Package: xserver-xorg
Version: 1:7.6+6
Severity: important
VT switching (via Ctrl-Alt-F[1-6]) does not work. When trying to switch, X
seems to freeze: no response to kbd, mouse pointer disappears, xclock stops
dead.
But, in fact the VT has switched, it is just not reflected on video: Can type
commands, restart xdm and suchlike, when typing blind. And, when switching
"back" to VT7 (via Alt+F7) everything pops back into life.
This is the very behaviour I reported before for xserver-xorg 7.3+20 (i386).
On some occasions though I couldn't get back to VT7, only solution left was
magic sysrq -- or power button.
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Mar 5 18:38 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1783236 Mar 26 08:55 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile
915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 03)
Xorg X server configuration file status:
----------------------------------------
-rw-r--r-- 1 root root 2581 Apr 15 18:26 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
-------------------------------
Section "ServerLayout"
Identifier "Layout"
Screen "Screen"
InputDevice "Keyboard"
InputDevice "Mouse"
EndSection
Section "ServerFlags"
#Option "AllowMouseOpenFail" "on" # default: no # try on w/ 2.6.32
nightmare, makes no diff at all!
Option "DontVTSwitch" "no"
# from daemonforums.org, for X without hal:
Option "AllowEmptyInput" "no" # default: on, off for 2.6.32
Option "AutoAddDevices" "no" # default: on, off for 2.6.32
# further:
Option "AutoEnableDevices" "on"
EndSection
Section "Files"
EndSection
Section "InputDevice"
Identifier "Keyboard"
Driver "evdev"
Option "CoreKeyboard" # deprecated, use SendCoreEvents (def: on) #
c'd out for 2.6.32
Option "Device" "/dev/input/event0"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Mouse"
Driver "synaptics"
Option "GrabDevice" "true"
Option "Device" "/dev/input/event6" # c'd IN for 2.6.32
# synaptics(4) options:
Option "Protocol" "auto-dev" # can be "event" for 2.6.32
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "VertTwoFingerScroll" "on"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor"
#VendorName "QDS" # optional
#ModelName "46" # optional
Option "DPMS" "on"
EndSection
Section "Device"
# first: generic options
# Option "ModeDebug" "true"
Identifier "GraphChip"
Driver "intel"
# Driver "vesa" # WORKS!
# Driver "fbdev"
BusID "PCI:0:2:0"
Screen 0 # Most drivers require that the primary screen (0) be
present.
# VendorName "Intel Corporation" # optional
# then: intel options
# Option "FallbackDebug" "true" # this produces about 21MB of blah
# Option "XvMC" "true" # driver disables this # try without
# final: undocumented:
# BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
EndSection
#Section "Device" # this works, with quirks
# Identifier "GraphChip"
# Driver "fbdev"
# Option "AccelMethod" "XAA"
# BusID "PCI:0:2:0"
#EndSection
Section "Screen"
Identifier "Screen"
Device "GraphChip"
Monitor "Monitor"
Option "Accel" # Try to setup XAA (seemed to work with last driver)
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display" # this is default as per fbdev
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
/etc/X11/xorg.conf.d does not exist.
KMS configuration files:
------------------------
/etc/modprobe.d/i915-kms.conf:
options i915 modeset=1
Kernel version (/proc/version):
-------------------------------
Linux version 2.6.30.bootlogd (2.6.30) (root@mash) (gcc version 4.3.4 (Debian
4.3.4-6) ) #1 Fri Sep 3 18:13:12 CEST 2010
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 20268 Apr 15 18:40 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 28.112]
X.Org X Server 1.9.5
Release Date: 2011-03-17
[ 28.112] X Protocol Version 11, Revision 0
[ 28.112] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[ 28.112] Current Operating System: Linux mash 2.6.30.bootlogd #1 Fri Sep 3
18:13:12 CEST 2010 i686
[ 28.112] Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.30.bootlogd
root=UUID=8625ed4e-f3d5-4c97-80b2-cb14e856bdb6 ro vga=791
[ 28.112] Build Date: 26 March 2011 07:50:38AM
[ 28.112] xorg-server 2:1.9.5-1 (Cyril Brulebois <k...@debian.org>)
[ 28.112] Current version of pixman: 0.16.2
[ 28.112] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 28.112] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 28.112] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 15 18:37:09
2011
[ 28.155] (==) Using config file: "/etc/X11/xorg.conf"
[ 28.162] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 28.186] (==) ServerLayout "Layout"
[ 28.186] (**) |-->Screen "Screen" (0)
[ 28.186] (**) | |-->Monitor "Monitor"
[ 28.186] (**) | |-->Device "GraphChip"
[ 28.186] (**) |-->Input Device "Keyboard"
[ 28.186] (**) |-->Input Device "Mouse"
[ 28.186] (**) Option "DontVTSwitch" "no"
[ 28.187] (**) Option "AllowEmptyInput" "no"
[ 28.187] (**) Option "AutoAddDevices" "no"
[ 28.187] (**) Option "AutoEnableDevices" "on"
[ 28.187] (**) Not automatically adding devices
[ 28.187] (**) Automatically enabling devices
[ 28.393] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/cyrillic,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 28.393] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 28.393] (==) |-->Input Device "Mouse"
[ 28.393] (==) The core pointer device wasn't specified explicitly in the
layout.
Using the first mouse device.
[ 28.393] (II) Loader magic: 0x81f9f60
[ 28.393] (II) Module ABI versions:
[ 28.393] X.Org ANSI C Emulation: 0.4
[ 28.393] X.Org Video Driver: 8.0
[ 28.393] X.Org XInput driver : 11.0
[ 28.393] X.Org Server Extension : 4.0
[ 28.394] (--) PCI:*(0:0:2:0) 8086:2592:1028:01c9 rev 3, Mem @
0xdff00000/524288, 0xc0000000/268435456, 0xdfec0000/262144, I/O @ 0x0000eff8/8
[ 28.394] (--) PCI: (0:0:2:1) 8086:2792:1028:01c9 rev 3, Mem @
0xdff80000/524288
[ 28.394] (II) Open ACPI successful (/var/run/acpid.socket)
[ 28.394] (II) LoadModule: "extmod"
[ 28.416] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 28.430] (II) Module extmod: vendor="X.Org Foundation"
[ 28.430] compiled for 1.9.5, module version = 1.0.0
[ 28.430] Module class: X.Org Server Extension
[ 28.430] ABI class: X.Org Server Extension, version 4.0
[ 28.430] (II) Loading extension SELinux
[ 28.430] (II) Loading extension MIT-SCREEN-SAVER
[ 28.430] (II) Loading extension XFree86-VidModeExtension
[ 28.430] (II) Loading extension XFree86-DGA
[ 28.430] (II) Loading extension DPMS
[ 28.430] (II) Loading extension XVideo
[ 28.430] (II) Loading extension XVideo-MotionCompensation
[ 28.430] (II) Loading extension X-Resource
[ 28.430] (II) LoadModule: "dbe"
[ 28.430] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 28.441] (II) Module dbe: vendor="X.Org Foundation"
[ 28.441] compiled for 1.9.5, module version = 1.0.0
[ 28.441] Module class: X.Org Server Extension
[ 28.441] ABI class: X.Org Server Extension, version 4.0
[ 28.441] (II) Loading extension DOUBLE-BUFFER
[ 28.441] (II) LoadModule: "glx"
[ 28.441] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 28.466] (II) Module glx: vendor="X.Org Foundation"
[ 28.466] compiled for 1.9.5, module version = 1.0.0
[ 28.466] ABI class: X.Org Server Extension, version 4.0
[ 28.478] (==) AIGLX enabled
[ 28.478] (II) Loading extension GLX
[ 28.478] (II) LoadModule: "record"
[ 28.478] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 28.479] (II) Module record: vendor="X.Org Foundation"
[ 28.479] compiled for 1.9.5, module version = 1.13.0
[ 28.479] Module class: X.Org Server Extension
[ 28.479] ABI class: X.Org Server Extension, version 4.0
[ 28.479] (II) Loading extension RECORD
[ 28.479] (II) LoadModule: "dri"
[ 28.479] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 28.503] (II) Module dri: vendor="X.Org Foundation"
[ 28.503] compiled for 1.9.5, module version = 1.0.0
[ 28.503] ABI class: X.Org Server Extension, version 4.0
[ 28.503] (II) Loading extension XFree86-DRI
[ 28.503] (II) LoadModule: "dri2"
[ 28.503] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 28.504] (II) Module dri2: vendor="X.Org Foundation"
[ 28.504] compiled for 1.9.5, module version = 1.2.0
[ 28.504] ABI class: X.Org Server Extension, version 4.0
[ 28.504] (II) Loading extension DRI2
[ 28.504] (II) LoadModule: "intel"
[ 28.518] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 28.548] (II) Module intel: vendor="X.Org Foundation"
[ 28.548] compiled for 1.9.4, module version = 2.14.0
[ 28.548] Module class: X.Org Video Driver
[ 28.548] ABI class: X.Org Video Driver, version 8.0
[ 28.548] (II) LoadModule: "evdev"
[ 28.548] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 28.549] (II) Module evdev: vendor="X.Org Foundation"
[ 28.549] compiled for 1.9.4, module version = 2.6.0
[ 28.549] Module class: X.Org XInput Driver
[ 28.549] ABI class: X.Org XInput driver, version 11.0
[ 28.549] (II) LoadModule: "synaptics"
[ 28.550] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 28.570] (II) Module synaptics: vendor="X.Org Foundation"
[ 28.570] compiled for 1.9.4, module version = 1.4.0
[ 28.570] Module class: X.Org XInput Driver
[ 28.570] ABI class: X.Org XInput driver, version 11.0
[ 28.570] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 28.570] (++) using VT number 7
[ 28.570] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 28.570] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 29.953] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 29.953] drmOpenDevice: node name is /dev/dri/card0
[ 29.953] drmOpenDevice: open result is 8, (OK)
[ 30.300] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 30.300] drmOpenDevice: node name is /dev/dri/card0
[ 30.300] drmOpenDevice: open result is 8, (OK)
[ 30.300] drmOpenByBusid: drmOpenMinor returns 8
[ 30.300] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 30.300] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 30.300] (==) intel(0): RGB weight 888
[ 30.300] (==) intel(0): Default visual is TrueColor
[ 30.300] (II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
[ 30.300] (--) intel(0): Chipset: "915GM"
[ 30.300] (**) intel(0): Tiling enabled
[ 30.300] (**) intel(0): SwapBuffers wait enabled
[ 30.300] (==) intel(0): video overlay key set to 0x101fe
[ 30.512] (II) intel(0): Output VGA1 using monitor section Monitor
[ 30.753] (II) intel(0): Output LVDS1 has no monitor section
[ 31.036] (II) intel(0): Output TV1 has no monitor section
[ 31.247] (II) intel(0): EDID for output VGA1
[ 31.503] (II) intel(0): EDID for output LVDS1
[ 31.503] (II) intel(0): Manufacturer: QDS Model: 46 Serial#: 0
[ 31.503] (II) intel(0): Year: 2005 Week: 0
[ 31.503] (II) intel(0): EDID Version: 1.3
[ 31.503] (II) intel(0): Digital Display Input
[ 31.503] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 31.503] (II) intel(0): Gamma: 2.20
[ 31.503] (II) intel(0): No DPMS capabilities specified
[ 31.503] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 31.503] (II) intel(0): First detailed timing is preferred mode
[ 31.503] (II) intel(0): redX: 0.579 redY: 0.340 greenX: 0.310 greenY:
0.550
[ 31.503] (II) intel(0): blueX: 0.154 blueY: 0.153 whiteX: 0.314 whiteY:
0.329
[ 31.503] (II) intel(0): Manufacturer's mask: 0
[ 31.503] (II) intel(0): Supported detailed timing:
[ 31.503] (II) intel(0): clock: 71.2 MHz Image Size: 331 x 207 mm
[ 31.503] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360
h_blank_end 1440 h_border: 0
[ 31.503] (II) intel(0): v_active: 800 v_sync: 802 v_sync_end 808
v_blanking: 823 v_border: 0
[ 31.503] (II) intel(0): Unknown vendor-specific block f
[ 31.503] (II) intel(0): GD738
[ 31.503] (II) intel(0): ???h@
[ 31.503] (II) intel(0): EDID (in hex):
[ 31.503] (II) intel(0): 00ffffffffffff004493460000000000
[ 31.503] (II) intel(0): 000f0103802115780a479994574f8c27
[ 31.503] (II) intel(0): 27505400000001010101010101010101
[ 31.503] (II) intel(0): 010101010101cb1b00a0502017303020
[ 31.504] (II) intel(0): 26004bcf100000180000000f0008002a
[ 31.504] (II) intel(0): 0001000400324a041400000000fe0047
[ 31.504] (II) intel(0): 443733380000000000000000000000fe
[ 31.504] (II) intel(0): 00e0d0c0b89868400001010a2020004a
[ 31.504] (II) intel(0): Not using default mode "320x240" (doublescan mode
not supported)
[ 31.504] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 31.504] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 31.504] (II) intel(0): Not using default mode "512x384" (doublescan mode
not supported)
[ 31.504] (II) intel(0): Not using default mode "640x480" (doublescan mode
not supported)
[ 31.504] (II) intel(0): Not using default mode "640x512" (doublescan mode
not supported)
[ 31.504] (II) intel(0): Not using default mode "800x600" (doublescan mode
not supported)
[ 31.504] (II) intel(0): Not using default mode "896x672" (doublescan mode
not supported)
[ 31.504] (II) intel(0): Not using default mode "928x696" (doublescan mode
not supported)
[ 31.504] (II) intel(0): Not using default mode "960x720" (doublescan mode
not supported)
[ 31.504] (II) intel(0): Not using default mode "576x432" (doublescan mode
not supported)
[ 31.504] (II) intel(0): Not using default mode "680x384" (doublescan mode
not supported)
[ 31.504] (II) intel(0): Not using default mode "680x384" (doublescan mode
not supported)
[ 31.504] (II) intel(0): Not using default mode "700x525" (doublescan mode
not supported)
[ 31.504] (II) intel(0): Not using default mode "720x450" (doublescan mode
not supported)
[ 31.504] (II) intel(0): Not using default mode "800x512" (doublescan mode
not supported)
[ 31.504] (II) intel(0): Not using default mode "840x525" (doublescan mode
not supported)
[ 31.504] (II) intel(0): Not using default mode "840x525" (doublescan mode
not supported)
[ 31.504] (II) intel(0): Not using default mode "960x540" (doublescan mode
not supported)
[ 31.504] (II) intel(0): Not using default mode "960x600" (doublescan mode
not supported)
[ 31.504] (II) intel(0): Not using default mode "1024x768" (doublescan mode
not supported)
[ 31.504] (II) intel(0): Printing probed modes for output LVDS1
[ 31.504] (II) intel(0): Modeline "1280x800"x60.0 71.15 1280 1328 1360
1440 800 802 808 823 -hsync -vsync (49.4 kHz)
[ 31.504] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 31.504] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz)
[ 31.504] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz)
[ 31.504] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz)
[ 31.787] (II) intel(0): EDID for output TV1
[ 31.787] (II) intel(0): Output VGA1 disconnected
[ 31.787] (II) intel(0): Output LVDS1 connected
[ 31.787] (II) intel(0): Output TV1 disconnected
[ 31.787] (II) intel(0): Using exact sizes for initial modes
[ 31.787] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 31.787] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 31.787] (==) intel(0): DPI set to (96, 96)
[ 31.787] (II) Loading sub module "fb"
[ 31.787] (II) LoadModule: "fb"
[ 31.787] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 31.807] (II) Module fb: vendor="X.Org Foundation"
[ 31.807] compiled for 1.9.5, module version = 1.0.0
[ 31.807] ABI class: X.Org ANSI C Emulation, version 0.4
[ 31.807] (==) Depth 24 pixmap format is 32 bpp
[ 31.807] (==) intel(0): VideoRam: 262144 KB
[ 31.808] (II) intel(0): [DRI2] Setup complete
[ 31.808] (II) intel(0): [DRI2] DRI driver: i915
[ 31.808] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192,
tiled
[ 31.838] (II) UXA(0): Driver registered support for the following
operations:
[ 31.838] (II) solid
[ 31.838] (II) copy
[ 31.838] (II) composite (RENDER acceleration)
[ 31.838] (II) put_image
[ 31.838] (II) get_image
[ 31.838] (==) intel(0): Backing store disabled
[ 31.838] (==) intel(0): Silken mouse enabled
[ 31.839] (II) intel(0): Initializing HW Cursor
[ 31.875] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 31.875] (**) intel(0): DPMS enabled
[ 31.875] (==) intel(0): Intel XvMC decoder disabled
[ 31.875] (II) intel(0): Set up textured video
[ 31.875] (II) intel(0): direct rendering: DRI2 Enabled
[ 31.875] (WW) intel(0): Option "Accel" is not used
[ 31.875] (==) intel(0): hotplug detection: "enabled"
[ 31.876] (--) RandR disabled
[ 31.876] (II) Initializing built-in extension Generic Event Extension
[ 31.876] (II) Initializing built-in extension SHAPE
[ 31.876] (II) Initializing built-in extension MIT-SHM
[ 31.876] (II) Initializing built-in extension XInputExtension
[ 31.876] (II) Initializing built-in extension XTEST
[ 31.876] (II) Initializing built-in extension BIG-REQUESTS
[ 31.876] (II) Initializing built-in extension SYNC
[ 31.876] (II) Initializing built-in extension XKEYBOARD
[ 31.876] (II) Initializing built-in extension XC-MISC
[ 31.876] (II) Initializing built-in extension SECURITY
[ 31.876] (II) Initializing built-in extension XINERAMA
[ 31.876] (II) Initializing built-in extension XFIXES
[ 31.876] (II) Initializing built-in extension RENDER
[ 31.876] (II) Initializing built-in extension RANDR
[ 31.876] (II) Initializing built-in extension COMPOSITE
[ 31.876] (II) Initializing built-in extension DAMAGE
[ 31.876] (II) SELinux: Disabled on system
[ 31.979] (EE) AIGLX error: i915 exports no extensions
(/usr/lib/dri/i915_dri.so: undefined symbol: __driDriverExtensions)
[ 31.980] (EE) AIGLX: reverting to software rendering
[ 31.980] (II) AIGLX: Screen 0 is not DRI capable
[ 31.980] (EE) AIGLX error: dlopen of /usr/lib/dri/swrast_dri.so failed
(/usr/lib/dri/swrast_dri.so: cannot open shared object file: No such file or
directory)
[ 31.980] (EE) GLX: could not load software renderer
[ 31.980] (II) GLX: no usable GL providers found for screen 0
[ 31.980] (II) intel(0): Setting screen physical size to 338 x 211
[ 32.951] (**) Option "CoreKeyboard"
[ 32.951] (**) Keyboard: always reports core events
[ 32.951] (**) Keyboard: Device: "/dev/input/event0"
[ 32.951] (--) Keyboard: Found keys
[ 32.951] (II) Keyboard: Configuring as keyboard
[ 32.951] (II) XINPUT: Adding extended input device "Keyboard" (type:
KEYBOARD)
[ 32.951] (**) Option "xkb_rules" "evdev"
[ 32.951] (**) Option "xkb_model" "pc105"
[ 32.951] (**) Option "xkb_layout" "de"
[ 33.070] (**) Option "Device" "/dev/input/event6"
[ 33.070] (--) Mouse: x-axis range 1472 - 5472
[ 33.070] (--) Mouse: y-axis range 1408 - 4448
[ 33.070] (--) Mouse: pressure range 0 - 255
[ 33.070] (--) Mouse: finger width range 0 - 0
[ 33.070] (--) Mouse: buttons: left right middle double triple
[ 33.070] (--) Mouse: invalid finger width range. defaulting to 0 - 16
[ 33.070] (**) Option "VertTwoFingerScroll" "on"
[ 33.070] (**) Option "TapButton1" "1"
[ 33.070] (**) Option "TapButton2" "2"
[ 33.070] (--) Mouse: touchpad found
[ 33.070] (**) Mouse: always reports core events
[ 33.070] (II) XINPUT: Adding extended input device "Mouse" (type: TOUCHPAD)
[ 33.070] (**) Mouse: (accel) MinSpeed is now constant deceleration 2.5
[ 33.070] (**) Mouse: MaxSpeed is now 1.75
[ 33.070] (**) Mouse: AccelFactor is now 0.040
[ 33.070] (**) Mouse: (accel) keeping acceleration scheme 1
[ 33.070] (**) Mouse: (accel) acceleration profile 1
[ 33.070] (**) Mouse: (accel) acceleration factor: 2.000
[ 33.070] (**) Mouse: (accel) acceleration threshold: 4
[ 33.071] (--) Mouse: touchpad found
[ 33.071] (**) Option "Device" "/dev/input/event6"
[ 33.071] (--) Mouse: invalid x-axis range. defaulting to 1615 - 5685
[ 33.071] (--) Mouse: invalid y-axis range. defaulting to 1729 - 4171
[ 33.071] (--) Mouse: invalid pressure range. defaulting to 0 - 256
[ 33.071] (--) Mouse: invalid finger width range. defaulting to 0 - 16
[ 33.071] (**) Option "VertTwoFingerScroll" "on"
[ 33.071] (**) Option "TapButton1" "1"
[ 33.071] (**) Option "TapButton2" "2"
[ 33.071] (--) Mouse: no supported touchpad found
[ 33.071] (EE) Mouse Unable to query/initialize Synaptics hardware.
[ 33.071] (EE) PreInit returned NULL for "Mouse"
[ 33.087] (II) config/udev: Adding input device Video Bus (/dev/input/event1)
[ 33.087] (II) AutoAddDevices is off - not adding device.
[ 33.087] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 33.087] (II) AutoAddDevices is off - not adding device.
[ 33.093] (II) config/udev: Adding input device Power Button
(/dev/input/event4)
[ 33.093] (II) AutoAddDevices is off - not adding device.
[ 33.094] (II) config/udev: Adding input device Lid Switch
(/dev/input/event3)
[ 33.094] (II) AutoAddDevices is off - not adding device.
[ 33.094] (II) config/udev: Adding input device Sleep Button
(/dev/input/event5)
[ 33.094] (II) AutoAddDevices is off - not adding device.
[ 33.095] (II) config/udev: Adding input device HDA Intel Mic at Ext Left
Jack (/dev/input/event7)
[ 33.095] (II) AutoAddDevices is off - not adding device.
[ 33.095] (II) config/udev: Adding input device HDA Intel HP Out at Ext Left
Jack (/dev/input/event8)
[ 33.095] (II) AutoAddDevices is off - not adding device.
[ 33.100] (II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
[ 33.100] (II) AutoAddDevices is off - not adding device.
[ 33.100] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/event6)
[ 33.100] (II) AutoAddDevices is off - not adding device.
[ 33.100] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/mouse0)
[ 33.100] (II) AutoAddDevices is off - not adding device.
[ 33.101] (II) config/udev: Adding input device ACPI Virtual Keyboard Device
(/dev/input/event9)
[ 33.102] (II) AutoAddDevices is off - not adding device.
[ 236.226] (II) Open ACPI successful (/var/run/acpid.socket)
[ 236.680] (II) intel(0): EDID vendor "QDS", prod id 70
[ 236.680] (II) intel(0): Printing DDC gathered Modelines:
[ 236.680] (II) intel(0): Modeline "1280x800"x0.0 71.15 1280 1328 1360
1440 800 802 808 823 -hsync -vsync (49.4 kHz)
[ 236.968] (--) Mouse: touchpad found
udev information:
-----------------
P: /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:21/input/input1/event1
N: input/event1
E: UDEV_LOG=3
E:
DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:21/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=de
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: DMI_VENDOR=Dell Inc.
P: /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:26/input/input2/event2
N: input/event2
E: UDEV_LOG=3
E:
DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:26/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event2
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=de
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: DMI_VENDOR=Dell Inc.
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4
N: input/event4
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=de
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: DMI_VENDOR=Dell Inc.
P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3/event3
N: input/event3
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event3
E: ID_INPUT=1
E: DMI_VENDOR=Dell Inc.
P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5
N: input/event5
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=de
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: DMI_VENDOR=Dell Inc.
P: /devices/pci0000:00/0000:00:1b.0/input/input7/event7
N: input/event7
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input7/event7
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event7
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=Dell Inc.
P: /devices/pci0000:00/0000:00:1b.0/input/input8/event8
N: input/event8
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input8/event8
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event8
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=Dell Inc.
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=de
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: DMI_VENDOR=Dell Inc.
P: /devices/platform/i8042/serio1/input/input6/event6
N: input/event6
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input6/event6
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event6
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
P: /devices/platform/i8042/serio1/input/input6/mouse0
N: input/mouse0
S: input/by-path/platform-i8042-serio-1-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input6/mouse0
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/mouse0
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
P: /devices/virtual/input/input9/event9
N: input/event9
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input9/event9
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event9
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: XKBMODEL=pc105
E: XKBLAYOUT=de
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: DMI_VENDOR=Dell Inc.
DRM Information from dmesg:
---------------------------
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 915GM Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[drm] Initialized drm 1.1.0 20060810
[drm] DAC-6: set mode 640x480 0
[drm] TV-13: set mode NTSC 480i 0
fb1: inteldrmfb frame buffer device
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[drm] LVDS-8: set mode 1280x800 15
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] TV-13: set mode NTSC 480i 0
[drm] TV-13: set mode NTSC 480i 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] TV-13: set mode NTSC 480i 0
[drm] TV-13: set mode NTSC 480i 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] TV-13: set mode NTSC 480i 0
[drm] TV-13: set mode NTSC 480i 0
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.30.bootlogd
Locale: LANG=de_AT@euro, LC_CTYPE=de_AT (charmap=ANSI_X3.4-1968) (ignored:
LC_ALL set to C)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg depends on:
ii libc6 2.11.2-11 Embedded GNU C Library: Shared lib
ii x11-xkb-utils 7.4+1 X11 XKB utilities
ii xkb-data 1.7-1 X Keyboard Extension (XKB) configu
ii xserver-xorg-core 2:1.9.5-1 Xorg X server - core server
ii xserver-xorg-input-evdev [xor 1:2.6.0-2 X.Org X server -- evdev input driv
ii xserver-xorg-input-synaptics 1.4.0-1 Synaptics TouchPad driver for X.Or
ii xserver-xorg-video-intel [xor 2:2.14.0-4 X.Org X server -- Intel i8xx, i9xx
Versions of packages xserver-xorg recommends:
ii libgl1-mesa-dri 7.0.3-7 A free implementation of the OpenG
xserver-xorg suggests no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
