> The message you quoted is from the i915 driver, which isn't used on i810
> hw. Please provide a proper report with full dmesg, full Xorg log,
> lspci, and description of what you're doing to trigger the hang.
right, it`s not i810 but a chipset that previously used the i810 driver (on
lenny). the device is:
"Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
the bug is not reproducable, but it seems that it happens when you do something
that lends itself to hardware acceleration. like scrolling.
from what I can see this has been reported to Xorg and the kernel mailing list,
you can find more reports by the "dmesg" output I quoted.
lspci:
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE
Chipset Integrated Graphics Device (rev 01)
Xorg.log:
(--) PCI:*(0:0:2:0) 8086:2562:1028:0126 Intel Corporation
82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 1, Mem @
0xf0000000/134217728, 0xff680000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in
the config file.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in
the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in
the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.13.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
(II) Primary Device is: PCI 0...@00:02:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(**) intel(0): Depth 16, (--) framebuffer bpp 16
(==) intel(0): RGB weight 565
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 845G
(--) intel(0): Chipset: "845G"
(==) intel(0): Shadow buffer enabled, GPU acceleration disabled.
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): video overlay key set to 0x83e
(II) intel(0): Output VGA1 using monitor section hp L2035
(II) intel(0): EDID for output VGA1
(II) intel(0): Manufacturer: HWP Model: 2612 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 21
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) intel(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync
Pulse req. if CompSync or SyncOnGreen
(II) intel(0): Max Image Size [cm]: horiz.: 41 vert.: 31
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.638 redY: 0.342 greenX: 0.293 greenY: 0.609
(II) intel(0): blueX: 0.147 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported established timings:
(II) intel(0): 720x...@70hz
(II) intel(0): 640x...@60hz
(II) intel(0): 640x...@75hz
(II) intel(0): 800x...@60hz
(II) intel(0): 800x...@75hz
(II) intel(0): 832x...@75hz
(II) intel(0): 1024x...@60hz
(II) intel(0): 1024x...@70hz
(II) intel(0): 1024x...@75hz
(II) intel(0): 1280x1...@75hz
(II) intel(0): 1152x...@75hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) intel(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) intel(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) intel(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #5: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) intel(0): #6: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) intel(0): #7: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 162.0 MHz Image Size: 408 x 306 mm
(II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160
h_border: 0
(II) intel(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250
v_border: 0
(II) intel(0): Ranges: V min: 48 V max: 85 Hz, H min: 30 H max: 94 kHz,
PixClock max 215 MHz
(II) intel(0): Monitor name: hp L2035
(II) intel(0): EDID vendor "HWP", prod id 9746
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201
1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500
-hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525
-hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449
-hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025
1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769
772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771
777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628
667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865
868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509
-hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604
631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769
772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961
964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025
1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025
1028 1072 +hsync +vsync (91.1 kHz)
(II) intel(0): Modeline "1600x1200"x0.0 202.50 1600 1664 1856 2160 1200 1201
1204 1250 +hsync +vsync (93.8 kHz)
(II) intel(0): Printing probed modes for output VGA1
(II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200
1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "1600x1200"x75.0 205.99 1600 1720 1896 2192 1200
1201 1204 1253 -hsync +vsync (94.0 kHz)
(II) intel(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024
1025 1028 1072 +hsync +vsync (91.1 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024
1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024
1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961
964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865
868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769
772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769
772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771
777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628
667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604
631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484
509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484
500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414
449 -hsync +vsync (31.5 kHz)
(II) intel(0): Output VGA1 connected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output VGA1 using initial mode 1600x1200
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): Kernel page flipping support detected, enabling
(**) intel(0): Display dimensions: (410, 310) mm
(**) intel(0): DPI set to (99, 98)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(WW) intel(0): VideoRam configuration found, which is no longer used.
(II) intel(0): Continuing with (ignored) 0kB VideoRam instead of 16384 kB.
(**) intel(0): VideoRam: 131072 KB
(WW) intel(0): cannot enable DRI2 whilst forcing software fallbacks
(II) intel(0): Allocated new frame buffer 1600x1200 stride 4096, tiled
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) put_image
(II) get_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Failed
(WW) intel(0): Option "NoAccel" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 423 x 317
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(II) config/udev: Adding input device Power Button (/dev/input/event0)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(II) config/udev: Adding input device Logitech Optical USB Mouse
(/dev/input/event3)
(**) Logitech Optical USB Mouse: Applying InputClass "evdev pointer catchall"
(**) Logitech Optical USB Mouse: always reports core events
(**) Logitech Optical USB Mouse: Device: "/dev/input/event3"
(II) Logitech Optical USB Mouse: Found 3 mouse buttons
(II) Logitech Optical USB Mouse: Found scroll wheel(s)
(II) Logitech Optical USB Mouse: Found relative axes
(II) Logitech Optical USB Mouse: Found x and y relative axes
(II) Logitech Optical USB Mouse: Configuring as mouse
(**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia:
10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type:
MOUSE)
(II) Logitech Optical USB Mouse: initialized for relative axes.
(II) config/udev: Adding input device Logitech Optical USB Mouse
(/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device USB USB Keykoard (/dev/input/event4)
(**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
(**) USB USB Keykoard: always reports core events
(**) USB USB Keykoard: Device: "/dev/input/event4"
(II) USB USB Keykoard: Found keys
(II) USB USB Keykoard: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(II) config/udev: Adding input device USB USB Keykoard (/dev/input/event5)
(**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
(**) USB USB Keykoard: always reports core events
(**) USB USB Keykoard: Device: "/dev/input/event5"
(II) USB USB Keykoard: Found 1 mouse buttons
(II) USB USB Keykoard: Found scroll wheel(s)
(II) USB USB Keykoard: Found relative axes
(II) USB USB Keykoard: Found absolute axes
(II) USB USB Keykoard: Found keys
(II) USB USB Keykoard: Configuring as mouse
(II) USB USB Keykoard: Configuring as keyboard
(**) USB USB Keykoard: YAxisMapping: buttons 4 and 5
(**) USB USB Keykoard: EmulateWheelButton: 4, EmulateWheelInertia: 10,
EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(EE) USB USB Keykoard: failed to initialize for relative axes.
(II) USB USB Keykoard: initialized for absolute axes.
(II) config/udev: Adding input device PC Speaker (/dev/input/event2)
(II) No input driver/identifier specified (ignoring)
(II) intel(0): EDID vendor "HWP", prod id 9746
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201
1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500
-hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525
-hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449
-hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025
1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769
772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771
777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628
667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865
868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509
-hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604
631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769
772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961
964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025
1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025
1028 1072 +hsync +vsync (91.1 kHz)
(II) intel(0): Modeline "1600x1200"x0.0 202.50 1600 1664 1856 2160 1200 1201
1204 1250 +hsync +vsync (93.8 kHz)
(II) intel(0): EDID vendor "HWP", prod id 9746
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
--
<html><head>
<title>DEREFER</title>
<META HTTP-EQUIV="REFRESH" CONTENT="0; URL=http://www.gmx.net/?status=hinweis";>
</head>
<body bgcolor="#ffffff" link="#666666" vlink="#666666">
<table width="100%" height="100%" border="0"><tr><td align="center"><a
href="http://www.gmx.net/?status=hinweis";><font face="Arial, Helvetica,
sans-serif" size="2" color="#666666">Einen Moment bitte, die angeforderte Seite
wird geladen...</font></a></td></tr></table>
</body></html>
Neu: GMX De-Mail - Einfach wie E-Mail, sicher wie ein Brief!
Jetzt De-Mail-Adresse reservieren: http://portal.gmx.net/de/go/demail
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
