Package: linux-2.6 Version: 2.6.32-30~bpo50+1 Severity: important
Hello, This problem may well reside in X or gnome, but unfortunately they aren't reporting anything, while the kernel (drm module) is. I'm using a keyboard-video-mouse (KVM) switch to switch between a number of computers; before squeeze, this worked brilliantly. Since upgrading to squeeze, a few minutes after I switch to another computer, my squeeze install kills X completely. All I'm seeing is the following in /var/log/syslog: Feb 16 12:00:11 mouse kernel: [826528.890150] Feb 16 12:00:12 mouse kernel: [826528.992844] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130 Feb 16 12:00:12 mouse kernel: [826528.992851] [drm:edid_is_valid] *ERROR* Raw EDID: Feb 16 12:00:12 mouse kernel: [826528.992857] <3>00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff ................ Feb 16 12:00:12 mouse kernel: [826528.992863] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ Feb 16 12:00:12 mouse kernel: [826528.992869] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ Feb 16 12:00:12 mouse kernel: [826528.992874] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ Feb 16 12:00:12 mouse kernel: [826528.992880] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ Feb 16 12:00:12 mouse kernel: [826528.992885] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ Feb 16 12:00:12 mouse kernel: [826528.992891] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ Feb 16 12:00:12 mouse kernel: [826528.992896] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ ... the above repeats eight times at 0.1 second intervals, and is followed by this (the messages appear to come from drivers/gpu/drm/ drm_edid.c): Feb 16 12:00:12 mouse kernel: [826528.992901] Feb 16 12:00:12 mouse kernel: [826528.992907] i915 0000:00:02.0: DVI-D-1: EDID invalid. I'm getting nothing in /var/log/Xorg.0.log or /var/log/gdm/:0.log.1. Xorg.0.log does record successful identification of the monitor though (I *'ed out its Serial#): (II) intel(0): EDID for output DVI1 (II) intel(0): Manufacturer: HWP Model: 2615 Serial#: ******** [..] (II) intel(0): Monitor name: hp L2335 All processes associated with my login vanish at this point, and when I switch back to the computer running squeeze, the monitor detects no signal and goes into standby. I can "recover" by hitting control-alt-F1 (this does not bring the display back), logging in blind as root and running '/etc/init.d/gdm restart'. My hardware comprises a Mac mini: 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) .. connected to an Avocent Switchview DVI connected to an HP L2335 monitor. A similar problem has turned up in Microsoft Windows 7, where continuous checking of EDID results in the OS switching to default monitor resolution after the user switches away (or even turns off their monitor in some cases). Microsoft apparently blame this on obsolete KVM hardware and AFAICS have not offered a facility to disable the continuous checking; I hope there might be a means of disabling the check in Debian though, or remembering the last valid EDID rather than failing catastrophically on receipt of an invalid one? The consequences are severe, as my entire login is just killed stone dead: all processes gone, all work lost. http://social.answers.microsoft.com/Forums/en-US/w7hardware/thread/84f41660-1933-4109-9b13-1ea8a1c27be7 Regards, Conrad -- Package-specific info: ** Version: Linux version 2.6.32-bpo.5-686 (Debian 2.6.32-30~bpo50+1) (norb...@tretkowski.de) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Tue Jan 18 23:27:36 UTC 2011 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.32-bpo.5-686 root=/dev/mapper/mouse-root ro ** Not tainted ** Kernel log: [828620.852437] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [828620.852443] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [828620.852448] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [828620.852455] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [828620.852460] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [828620.852465] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [828620.852470] [828620.852476] i915 0000:00:02.0: DVI-D-1: EDID invalid. [831256.449906] opera[5403]: segfault at 6e ip 086eac5b sp bfc426d0 error 6 in opera[8048000+f41000] [831709.853927] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130 [831709.853936] [drm:edid_is_valid] *ERROR* Raw EDID: [831709.853943] <3>00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff ................ [831709.853949] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831709.853954] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831709.853960] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831709.853965] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831709.853971] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831709.853976] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831709.853982] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831709.853986] [831709.955792] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130 [831709.955799] [drm:edid_is_valid] *ERROR* Raw EDID: [831709.955806] <3>00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff ................ [831709.955811] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831709.955817] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831709.955823] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831709.955828] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831709.955834] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831709.955839] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831709.955845] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831709.955849] [831710.057765] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130 [831710.057773] [drm:edid_is_valid] *ERROR* Raw EDID: [831710.057780] <3>00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff ................ [831710.057786] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.057791] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.057796] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.057802] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.057807] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.057813] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.057818] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.057823] [831710.159843] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130 [831710.159851] [drm:edid_is_valid] *ERROR* Raw EDID: [831710.159857] <3>00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff ................ [831710.159863] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.159869] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.159874] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.159880] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.159885] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.159891] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.159896] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.159901] [831710.159907] i915 0000:00:02.0: DVI-D-1: EDID invalid. [831710.302999] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130 [831710.303007] [drm:edid_is_valid] *ERROR* Raw EDID: [831710.303014] <3>00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff ................ [831710.303020] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.303025] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.303031] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.303036] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.303042] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.303047] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.303053] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.303057] [831710.405368] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130 [831710.405375] [drm:edid_is_valid] *ERROR* Raw EDID: [831710.405381] <3>00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff ................ [831710.405387] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.405392] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.405398] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.405403] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.405409] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.405414] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.405420] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.405424] [831710.509017] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130 [831710.509022] [drm:edid_is_valid] *ERROR* Raw EDID: [831710.509026] <3>00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff ................ [831710.509030] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.509033] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.509036] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.509040] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.509043] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.509046] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.509050] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.509052] [831710.610988] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 130 [831710.610992] [drm:edid_is_valid] *ERROR* Raw EDID: [831710.610996] <3>00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff ................ [831710.611000] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.611003] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.611006] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.611010] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.611013] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.611016] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.611020] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [831710.611022] [831710.611026] i915 0000:00:02.0: DVI-D-1: EDID invalid. [834246.906700] opera[7184]: segfault at 6e ip 086eac5b sp bfbda3c0 error 6 in opera[8048000+f41000] ** Model information not available ** Loaded modules: Module Size Used by nls_utf8 908 0 isofs 24608 0 udf 63050 0 nfs 207290 1 lockd 49505 1 nfs fscache 24722 1 nfs nfs_acl 1695 1 nfs auth_rpcgss 25296 1 nfs sunrpc 134916 13 nfs,lockd,nfs_acl,auth_rpcgss i915 222350 2 drm_kms_helper 18321 1 i915 drm 112096 3 i915,drm_kms_helper i2c_algo_bit 3497 1 i915 parport_pc 15799 0 ppdev 4058 0 lp 5570 0 parport 22550 3 parport_pc,ppdev,lp sco 5861 2 bridge 33055 0 stp 996 1 bridge bnep 7460 2 acpi_cpufreq 4955 1 rfcomm 25195 8 cpufreq_userspace 1488 0 l2cap 21705 16 bnep,rfcomm cpufreq_powersave 602 0 crc16 1027 1 l2cap cpufreq_stats 1940 0 cpufreq_conservative 4018 0 binfmt_misc 4915 1 fuse 44101 1 visor 10158 0 usbserial 21863 1 visor firewire_sbp2 9667 0 loop 9777 0 arc4 974 2 ecb 1405 2 snd_hda_codec_idt 35313 1 ath5k 104170 0 snd_hda_intel 16819 1 mac80211 123422 1 ath5k snd_hda_codec 46002 2 snd_hda_codec_idt,snd_hda_intel ath 6022 1 ath5k snd_hwdep 4054 1 snd_hda_codec snd_pcm 47202 2 snd_hda_intel,snd_hda_codec btusb 8077 2 snd_seq 35491 0 tpm_infineon 6067 0 applesmc 15702 0 bluetooth 36339 9 sco,bnep,rfcomm,l2cap,btusb snd_timer 12238 2 snd_pcm,snd_seq tpm 8145 1 tpm_infineon video 14621 1 i915 cfg80211 87821 3 ath5k,mac80211,ath snd_seq_device 3673 1 snd_seq pcspkr 1207 0 tpm_bios 3573 1 tpm i2c_i801 6462 0 button 3598 1 i915 output 1204 1 video input_polldev 1479 1 applesmc joydev 6719 0 rng_core 2178 0 processor 26347 3 acpi_cpufreq i2c_core 12700 5 i915,drm_kms_helper,drm,i2c_algo_bit,i2c_i801 snd 34395 10 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device soundcore 3450 1 snd rfkill 10280 4 bluetooth,cfg80211 snd_page_alloc 5065 2 snd_hda_intel,snd_pcm evdev 5609 19 led_class 1757 2 ath5k,applesmc ext3 94320 2 jbd 32213 1 ext3 mbcache 3766 1 ext3 sha256_generic 10748 2 aes_i586 6816 2 aes_generic 25738 1 aes_i586 cbc 2047 1 usbhid 28040 0 hid 50885 1 usbhid dm_crypt 9280 1 dm_mod 46138 9 dm_crypt sg 15980 0 sd_mod 25997 3 sr_mod 10770 0 crc_t10dif 1012 1 sd_mod cdrom 26487 1 sr_mod ata_generic 2067 0 thermal 9198 0 firewire_ohci 16733 0 ata_piix 17712 2 thermal_sys 9378 3 video,processor,thermal sky2 34016 0 libata 115793 2 ata_generic,ata_piix firewire_core 31291 2 firewire_sbp2,firewire_ohci crc_itu_t 1035 2 udf,firewire_core uhci_hcd 16069 0 ehci_hcd 27927 0 scsi_mod 101481 5 firewire_sbp2,sg,sd_mod,sr_mod,libata usbcore 98521 7 visor,usbserial,btusb,usbhid,uhci_hcd,ehci_hcd nls_base 4541 4 nls_utf8,isofs,udf,usbcore ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) Subsystem: Intel Corporation Device [8086:7270] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at 90380000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 20f0 [size=8] Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at 90400000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:07.0 Performance counters [1101]: Intel Corporation Device [8086:27a3] (rev 03) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 10 Region 0: Memory at 90444000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: SigmaTel Device [8384:7680] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at 90440000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: 90200000-902fffff Prefetchable memory behind bridge: 0000000090500000-00000000906fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: 90100000-901fffff Prefetchable memory behind bridge: 0000000090700000-00000000908fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at 20a0 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 2080 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 2060 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at 2040 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) Subsystem: Intel Corporation Device [8086:7270] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 0: Memory at 90445400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 Memory behind bridge: 90000000-900fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt, intel-rng 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 20c0 [size=16] Kernel driver in use: ata_piix Kernel modules: ata_piix 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 20d8 [size=8] Region 1: I/O ports at 20fc [size=4] Region 2: I/O ports at 20d0 [size=8] Region 3: I/O ports at 20f8 [size=4] Region 4: I/O ports at 2020 [size=16] Region 5: Memory at 90445000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at efa0 [size=32] Kernel modules: i2c-i801 01:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 22) Subsystem: Marvell Technology Group Ltd. Marvell RDK-8053 [11ab:5321] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 26 Region 0: Memory at 90200000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at 1000 [size=256] Expansion ROM at 90500000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: sky2 Kernel modules: sky2 02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01) Subsystem: Apple Computer Inc. Device [106b:0086] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at 90100000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath5k Kernel modules: ath5k 03:03.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev 61) (prog-if 10 [OHCI]) Subsystem: Agere Systems FW322/323 [11c1:5811] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B+ DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 248 (3000ns min, 6000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci ** USB devices: Bus 005 Device 004: ID 05ac:8205 Apple, Inc. Bluetooth HCI Bus 005 Device 003: ID 05ac:8240 Apple, Inc. IR Receiver [built-in] Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 1038:1360 Ideazon, Inc. Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 006: ID 10d5:5552 Uni Class Technology Co., Ltd Bus 001 Device 002: ID 04cc:1520 ST-Ericsson Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0 APT prefers stable APT policy: (700, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.32-bpo.5-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-bpo.5-686 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs ii linux-base 2.6.32-30 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-bpo.5-686 recommends: ii firmware-linux-free 2.6.32-30 Binary firmware for various driver ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib Versions of packages linux-image-2.6.32-bpo.5-686 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-bpo.5-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.32-bpo.5-686/postinst/depmod-error-initrd-2.6.32-bpo.5-686: false linux-image-2.6.32-bpo.5-686/postinst/ignoring-do-bootloader-2.6.32-bpo.5-686: linux-image-2.6.32-bpo.5-686/prerm/removing-running-kernel-2.6.32-bpo.5-686: true linux-image-2.6.32-bpo.5-686/postinst/missing-firmware-2.6.32-bpo.5-686: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
