Package: linux-2.6 Version: 2.6.32-30 Severity: normal *** Please type your report below this line *** Hi,
I don't know whether this is a hardware problem or a kernel problem but figured I'd report it. I just upgraded to squeeze and am getting these messages on the console and in dmesg: [31934.320083] Uhhuh. NMI received for unknown reason 3d on CPU 0. [31934.320109] Do you have a strange power saving mode enabled? [31934.320125] Dazed and confused, but trying to continue [36364.673879] Uhhuh. NMI received for unknown reason 2d on CPU 0. [36364.673905] Do you have a strange power saving mode enabled? [36364.673922] Dazed and confused, but trying to continue I first noticed a problem, related or not, a month or so ago after the box crashed, twice over the course of a week, while still running lenny (stock kernel). I've not had a crash before or since but went looking and found (lenny kernel) messages in /var/log/kern.log like: Mar 6 06:41:34 gabby kernel: [2057246.866534] APIC error on CPU0: 04(02) Mar 6 06:42:14 gabby kernel: [2057286.761093] APIC error on CPU0: 02(02) Mar 6 06:42:15 gabby kernel: [2057287.933099] APIC error on CPU0: 02(02) Mar 6 07:15:27 gabby kernel: [2059280.046999] APIC error on CPU0: 02(08) Mar 6 18:56:26 gabby kernel: [2101339.542267] APIC error on CPU0: 08(02) Mar 6 20:09:24 gabby kernel: [2105716.940076] APIC error on CPU0: 02(02) Mar 6 21:51:51 gabby kernel: [2111863.940268] APIC error on CPU0: 02(02) Mar 6 23:56:45 gabby kernel: [2119358.238512] APIC error on CPU0: 02(04) Mar 7 00:05:31 gabby kernel: [2119883.748038] APIC error on CPU0: 04(02) Mar 7 00:08:33 gabby kernel: [2120066.165826] APIC error on CPU0: 02(04) Mar 7 00:08:39 gabby kernel: [2120071.596018] APIC error on CPU0: 04(04) Mar 7 00:09:57 gabby kernel: [2120149.586813] APIC error on CPU0: 04(04) Mar 7 00:10:33 gabby kernel: [2120185.756067] APIC error on CPU0: 04(08) Mar 7 00:14:01 gabby kernel: [2120393.772139] APIC error on CPU0: 08(02) Mar 7 00:19:24 gabby kernel: [2120716.844046] APIC error on CPU0: 02(08) Mar 7 00:23:48 gabby kernel: [2120980.711715] APIC error on CPU0: 08(04) Mar 7 00:24:01 gabby kernel: [2120993.752039] APIC error on CPU0: 04(02) Mar 7 00:24:18 gabby kernel: [2121010.620038] APIC error on CPU0: 02(02) I don't know how long this has been going on. Right around the time of the crash my asterisk setup stopped giving me dial tone -- a problem I've ignored since I'm not using it. I've a card with 4 regular phone jacks in the box. (And now that I've updated to squeeze asterisk has changed the name of the zaptel drivers and the configs are frobbed as a result and I've no time to straighten the problem out.) I don't know if this is related or not. FWIW I googled and came up with this url https://bugzilla.redhat.com/show_bug.cgi?id=676881 claiming that RH has fixed something similar for old 686 chips in 'kernel-2.6.38-0.rc6.git6.1.fc15'. I'm hoping that by reporting early this might get fixed in squeeze. FYI, network addresses and netmask obsfuscated. Thanks for the help. -- Package-specific info: ** Version: Linux version 2.6.32-5-686 (Debian 2.6.32-30) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:01:41 UTC 2011 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-686 root=/dev/mapper/vg00-root ro quiet ** Not tainted ** Kernel log: [ 1.383369] usb usb2: Product: UHCI Host Controller [ 1.383372] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 1.383376] usb usb2: SerialNumber: 0000:00:10.0 [ 1.383693] usb usb2: configuration #1 chosen from 1 choice [ 1.383811] hub 2-0:1.0: USB hub found [ 1.383832] hub 2-0:1.0: 2 ports detected [ 1.383921] uhci_hcd 0000:00:10.1: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 1.383932] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 1.383947] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 1.383973] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800 [ 1.384075] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.384080] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.384084] usb usb3: Product: UHCI Host Controller [ 1.384088] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 1.384091] usb usb3: SerialNumber: 0000:00:10.1 [ 1.384289] usb usb3: configuration #1 chosen from 1 choice [ 1.384399] hub 3-0:1.0: USB hub found [ 1.384418] hub 3-0:1.0: 2 ports detected [ 1.384506] uhci_hcd 0000:00:10.2: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 1.384518] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 1.384531] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 1.384559] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00 [ 1.384625] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.384630] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.384634] usb usb4: Product: UHCI Host Controller [ 1.384638] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 1.384641] usb usb4: SerialNumber: 0000:00:10.2 [ 1.384820] usb usb4: configuration #1 chosen from 1 choice [ 1.384928] hub 4-0:1.0: USB hub found [ 1.384946] hub 4-0:1.0: 2 ports detected [ 1.544474] ata1.00: ATA-7: SAMSUNG SP0411N, TW100-13, max UDMA/100 [ 1.544482] ata1.00: 78242976 sectors, multi 16: LBA48 [ 1.552323] ata1.00: configured for UDMA/100 [ 1.552540] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP0411N TW10 PQ: 0 ANSI: 5 [ 1.716359] ata2.00: ATAPI: LITE-ON CD-ROM LTN-529S, 7S56, max UDMA/33 [ 1.732236] ata2.00: configured for UDMA/33 [ 1.732735] scsi 1:0:0:0: CD-ROM LITE-ON CD-ROM LTN-529S 7S56 PQ: 0 ANSI: 5 [ 1.767960] sd 0:0:0:0: [sda] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB) [ 1.768090] sd 0:0:0:0: [sda] Write Protect is off [ 1.768096] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.768136] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.768387] sda:sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray [ 1.771910] Uniform CD-ROM driver Revision: 3.20 [ 1.772595] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.773391] sda1 sda2 < sda5 > [ 1.779402] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.808111] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.808963] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.076085] device-mapper: uevent: version 1.0.3 [ 2.077159] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-de...@redhat.com [ 2.461882] PM: Starting manual resume from disk [ 2.461892] PM: Resume from partition 254:1 [ 2.461895] PM: Checking hibernation image. [ 2.462212] PM: Error -22 checking image file [ 2.462216] PM: Resume from disk failed. [ 2.501976] kjournald starting. Commit interval 5 seconds [ 2.501996] EXT3-fs: mounted filesystem with ordered data mode. [ 4.098700] udev[302]: starting version 164 [ 4.629324] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 4.629340] ACPI: Power Button [PWRB] [ 4.629445] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 4.629458] ACPI: Sleep Button [SLPB] [ 4.629591] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 4.629597] ACPI: Power Button [PWRF] [ 4.629785] processor LNXCPU:00: registered as cooling_device1 [ 4.658336] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 4.659688] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 4.826696] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.923932] NET: Registered protocol family 23 [ 4.926074] parport_pc 00:09: reported by Plug and Play ACPI [ 4.926191] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [ 5.666583] Error: Driver 'pcspkr' is already registered, aborting... [ 5.739550] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 [ 5.739557] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 5.739575] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 5.739745] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 7.064735] EXT3 FS on dm-0, internal journal [ 7.237627] loop: module loaded [ 7.714911] Adding 1642488k swap on /dev/mapper/vg00-swap_1. Priority:-1 extents:1 across:1642488k [ 8.019769] kjournald starting. Commit interval 5 seconds [ 8.019927] EXT3 FS on sda1, internal journal [ 8.019936] EXT3-fs: mounted filesystem with ordered data mode. [ 8.631104] eth0: link up, 100Mbps, half-duplex, lpa 0x40A1 [ 18.856014] eth0: no IPv6 routers present [ 542.745186] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 542.747910] SGI XFS Quota Management subsystem [ 542.773865] JFS: nTxBlock = 4906, nTxLock = 39252 [ 542.851425] NTFS driver 2.1.29 [Flags: R/W MODULE]. [ 542.937625] QNX4 filesystem 0.2.3 registered. [ 543.030370] Btrfs loaded [ 1504.000079] ata1: lost interrupt (Status 0x50) [ 1504.000132] sd 0:0:0:0: [sda] Unhandled error code [ 1504.000136] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT [ 1504.000142] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 0e 1e 7e 00 00 08 00 [ 1504.000156] end_request: I/O error, dev sda, sector 925310 [ 1504.000219] Buffer I/O error on device dm-0, logical block 53356 [ 1504.000264] lost page write due to I/O error on dm-0 [31934.320083] Uhhuh. NMI received for unknown reason 3d on CPU 0. [31934.320109] Do you have a strange power saving mode enabled? [31934.320125] Dazed and confused, but trying to continue ** Model information not available ** Loaded modules: Module Size Used by btrfs 366823 0 zlib_deflate 15822 1 btrfs crc32c 2172 1 libcrc32c 762 1 btrfs ufs 56158 0 qnx4 5118 0 hfsplus 61001 0 hfs 33093 0 minix 17814 0 ntfs 163909 0 vfat 6570 0 msdos 5118 0 fat 34912 2 vfat,msdos jfs 134664 0 xfs 417005 0 exportfs 2618 1 xfs reiserfs 176190 0 ext4 257803 0 jbd2 56155 1 ext4 crc16 1027 1 ext4 ext2 46293 0 loop 9765 0 snd_via82xx 15256 0 gameport 6061 1 snd_via82xx snd_ac97_codec 79148 1 snd_via82xx ac97_bus 710 1 snd_ac97_codec snd_mpu401_uart 4067 1 snd_via82xx snd_pcm 47226 2 snd_via82xx,snd_ac97_codec snd_rawmidi 12513 1 snd_mpu401_uart snd_seq_device 3673 1 snd_rawmidi snd_timer 12258 1 snd_pcm snd 34375 7 snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_pcm,snd_rawmidi,snd_seq_device,snd_timer soundcore 3450 1 snd i2c_viapro 4419 0 i2c_core 12696 1 i2c_viapro snd_page_alloc 5045 2 snd_via82xx,snd_pcm via_ircc 13311 0 parport_pc 15799 0 irda 75956 1 via_ircc shpchp 21220 0 evdev 5609 4 parport 22554 1 parport_pc pcspkr 1207 0 pci_hotplug 18065 1 shpchp crc_ccitt 1039 1 irda button 3598 0 processor 26327 0 ext3 94212 2 jbd 32169 1 ext3 mbcache 3762 3 ext4,ext2,ext3 dm_mod 46082 6 sg 15968 0 sr_mod 10770 0 sd_mod 25977 3 crc_t10dif 1012 1 sd_mod cdrom 26487 1 sr_mod ata_generic 2067 0 uhci_hcd 16057 0 fan 2586 0 pata_via 5701 3 ehci_hcd 27851 0 thermal 9206 0 libata 115753 2 ata_generic,pata_via via_rhine 14627 0 thermal_sys 9378 3 processor,fan,thermal usbcore 98453 3 uhci_hcd,ehci_hcd mii 2714 1 via_rhine nls_base 4541 7 hfsplus,hfs,ntfs,vfat,fat,jfs,usbcore scsi_mod 101429 4 sg,sr_mod,sd_mod,libata ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address xxx.xxx.xxx.xxx netmask 255.255.255.0 network xxx.xxx.xxx.xxx broadcast xxx.xxx.xxx.xxx gateway xxx.xxx.xxx.xxx # dns-* options are implemented by the resolvconf package, if installed dns-nameservers xxx.xxx.xxx.xxx dns-search meme.com ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 link/ether 00:e0:4c:e0:7a:8c brd ff:ff:ff:ff:ff:ff inet xxx.xxx.xxx.xxx/yy brd xxx.xxx.xxx.xxx scope global eth0 inet6 fe80::2e0:4cff:fee0:7a8c/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 8842 74 0 0 0 0 0 0 8842 74 0 0 0 0 0 0 eth0: 9847457 15943 0 0 0 0 0 0 1399666 10114 22 0 0 2645 22 0 *** Protocol statistics: Ip: 15676 total packets received 0 forwarded 0 incoming packets discarded 15662 incoming packets delivered 9915 requests sent out 28 reassemblies required 14 packets reassembled ok Icmp: 193 ICMP messages received 0 input ICMP message failed. ICMP input histogram: echo requests: 193 195 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 2 echo replies: 193 IcmpMsg: InType8: 193 OutType0: 193 OutType3: 2 Tcp: 22 active connections openings 5 passive connection openings 4 failed connection attempts 0 connection resets received 1 connections established 15065 segments received 9313 segments send out 0 segments retransmited 0 bad segments received. 26 resets sent Udp: 402 packets received 2 packets to unknown port received. 0 packet receive errors 407 packets sent UdpLite: TcpExt: 2 TCP sockets finished time wait in fast timer 28 delayed acks sent 5 packets directly queued to recvmsg prequeue. 8650 packet headers predicted 149 acknowledgments not containing data payload received 5265 predicted acknowledgments 5 connections reset due to unexpected data IpExt: InOctets: 9617411 OutOctets: 1259804 *** Device features: eth0: 0x0 lo: 0x13865 ** PCI devices: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge [1106:3205] Subsystem: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge [1106:3205] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 8 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] Capabilities: <access denied> Kernel driver in use: agpgart-via 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: dc000000-ddffffff Prefetchable memory behind bridge: d8000000-dbffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:08.0 Communication controller [0780]: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface [e159:0001] Subsystem: Device [b119:0003] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (250ns min, 32000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at d000 [size=256] Region 1: Memory at de000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI]) Subsystem: Biostar Microtech Int'l Corp Device [1565:3204] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at d400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI]) Subsystem: Biostar Microtech Int'l Corp Device [1565:3204] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at d800 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI]) Subsystem: Biostar Microtech Int'l Corp Device [1565:3204] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 21 Region 4: I/O ports at dc00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:10.3 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 82) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device [1565:3204] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 21 Region 0: Memory at de001000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8235 ISA Bridge [1106:3177] Subsystem: VIA Technologies, Inc. VT8235 ISA Bridge [1106:3177] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:11.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device [1565:3204] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 20 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at e000 [size=16] Capabilities: <access denied> Kernel driver in use: pata_via 00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 50) Subsystem: Biostar Microtech Int'l Corp Device [1565:8714] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 22 Region 0: I/O ports at e400 [size=256] Capabilities: <access denied> Kernel driver in use: VIA 82xx Audio 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 74) Subsystem: Biostar Microtech Int'l Corp Device [1565:2200] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 23 Region 0: I/O ports at e800 [size=256] Region 1: Memory at de002000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: via-rhine 01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. KM400/KN400/P4M800 [S3 UniChrome] [1106:7205] (rev 01) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device [1565:1200] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min) Interrupt: pin A routed to IRQ 11 Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M] Region 1: Memory at dc000000 (32-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at dd000000 [disabled] [size=64K] Capabilities: <access denied> ** USB devices: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-686 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs ii linux-base 2.6.32-30 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-686 recommends: ii firmware-linux-free 2.6.32-30 Binary firmware for various driver ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib Versions of packages linux-image-2.6.32-5-686 suggests: ii grub 0.97-64 GRand Unified Bootloader (dummy pa pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686: linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
