,r25,r25
403451a8: 0f 38 12 00 stb r24,0(r25)
403451ac: 2b 6e 00 00 addil L%1c000,dp,r1
403451b0: 0f 40 10 dc ldd 0(r26),ret0
403451b4: 50 3f 02 b0 ldd 158(r1),r31
403451b8: 0f 80 10 9c ldw 0(ret0),ret0
403451bc: e8 40 d0 00 bve (rp)
403451c0: 0f fc 12 80 stw ret0,0(r31)
403451c4: 00 00 00 00 break 0,0
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
model : 9000/800/rp3440
model name : Storm Peak Slow
hversion : 0x00008870
sversion : 0x00000491
model : 9000/800/rp3440
model name : Storm Peak Slow
hversion : 0x00008870
sversion : 0x00000491
model : 9000/800/rp3440
model name : Storm Peak Slow
hversion : 0x00008870
sversion : 0x00000491
model : 9000/800/rp3440
model name : Storm Peak Slow
hversion : 0x00008870
sversion : 0x00000491
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet static
address 132.246.10.88
netmask 255.255.255.240
network 132.246.10.80
broadcast 132.246.10.95
gateway 132.246.10.81
dns-nameservers 132.246.161.100 132.246.161.200 132.246.10.84
dns-search hia.nrc.ca
** PCI devices:
00:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 41)
(prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (250ns min, 10500ns max), Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 66
Region 0: Memory at ffffffff80002000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: <access denied>
00:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 41)
(prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (250ns min, 10500ns max), Cache Line Size: 128 bytes
Interrupt: pin B routed to IRQ 67
Region 0: Memory at ffffffff80001000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: <access denied>
00:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 02)
(prog-if 20 [EHCI])
Subsystem: NEC Corporation USB 2.0 [1033:00e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (4000ns min, 8500ns max), Cache Line Size: 128 bytes
Interrupt: pin C routed to IRQ 68
Region 0: Memory at ffffffff80000000 (32-bit, non-prefetchable)
[size=256]
Capabilities: <access denied>
00:02.0 IDE interface [0101]: Silicon Image, Inc. SiI 0649 Ultra ATA/100 PCI to
ATA Host Controller [1095:0649] (rev 02) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: Silicon Image, Inc. SiI 0649 Ultra ATA/100 PCI to ATA Host
Controller [1095:0649]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 69
Region 0: I/O ports at 0d18 [size=8]
Region 1: I/O ports at 0d24 [size=4]
Region 2: I/O ports at 0d10 [size=8]
Region 3: I/O ports at 0d20 [size=4]
Region 4: I/O ports at 0d00 [size=16]
Capabilities: <access denied>
20:01.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1010 66MHz
Ultra3 SCSI Adapter [1000:0021] (rev 01)
Subsystem: LSI Logic / Symbios Logic LSI53C1000/1000R/1010R/1010-66 PCI
to Ultra160 SCSI Controller [1000:1000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 192 (4250ns min, 4500ns max), Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 70
Region 0: I/O ports at 12100 [size=256]
Region 1: Memory at ffffffff90015000 (64-bit, non-prefetchable)
[size=1K]
Region 3: Memory at ffffffff90012000 (64-bit, non-prefetchable)
[size=8K]
Capabilities: <access denied>
Kernel driver in use: sym53c8xx
20:01.1 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1010 66MHz
Ultra3 SCSI Adapter [1000:0021] (rev 01)
Subsystem: LSI Logic / Symbios Logic LSI53C1000/1000R/1010R/1010-66 PCI
to Ultra160 SCSI Controller [1000:1000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 192 (4250ns min, 4500ns max), Cache Line Size: 128 bytes
Interrupt: pin B routed to IRQ 71
Region 0: I/O ports at 12000 [size=256]
Region 1: Memory at ffffffff90014000 (64-bit, non-prefetchable)
[size=1K]
Region 3: Memory at ffffffff90010000 (64-bit, non-prefetchable)
[size=8K]
Capabilities: <access denied>
Kernel driver in use: sym53c8xx
20:02.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5701
Gigabit Ethernet [14e4:1645] (rev 15)
Subsystem: Hewlett-Packard Company Core Lan 1000Base-T [103c:12a4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 72
Region 0: Memory at ffffffff90000000 (64-bit, non-prefetchable)
[size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
e0:01.0 Communication controller [0780]: Hewlett-Packard Company Auxiliary Diva
Serial Port [103c:1290] (rev 01)
Subsystem: Hewlett-Packard Company Diva SP2 [103c:1291]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 73
Region 2: Memory at fffffffff4051000 (32-bit, non-prefetchable)
[size=16]
Capabilities: <access denied>
Kernel driver in use: serial
e0:01.1 Serial controller [0700]: Hewlett-Packard Company Diva Serial [GSP]
Multiport UART [103c:1048] (rev 03) (prog-if 02 [16550])
Subsystem: Hewlett-Packard Company Everest SP2 [103c:1282]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 73
Region 0: Memory at fffffffff4050000 (32-bit, non-prefetchable)
[size=4K]
Region 2: Memory at fffffffff4020000 (32-bit, prefetchable) [size=128K]
Capabilities: <access denied>
Kernel driver in use: serial
e0:02.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV100 QY
[Radeon 7000/VE] [1002:5159] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Radeon 7000 [103c:1292]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (2000ns min), Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 74
Region 0: Memory at fffffffff0000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at 6e000 [size=256]
Region 2: Memory at fffffffff4040000 (32-bit, non-prefetchable)
[size=64K]
Expansion ROM at fffffffff4000000 [disabled] [size=128K]
Capabilities: <access denied>
** USB devices:
not available
-- System Information:
Debian Release: wheezy/sid
APT prefers oldstable
APT policy: (500, 'oldstable'), (500, 'unstable'), (500, 'testing')
Architecture: hppa (parisc64)
Kernel: Linux 2.6.39-rc2+ (SMP w/4 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.38-2-parisc64-smp depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.38-2-parisc64-smp recommends:
ii firmware-linux-free 3 Binary firmware for various driver
Versions of packages linux-image-2.6.38-2-parisc64-smp suggests:
pn linux-doc-2.6.38 <none> (no description available)
ii palo 1.18 Linux boot loader for parisc/hppa
Versions of packages linux-image-2.6.38-2-parisc64-smp is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.38-2-parisc64-smp/prerm/removing-running-kernel-2.6.38-2-parisc64-smp:
true
linux-image-2.6.38-2-parisc64-smp/postinst/missing-firmware-2.6.38-2-parisc64-smp:
linux-image-2.6.38-2-parisc64-smp/postinst/ignoring-do-bootloader-2.6.38-2-parisc64-smp:
linux-image-2.6.38-2-parisc64-smp/postinst/depmod-error-initrd-2.6.38-2-parisc64-smp:
false
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
