Package: smartmontools Version: 5.39.1+svn3124-1 Severity: normal I get errors on smartctl execution:
smartctl -a /dev/sda smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: OCZ Vertex SSD Device Model: OCZ-VERTEX2 Serial Number: .... Firmware Version: 1.11 User Capacity: 60.022.480.896 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Sun Oct 24 19:42:05 2010 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7f) SMART execute Offline immediate. Auto Offline data collection on/off support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f --- --- --- Pre-fail Always - 4666526360432 5 Reallocated_Sector_Ct 0x0033 094 094 003 Pre-fail Always - 576 9 Power_On_Hours 0x0032 --- --- --- Old_age Always - 8846195568072221796 12 Power_Cycle_Count 0x0032 --- --- --- Old_age Always - 4875364 171 Unknown_Attribute 0x0000 000 000 000 Old_age Offline - 0 172 Unknown_Attribute 0x0000 000 000 000 Old_age Offline - 0 174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 4 177 Wear_Leveling_Count 0x0000 000 000 --- Old_age Offline - 0 177 Wear_Leveling_Count <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO 181 Program_Fail_Cnt_Total <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA 181 Program_Fail_Cnt_Total 0x0000 000 000 --- Old_age Offline - 0 181 Program_Fail_Cnt_Total <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO 182 Erase_Fail_Count_Total <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA 182 Erase_Fail_Count_Total 0x0000 000 000 --- Old_age Offline - 0 182 Erase_Fail_Count_Total <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO 187 Reported_Uncorrect <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA 187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0 187 Reported_Uncorrect <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO 194 Temperature_Celsius <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA 194 Temperature_Celsius 0x0022 000 000 --- Old_age Always - 0 194 Temperature_Celsius <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO 195 Program_Failure_Blk_Ct <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA 195 Program_Failure_Blk_Ct 0x001c --- --- --- Old_age Offline - 4666526360432 196 Erase_Failure_Blk_Ct 0x0033 --- --- --- Pre-fail Always - 25700 231 Temperature_Celsius 0x0013 090 090 --- Pre-fail Always - 1 231 Temperature_Celsius <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO 233 Media_Wearout_Indicator <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA 233 Media_Wearout_Indicator 0x0000 000 000 --- Old_age Offline - 64 233 Media_Wearout_Indicator <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO 234 Unknown_Attribute <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA 234 Unknown_Attribute 0x0000 000 000 --- Old_age Offline - 128 234 Unknown_Attribute <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO 241 Total_LBAs_Written <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA 241 Total_LBAs_Written 0x0032 000 000 --- Old_age Always - 128 241 Total_LBAs_Written <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO 242 Total_LBAs_Read <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA 242 Total_LBAs_Read 0x0032 000 000 --- Old_age Always - 576 Error SMART Error Log Read failed: Eingabe-/Ausgabefehler Smartctl: SMART Error Log Read Failed Error SMART Error Self-Test Log Read failed: Eingabe-/Ausgabefehler Smartctl: SMART Self Test Log Read Failed SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. It seems that SandForce SSDs aren't well supported in smartmontools 5.39.1. The smart data attributes aren't correct. ID 5 for example is the retired block count. The correct values are listed here: http://www.ocztechnologyforum.com/forum/showthread.php?75786-SMART-Attributes- for-Sandforce-SSD-s-%28Agility2-Vertex2-VertexLE%29 Upstream the attributes were corrected: http://sourceforge.net/apps/trac/smartmontools/wiki > 2010-08-20: We added support for SSDs with SandForce controller. Only a few drive models are detected for now. If you have a drive not detected, please report this to our drive database mailinglist. An up-to-date drivedb file would fix the wrong attribute names. Furthermore a new smartmontools version (5.40) with SandForce support is available: * http://sourceforge.net/apps/trac/smartmontools/browser/tags/RELEASE_5_40/smartmontools/NEWS * http://sourceforge.net/apps/trac/smartmontools/query?group=status&milestone=Release+5.40 It would be nice if you could provide support for SandForce SSD (e. g. OCZ Vertex 2 series). Thank you. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
