On Mon, 2010-10-04 at 00:01 +0200, karl156 wrote: > > Please send the output of 'lspci -vnn'. And in future, use reportbug to > > send bug reports, as this will gather that information automatically. > > > > Ben. > > [...] > 01:02.0 Ethernet controller [0200]: D-Link System Inc DL2000-based > Gigabit Ethernet [1186:4000] (rev 0c) > Subsystem: D-Link System Inc DL2000-based Gigabit Ethernet > [1186:4000] > Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 23 > I/O ports at b400 [size=256] > Memory at ff0fbc00 (32-bit, non-prefetchable) [size=512] > Expansion ROM at ff0e0000 [disabled] [size=64K] > Capabilities: [50] Power Management version 2 > Kernel driver in use: dl2k [...]
OK, you have a device which should be handled by dl2k not ipg. The fix for this is simple and will be included in the next upload to unstable. As a workaround until then, you can blacklist the ipg driver. Ben. -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse.
signature.asc
Description: This is a digitally signed message part
