Package: linux-2.6
Version: 2.6.32-23
Severity: normal
Tags: squeeze
When logging out of X, syslog writes these messages on the consoles:
Message from sysl...@phoenix at Oct 17 16:23:17 ...
kernel:[ 881.428052] Northbridge Error, node 0
Message from sysl...@phoenix at Oct 17 16:23:17 ...
kernel:[ 881.428058] Invalid GART PTE entry during table walk.
After logging out of X the GDM login screen can be found
on F8 or F9 - it jumps around after each logout.
The errors are also be written to /var/log/syslog:
Oct 17 16:23:16 phoenix console-kit-daemon[1756]: WARNING: Couldn't read
/proc/3161/environ: Failed to open file '/proc/3161/environ': No such file or
directoryOct 17 16:23:16 phoenix kernel: [ 880.939148] [drm] nouveau
0000:01:00.0: nouveau_channel_free: freeing fifo 1
Oct 17 16:23:16 phoenix console-kit-daemon[1756]: WARNING: Couldn't read
/proc/3290/environ: Failed to open file '/proc/3290/environ': No such file or
directoryOct 17 16:23:16 phoenix acpid: client 3118[0:0] has disconnected
Oct 17 16:23:16 phoenix acpid: client connected from 3338[0:0]
Oct 17 16:23:16 phoenix acpid: 1 client rule loaded
Oct 17 16:23:17 phoenix kernel: [ 881.428052] Northbridge Error, node 0
Oct 17 16:23:17 phoenix kernel: [ 881.428058] Invalid GART PTE entry during
table walk.
Oct 17 16:23:17 phoenix kernel: [ 881.517297] [drm] nouveau 0000:01:00.0:
Allocating FIFO number 1
Oct 17 16:23:17 phoenix kernel: [ 881.521677] [drm] nouveau 0000:01:00.0:
nouveau_channel_alloc: initialised FIFO 1
Oct 17 16:23:19 phoenix gdm-simple-greeter[3379]: Gtk-WARNING:
/build/buildd-gtk+2.0_2.20.1-1+b1-amd64-3ZYTFH/gtk+2.0-2.20.1/gtk/gtkwidget.c:5628:
widget not wiOct 17 16:23:20 phoenix acpid: client 3338[0:0] has disconnected
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-23) (da...@debian.org) (gcc version
4.3.5 (Debian 4.3.5-3) ) #1 SMP Fri Sep 17 21:50:19 UTC 2010
** Command line:
root=UUID=79da5c23-9229-4de5-8799-e91066946083 ro
** Not tainted
** Kernel log:
[ 5.802193] [TTM] Zone kernel: Available graphics memory: 1030524 kiB.
[ 5.802375] [drm] nouveau 0000:01:00.0: 256 MiB VRAM
[ 5.802614] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[ 5.802694] agpgart: work_for_cpu tried to set rate=x12. Setting to AGP3 x8
mode.
[ 5.802795] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[ 5.802931] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[ 5.802992] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[ 5.803399] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[ 5.808113] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised
FIFO 0
[ 5.808219] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
[ 5.808305] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 5.878478] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[ 5.878719] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 5.878861] [drm] nouveau 0000:01:00.0: Detected a TV connector
[ 5.881309] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder
(output 0)
[ 5.881387] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder
(output 1)
[ 5.881463] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder
(output 2)
[ 5.881540] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder
(output 3)
[ 6.068253] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo
ffff88007e85a200
[ 6.083163] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder
(output 2)
[ 6.083169] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0
using output A
[ 6.084452] Console: switching to colour frame buffer device 160x64
[ 6.085600] fb0: nouveaufb frame buffer device
[ 6.085607] registered panic notifier
[ 6.085619] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on
minor 0
[ 6.424019] Northbridge Error, node 0
[ 6.424036] Invalid GART PTE entry during table walk.
[ 6.484015] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
[ 6.988241] VIA 82xx Modem 0000:00:11.6: PCI INT C disabled
[ 6.988285] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
[ 6.988929] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) ->
IRQ 22
[ 6.989104] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 8.448389] Adding 3911788k swap on /dev/sda5. Priority:-1 extents:1
across:3911788k
[ 8.504441] scsi 4:0:1:0: CD-ROM TEAC CD-R55S 1.0R
PQ: 0 ANSI: 2
[ 8.504473] scsi target4:0:1: Beginning Domain Validation
[ 8.518109] scsi target4:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[ 8.533258] scsi target4:0:1: Domain Validation skipping write tests
[ 8.533270] scsi target4:0:1: Ending Domain Validation
[ 8.750639] loop: module loaded
[ 9.192138] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 9.460452] scsi target4:0:5: Multiple LUNs disabled in NVRAM
[ 10.196372] fuse init (API version 7.13)
[ 10.333835] skge eth0: enabling interface
[ 10.341570] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.002858] skge eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 12.021918] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.023512] RPC: Registered udp transport module.
[ 12.023998] RPC: Registered tcp transport module.
[ 12.024488] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.177029] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 12.355306] svc: failed to register lockdv1 RPC service (errno 97).
[ 12.357029] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 12.392526] NFSD: starting 90-second grace period
[ 12.480179] sr2: scsi-1 drive
[ 12.481580] sr 4:0:1:0: Attached scsi CD-ROM sr2
[ 12.482367] sr 4:0:1:0: Attached scsi generic sg4 type 5
[ 16.768880] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 16.773310] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised
FIFO 1
[ 17.943964] ax25spyd uses obsolete (PF_INET,SOCK_PACKET)
[ 18.129312] Bluetooth: Core ver 2.15
[ 18.129382] NET: Registered protocol family 31
[ 18.129384] Bluetooth: HCI device and connection manager initialized
[ 18.129388] Bluetooth: HCI socket layer initialized
[ 18.243998] Bluetooth: L2CAP ver 2.14
[ 18.244034] Bluetooth: L2CAP socket layer initialized
[ 18.457047] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.457052] Bluetooth: BNEP filters: protocol multicast
[ 18.509344] Bridge firewalling registered
[ 18.568198] Bluetooth: SCO (Voice Link) ver 0.6
[ 18.568203] Bluetooth: SCO socket layer initialized
[ 19.020289] lp0: using parport0 (interrupt-driven).
[ 19.154894] ppdev: user-space parallel port driver
[ 20.510658] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+
processors (1 cpu cores) (version 2.20.00)
[ 20.511790] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
[ 22.632011] eth0: no IPv6 routers present
[ 101.819346] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
[ 102.428020] Northbridge Error, node 0
[ 102.428025] Invalid GART PTE entry during table walk.
[ 102.449328] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 102.453798] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised
FIFO 1
[ 146.273838] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
[ 146.428018] Northbridge Error, node 0
[ 146.428024] Invalid GART PTE entry during table walk.
[ 146.857295] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 146.861680] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised
FIFO 1
[ 347.182825] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
[ 347.428035] Northbridge Error, node 0
[ 347.428041] Invalid GART PTE entry during table walk.
[ 347.761290] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 347.765672] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised
FIFO 1
[ 775.038033] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
[ 775.428018] Northbridge Error, node 0
[ 775.428023] Invalid GART PTE entry during table walk.
[ 775.637312] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 775.641692] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised
FIFO 1
[ 880.939148] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
[ 881.428052] Northbridge Error, node 0
[ 881.428058] Invalid GART PTE entry during table walk.
[ 881.517297] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 881.521677] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised
FIFO 1
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0226
board_vendor: ASUSTeK Computer Inc.
board_name: A8V
board_version: Rev 1.xx
** Loaded modules:
Module Size Used by
cpufreq_powersave 902 0
cpufreq_userspace 1960 0
cpufreq_stats 2659 0
cpufreq_conservative 5162 0
ppdev 5030 0
lp 7462 0
sco 7209 2
bridge 39470 0
stp 1440 1 bridge
bnep 9363 2
l2cap 24736 3 bnep
bluetooth 41763 5 sco,bnep,l2cap
rfkill 12964 2 bluetooth
nfsd 253286 11
lockd 57475 1 nfsd
nfs_acl 2031 1 nfsd
auth_rpcgss 33396 1 nfsd
sunrpc 160837 10 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 3138 1 nfsd
binfmt_misc 6399 1
fuse 49998 1
ext4 288329 1
jbd2 66759 1 ext4
crc16 1319 2 l2cap,ext4
loop 11767 0
snd_via82xx 18248 0
gameport 7384 1 snd_via82xx
snd_via82xx_modem 7652 0
snd_ac97_codec 99186 2 snd_via82xx,snd_via82xx_modem
snd_mpu401_uart 4995 1 snd_via82xx
ac97_bus 1086 1 snd_ac97_codec
snd_pcm_oss 32591 0
snd_mixer_oss 12606 1 snd_pcm_oss
amd64_edac_mod 13598 0
nouveau 352808 2
snd_pcm 60503 4
snd_via82xx,snd_via82xx_modem,snd_ac97_codec,snd_pcm_oss
ttm 39746 1 nouveau
edac_core 29261 3 amd64_edac_mod
drm_kms_helper 20033 1 nouveau
serio_raw 3752 0
sg 18712 0
sym53c8xx 64120 0
snd_seq_midi 4400 0
sr_mod 12602 0
uhci_hcd 18457 0
ehci_hcd 30895 0
drm 142151 4 nouveau,ttm,drm_kms_helper
i2c_algo_bit 4225 1 nouveau
button 4650 1 nouveau
edac_mce_amd 6401 1 amd64_edac_mod
k8temp 3155 0
pcspkr 1699 0
mxser 32101 0
usbcore 121698 3 uhci_hcd,ehci_hcd
processor 30239 0
psmouse 49729 0
floppy 49087 0
scsi_transport_spi 18742 1 sym53c8xx
parport_pc 18855 1
snd_rawmidi 15515 2 snd_mpu401_uart,snd_seq_midi
parport 27954 3 ppdev,lp,parport_pc
snd_seq_midi_event 4628 1 snd_seq_midi
sata_via 7805 0
snd_seq 42737 2 snd_seq_midi,snd_seq_midi_event
evdev 7352 4
i2c_viapro 5483 0
snd_timer 15582 2 snd_pcm,snd_seq
skge 33436 0
nls_base 6377 1 usbcore
snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
cdrom 29415 1 sr_mod
i2c_core 15680 5
nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_viapro
shpchp 26264 0
snd 46414 11
snd_via82xx,snd_via82xx_modem,snd_ac97_codec,snd_mpu401_uart,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 4598 1 snd
snd_page_alloc 6169 3 snd_via82xx,snd_via82xx_modem,snd_pcm
pci_hotplug 21203 1 shpchp
ext2 52825 1
mbcache 5050 2 ext4,ext2
sd_mod 29713 4
crc_t10dif 1276 1 sd_mod
ata_generic 2983 0
pata_via 7429 3
libata 133328 3 sata_via,ata_generic,pata_via
thermal 11674 0
thermal_sys 11942 2 processor,thermal
scsi_mod 121861 6
sg,sym53c8xx,sr_mod,scsi_transport_spi,sd_mod,libata
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge
[1106:0282]
Subsystem: ASUSTeK Computer Inc. A8V Deluxe [1043:80a3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Region 0: Memory at <ignored> (32-bit, prefetchable)
Capabilities: <access denied>
Kernel driver in use: agpgart-amd64
00:00.1 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge
[1106:1282]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.2 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge
[1106:2282]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.3 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge
[1106:3282]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.4 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge
[1106:4282]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.7 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge
[1106:7282]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI bridge
[K8T800/K8T890 South] [1106:b188] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f9f00000-fbffffff
Prefetchable memory behind bridge: e0000000-f8ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR+ <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:09.0 Serial controller [0700]: Moxa Technologies Co Ltd Smartio C168H/PCI
[1393:1680] (rev 02) (prog-if 80)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 1: I/O ports at a400 [size=128]
Region 2: I/O ports at a000 [size=64]
Region 3: I/O ports at 9800 [size=16]
Kernel driver in use: mxser
00:0a.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001
Gigabit Ethernet Controller [11ab:4320] (rev 13)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet
Controller (Asus) [1043:811a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f9900000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at a800 [size=256]
Expansion ROM at f9800000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: skge
00:0e.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c875
[1000:000f] (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 72 (4250ns min, 16000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at b000 [size=256]
Region 1: Memory at f9c00000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at f9b00000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at f9a00000 [disabled] [size=64K]
Kernel driver in use: sym53c8xx
00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420 SATA RAID
Controller [1106:3149] (rev 80)
Subsystem: ASUSTeK Computer Inc. A7V600/K8V Deluxe/K8V-X/A8V Deluxe
motherboard [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at d400 [size=8]
Region 1: I/O ports at d000 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at c400 [size=4]
Region 4: I/O ports at c000 [size=16]
Region 5: I/O ports at b800 [size=256]
Capabilities: <access denied>
Kernel driver in use: sata_via
00:0f.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
[1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 20
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at fc00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_via
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
[1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at d800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
[1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at e000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
[1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev
86) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
[1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 21
Region 0: Memory at f9e00000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge
[KT600/K8T800/K8T890 South] [1106:3227]
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
[1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
Subsystem: ASUSTeK Computer Inc. A8V Deluxe motherboard (Realtek ALC850
codec) [1043:812a]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at e800 [size=256]
Capabilities: <access denied>
Kernel driver in use: VIA 82xx Audio
00:11.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem
Controller [1106:3068] (rev 80)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at 1000 [size=256]
Capabilities: <access denied>
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
01:00.0 VGA compatible controller [0300]: nVidia Corporation G70 [GeForce 7800
GS] [10de:00f5] (rev a2) (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Device [1682:2188]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 2: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at f9f00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US.ISO-8859-15, LC_CTYPE=en_US.ISO-8859-15 (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.4 tools for generating an initramfs
ii linux-base 2.6.32-23 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-23 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii grub-legacy [grub] 0.97-63 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.26 Binary firmware for various driver
ii firmware-linux-nonfree 0.26 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
