Package: mpd
Severity: normal

Thanks for your reply.

Right now I'm forced to use my wireless Huawei, on which bug does not
shows. I will be able to hook to wired connection on Easter. Then I will
try to reproduce a bug and provide additional info.

I'm attaching /etc/network/interfaces (as you can see, it's mostly
commented out) and ifconfig output (but it's not on wired connection, so 
perhaps not very helpful).

Since my /etc/hosts is 16k lines (it provides basic spam filtering), I
put it on my web:
http://minio.komunikatory.pl/pliki/etc-hosts

Neither of files has been changed since I reported a bug.

Cheers
Mirosław Zalewski

*** /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
#allow-hotplug eth0
#auto eth0
#iface eth1 inet static
#iface eth0 inet static
#       address 192.168.66.66
#       netmask 255.255.255.0
#       network 192.168.66.0
#       broadcast 192.168.66.255
#       gateway 192.168.66.1
#       address 10.0.0.234
#       netmask 255.0.0.0
#       network 10.0.0.0
#       broadcast 255.255.255.255
#       gateway 10.0.0.2
#       # dns-* options are implemented by the resolvconf package, if installed
#       dns-nameservers 194.204.152.34
#       dns-search place.you.dont.want.to.be

*** /tmp/ifconfig
eth0      Link encap:Ethernet  HWaddr 00:26:6c:61:11:ac  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:29 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:201 errors:0 dropped:0 overruns:0 frame:0
          TX packets:201 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:36633 (35.7 KiB)  TX bytes:36633 (35.7 KiB)

ppp0      Link encap:Point-to-Point Protocol  
          inet addr:188.33.98.91  P-t-P:10.64.64.64  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:22670 errors:0 dropped:0 overruns:0 frame:0
          TX packets:18552 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:3 
          RX bytes:21739552 (20.7 MiB)  TX bytes:2534137 (2.4 MiB)

wlan0     Link encap:Ethernet  HWaddr 00:26:b6:e5:80:22  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)



-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) (ignored: LC_ALL 
set to pl_PL.UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages mpd depends on:
ii  adduser          3.112+nmu2              add and remove users and groups
ii  libao4           1.0.0-5                 Cross Platform Audio Output Librar
ii  libasound2       1.0.23-2.1              shared library for ALSA applicatio
ii  libaudiofile0    0.2.6-8                 Open-source version of SGI's audio
ii  libavcodec52     5:0.6.1+svn20101128-0.2 library to encode decode multimedi
ii  libavformat52    5:0.6.1+svn20101128-0.2 ffmpeg file format library
ii  libavutil49      4:0.5.2-6               ffmpeg utility library
ii  libc6            2.11.2-11               Embedded GNU C Library: Shared lib
ii  libcurl3-gnutls  7.21.3-1                Multi-protocol file transfer libra
ii  libfaad2         2.7-6                   freeware Advanced Audio Decoder - 
ii  libflac8         1.2.1-3                 Free Lossless Audio Codec - runtim
ii  libglib2.0-0     2.24.2-1                The GLib library of C routines
ii  libid3tag0       0.15.1b-10              ID3 tag reading library from the M
ii  libjack-jackd2-0 1.9.6~dfsg.1-2          JACK Audio Connection Kit (librari
ii  libmad0          0.15.1b-5               MPEG audio decoder library
ii  libmms0          0.6.2-1                 MMS stream protocol library - shar
ii  libmpcdec6       2:0.1~r459-1            MusePack decoder - library
ii  libogg0          1.2.0~dfsg-1            Ogg bitstream library
ii  libpulse0        0.9.21-4                PulseAudio client libraries
ii  libsamplerate0   0.1.7-3                 Audio sample rate conversion libra
ii  libshout3        2.2.2-5+b1              MP3/Ogg Vorbis broadcast streaming
ii  libsqlite3-0     3.7.4-2                 SQLite 3 shared library
ii  libvorbis0a      1.3.2-1                 The Vorbis General Audio Compressi
ii  libvorbisenc2    1.3.2-1                 The Vorbis General Audio Compressi
ii  libvorbisfile3   1.3.2-1                 The Vorbis General Audio Compressi
ii  libwavpack1      4.60.1-1                an audio codec (lossy and lossless

mpd recommends no packages.

Versions of packages mpd suggests:
pn  avahi-daemon                  <none>     (no description available)
pn  icecast2                      <none>     (no description available)
ii  mpc [mpd-client]              0.19-2     A command-line tool to interface M
ii  mpdscribble [mpd-client]      0.21-1     Last.fm reporting client for mpd
ii  ncmpcpp [mpd-client]          0.5.4-1    ncurses-based client for the Music
pn  pulseaudio                    <none>     (no description available)

-- Configuration Files:
/etc/default/mpd changed [not included]
/etc/mpd.conf changed [not included]

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Reply via email to